summaryrefslogtreecommitdiffstats
path: root/kernel/module.c
AgeCommit message (Collapse)Author
2009-04-11async: Fix module loading async-work regressionLinus Torvalds
Several drivers use asynchronous work to do device discovery, and we synchronize with them in the compiled-in case before we actually try to mount root filesystems etc. However, when compiled as modules, that synchronization is missing - the module loading completes, but the driver hasn't actually finished probing for devices, and that means that any user mode that expects to use the devices after the 'insmod' is now potentially broken. We already saw one case of a similar issue in the ACPI battery code, where the kernel itself expected the module to be all done, and unmapped the init memory - but the async device discovery was still running. That got hacked around by just removing the "__init" (see commit 5d38258ec026921a7b266f4047ebeaa75db358e5 "ACPI battery: fix async boot oops"), but the real fix is to just make the module loading wait for all async work to be completed. It will slow down module loading, but since common devices should be built in anyway, and since the bug is really annoying and hard to handle from user space (and caused several S3 resume regressions), the simple fix to wait is the right one. This fixes at least http://bugzilla.kernel.org/show_bug.cgi?id=13063 but probably a few other bugzilla entries too (12936, for example), and is confirmed to fix Rafael's storage driver breakage after resume bug report (no bugzilla entry). We should also be able to now revert that ACPI battery fix. Reported-and-tested-by: Rafael J. Wysocki <rjw@suse.com> Tested-by: Heinz Diehl <htd@fancy-poultry.org> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07Revert "module: remove the SHF_ALLOC flag on the __versions section."Rusty Russell
This reverts commit 9cb610d8e35fe3ec95a2fe2030b02f85aeea83c1. This was an impressively stupid patch. Firstly, we reset the SHF_ALLOC flag lower down in the same function, so the patch was useless. Even better, find_sec() ignores sections with SHF_ALLOC not set, so it breaks CONFIG_MODVERSIONS=y with CONFIG_MODULE_FORCE_LOAD=n, which refuses to load the module since it can't find the __versions section. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-04-05Merge branch 'tracing-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (413 commits) tracing, net: fix net tree and tracing tree merge interaction tracing, powerpc: fix powerpc tree and tracing tree interaction ring-buffer: do not remove reader page from list on ring buffer free function-graph: allow unregistering twice trace: make argument 'mem' of trace_seq_putmem() const tracing: add missing 'extern' keywords to trace_output.h tracing: provide trace_seq_reserve() blktrace: print out BLK_TN_MESSAGE properly blktrace: extract duplidate code blktrace: fix memory leak when freeing struct blk_io_trace blktrace: fix blk_probes_ref chaos blktrace: make classic output more classic blktrace: fix off-by-one bug blktrace: fix the original blktrace blktrace: fix a race when creating blk_tree_root in debugfs blktrace: fix timestamp in binary output tracing, Text Edit Lock: cleanup tracing: filter fix for TRACE_EVENT_FORMAT events ftrace: Using FTRACE_WARN_ON() to check "freed record" in ftrace_release() x86: kretprobe-booster interrupt emulation code fix ... Fix up trivial conflicts in arch/parisc/include/asm/ftrace.h include/linux/memory.h kernel/extable.c kernel/module.c
2009-04-02Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar
Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
2009-03-31module: use strstarts()Rusty Russell
Impact: minor cleanup. I'm not going to neaten anyone else's code, but I'm happy to clean up my own. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: don't use stop_machine on module loadRusty Russell
Kay Sievers <kay.sievers@vrfy.org> discovered that boot times are slowed by about half a second because all the stop_machine_create() calls, and he only probes about 40 modules (I have 125 loaded on this laptop). We only do stop_machine_create() so we can unlink the module if something goes wrong, but it's overkill (and buggy anyway: if stop_machine_create() fails we still call stop_machine_destroy()). Since we are only protecting against kallsyms (esp. oops) walking the list, synchronize_sched() is sufficient (synchronize_rcu() is probably sufficient, but we're not in a hurry). Kay says of this patch: ... no module takes more than 40 millisecs to link now, most of them are between 3 and 8 millisecs. That looks very different to the numbers without this patch and the otherwise same setup, where we get heavy noise in the traces and many delays of up to 200 millisecs until linking, most of them taking 30+ millisecs. Tested-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: include other structures in module version checkRusty Russell
