Age | Commit message (Collapse) | Author |
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Arrays with designated initializers have an implicit length of the highest
initialized value plus one. I used this to ensure that newly added entries
in enum bpf_reg_type get a NULL entry in compatible_reg_types.
This is difficult to understand since it requires knowledge of the
peculiarities of designated initializers. Use __BPF_ARG_TYPE_MAX to size
the array instead.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200923160156.80814-1-lmb@cloudflare.com
|
|
Two minor conflicts:
1) net/ipv4/route.c, adding a new local variable while
moving another local variable and removing it's
initial assignment.
2) drivers/net/dsa/microchip/ksz9477.c, overlapping changes.
One pretty prints the port mode differently, whilst another
changes the driver to try and obtain the port mode from
the port node rather than the switch node.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from Jakub Kicinski:
- fix failure to add bond interfaces to a bridge, the offload-handling
code was too defensive there and recent refactoring unearthed that.
Users complained (Ido)
- fix unnecessarily reflecting ECN bits within TOS values / QoS marking
in TCP ACK and reset packets (Wei)
- fix a deadlock with bpf iterator. Hopefully we're in the clear on
this front now... (Yonghong)
- BPF fix for clobbering r2 in bpf_gen_ld_abs (Daniel)
- fix AQL on mt76 devices with FW rate control and add a couple of AQL
issues in mac80211 code (Felix)
- fix authentication issue with mwifiex (Maximilian)
- WiFi connectivity fix: revert IGTK support in ti/wlcore (Mauro)
- fix exception handling for multipath routes via same device (David
Ahern)
- revert back to a BH spin lock flavor for nsid_lock: there are paths
which do require the BH context protection (Taehee)
- fix interrupt / queue / NAPI handling in the lantiq driver (Hauke)
- fix ife module load deadlock (Cong)
- make an adjustment to netlink reply message type for code added in
this release (the sole change touching uAPI here) (Michal)
- a number of fixes for small NXP and Microchip switches (Vladimir)
[ Pull request acked by David: "you can expect more of this in the
future as I try to delegate more things to Jakub" ]
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (167 commits)
net: mscc: ocelot: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: seville: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
net: dsa: felix: fix some key offsets for IP4_TCP_UDP VCAP IS2 entries
inet_diag: validate INET_DIAG_REQ_PROTOCOL attribute
net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU
net: Update MAINTAINERS for MediaTek switch driver
net/mlx5e: mlx5e_fec_in_caps() returns a boolean
net/mlx5e: kTLS, Avoid kzalloc(GFP_KERNEL) under spinlock
net/mlx5e: kTLS, Fix leak on resync error flow
net/mlx5e: kTLS, Add missing dma_unmap in RX resync
net/mlx5e: kTLS, Fix napi sync and possible use-after-free
net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported
net/mlx5e: Fix using wrong stats_grps in mlx5e_update_ndo_stats()
net/mlx5e: Fix multicast counter not up-to-date in "ip -s"
net/mlx5e: Fix endianness when calculating pedit mask first bit
net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported
net/mlx5e: CT: Fix freeing ct_label mapping
net/mlx5e: Fix memory leak of tunnel info when rule under multipath not ready
net/mlx5e: Use synchronize_rcu to sync with NAPI
net/mlx5e: Use RCU to protect rq->xdp_prog
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check kprobe is enabled before unregistering from ftrace as it isn't
registered when disabled.
- Remove kprobes enabled via command-line that is on init text when
freed.
- Add missing RCU synchronization for ftrace trampoline symbols removed
from kallsyms.
- Free trampoline on error path if ftrace_startup() fails.
- Give more space for the longer PID numbers in trace output.
- Fix a possible double free in the histogram code.
- A couple of fixes that were discovered by sparse.
