summaryrefslogtreecommitdiffstats
path: root/kernel
AgeCommit message (Collapse)Author
2015-02-21Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS: - a number of fixes that didn't make the 3.19 release. - a number of cleanups. - preliminary support for Cavium's Octeon 3 SOCs which feature up to 48 MIPS64 R3 cores with FPU and hardware virtualization. - support for MIPS R6 processors. Revision 6 of the MIPS architecture is a major revision of the MIPS architecture which does away with many of original sins of the architecture such as branch delay slots. This and other changes in R6 require major changes throughout the entire MIPS core architecture code and make up for the lion share of this pull request. - finally some preparatory work for eXtendend Physical Address support, which allows support of up to 40 bit of physical address space on 32 bit processors" [ Ahh, MIPS can't leave the PAE brain damage alone. It's like every CPU architect has to make that mistake, but pee in the snow by changing the TLA. But whether it's called PAE, LPAE or XPA, it's horrid crud - Linus ] * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits) MIPS: sead3: Corrected get_c0_perfcount_int MIPS: mm: Remove dead macro definitions MIPS: OCTEON: irq: add CIB and other fixes MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs. MIPS: OCTEON: More OCTEONIII support MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits. MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup. MIPS: OCTEON: Update octeon-model.h code for new SoCs. MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h MIPS: OCTEON: Implement the core-16057 workaround MIPS: OCTEON: Delete unused COP2 saving code MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register MIPS: OCTEON: Save and restore CP2 SHA3 state MIPS: OCTEON: Fix FP context save. MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs MIPS: boot: Provide more uImage options MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h MIPS: ip22-gio: Remove legacy suspend/resume support mips: pci: Add ifdef around pci_proc_domain ...
2015-02-21Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull ntp fix from Ingo Molnar: "An adjtimex interface regression fix for 32-bit systems" [ A check that was added in a previous commit is really only a concern for 64bit systems, but was applied to both 32 and 64bit systems, which results in breaking 32bit systems. Thus the fix here is to make the check only apply to 64bit systems ] * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ntp: Fixup adjtimex freq validation on 32-bit systems
2015-02-21Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Two fixes: the paravirt spin_unlock() corruption/crash fix, and an rtmutex NULL dereference crash fix" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/spinlocks/paravirt: Fix memory corruption on unlock locking/rtmutex: Avoid a NULL pointer dereference on deadlock
2015-02-21Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Thiscontains misc fixes: preempt_schedule_common() and io_schedule() recursion fixes, sched/dl fixes, a completion_done() revert, two sched/rt fixes and a comment update patch" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/rt: Avoid obvious configuration fail sched/autogroup: Fix failure to set cpu.rt_runtime_us sched/dl: Do update_rq_clock() in yield_task_dl() sched: Prevent recursion in io_schedule() sched/completion: Serialize completion_done() with complete() sched: Fix preempt_schedule_common() triggering tracing recursion sched/dl: Prevent enqueue of a sleeping task in dl_task_timer() sched: Make dl_task_time() use task_rq_lock() sched: Clarify ordering between task_rq_lock() and move_queued_task()
2015-02-21Merge branches 'core-urgent-for-linus' and 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull rcu fix and x86 irq fix from Ingo Molnar: - Fix a bug that caused an RCU warning splat. - Two x86 irq related fixes: a hotplug crash fix and an ACPI IRQ registry fix. * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Clear need_qs flag to prevent splat * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Check for valid irq descriptor in check_irq_vectors_for_cpu_disable() x86/irq: Fix regression caused by commit b568b8601f05
2015-02-20Merge tag 'for_linux-3.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb Pull kgdb/kdb updates from Jason Wessel: "KGDB/KDB New: - KDB: improved searching - No longer enter debug core on panic if panic timeout is set KGDB/KDB regressions / cleanups - fix pdf doc build errors - prevent junk characters on kdb console from printk levels" * tag 'for_linux-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb: kgdb, docs: Fix <para> pdfdocs build errors debug: prevent entering debug mode on panic/exception. kdb: Const qualifier for kdb_getstr's prompt argument kdb: Provide forward search at more prompt kdb: Fix a prompt management bug when using | grep kdb: Remove stack dump when entering kgdb due to NMI kdb: Avoid printing KERN_ levels to consoles kdb: Fix off by one error in kdb_cpu() kdb: fix incorrect counts in KDB summary command output