With CONFIG_MODVERSIONS, we version 'struct module' using a dummy export, but other things matter too: 1) 'struct modversion_info' determines the layout of the __versions section, 2) 'struct kernel_param' determines the layout of the __params section, 3) 'struct kernel_symbol' determines __ksymtab*. 4) 'struct marker' determines __markers. 5) 'struct tracepoint' determines __tracepoints. So we rename 'struct_module' to 'module_layout' and include these in the signature. Now it's general we can add others later on without confusion. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: remove the SHF_ALLOC flag on the __versions section.Rusty Russell
Impact: reduce kernel memory usage This patch just takes off the SHF_ALLOC flag on __versions so we don't keep them around after module load. This saves about 7% of module memory if CONFIG_MODVERSIONS=y. Cc: Shawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: clarify the force-loading taint message.Rusty Russell
Impact: Message cleanup Two of three callers of try_to_force_load() are not because of a missing version, so change the messages: Old: <modname>: no version for "magic" found: kernel tainted. New: <modname>: bad vermagic: kernel tainted. Old: <modname>: no version for "nocrc" found: kernel tainted. New: <modname>: no versions for exported symbols: kernel tainted. Old: <modname>: no version for "<symname>" found: kernel tainted. New: <modname>: <symname>: kernel tainted. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: Export symbols needed for KspliceTim Abbott
Impact: Expose some module.c symbols Ksplice uses several functions from module.c in order to resolve symbols and implement dependency handling. Calling these functions requires holding module_mutex, so it is exported. (This is just the module part of a bigger add-exports patch from Tim). Cc: Anders Kaseorg <andersk@mit.edu> Cc: Jeff Arnold <jbarnold@mit.edu> Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31Ksplice: Add functions for walking kallsyms symbolsAnders Kaseorg
Impact: New API kallsyms_lookup_name only returns the first match that it finds. Ksplice needs information about all symbols with a given name in order to correctly resolve local symbols. kallsyms_on_each_symbol provides a generic mechanism for iterating over the kallsyms table. Cc: Jeff Arnold <jbarnold@mit.edu> Cc: Tim Abbott <tabbott@mit.edu> Signed-off-by: Anders Kaseorg <andersk@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: remove module_text_address()Rusty Russell
Impact: Replace and remove risky (non-EXPORTed) API module_text_address() returns a pointer to the module, which given locking improvements in module.c, is useless except to test for NULL: 1) If the module can't go away, use __module_text_address. 2) Otherwise, just use is_module_text_address(). Cc: linux-mtd@lists.infradead.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: __module_addressRusty Russell
Impact: New API, cleanup ksplice wants to know the bounds of a module, not just the module text. It makes sense to have __module_address. We then implement is_module_address and __module_text_address in terms of this (and change is_module_text_address() to bool while we're at it). Also, add proper kerneldoc for them all. Cc: Anders Kaseorg <andersk@mit.edu> Cc: Jeff Arnold <jbarnold@mit.edu> Cc: Tim Abbott <tabbott@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31module: Make find_symbol return a struct kernel_symbolTim Abbott
Impact: Cleanup, internal API change Ksplice needs access to the kernel_symbol structure in order to support modifications to the exported symbol table. Cc: Anders Kaseorg <andersk@mit.edu> Cc: Jeff Arnold <jbarnold@mit.edu> Signed-off-by: Tim Abbott <tabbott@mit.edu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (bugfix and style)
2009-03-31kernel/module.c: fix an unused goto labelAmérico Wang
Impact: cleanup Label 'free_init' is only used when defined(CONFIG_MODULE_UNLOAD) && defined(CONFIG_SMP), so move it inside to shut up gcc. Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-31param: fix charp parameters set via sysfsRusty Russell
Impact: fix crash on reading from /sys/module/.../ieee80211_default_rc_algo The module_param type "charp" simply sets a char * pointer in the module to the parameter in the commandline string: this is why we keep the (mangled) module command line around. But when set via sysfs (as about 11 charp parameters can be) this memory is freed on the way out of the write(). Future reads hit random mem. So we kstrdup instead: we have to check we're not in early commandline parsing, and we have to note when we've used it so we can reliably kfree the parameter when it's next overwritten, and also on module unload. (Thanks to Randy Dunlap for CONFIG_SYSFS=n fixes) Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Diagnosed-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Frederic Weisbecker <fweisbec@gmail.com> Tested-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24dynamic debug: combine dprintk and dynamic printkJason Baron