* tag 'trace-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
bootconfig: init: make xbc_namebuf static
kprobes: tracing/kprobes: Fix to kill kprobes on initmem after boot
tracing: fix double free
ftrace: Let ftrace_enable_sysctl take a kernel pointer buffer
tracing: Make the space reserved for the pid wider
ftrace: Fix missing synchronize_rcu() removing trampoline from kallsyms
ftrace: Free the trampoline when ftrace_startup() fails
kprobes: Fix to check probe enabled before disarm_kprobe_ftrace()
|
|
Some kernels builds might inline vfs_getattr call within fstat
syscall code path, so fentry/vfs_getattr trampoline is not called.
Add security_inode_getattr to allowlist and switch the d_path test stat
trampoline to security_inode_getattr.
Keeping dentry_open and filp_close, because they are in their own
files, so unlikely to be inlined, but in case they are, adding
security_file_open.
Adding flags that indicate trampolines were called and failing
the test if any of them got missed, so it's easier to identify
the issue next time.
Fixes: e4d1af4b16f8 ("selftests/bpf: Add test for d_path helper")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200918112338.2618444-1-jolsa@kernel.org
|
|
The mapping between bpf_arg_type and bpf_reg_type is encoded in a big
hairy if statement that is hard to follow. The debug output also leaves
to be desired: if a reg_type doesn't match we only print one of the
options, instead printing all the valid ones.
Convert the if statement into a table which is then used to drive type
checking. If none of the reg_types match we print all options, e.g.:
R2 type=rdonly_buf expected=fp, pkt, pkt_meta, map_value
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-12-lmb@cloudflare.com
|
|
check_func_arg has a plethora of weird if statements with empty branches.
They work around the fact that *_OR_NULL argument types should accept a
SCALAR_VALUE register, as long as it's value is 0. These statements make
it difficult to reason about the type checking logic.
Instead, skip more detailed type checking logic iff the register is 0,
and the function expects a nullable type. This allows simplifying the type
checking itself.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-11-lmb@cloudflare.com
|
|
Move the check for PTR_TO_MAP_VALUE to check_func_arg, where all other
checking is done as well. Move the invocation of process_spin_lock away
from the register type checking, to allow a future refactoring.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-10-lmb@cloudflare.com
|
|
If we encounter a pointer to memory, we set meta->raw_mode depending
on the type of memory we point at. What isn't obvious is that this
information is only used when the next memory size argument is
encountered.
Move the assignment closer to where it's used, and add a comment that
explains what is going on.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-9-lmb@cloudflare.com
|
|
Always check context access if the register we're operating on is
PTR_TO_CTX, rather than relying on ARG_PTR_TO_CTX. This allows
simplifying the arg_type checking section of the function.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-8-lmb@cloudflare.com
|
|
Instead of dealing with reg->ref_obj_id individually for every arg type that
needs it, rely on the fact that ref_obj_id is zero if the register is not
reference tracked.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-7-lmb@cloudflare.com
|
|
Perform BTF type checks if the register we're working on contains a BTF
pointer, rather than if the argument is for a BTF pointer. This is easier
to understand, and allows removing the code from the arg_type checking
section of the function.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-6-lmb@cloudflare.com
|
|
Function prototypes using ARG_PTR_TO_BTF_ID currently use two ways to signal
which BTF IDs are acceptable. First, bpf_func_proto.btf_id is an array of
IDs, one for each argument. This array is only accessed up to the highest
numbered argument that uses ARG_PTR_TO_BTF_ID and may therefore be less than
five arguments long. It usually points at a BTF_ID_LIST. Second, check_btf_id
is a function pointer that is called by the verifier if present. It gets the
actual BTF ID of the register, and the argument number we're currently checking.
It turns out that the only user check_arg_btf_id ignores the argument, and is
simply used to check whether the BTF ID has a struct sock_common at it's start.
Replace both of these mechanisms with an explicit BTF ID for each argument
in a function proto. Thanks to btf_struct_ids_match this is very flexible:
check_arg_btf_id can be replaced by requiring struct sock_common.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-5-lmb@cloudflare.com
|
|
Move the check for a NULL or zero register to check_helper_mem_access. This
makes check_stack_boundary easier to understand.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-3-lmb@cloudflare.com
|
|
bsearch doesn't modify the contents of the array, so we can take a const pointer.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200921121227.255763-2-lmb@cloudflare.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
"This contains a single commit that fixes a bug that was introduced in
the last merge window. This bug causes a compiler warning complaining
about show_rcu_tasks_classic_gp_kthread() being an unused static
function in !SMP kernels.