2015-02-19debug: prevent entering debug mode on panic/exception.Colin Cross
On non-developer devices, kgdb prevents the device from rebooting after a panic. Incase of panics and exceptions, to allow the device to reboot, prevent entering debug mode to avoid getting stuck waiting for the user to interact with debugger. To avoid entering the debugger on panic/exception without any extra configuration, panic_timeout is being used which can be set via /proc/sys/kernel/panic at run time and CONFIG_PANIC_TIMEOUT sets the default value. Setting panic_timeout indicates that the user requested machine to perform unattended reboot after panic. We dont want to get stuck waiting for the user input incase of panic. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: kgdb-bugreport@lists.sourceforge.net Cc: linux-kernel@vger.kernel.org Cc: Android Kernel Team <kernel-team@android.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Colin Cross <ccross@android.com> [Kiran: Added context to commit message. panic_timeout is used instead of break_on_panic and break_on_exception to honor CONFIG_PANIC_TIMEOUT Modified the commit as per community feedback] Signed-off-by: Kiran Raparthy <kiran.kumar@linaro.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Const qualifier for kdb_getstr's prompt argumentDaniel Thompson
All current callers of kdb_getstr() can pass constant pointers via the prompt argument. This patch adds a const qualification to make explicit the fact that this is safe. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Provide forward search at more promptDaniel Thompson
Currently kdb allows the output of comamnds to be filtered using the | grep feature. This is useful but does not permit the output emitted shortly after a string match to be examined without wading through the entire unfiltered output of the command. Such a feature is particularly useful to navigate function traces because these traces often have a useful trigger string *before* the point of interest. This patch reuses the existing filtering logic to introduce a simple forward search to kdb that can be triggered from the more prompt. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Fix a prompt management bug when using | grepDaniel Thompson
Currently when the "| grep" feature is used to filter the output of a command then the prompt is not displayed for the subsequent command. Likewise any characters typed by the user are also not echoed to the display. This rather disconcerting problem eventually corrects itself when the user presses Enter and the kdb_grepping_flag is cleared as kdb_parse() tries to make sense of whatever they typed. This patch resolves the problem by moving the clearing of this flag from the middle of command processing to the beginning. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Remove stack dump when entering kgdb due to NMIDaniel Thompson
Issuing a stack dump feels ergonomically wrong when entering due to NMI. Entering due to NMI is normally a reaction to a user request, either the NMI button on a server or a "magic knock" on a UART. Therefore the backtrace behaviour on entry due to NMI should be like SysRq-g (no stack dump) rather than like oops. Note also that the stack dump does not offer any information that cannot be trivial retrieved using the 'bt' command. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Avoid printing KERN_ levels to consolesDaniel Thompson
Currently when kdb traps printk messages then the raw log level prefix (consisting of '\001' followed by a numeral) does not get stripped off before the message is issued to the various I/O handlers supported by kdb. This causes annoying visual noise as well as causing problems grepping for ^. It is also a change of behaviour compared to normal usage of printk() usage. For example <SysRq>-h ends up with different output to that of kdb's "sr h". This patch addresses the problem by stripping log levels from messages before they are issued to the I/O handlers. printk() which can also act as an i/o handler in some cases is special cased; if the caller provided a log level then the prefix will be preserved when sent to printk(). The addition of non-printable characters to the output of kdb commands is a regression, albeit and extremely elderly one, introduced by commit 04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte pattern"). Note also that this patch does *not* restore the original behaviour from v3.5. Instead it makes printk() from within a kdb command display the message without any prefix (i.e. like printk() normally does). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Cc: Joe Perches <joe@perches.com> Cc: stable@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: Fix off by one error in kdb_cpu()Jason Wessel