This patch combines Greg Bank's dprintk() work with the existing dynamic printk patchset, we are now calling it 'dynamic debug'. The new feature of this patchset is a richer /debugfs control file interface, (an example output from my system is at the bottom), which allows fined grained control over the the debug output. The output can be controlled by function, file, module, format string, and line number. for example, enabled all debug messages in module 'nf_conntrack': echo -n 'module nf_conntrack +p' > /mnt/debugfs/dynamic_debug/control to disable them: echo -n 'module nf_conntrack -p' > /mnt/debugfs/dynamic_debug/control A further explanation can be found in the documentation patch. Signed-off-by: Greg Banks <gnb@sgi.com> Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-20Merge branches 'tracing/ftrace', 'tracing/kprobes', 'tracing/tasks' and ↵Ingo Molnar
'linus' into tracing/core
2009-03-18module: fix refptr allocation and release orderMasami Hiramatsu
Impact: fix ref-after-free crash on failed module load Fix refptr bug: Change refptr allocation and release order not to access a module data structure pointed by 'mod' after freeing mod->module_core. This bug will cause kernel panic(e.g. failed to find undefined symbols). This bug was reported on systemtap bugzilla. http://sources.redhat.com/bugzilla/show_bug.cgi?id=9927 Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-10Merge branch 'x86/core' into tracing/ftraceIngo Molnar
Semantic merge: kernel/trace/trace_functions_graph.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06Merge branch 'x86/core' into tracing/texteditIngo Molnar
Conflicts: arch/x86/Kconfig block/blktrace.c kernel/irq/handle.c Semantic conflict: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06percpu, module: implement reserved allocation and use it for module percpu ↵Tejun Heo
variables Impact: add reserved allocation functionality and use it for module percpu variables This patch implements reserved allocation from the first chunk. When setting up the first chunk, arch can ask to set aside certain number of bytes right after the core static area which is available only through a separate reserved allocator. This will be used primarily for module static percpu variables on architectures with limited relocation range to ensure that the module perpcu symbols are inside the relocatable range. If reserved area is requested, the first chunk becomes reserved and isn't available for regular allocation. If the first chunk also includes piggy-back dynamic allocation area, a separate chunk mapping the same region is created to serve dynamic allocation. The first one is called static first chunk and the second dynamic first chunk. Although they share the page map, their different area map initializations guarantee they serve disjoint areas according to their purposes. If arch doesn't setup reserved area, reserved allocation is handled like any other allocation. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-20percpu: implement new dynamic percpu allocatorTejun Heo
Impact: new scalable dynamic percpu allocator which allows dynamic percpu areas to be accessed the same way as static ones Implement scalable dynamic percpu allocator which can be used for both static and dynamic percpu areas. This will allow static and dynamic areas to share faster direct access methods. This feature is optional and enabled only when CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is defined by arch. Please read comment on top of mm/percpu.c for details. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org>
2009-02-20module: reorder module pcpu related functionsTejun Heo
Impact: cleanup Move percpu_modinit() upwards. This is to ease further changes. Signed-off-by: Tejun Heo <tj@kernel.org>
2009-02-09tracing/function-graph-tracer: drop the kernel_text_address checkFrederic Weisbecker
When the function graph tracer picks a return address, it ensures this address is really a kernel text one by calling __kernel_text_address() Actually this path has never been taken.Its role was more likely to debug the tracer on the beginning of its development but this function is wasteful since it is called for every traced function. The fault check is already sufficient. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-02modules: Use a better scheme for refcountingEric Dumazet