The fix is straightforward, just adding an 'inline' to make this a
static inline function, thus avoiding the warning.
This bug was reported by Laurent Pinchart, who would like it fixed
sooner rather than later"
* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
rcu-tasks: Prevent complaints of unused show_rcu_tasks_classic_gp_kthread()
|
|
The in_atomic() macro cannot always detect atomic context, in particular,
it cannot know about held spinlocks in non-preemptible kernels. Although,
there is no user call bpf_link_put() with holding spinlock now, be on the
safe side, so we can avoid this in the future.
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200917074453.20621-1-songmuchun@bytedance.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull syscall tracing fix from Borislav Petkov:
"Fix the seccomp syscall rewriting so that trace and audit see the
rewritten syscall number, from Kees Cook"
* tag 'core_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
core/entry: Report syscall correctly for trace and audit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fixes from Borislav Petkov:
"Two fixes from the locking/urgent pile:
- Fix lockdep's detection of "USED" <- "IN-NMI" inversions (Peter
Zijlstra)
- Make percpu-rwsem operations on the semaphore's ->read_count
IRQ-safe because it can be used in an IRQ context (Hou Tao)"
* tag 'locking_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/percpu-rwsem: Use this_cpu_{inc,dec}() for read_count
locking/lockdep: Fix "USED" <- "IN-NMI" inversions
|
|
Merge fixes from Andrew Morton:
"15 patches.
Subsystems affected by this patch series: mailmap, mm/hotfixes,
mm/thp, mm/memory-hotplug, misc, kcsan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kcsan: kconfig: move to menu 'Generic Kernel Debugging Instruments'
fs/fs-writeback.c: adjust dirtytime_interval_handler definition to match prototype
stackleak: let stack_erasing_sysctl take a kernel pointer buffer
ftrace: let ftrace_enable_sysctl take a kernel pointer buffer
mm/memory_hotplug: drain per-cpu pages again during memory offline
selftests/vm: fix display of page size in map_hugetlb
mm/thp: fix __split_huge_pmd_locked() for migration PMD
kprobes: fix kill kprobe which has been marked as gone
tmpfs: restore functionality of nr_inodes=0
mlock: fix unevictable_pgs event counts on THP
mm: fix check_move_unevictable_pages() on THP
mm: migration of hugetlbfs page skip memcg
ksm: reinstate memcg charge on copied pages
mailmap: add older email addresses for Kees Cook
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of stack_erasing_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/stackleak.c:31:50: warning: incorrect type in argument 3 (different address spaces)
kernel/stackleak.c:31:50: expected void *
kernel/stackleak.c:31:50: got void [noderef] __user *buffer
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093253.13656-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If a kprobe is marked as gone, we should not kill it again. Otherwise, we
can disarm the kprobe more than once. In that case, the statistics of
kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not
work.
Fixes: e8386a0cb22f ("kprobes: support probing module __exit function")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix order in trace_hardirqs_off_caller() to make locking state
consistent even if the IRQ tracer calls into lockdep again. Touches
common code. Acked-by Peter Zijlstra.
- Correctly handle secure storage violation exception to avoid kernel
panic triggered by user space misbehaviour.
- Switch the idle->seqcount over to using raw_write_*() to avoid
"suspicious RCU usage".
- Fix memory leaks on hard unplug in pci code.
- Use kvmalloc instead of kmalloc for larger allocations in zcrypt.
- Add few missing __init annotations to static functions to avoid
section mismatch complains when functions are not inlined.
* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add 3f program exception handler
lockdep: fix order in trace_hardirqs_off_caller()
s390/pci: fix leak of DMA tables on hard unplug
s390/init: add missing __init annotations
s390/zcrypt: fix kmalloc 256k failure
s390/idle: fix suspicious RCU usage
|
|
The local_storage->list will be traversed by rcu reader in parallel.