There was a follow on replacement patch against the prior "kgdb: Timeout if secondary CPUs ignore the roundup". See: https://lkml.org/lkml/2015/1/7/442 This patch is the delta vs the patch that was committed upstream: * Fix an off-by-one error in kdb_cpu(). * Replace NR_CPUS with CONFIG_NR_CPUS to tell checkpatch that we really want a static limit. * Removed the "KGDB: " prefix from the pr_crit() in debug_core.c (kgdb-next contains a patch which introduced pr_fmt() to this file to the tag will now be applied automatically). Cc: Daniel Thompson <daniel.thompson@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19kdb: fix incorrect counts in KDB summary command outputJay Lan
The output of KDB 'summary' command should report MemTotal, MemFree and Buffers output in kB. Current codes report in unit of pages. A define of K(x) as is defined in the code, but not used. This patch would apply the define to convert the values to kB. Please include me on Cc on replies. I do not subscribe to linux-kernel. Signed-off-by: Jay Lan <jlan@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2015-02-19Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - several cleanups in kbuild - serialize multiple *config targets so that 'make defconfig kvmconfig' works - The cc-ifversion macro got support for an else-branch * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild,gcov: simplify kernel/gcov/Makefile more kbuild: allow cc-ifversion to have the argument for false condition kbuild,gcov: simplify kernel/gcov/Makefile kbuild,gcov: remove unnecessary workaround kbuild: do not add $(call ...) to invoke cc-version or cc-fullversion kbuild: fix cc-ifversion macro kbuild: drop $(version_h) from MRPROPER_FILES kbuild: use mixed-targets when two or more config targets are given kbuild: remove redundant line from bounds.h/asm-offsets.h kbuild: merge bounds.h and asm-offsets.h rules kbuild: Drop support for clean-rule
2015-02-18Merge branch 'rcu/next' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull RCU fix from Paul E. McKenney. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched/rt: Avoid obvious configuration failPeter Zijlstra
Setting the root group's cpu.rt_runtime_us to 0 is a bad thing; it would disallow the kernel creating RT tasks. One can of course still set it to 1, which will (likely) still wreck your kernel, but at least make it clear that setting it to 0 is not good. Collect both sanity checks into the one place while we're there. Suggested-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150209112715.GO24151@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched/autogroup: Fix failure to set cpu.rt_runtime_usPeter Zijlstra
Because task_group() uses a cache of autogroup_task_group(), whose output depends on sched_class, switching classes can generate problems. In particular, when started as fair, the cache points to the autogroup, so when switching to RT the tg_rt_schedulable() test fails for every cpu.rt_{runtime,period}_us change because now the autogroup has tasks and no runtime. Furthermore, going back to the previous semantics of varying task_group() with sched_class has the down-side that the sched_debug output varies as well, even though the task really is in the autogroup. Therefore add an autogroup exception to tg_has_rt_tasks() -- such that both (all) task_group() usages in sched/core now have one. And remove all the remnants of the variable task_group() output. Reported-by: Zefan Li <lizefan@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Stefan Bader <stefan.bader@canonical.com> Fixes: 8323f26ce342 ("sched: Fix race in task_group()") Link: http://lkml.kernel.org/r/20150209112237.GR5029@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched/dl: Do update_rq_clock() in yield_task_dl()Kirill Tkhai
update_curr_dl() needs actual rq clock. Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1423040972.18770.10.camel@tkhai Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18ntp: Fixup adjtimex freq validation on 32-bit systemsJohn Stultz