Current refcounting for modules (done if CONFIG_MODULE_UNLOAD=y) is using a lot of memory. Each 'struct module' contains an [NR_CPUS] array of full cache lines. This patch uses existing infrastructure (percpu_modalloc() & percpu_modfree()) to allocate percpu space for the refcount storage. Instead of wasting NR_CPUS*128 bytes (on i386), we now use nr_cpu_ids*sizeof(local_t) bytes. On a typical distro, where NR_CPUS=8, shiping 2000 modules, we reduce size of module files by about 2 Mbytes. (1Kb per module) Instead of having all refcounters in the same memory node - with TLB misses because of vmalloc() - this new implementation permits to have better NUMA properties, since each CPU will use storage on its preferred node, thanks to percpu storage. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-14[CVE-2009-0029] System call wrappers part 08Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2009-01-07async: Asynchronous function calls to speed up kernel bootArjan van de Ven
Right now, most of the kernel boot is strictly synchronous, such that various hardware delays are done sequentially. In order to make the kernel boot faster, this patch introduces infrastructure to allow doing some of the initialization steps asynchronously, which will hide significant portions of the hardware delays in practice. In order to not change device order and other similar observables, this patch does NOT do full parallel initialization. Rather, it operates more in the way an out of order CPU does; the work may be done out of order and asynchronous, but the observable effects (instruction retiring for the CPU) are still done in the original sequence. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-06module: add MODULE_STATE_LIVE notifyMasami Hiramatsu
Add a module notifier call which notifies that the state of a module changes from MODULE_STATE_COMING to MODULE_STATE_LIVE. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06module: add within_module_core() and within_module_init()Masami Hiramatsu
This series of patches allows kprobes to probe module's __init and __exit functions. This means, you can probe driver initialization and terminating. Currently, kprobes can't probe __init function because these functions are freed after module initialization. And it also can't probe module __exit functions because kprobe increments reference count of target module and user can't unload it. this means __exit functions never be called unless removing probes from the module. To solve both cases, this series of patches introduces GONE flag and sets it when the target code is freed(for this purpose, kprobes hooks MODULE_STATE_* events). This also removes refcount incrementing for allowing user to unload target module. Users can check which probes are GONE by debugfs interface. For taking timing of freeing module's .init text, these also include a patch which adds module's notifier of MODULE_STATE_LIVE event. This patch: Add within_module_core() and within_module_init() for checking whether an address is in the module .init.text section or .text section, and replace within() local inline functions in kernel/module.c with them. kprobes uses these functions to check where the kprobe is inserted. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06Remove remaining unwinder codeAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Gabor Gombas <gombasg@sztaki.hu> Cc: Jan Beulich <jbeulich@novell.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@elte.hu>, Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-05module: convert to stop_machine_create/destroy.Heiko Carstens
The module code relies on a non-failing stop_machine call. So we create the kstop threads in advance and with that make sure the call won't fail. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-01-05module: fix module loading failure of large kernel modules for pariscHelge Deller
When creating the final layout of a kernel module in memory, allow the module loader to reserve some additional memory in front of a given section. This is currently only needed for the parisc port which needs to put the stub entries there to fulfill the 17/22bit PCREL relocations with large kernel modules like xfs. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (renamed fn)
2009-01-05module: fix warning of unused function when !CONFIG_PROC_FSJianjun Kong
Fix this warning: kernel/module.c:824: warning: ‘print_unload_info’ defined but not used print_unload_info() just was used when CONFIG_PROC_FS was defined. This patch mark print_unload_info() inline to solve the problem. Signed-off-by: Jianjun Kong <jianjun@zeuux.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> CC: Ingo Molnar <mingo@elte.hu> CC: Américo Wang <xiyou.wangcong@gmail.com>
2009-01-05kernel/module.c: compare symbol values when marking symbols as exported in ↵Tim Abbott