Thus, hlist_add_head_rcu() is needed in bpf_selem_link_storage_nolock().
This patch fixes it.
This part of the code has recently been refactored in bpf-next
and this patch makes changes to the new file "bpf_local_storage.c".
Instead of using the original offending commit in the Fixes tag,
the commit that created the file "bpf_local_storage.c" is used.
A separate fix has been provided to the bpf tree.
Fixes: 450af8d0f6be ("bpf: Split bpf_local_storage to bpf_sk_storage")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200916204453.2003915-1-kafai@fb.com
|
|
Since kprobe_event= cmdline option allows user to put kprobes on the
functions in initmem, kprobe has to make such probes gone after boot.
Currently the probes on the init functions in modules will be handled
by module callback, but the kernel init text isn't handled.
Without this, kprobes may access non-exist text area to disable or
remove it.
Link: https://lkml.kernel.org/r/159972810544.428528.1839307531600646955.stgit@devnote2
Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter")
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
clang static analyzer reports this problem
trace_events_hist.c:3824:3: warning: Attempt to free
released memory
kfree(hist_data->attrs->var_defs.name[i]);
In parse_var_defs() if there is a problem allocating
var_defs.expr, the earlier var_defs.name is freed.
This free is duplicated by free_var_defs() which frees
the rest of the list.
Because free_var_defs() has to run anyway, remove the
second free fom parse_var_defs().
Link: https://lkml.kernel.org/r/20200907135845.15804-1-trix@redhat.com
Cc: stable@vger.kernel.org
Fixes: 30350d65ac56 ("tracing: Add variable support to hist triggers")
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
changed ctl_table.proc_handler to take a kernel pointer. Adjust the
signature of ftrace_enable_sysctl to match ctl_table.proc_handler which
fixes the following sparse warning:
kernel/trace/ftrace.c:7544:43: warning: incorrect type in argument 3 (different address spaces)
kernel/trace/ftrace.c:7544:43: expected void *
kernel/trace/ftrace.c:7544:43: got void [noderef] __user *buffer
Link: https://lkml.kernel.org/r/20200907093207.13540-1-tklauser@distanz.ch
Fixes: 32927393dc1c ("sysctl: pass kernel pointers to ->proc_handler")
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
For 64bit CONFIG_BASE_SMALL=0 systems PID_MAX_LIMIT is set by default to
4194304. During boot the kernel sets a new value based on number of CPUs
but no lower than 32768. It is 1024 per CPU so with 128 CPUs the default
becomes 131072 which needs six digits.
This value can be increased during run time but must not exceed the
initial upper limit.
Systemd sometime after v241 sets it to the upper limit during boot. The
result is that when the pid exceeds five digits, the trace output is a
little hard to read because it is no longer properly padded (same like
on big iron with 98+ CPUs).
Increase the pid padding to seven digits.
Link: https://lkml.kernel.org/r/20200904082331.dcdkrr3bkn3e4qlg@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Add synchronize_rcu() after list_del_rcu() in
ftrace_remove_trampoline_from_kallsyms() to protect readers of
ftrace_ops_trampoline_list (in ftrace_get_trampoline_kallsym)
which is used when kallsyms is read.
Link: https://lkml.kernel.org/r/20200901091617.31837-1-adrian.hunter@intel.com
Fixes: fc0ea795f53c8d ("ftrace: Add symbols for ftrace trampolines")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit fc0ea795f53c ("ftrace: Add symbols for ftrace trampolines")
missed to remove ops from new ftrace_ops_trampoline_list in
ftrace_startup() if ftrace_hash_ipmodify_enable() fails there. It may
lead to BUG if such ops come from a module which may be removed.
Moreover, the trampoline itself is not freed in this case.
Fix it by calling ftrace_trampoline_free() during the rollback.
Link: https://lkml.kernel.org/r/20200831122631.28057-1-mbenes@suse.cz
Fixes: fc0ea795f53c ("ftrace: Add symbols for ftrace trampolines")
Fixes: f8b8be8a310a ("ftrace, kprobes: Support IPMODIFY flag to find IP modify conflict")
Signed-off-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at
kprobe_ftrace_handler") fixed one bug but not completely fixed yet.