Additional validation of adjtimex freq values to avoid potential multiplication overflows were added in commit 5e5aeb4367b (time: adjtimex: Validate the ADJ_FREQUENCY values) Unfortunately the patch used LONG_MAX/MIN instead of LLONG_MAX/MIN, which was fine on 64-bit systems, but being much smaller on 32-bit systems caused false positives resulting in most direct frequency adjustments to fail w/ EINVAL. ntpd only does direct frequency adjustments at startup, so the issue was not as easily observed there, but other time sync applications like ptpd and chrony were more effected by the bug. See bugs: https://bugzilla.kernel.org/show_bug.cgi?id=92481 https://bugzilla.redhat.com/show_bug.cgi?id=1188074 This patch changes the checks to use LLONG_MAX for clarity, and additionally the checks are disabled on 32-bit systems since LLONG_MAX/PPM_SCALE is always larger then the 32-bit long freq value, so multiplication overflows aren't possible there. Reported-by: Josh Boyer <jwboyer@fedoraproject.org> Reported-by: George Joseph <george.joseph@fairview5.com> Tested-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <stable@vger.kernel.org> # v3.19+ Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1423553436-29747-1-git-send-email-john.stultz@linaro.org [ Prettified the changelog and the comments a bit. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched: Prevent recursion in io_schedule()NeilBrown
io_schedule() calls blk_flush_plug() which, depending on the contents of current->plug, can initiate arbitrary blk-io requests. Note that this contrasts with blk_schedule_flush_plug() which requires all non-trivial work to be handed off to a separate thread. This makes it possible for io_schedule() to recurse, and initiating block requests could possibly call mempool_alloc() which, in times of memory pressure, uses io_schedule(). Apart from any stack usage issues, io_schedule() will not behave correctly when called recursively as delayacct_blkio_start() does not allow for repeated calls. So: - use ->in_iowait to detect recursion. Set it earlier, and restore it to the old value. - move the call to "raw_rq" after the call to blk_flush_plug(). As this is some sort of per-cpu thing, we want some chance that we are on the right CPU - When io_schedule() is called recurively, use blk_schedule_flush_plug() which cannot further recurse. - as this makes io_schedule() a lot more complex and as io_schedule() must match io_schedule_timeout(), but all the changes in io_schedule_timeout() and make io_schedule a simple wrapper for that. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [ Moved the now rudimentary io_schedule() into sched.h. ] Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Tony Battersby <tonyb@cybernetics.com> Link: http://lkml.kernel.org/r/20150213162600.059fffb2@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched/completion: Serialize completion_done() with complete()Oleg Nesterov
Commit de30ec47302c "Remove unnecessary ->wait.lock serialization when reading completion state" was not correct, without lock/unlock the code like stop_machine_from_inactive_cpu() while (!completion_done()) cpu_relax(); can return before complete() finishes its spin_unlock() which writes to this memory. And spin_unlock_wait(). While at it, change try_wait_for_completion() to use READ_ONCE(). Reported-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reported-by: Davidlohr Bueso <dave@stgolabs.net> Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [ Added a comment with the barrier. ] Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: raghavendra.kt@linux.vnet.ibm.com Cc: waiman.long@hp.com Fixes: de30ec47302c ("sched/completion: Remove unnecessary ->wait.lock serialization when reading completion state") Link: http://lkml.kernel.org/r/20150212195913.GA30430@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched: Fix preempt_schedule_common() triggering tracing recursionFrederic Weisbecker
Since the function graph tracer needs to disable preemption, it might call preempt_schedule() after reenabling it if something triggered the need for rescheduling in between. Therefore we can't trace preempt_schedule() itself because we would face a function tracing recursion otherwise as the tracer is always called before PREEMPT_ACTIVE gets set to prevent that recursion. This is why preempt_schedule() is tagged as "notrace". But the same issue applies to every function called by preempt_schedule() before PREEMPT_ACTIVE is actually set. And preempt_schedule_common() is one such example. Unfortunately we forgot to tag it as notrace as well and as a result we are encountering tracing recursion since it got introduced by: a18b5d0181923 ("sched: Fix missing preemption opportunity") Let's fix that by applying the appropriate function tag to preempt_schedule_common(). Reported-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Steven Rostedt <rostedt@goodmis.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1424110807-15057-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched/dl: Prevent enqueue of a sleeping task in dl_task_timer()Kirill Tkhai