/proc/kallsyms. When there are two symbols in a module with the same name, one of which is exported, both will be marked as exported in /proc/kallsyms. There aren't any instances of this in the current kernel, but it is easy to construct a simple module with two compilation units that exhibits the problem. $ objdump -j .text -t testmod.ko | grep foo 00000000 l F .text 00000032 foo 00000080 g F .text 00000001 foo $ sudo insmod testmod.ko $ grep "T foo" /proc/kallsyms c28e8000 T foo [testmod] c28e8080 T foo [testmod] Fix this by comparing the symbol values once we've found the exported symbol table entry matching the symbol name. Tested using Ksplice: $ ksplice-create --patch=this_commit.patch --id=bar . $ sudo ksplice-apply ksplice-bar.tar.gz Done! $ grep "T foo" /proc/kallsyms c28e8080 T foo [testmod] Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-08tracing/function-graph-tracer: introduce __notrace_funcgraph to filter ↵Frederic Weisbecker
special functions Impact: trace more functions When the function graph tracer is configured, three more files are not traced to prevent only four functions to be traced. And this impacts the normal function tracer too. arch/x86/kernel/process_64/32.c: I had crashes when I let this file traced. After some debugging, I saw that the "current" task point was changed inside__swtich_to(), ie: "write_pda(pcurrent, next_p);" inside process_64.c Since the tracer store the original return address of the function inside current, we had crashes. Only __switch_to() has to be excluded from tracing. kernel/module.c and kernel/extable.c: Because of a function used internally by the function graph tracer: __kernel_text_address() To let the other functions inside these files to be traced, this patch introduces the __notrace_funcgraph function prefix which is __notrace if function graph tracer is configured and nothing if not. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-17Merge branches 'tracing/branch-tracer', 'tracing/ftrace', ↵Ingo Molnar
'tracing/function-return-tracer', 'tracing/tracepoints' and 'tracing/urgent' into tracing/core
2008-11-16tracepoints: use modules notifiersMathieu Desnoyers
Impact: cleanup Use module notifiers for tracepoint updates rather than adding a hook in module.c. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16markers: use module notifierMathieu Desnoyers
Impact: cleanup Use module notifiers instead of adding a hook in module.c. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-16ftrace: pass module struct to arch dynamic ftrace functionsSteven Rostedt
Impact: allow archs more flexibility on dynamic ftrace implementations Dynamic ftrace has largly been developed on x86. Since x86 does not have the same limitations as other architectures, the ftrace interaction between the generic code and the architecture specific code was not flexible enough to handle some of the issues that other architectures have. Most notably, module trampolines. Due to the limited branch distance that archs make in calling kernel core code from modules, the module load code must create a trampoline to jump to what will make the larger jump into core kernel code. The problem arises when this happens to a call to mcount. Ftrace checks all code before modifying it and makes sure the current code is what it expects. Right now, there is not enough information to handle modifying module trampolines. This patch changes the API between generic dynamic ftrace code and the arch dependent code. There is now two functions for modifying code: ftrace_make_nop(mod, rec, addr) - convert the code at rec->ip into a nop, where the original text is calling addr. (mod is the module struct if called by module init) ftrace_make_caller(rec, addr) - convert the code rec->ip that should be a nop into a caller to addr. The record "rec" now has a new field called "arch" where the architecture can add any special attributes to each call site record. Signed-off-by: Steven Rostedt <srostedt@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-23Merge branch 'proc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc * 'proc' of git://git.kernel.org/pub/scm/linux/kernel/git/adobriyan/proc: (35 commits) proc: remove fs/proc/proc_misc.c proc: move /proc/vmcore creation to fs/proc/vmcore.c proc: move pagecount stuff to fs/proc/page.c proc: move all /proc/kcore stuff to fs/proc/kcore.c proc: move /proc/schedstat boilerplate to kernel/sched_stats.h proc: move /proc/modules boilerplate to kernel/module.c proc: move /proc/diskstats boilerplate to block/genhd.c proc: move /proc/zoneinfo boilerplate to mm/vmstat.c proc: move /proc/vmstat boilerplate to mm/vmstat.c proc: move /proc/pagetypeinfo boilerplate to mm/vmstat.c proc: move /proc/buddyinfo boilerplate to mm/vmstat.c proc: move /proc/vmallocinfo to mm/vmalloc.c proc: move /proc/slabinfo boilerplate to mm/slub.c, mm/slab.c proc: move /proc/slab_allocators boilerplate to mm/slab.c proc: move /proc/interrupts boilerplate code to fs/proc/interrupts.c proc: move /proc/stat to fs/proc/stat.c proc: move rest of /proc/partitions code to block/genhd.c proc: move /proc/cpuinfo code to fs/proc/cpuinfo.c proc: move /proc/devices code to fs/proc/devices.c proc: move rest of /proc/locks to fs/locks.c ...