If we run a kprobe_module.tc of ftracetest, kernel showed a warning
as below.
# ./ftracetest test.d/kprobe/kprobe_module.tc
=== Ftrace unit tests ===
[1] Kprobe dynamic event - probing module
...
[ 22.400215] ------------[ cut here ]------------
[ 22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2)
[ 22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0
[ 22.403358] Modules linked in: trace_printk(-)
[ 22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ #66
[ 22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[ 22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0
[ 22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7
[ 22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286
[ 22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000
[ 22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3
[ 22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001
[ 22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640
[ 22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000
[ 22.415941] FS: 00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000
[ 22.417264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0
[ 22.419309] Call Trace:
[ 22.419990] kill_kprobe+0x94/0x160
[ 22.420652] kprobes_module_callback+0x64/0x230
[ 22.421470] notifier_call_chain+0x4f/0x70
[ 22.422184] blocking_notifier_call_chain+0x49/0x70
[ 22.422979] __x64_sys_delete_module+0x1ac/0x240
[ 22.423733] do_syscall_64+0x38/0x50
[ 22.424366] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 22.425176] RIP: 0033:0x4bb81d
[ 22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48
[ 22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0
[ 22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d
[ 22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028
[ 22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320
[ 22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028
[ 22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000
[ 22.435682] irq event stamp: 1169
[ 22.436240] hardirqs last enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580
[ 22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580
[ 22.438608] softirqs last enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490
[ 22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20
[ 22.440690] ---[ end trace 1e7ce7e1e4567276 ]---
[ 22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue.
This is because the kill_kprobe() calls disarm_kprobe_ftrace() even
if the given probe is not enabled. In that case, ftrace_set_filter_ip()
fails because the given probe point is not registered to ftrace.
Fix to check the given (going) probe is enabled before invoking
disarm_kprobe_ftrace().
Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2
Fixes: 0cb2f1372baa ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler")
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David Miller <davem@davemloft.net>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Chengming Zhou <zhouchengming@bytedance.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
LD_[ABS|IND] instructions may return from the function early. bpf_tail_call
pseudo instruction is either fallthrough or return. Allow them in the
subprograms only when subprograms are BTF annotated and have scalar return
types. Allow ld_abs and tail_call in the main program even if it calls into
subprograms. In the past that was not ok to do for ld_abs, since it was JITed
with special exit sequence. Since bpf_gen_ld_abs() was introduced the ld_abs
looks like normal exit insn from JIT point of view, so it's safe to allow them
in the main program.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Relax verifier's restriction that was meant to forbid tailcall usage
when subprog count was higher than 1.
Also, do not max out the stack depth of program that utilizes tailcalls.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit serves two things:
1) it optimizes BPF prologue/epilogue generation
2) it makes possible to have tailcalls within BPF subprogram
Both points are related to each other since without 1), 2) could not be
achieved.
In [1], Alexei says:
"The prologue will look like:
nop5
xor eax,eax // two new bytes if bpf_tail_call() is used in this
// function
push rbp
mov rbp, rsp
sub rsp, rounded_stack_depth
push rax // zero init tail_call counter
variable number of push rbx,r13,r14,r15
Then bpf_tail_call will pop variable number rbx,..
and final 'pop rax'
Then 'add rsp, size_of_current_stack_frame'
jmp to next function and skip over 'nop5; xor eax,eax; push rpb; mov
rbp, rsp'
This way new function will set its own stack size and will init tail
call
counter with whatever value the parent had.
If next function doesn't use bpf_tail_call it won't have 'xor eax,eax'.
Instead it would need to have 'nop2' in there."
Implement that suggestion.
Since the layout of stack is changed, tail call counter handling can not
rely anymore on popping it to rbx just like it have been handled for
constant prologue case and later overwrite of rbx with actual value of
rbx pushed to stack. Therefore, let's use one of the register (%rcx) that
is considered to be volatile/caller-saved and pop the value of tail call
counter in there in the epilogue.