A deadline task may be throttled and dequeued at the same time. This happens, when it becomes throttled in schedule(), which is called to go to sleep: current->state = TASK_INTERRUPTIBLE; schedule() deactivate_task() dequeue_task_dl() update_curr_dl() start_dl_timer() __dequeue_task_dl() prev->on_rq = 0; Later the timer fires, but the task is still dequeued: dl_task_timer() enqueue_task_dl() /* queues on dl_rq; on_rq remains 0 */ Someone wakes it up: try_to_wake_up() enqueue_dl_entity() BUG_ON(on_dl_rq()) Patch fixes this problem, it prevents queueing !on_rq tasks on dl_rq. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> [ Wrote comment. ] Cc: Juri Lelli <juri.lelli@arm.com> Fixes: 1019a359d3dc ("sched/deadline: Fix stale yield state") Link: http://lkml.kernel.org/r/1374601424090314@web4j.yandex.ru Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched: Make dl_task_time() use task_rq_lock()Peter Zijlstra
Kirill reported that a dl task can be throttled and dequeued at the same time. This happens, when it becomes throttled in schedule(), which is called to go to sleep: current->state = TASK_INTERRUPTIBLE; schedule() deactivate_task() dequeue_task_dl() update_curr_dl() start_dl_timer() __dequeue_task_dl() prev->on_rq = 0; This invalidates the assumption from commit 0f397f2c90ce ("sched/dl: Fix race in dl_task_timer()"): "The only reason we don't strictly need ->pi_lock now is because we're guaranteed to have p->state == TASK_RUNNING here and are thus free of ttwu races". And therefore we have to use the full task_rq_lock() here. This further amends the fact that we forgot to update the rq lock loop for TASK_ON_RQ_MIGRATE, from commit cca26e8009d1 ("sched: Teach scheduler to understand TASK_ON_RQ_MIGRATING state"). Reported-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Link: http://lkml.kernel.org/r/20150217123139.GN5029@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18sched: Clarify ordering between task_rq_lock() and move_queued_task()Peter Zijlstra
There was a wee bit of confusion around the exact ordering here; clarify things. Reported-by: Kirill Tkhai <ktkhai@parallels.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20150217121258.GM5029@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-18locking/rtmutex: Avoid a NULL pointer dereference on deadlockSebastian Andrzej Siewior
With task_blocks_on_rt_mutex() returning early -EDEADLK we never add the waiter to the waitqueue. Later, we try to remove it via remove_waiter() and go boom in rt_mutex_top_waiter() because rb_entry() gives a NULL pointer. ( Tested on v3.18-RT where rtmutex is used for regular mutex and I tried to get one twice in a row. ) Not sure when this started but I guess 397335f004f4 ("rtmutex: Fix deadlock detector for real") or commit 3d5c9340d194 ("rtmutex: Handle deadlock detection smarter"). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> # for v3.16 and later kernels Link: http://lkml.kernel.org/r/1424187823-19600-1-git-send-email-bigeasy@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-17Merge branch 'getname2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull getname/putname updates from Al Viro: "Rework of getname/getname_kernel/etc., mostly from Paul Moore. Gets rid of quite a pile of kludges between namei and audit..." * 'getname2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: audit: replace getname()/putname() hacks with reference counters audit: fix filename matching in __audit_inode() and __audit_inode_child() audit: enable filename recording via getname_kernel() simpler calling conventions for filename_mountpoint() fs: create proper filename objects using getname_kernel() fs: rework getname_kernel to handle up to PATH_MAX sized filenames cut down the number of do_path_lookup() callers
2015-02-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc VFS updates from Al Viro: "This cycle a lot of stuff sits on topical branches, so I'll be sending more or less one pull request per branch. This is the first pile; more to follow in a few. In this one are several misc commits from early in the cycle (before I went for separate branches), plus the rework of mntput/dput ordering on umount, switching to use of fs_pin instead of convoluted games in namespace_unlock()" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: switch the IO-triggering parts of umount to fs_pin new fs_pin killing logics allow attaching fs_pin to a group not associated with some superblock get rid of the second argument of acct_kill() take count and rcu_head out of fs_pin dcache: let the dentry count go down to zero without taking d_lock pull bumping refcount into ->kill() kill pin_put() mode_t whack-a-mole: chelsio file->f_path.dentry is pinned down for as long as the file is open... get rid of lustre_dump_dentry() gut proc_register() a bit kill d_validate() ncpfs: get rid of d_validate() nonsense selinuxfs: don't open-code d_genocide()