2008-10-23proc: move /proc/modules boilerplate to kernel/module.cAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
2008-10-22Remove stop_machine during module load v2Andi Kleen
Remove stop_machine during module load v2 module loading currently does a stop_machine on each module load to insert the module into the global module lists. Especially on larger systems this can be quite expensive. It does that to handle concurrent lock lessmodule list readers like kallsyms. I don't think stop_machine() is actually needed to insert something into a list though. There are no concurrent writers because the module mutex is taken. And the RCU list functions know how to insert a node into a list with the right memory ordering so that concurrent readers don't go off into the wood. So remove the stop_machine for the module list insert and just do a list_add_rcu() instead. Module removal will still do a stop_machine of course, it needs that for other reasons. v2: Revised readers based on Paul's comments. All readers that only rely on disabled preemption need to be changed to list_for_each_rcu(). Done that. The others are ok because they have the modules mutex. Also added a possible missing preempt disable for print_modules(). [cc Paul McKenney for review. It's not RCU, but quite similar.] Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-22module: simplify load_module.Rusty Russell
Linus' recent catch of stack overflow in load_module lead me to look at the code. A couple of helpers to get a section address and get objects from a section can help clean things up a little. (And in case you're wondering, the stack size also dropped from 328 to 284 bytes). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-10-20Merge branch 'tracing-v28-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-v28-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (131 commits) tracing/fastboot: improve help text tracing/stacktrace: improve help text tracing/fastboot: fix initcalls disposition in bootgraph.pl tracing/fastboot: fix bootgraph.pl initcall name regexp tracing/fastboot: fix issues and improve output of bootgraph.pl tracepoints: synchronize unregister static inline tracepoints: tracepoint_synchronize_unregister() ftrace: make ftrace_test_p6nop disassembler-friendly markers: fix synchronize marker unregister static inline tracing/fastboot: add better resolution to initcall debug/tracing trace: add build-time check to avoid overrunning hex buffer ftrace: fix hex output mode of ftrace tracing/fastboot: fix initcalls disposition in bootgraph.pl tracing/fastboot: fix printk format typo in boot tracer ftrace: return an error when setting a nonexistent tracer ftrace: make some tracers reentrant ring-buffer: make reentrant ring-buffer: move page indexes into page headers tracing/fastboot: only trace non-module initcalls ftrace: move pc counter in irqtrace ... Manually fix conflicts: - init/main.c: initcall tracing - kernel/module.c: verbose level vs tracepoints - scripts/bootgraph.pl: fallout from cherry-picking commits.