Drop the BUILD_BUG_ON in emit_prologue and in
emit_bpf_tail_call_indirect where instruction layout is not constant
anymore.
Introduce new poke target, 'tailcall_bypass' to poke descriptor that is
dedicated for skipping the register pops and stack unwind that are
generated right before the actual jump to target program.
For case when the target program is not present, BPF program will skip
the pop instructions and nop5 dedicated for jmpq $target. An example of
such state when only R6 of callee saved registers is used by program:
ffffffffc0513aa1: e9 0e 00 00 00 jmpq 0xffffffffc0513ab4
ffffffffc0513aa6: 5b pop %rbx
ffffffffc0513aa7: 58 pop %rax
ffffffffc0513aa8: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc0513aaf: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0513ab4: 48 89 df mov %rbx,%rdi
When target program is inserted, the jump that was there to skip
pops/nop5 will become the nop5, so CPU will go over pops and do the
actual tailcall.
One might ask why there simply can not be pushes after the nop5?
In the following example snippet:
ffffffffc037030c: 48 89 fb mov %rdi,%rbx
(...)
ffffffffc0370332: 5b pop %rbx
ffffffffc0370333: 58 pop %rax
ffffffffc0370334: 48 81 c4 00 00 00 00 add $0x0,%rsp
ffffffffc037033b: 0f 1f 44 00 00 nopl 0x0(%rax,%rax,1)
ffffffffc0370340: 48 81 ec 00 00 00 00 sub $0x0,%rsp
ffffffffc0370347: 50 push %rax
ffffffffc0370348: 53 push %rbx
ffffffffc0370349: 48 89 df mov %rbx,%rdi
ffffffffc037034c: e8 f7 21 00 00 callq 0xffffffffc0372548
There is the bpf2bpf call (at ffffffffc037034c) right after the tailcall
and jump target is not present. ctx is in %rbx register and BPF
subprogram that we will call into on ffffffffc037034c is relying on it,
e.g. it will pick ctx from there. Such code layout is therefore broken
as we would overwrite the content of %rbx with the value that was pushed
on the prologue. That is the reason for the 'bypass' approach.
Special care needs to be taken during the install/update/remove of
tailcall target. In case when target program is not present, the CPU
must not execute the pop instructions that precede the tailcall.
To address that, the following states can be defined:
A nop, unwind, nop
B nop, unwind, tail
C skip, unwind, nop
D skip, unwind, tail
A is forbidden (lead to incorrectness). The state transitions between
tailcall install/update/remove will work as follows:
First install tail call f: C->D->B(f)
* poke the tailcall, after that get rid of the skip
Update tail call f to f': B(f)->B(f')
* poke the tailcall (poke->tailcall_target) and do NOT touch the
poke->tailcall_bypass
Remove tail call: B(f')->C(f')
* poke->tailcall_bypass is poked back to jump, then we wait the RCU
grace period so that other programs will finish its execution and
after that we are safe to remove the poke->tailcall_target
Install new tail call (f''): C(f')->D(f'')->B(f'').
* same as first step
This way CPU can never be exposed to "unwind, tail" state.
Last but not least, when tailcalls get mixed with bpf2bpf calls, it
would be possible to encounter the endless loop due to clearing the
tailcall counter if for example we would use the tailcall3-like from BPF
selftests program that would be subprogram-based, meaning the tailcall
would be present within the BPF subprogram.
This test, broken down to particular steps, would do:
entry -> set tailcall counter to 0, bump it by 1, tailcall to func0
func0 -> call subprog_tail
(we are NOT skipping the first 11 bytes of prologue and this subprogram
has a tailcall, therefore we clear the counter...)
subprog -> do the same thing as entry
and then loop forever.