2015-02-17Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: - a pile of minor fs fixes and cleanups - kexec updates - random misc fixes in various places: vmcore, rbtree, eventfd, ipc, seccomp. - a series of python-based kgdb helper scripts * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (58 commits) seccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNO samples/seccomp: improve label helper ipc,sem: use current->state helpers scripts/gdb: disable pagination while printing from breakpoint handler scripts/gdb: define maintainer scripts/gdb: convert CpuList to generator function scripts/gdb: convert ModuleList to generator function scripts/gdb: use a generator instead of iterator for task list scripts/gdb: ignore byte-compiled python files scripts/gdb: port to python3 / gdb7.7 scripts/gdb: add basic documentation scripts/gdb: add lx-lsmod command scripts/gdb: add class to iterate over CPU masks scripts/gdb: add lx_current convenience function scripts/gdb: add internal helper and convenience function for per-cpu lookup scripts/gdb: add get_gdbserver_type helper scripts/gdb: add internal helper and convenience function to retrieve thread_info scripts/gdb: add is_target_arch helper scripts/gdb: add helper and convenience function to look up tasks scripts/gdb: add task iteration class ...
2015-02-17seccomp: cap SECCOMP_RET_ERRNO data to MAX_ERRNOKees Cook
The value resulting from the SECCOMP_RET_DATA mask could exceed MAX_ERRNO when setting errno during a SECCOMP_RET_ERRNO filter action. This makes sure we have a reliable value being set, so that an invalid errno will not be ignored by userspace. Signed-off-by: Kees Cook <keescook@chromium.org> Reported-by: Dmitry V. Levin <ldv@altlinux.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17kernel/module.c: do not inline do_init_module()Jan Kiszka
This provides a reliable breakpoint target, required for automatic symbol loading via the gdb helper command 'lx-symbols'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17kexec: simplify conditionalGeoff Levand
Simplify the code around one of the conditionals in the kexec_load syscall routine. The original code was confusing with a redundant check on KEXEC_ON_CRASH and comments outside of the conditional block. This change switches the order of the conditional check, and cleans up the comments for the conditional. There is no functional change to the code. Signed-off-by: Geoff Levand <geoff@infradead.org> Acked-by: Vivek Goyal <vgoyal@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Maximilian Attems <max@stro.at> Cc: Michal Marek <mmarek@suse.cz> Cc: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17kexec: fix a typo in commentAlexander Kuleshov
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17kexec: remove never used member destination in kimageBaoquan He
struct kimage has a member destination which is used to store the real destination address of each page when load segment from user space buffer to kernel. But we never retrieve the value stored in kimage->destination, so this member variable in kimage and its assignment operation are redundent code. I guess for_each_kimage_entry just does the work that kimage->destination is expected to do. So in this patch just make a cleanup to remove it. Signed-off-by: Baoquan He <bhe@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17signal: use current->state helpersDavidlohr Bueso
Call __set_current_state() instead of assigning the new state directly. These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments, keeping track of who changed the state. Signed-off-by: Davidlohr Bueso <dbueso@suse.de> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17ptrace: remove linux/compat.h inclusion under CONFIG_COMPATFabian Frederick