2008-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (25 commits) staging: at76_usb wireless driver Staging: workaround build system bug Staging: Lindent sxg.c Staging: SLICOSS: Call pci_release_regions at driver exit Staging: SLICOSS: Fix remaining type names Staging: SLICOSS: Fix warnings due to static usage Staging: SLICOSS: lots of checkpatch fixes Staging: go7007 v4l fixes Staging: Fix gcc warnings in sxg Staging: add echo cancelation module Staging: add wlan-ng prism2 usb driver Staging: add w35und wifi driver Staging: USB/IP: add host driver Staging: USB/IP: add client driver Staging: USB/IP: add common functions needed Staging: add the go7007 video driver Staging: add me4000 pci data collection driver Staging: add me4000 firmware files Staging: add sxg network driver Staging: add Alacritech slicoss network driver ... Fixed up conflicts due to taint flags changes and MAINTAINERS cleanup in MAINTAINERS, include/linux/kernel.h and kernel/panic.c.
2008-10-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (46 commits) UIO: Fix mapping of logical and virtual memory UIO: add automata sercos3 pci card support UIO: Change driver name of uio_pdrv UIO: Add alignment warnings for uio-mem Driver core: add bus_sort_breadthfirst() function NET: convert the phy_device file to use bus_find_device_by_name kobject: Cleanup kobject_rename and !CONFIG_SYSFS kobject: Fix kobject_rename and !CONFIG_SYSFS sysfs: Make dir and name args to sysfs_notify() const platform: add new device registration helper sysfs: use ilookup5() instead of ilookup5_nowait() PNP: create device attributes via default device attributes Driver core: make bus_find_device_by_name() more robust usb: turn dev_warn+WARN_ON combos into dev_WARN debug: use dev_WARN() rather than WARN_ON() in device_pm_add() debug: Introduce a dev_WARN() function sysfs: fix deadlock device model: Do a quickcheck for driver binding before doing an expensive check Driver core: Fix cleanup in device_create_vargs(). Driver core: Clarify device cleanup. ...
2008-10-16Make the taint flags reliableAndi Kleen
It's somewhat unlikely that it happens, but right now a race window between interrupts or machine checks or oopses could corrupt the tainted bitmap because it is modified in a non atomic fashion. Convert the taint variable to an unsigned long and use only atomic bit operations on it. Unfortunately this means the intvec sysctl functions cannot be used on it anymore. It turned out the taint sysctl handler could actually be simplified a bit (since it only increases capabilities) so this patch actually removes code. [akpm@linux-foundation.org: remove unneeded include] Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16driver core: basic infrastructure for per-module dynamic debug messagesJason Baron
Base infrastructure to enable per-module debug messages. I've introduced CONFIG_DYNAMIC_PRINTK_DEBUG, which when enabled centralizes control of debugging statements on a per-module basis in one /proc file, currently, <debugfs>/dynamic_printk/modules. When, CONFIG_DYNAMIC_PRINTK_DEBUG, is not set, debugging statements can still be enabled as before, often by defining 'DEBUG' for the proper compilation unit. Thus, this patch set has no affect when CONFIG_DYNAMIC_PRINTK_DEBUG is not set. The infrastructure currently ties into all pr_debug() and dev_dbg() calls. That is, if CONFIG_DYNAMIC_PRINTK_DEBUG is set, all pr_debug() and dev_dbg() calls can be dynamically enabled/disabled on a per-module basis. Future plans include extending this functionality to subsystems, that define their own debug levels and flags. Usage: Dynamic debugging is controlled by the debugfs file, <debugfs>/dynamic_printk/modules. This file contains a list of the modules that can be enabled. The format of the file is as follows: <module_name> <enabled=0/1> . . . <module_name> : Name of the module in which the debug call resides <enabled=0/1> : whether the messages are enabled or not For example: snd_hda_intel enabled=0 fixup enabled=1 driver enabled=0 Enable a module: $echo "set enabled=1 <module_name>" > dynamic_printk/modules Disable a module: $echo "set enabled=0 <module_name>" > dynamic_printk/modules Enable all modules: $echo "set enabled=1 all" > dynamic_printk/modules Disable all modules: $echo "set enabled=0 all" > dynamic_printk/modules Finally, passing "dynamic_printk" at the command line enables debugging for all modules. This mode can be turned off via the above disable command. [gkh: minor cleanups and tweaks to make the build work quietly] Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>