To address this, the idea is to go through the call chain of bpf2bpf progs
and look for a tailcall presence throughout whole chain. If we saw a single
tail call then each node in this call chain needs to be marked as a subprog
that can reach the tailcall. We would later feed the JIT with this info
and:
- set eax to 0 only when tailcall is reachable and this is the entry prog
- if tailcall is reachable but there's no tailcall in insns of currently
JITed prog then push rax anyway, so that it will be possible to
propagate further down the call chain
- finally if tailcall is reachable, then we need to precede the 'call'
insn with mov rax, [rbp - (stack_depth + 8)]
Tail call related cases from test_verifier kselftest are also working
fine. Sample BPF programs that utilize tail calls (sockex3, tracex5)
work properly as well.
[1]: https://lore.kernel.org/bpf/20200517043227.2gpq22ifoq37ogst@ast-mbp.dhcp.thefacebook.com/
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Protect against potential stack overflow that might happen when bpf2bpf
calls get combined with tailcalls. Limit the caller's stack depth for
such case down to 256 so that the worst case scenario would result in 8k
stack size (32 which is tailcall limit * 256 = 8k).
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Reflect the actual purpose of poke->ip and rename it to
poke->tailcall_target so that it will not the be confused with another
poke target that will be introduced in next commit.
While at it, do the same thing with poke->ip_stable - rename it to
poke->tailcall_target_stable.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Previously, there was no need for poke descriptors being present in
subprogram's bpf_prog_aux struct since tailcalls were simply not allowed
in them. Each subprog is JITed independently so in order to enable
JITing subprograms that use tailcalls, do the following:
- in fixup_bpf_calls() store the index of tailcall insn onto the generated
poke descriptor,
- in case when insn patching occurs, adjust the tailcall insn idx from
bpf_patch_insn_data,
- then in jit_subprogs() check whether the given poke descriptor belongs
to the current subprog by checking if that previously stored absolute
index of tail call insn is in the scope of the insns of given subprog,
- update the insn->imm with new poke descriptor slot so that while JITing
the proper poke descriptor will be grabbed
This way each of the main program's poke descriptors are distributed
across the subprograms poke descriptor array, so main program's
descriptors can be untracked out of the prog array map.
Add also subprog's aux struct to the BPF map poke_progs list by calling
on it map_poke_track().
In case of any error, call the map_poke_untrack() on subprog's aux
structs that have already been registered to prog array map.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") made
the page locking entirely fair, in that if a waiter came in while the
lock was held, the lock would be transferred to the lockers strictly in
order.
That was intended to finally get rid of the long-reported watchdog
failures that involved the page lock under extreme load, where a process
could end up waiting essentially forever, as other page lockers stole
the lock from under it.
It also improved some benchmarks, but it ended up causing huge
performance regressions on others, simply because fair lock behavior
doesn't end up giving out the lock as aggressively, causing better
worst-case latency, but potentially much worse average latencies and
throughput.
Instead of reverting that change entirely, this introduces a controlled
amount of unfairness, with a sysctl knob to tune it if somebody needs
to. But the default value should hopefully be good for any normal load,
allowing a few rounds of lock stealing, but enforcing the strict
ordering before the lock has been stolen too many times.
There is also a hint from Matthieu Baerts that the fair page coloring
may end up exposing an ABBA deadlock that is hidden by the usual
optimistic lock stealing, and while the unfairness doesn't fix the
fundamental issue (and I'm still looking at that), it avoids it in
practice.
The amount of unfairness can be modified by writing a new value to the
'sysctl_page_lock_unfairness' variable (default value of 5, exposed
through /proc/sys/vm/page_lock_unfairness), but that is hopefully
something we'd use mainly for debugging rather than being necessary for
any deep system tuning.
This whole issue has exposed just how critical the page lock can be, and
how contended it gets under certain locks. And the main contention
doesn't really seem to be anything related to IO (which was the origin
of this lock), but for things like just verifying that the page file
mapping is stable while faulting in the page into a page table.