Commit 84c751bd4aeb ("ptrace: add ability to retrieve signals without removing from a queue (v4)") includes <linux/compat.h> globally in ptrace.c This patch removes inclusion under if defined CONFIG_COMPAT. Signed-off-by: Fabian Frederick <fabf@skynet.be> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-17Merge tag 'suspend-to-idle-3.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull suspend-to-idle updates from Rafael Wysocki: "Suspend-to-idle timer quiescing support for v3.20-rc1 Until now suspend-to-idle has not been able to save much more energy than runtime PM because of timer interrupts that periodically bring CPUs out of idle while they are waiting for a wakeup interrupt. Of course, the timer interrupts are not wakeup ones, so the handling of them can be deferred until a real wakeup interrupt happens, but at the same time we don't want to mass-expire timers at that point. The solution is to suspend the entire timekeeping when the last CPU is entering an idle state and resume it when the first CPU goes out of idle. That has to be done with care, though, so as to avoid accessing suspended clocksources etc. end we need extra support from idle drivers for that. This series of commits adds support for quiescing timers during suspend-to-idle and adds the requisite callbacks to intel_idle and the ACPI cpuidle driver" * tag 'suspend-to-idle-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / idle: Implement ->enter_freeze callback routine intel_idle: Add ->enter_freeze callbacks PM / sleep: Make it possible to quiesce timers during suspend-to-idle timekeeping: Make it safe to use the fast timekeeper while suspended timekeeping: Pass readout base to update_fast_timekeeper() PM / sleep: Re-implement suspend-to-idle handling
2015-02-16Merge branch 'irq-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irqchip updates from Ingo Molnar: "Various irqchip driver updates, plus a genirq core update that allows the initial spreading of irqs amonst CPUs without having to do it from user-space" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Fix null pointer reference in irq_set_affinity_hint() irqchip: gic: Allow interrupt level to be set for PPIs irqchip: mips-gic: Handle pending interrupts once in __gic_irq_dispatch() irqchip: Conexant CX92755 interrupts controller driver irqchip: Devicetree: document Conexant Digicolor irq binding irqchip: omap-intc: Remove unused legacy interface for omap2 irqchip: omap-intc: Fix support for dm814 and dm816 irqchip: mtk-sysirq: Get irq number from register resource size irqchip: renesas-intc-irqpin: r8a7779 IRLM setup support genirq: Set initial affinity in irq_set_affinity_hint()
2015-02-16Merge branch 'perf-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf updates from Ingo Molnar: "This series tightens up RDPMC permissions: currently even highly sandboxed x86 execution environments (such as seccomp) have permission to execute RDPMC, which may leak various perf events / PMU state such as timing information and other CPU execution details. This 'all is allowed' RDPMC mode is still preserved as the (non-default) /sys/devices/cpu/rdpmc=2 setting. The new default is that RDPMC access is only allowed if a perf event is mmap-ed (which is needed to correctly interpret RDPMC counter values in any case). As a side effect of these changes CR4 handling is cleaned up in the x86 code and a shadow copy of the CR4 value is added. The extra CR4 manipulation adds ~ <50ns to the context switch cost between rdpmc-capable and rdpmc-non-capable mms" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86: Add /sys/devices/cpu/rdpmc=2 to allow rdpmc for all tasks perf/x86: Only allow rdpmc if a perf_event is mapped perf: Pass the event to arch_perf_update_userpage() perf: Add pmu callbacks to track event mapping and unmapping x86: Add a comment clarifying LDT context switching x86: Store a per-cpu shadow copy of CR4 x86: Clean up cr4 manipulation
2015-02-15PM / sleep: Make it possible to quiesce timers during suspend-to-idleRafael J. Wysocki
The efficiency of suspend-to-idle depends on being able to keep CPUs in the deepest available idle states for as much time as possible. Ideally, they should only be brought out of idle by system wakeup interrupts. However, timer interrupts occurring periodically prevent that from happening and it is not practical to chase all of the "misbehaving" timers in a whack-a-mole fashion. A much more effective approach is to suspend the local ticks for all CPUs and the entire timekeeping along the lines of what is done during full suspend, which also helps to keep suspend-to-idle and full suspend reasonably similar. The idea is to suspend the local tick on each CPU executing cpuidle_enter_freeze() and to make the last of them suspend the entire timekeeping. That should prevent timer interrupts from triggering until an IO interrupt wakes up one of the CPUs. It needs to be done with interrupts disabled on all of the CPUs, though, because otherwise the suspended clocksource might be accessed by an interrupt handler which might lead to fatal consequences. Unfortunately, the existing ->enter callbacks provided by cpuidle drivers generally cannot be used for implementing that, because some of them re-enable interrupts temporarily and some idle entry methods cause interrupts to be re-enabled automatically on exit. Also some of these callbacks manipulate local clock event devices of the CPUs which really shouldn't be done after suspending their ticks. To overcome that difficulty, introduce a new cpuidle state callback, ->enter_freeze, that will be guaranteed (1) to keep interrupts disabled all the time (and return with interrupts disabled) and (2) not to touch the CPU timer devices. Modify cpuidle_enter_freeze() to look for the deepest available idle state with ->enter_freeze present and to make the CPU execute that callback with suspended tick (and the last of the online CPUs to execute it with suspended timekeeping). Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-02-15timekeeping: Make it safe to use the fast timekeeper while suspendedRafael J. Wysocki
Theoretically, ktime_get_mono_fast_ns() may be executed after timekeeping has been suspended (or before it is resumed) which in turn may lead to undefined behavior, for example, when the clocksource read from timekeeping_get_ns() called by it is not accessible at that time. Prevent that from happening by setting up a dummy readout base for the fast timekeeper during timekeeping_suspend() such that it will always return the same number of cycles. After the last timekeeping_update() in timekeeping_suspend() the clocksource is read and the result is stored as cycles_at_suspend. The readout base from the current timekeeper is copied onto the dummy and the ->read pointer of the dummy is set to a routine unconditionally returning cycles_at_suspend. Next, the dummy is passed to update_fast_timekeeper(). Then, ktime_get_mono_fast_ns() will work until the subsequent timekeeping_resume() and the proper readout base for the fast timekeeper will be restored by the timekeeping_update() called right after clearing timekeeping_suspended. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: John Stultz <john.stultz@linaro.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
2015-02-13kprobes: makes kprobes/enabled works correctly for optimized kprobes.Wang Nan
debugfs/kprobes/enabled doesn't work correctly on optimized kprobes. Masami Hiramatsu has a test report on x86_64 platform: https://lkml.org/lkml/2015/1/19/274 This patch forces it to unoptimize kprobe if kprobes_all_disarmed is set. It also checks the flag in unregistering path for skipping unneeded disarming process when kprobes globally disarmed. Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13kprobes: set kprobes_all_disarmed earlier to enable re-optimization.Wang Nan
In original code, the probed instruction doesn't get optimized after echo 0 > /sys/kernel/debug/kprobes/enabled echo 1 > /sys/kernel/debug/kprobes/enabled This is because original code checks kprobes_all_disarmed in optimize_kprobe(), but this flag is turned off after calling that function. Therefore, optimize_kprobe() will see kprobes_all_disarmed == true and doesn't do the optimization. This patch simply turns off kprobes_all_disarmed earlier to enable optimization. Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13kasan: enable instrumentation of global variablesAndrey Ryabinin
This feature let us to detect accesses out of bounds of global variables. This will work as for globals in kernel image, so for globals in modules. Currently this won't work for symbols in user-specified sections (e.g. __init, __read_mostly, ...) The idea of this is simple. Compiler increases each global variable by redzone size and add constructors invoking __asan_register_globals() function. Information about global variable (address, size, size with redzone ...) passed to __asan_register_globals() so we could poison variable's redzone. This patch also forces module_alloc() to return 8*PAGE_SIZE aligned address making shadow memory handling ( kasan_module_alloc()/kasan_module_free() ) more simple. Such alignment guarantees that each shadow page backing modules address space correspond to only one module_alloc() allocation. Signed-off-by: Andrey Ryabinin <a.ryabinin@samsung.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Konstantin Serebryany <kcc@google.com> Cc: Dmitry Chernenkov <dmitryc@google.com> Signed-off-by: Andrey Konovalov <adech.fo@gmail.com> Cc: Yuri Gribov <tetra2005@gmail.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13profile: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13irq: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13padata: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13tracing: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-13workqueue: use %*pb[l] to format bitmaps including cpumasks and nodemasksTejun Heo
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>