Link: https://lore.kernel.org/linux-fsdevel/ed8442fd-6f54-dd84-cd4a-941e8b7ee603@MichaelLarabel.com/
Link: https://www.phoronix.com/scan.php?page=article&item=linux-50-59&num=1
Link: https://lore.kernel.org/linux-fsdevel/c560a38d-8313-51fb-b1ec-e904bd8836bc@tessares.net/
Reported-and-tested-by: Michael Larabel <Michael@michaellarabel.com>
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 8344496e8b49 ("rcu-tasks: Conditionally compile
show_rcu_tasks_gp_kthreads()") introduced conditional
compilation of several functions, but forgot one occurrence of
show_rcu_tasks_classic_gp_kthread() that causes the compiler to warn of
an unused static function. This commit uses "static inline" to avoid
these complaints and possibly also to avoid emitting an actual definition
of this function.
Fixes: 8344496e8b49 ("rcu-tasks: Conditionally compile show_rcu_tasks_gp_kthreads()")
Cc: <stable@vger.kernel.org> # 5.8.x
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The __this_cpu*() accessors are (in general) IRQ-unsafe which, given
that percpu-rwsem is a blocking primitive, should be just fine.
However, file_end_write() is used from IRQ context and will cause
load-store issues on architectures where the per-cpu accessors are not
natively irq-safe.
Fix it by using the IRQ-safe this_cpu_*() for operations on
read_count. This will generate more expensive code on a number of
platforms, which might cause a performance regression for some of the
other percpu-rwsem users.
If any such is reported, we can consider alternative solutions.
Fixes: 70fe2f48152e ("aio: fix freeze protection of aio writes")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20200915140750.137881-1-houtao1@huawei.com
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-09-15
The following pull-request contains BPF updates for your *net* tree.
We've added 12 non-merge commits during the last 19 day(s) which contain
a total of 10 files changed, 47 insertions(+), 38 deletions(-).
The main changes are:
1) docs/bpf fixes, from Andrii.
2) ld_abs fix, from Daniel.
3) socket casting helpers fix, from Martin.
4) hash iterator fixes, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This syscall binds a map to a program. Returns success if the map is
already bound to the program.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Link: https://lore.kernel.org/bpf/20200915234543.3220146-3-sdf@google.com
|
|
To support modifying the used_maps array, we use a mutex to protect
the use of the counter and the array. The mutex is initialized right
after the prog aux is allocated, and destroyed right before prog
aux is freed. This way we guarantee it's initialized for both cBPF
and eBPF.
Signed-off-by: YiFei Zhu <zhuyifei@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Cc: YiFei Zhu <zhuyifei1999@gmail.com>
Link: https://lore.kernel.org/bpf/20200915234543.3220146-2-sdf@google.com
|
|
Running selftest
./btf_btf -p
the kernel had the following warning:
[ 51.528185] WARNING: CPU: 3 PID: 1756 at kernel/bpf/hashtab.c:717 htab_map_get_next_key+0x2eb/0x300
[ 51.529217] Modules linked in:
[ 51.529583] CPU: 3 PID: 1756 Comm: test_btf Not tainted 5.9.0-rc1+ #878
[ 51.530346] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.el7.centos 04/01/2014
[ 51.531410] RIP: 0010:htab_map_get_next_key+0x2eb/0x300
...
[ 51.542826] Call Trace:
[ 51.543119] map_seq_next+0x53/0x80
[ 51.543528] seq_read+0x263/0x400
[ 51.543932] vfs_read+0xad/0x1c0
[ 51.544311] ksys_read+0x5f/0xe0
[ 51.544689] do_syscall_64+0x33/0x40
[ 51.545116] entry_SYSCALL_64_after_hwframe+0x44/0xa9
The related source code in kernel/bpf/hashtab.c:
709 static int htab_map_get_next_key(struct bpf_map *map, void *key, void *next_key)
710 {
711 struct bpf_htab *htab = container_of(map, struct bpf_htab, map);
712 struct hlist_nulls_head *head;
713 struct htab_elem *l, *next_l;
714 u32 hash, key_size;
715 int i = 0;
716
717 WARN_ON_ONCE(!rcu_read_lock_held());
In kernel/bpf/inode.c, bpffs map pretty print calls map->ops->map_get_next_key()
without holding a rcu_read_lock(), hence causing the above warning.
To fix the issue, just surrounding map->ops->map_get_next_key() with |