summaryrefslogtreecommitdiffstats
path: root/kernel/irq
AgeCommit message (Collapse)Author
2009-05-01Revert "genirq: assert that irq handlers are indeed running in hardirq context"Thomas Gleixner
This reverts commit 044d408409cc4e1bc75c886e27ca85c270db104c. The commit added a warning when handle_IRQ_event() is called outside of hard interrupt context. This breaks the generic tasklet based interrupt resend mechanism which is used when the hardware has no way to retrigger the interrupt. So we get a warning for a use case which is correct and worked for years. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-04-14x86, irq: Remove IRQ_DISABLED check in process context IRQ movePallipadi, Venkatesh
As discussed in the thread here: http://marc.info/?l=linux-kernel&m=123964468521142&w=2 Eric W. Biederman observed: > It looks like some additional bugs have slipped in since last I looked. > > set_irq_affinity does this: > ifdef CONFIG_GENERIC_PENDING_IRQ > if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { > cpumask_copy(desc->affinity, cpumask); > desc->chip->set_affinity(irq, cpumask); > } else { > desc->status |= IRQ_MOVE_PENDING; > cpumask_copy(desc->pending_mask, cpumask); > } > #else > > That IRQ_DISABLED case is a software state and as such it has nothing to > do with how safe it is to move an irq in process context. [...] > > The only reason we migrate MSIs in interrupt context today is that there > wasn't infrastructure for support migration both in interrupt context > and outside of it. Yes. The idea here was to force the MSI migration to happen in process context. One of the patches in the series did disable_irq(dev->irq); irq_set_affinity(dev->irq, cpumask_of(dev->cpu)); enable_irq(dev->irq); with the above patch adding irq/manage code check for interrupt disabled and moving the interrupt in process context. IIRC, there was no IRQ_MOVE_PCNTXT when we were developing this HPET code and we ended up having this ugly hack. IRQ_MOVE_PCNTXT was there when we eventually submitted the patch upstream. But, looks like I did a blind rebasing instead of using IRQ_MOVE_PCNTXT in hpet MSI code. Below patch fixes this. i.e., revert commit 932775a4ab622e3c99bd59f14cc and add PCNTXT to HPET MSI setup. Also removes copying of desc->affinity in generic code as set_affinity routines are doing it internally. Reported-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: "Li Shaohua" <shaohua.li@intel.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: "lcm@us.ibm.com" <lcm@us.ibm.com> Cc: suresh.b.siddha@intel.com LKML-Reference: <20090413222058.GB8211@linux-os.sc.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09Merge branches 'core-fixes-for-linus', 'irq-fixes-for-linus' and ↵Linus Torvalds
'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: printk: fix wrong format string iter for printk futex: comment requeue key reference semantics * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: fix cpumask memory leak on offstack cpumask kernels * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix-timers: fix RLIMIT_CPU && setitimer(CPUCLOCK_PROF) posix-timers: fix RLIMIT_CPU && fork() timers: add missing kernel-doc
2009-04-06Merge branch 'linus' into irq/threadedIngo Molnar
Conflicts: include/linux/irq.h kernel/irq/handle.c
2009-04-03irq: fix cpumask memory leak on offstack cpumask kernelsYinghai Lu
Need to free the old cpumask for affinity and pending_mask. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Rusty Russell <rusty@rustcorp.com.au> LKML-Reference: <49D18FF0.50707@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-02Merge branch 'tracing/core-v2' into tracing-for-linusIngo Molnar
Conflicts: include/linux/slub_def.h lib/Kconfig.debug mm/slob.c mm/slub.c
2009-03-30PM: Introduce functions for suspending and resuming device interruptsRafael J. Wysocki
Introduce helper functions allowing us to prevent device drivers from getting any interrupts (without disabling interrupts on the CPU) during suspend (or hibernation) and to make them start to receive interrupts again during the subsequent resume. These functions make it possible to keep timer interrupts enabled while the "late" suspend and "early" resume callbacks provided by device drivers are being executed. In turn, this allows device drivers' "late" suspend and "early" resume callbacks to sleep, execute ACPI callbacks etc. The functions introduced here will be used to rework the handling of interrupts during suspend (hibernation) and resume. Namely, interrupts will only be disabled on the CPU right before suspending sysdevs, while device drivers will be prevented from receiving interrupts, with the help of the new helper function, before their "late" suspend callbacks run (and analogously during resume). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu>
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-24genirq: threaded irq handlers review fixupsThomas Gleixner
Delta patch to address the review comments. - Implement warning when IRQ_WAKE_THREAD is requested and no thread handler installed - coding style fixes Pointed-out-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24genirq: add support for threaded interrupts to devresArjan van de Ven
Some devices use devres_request_irq() for to install their interrupt handler. Add support for threaded interrupts to devres as well. [tglx - simplified and adapted to latest threadirq version] Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-24genirq: add threaded interrupt handler supportThomas Gleixner
Add support for threaded interrupt handlers: A device driver can request that its main interrupt handler runs in a thread. To achive this the device driver requests the interrupt with request_threaded_irq() and provides additionally to the handler a thread function. The handler function is called in hard interrupt context and needs to check whether the interrupt originated from the device. If the interrupt originated from the device then the handler can either return IRQ_HANDLED or IRQ_WAKE_THREAD. IRQ_HANDLED is returned when no further action is required. IRQ_WAKE_THREAD causes the genirq code to invoke the threaded (main) handler. When IRQ_WAKE_THREAD is returned handler must have disabled the interrupt on the device level. This is mandatory for shared interrupt handlers, but we need to do it as well for obscure x86 hardware where disabling an interrupt on the IO_APIC level redirects the interrupt to the legacy PIC interrupt lines. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu>
2009-03-23Merge branch 'cpus4096' into irq/threadedThomas Gleixner
Conflicts: arch/parisc/kernel/irq.c kernel/irq/handle.c Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-16Merge branches 'irq/genirq' and 'linus' into irq/coreIngo Molnar
2009-03-13genirq: deprecate __do_IRQThomas Gleixner
Two years migration time is enough. Remove the compability cruft. Add the deprecated warning in kernel/irq/handle.c because marking __do_IRQ itself is way too noisy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-13genirq: use kzalloc instead of explicit zero initializationThomas Gleixner
Impact: simplification Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Peter Zijlstra <peterz@infradead.org>
2009-03-13genirq: remove redundant if conditionThomas Gleixner
Impact: cleanup The code is only compiled if CONFIG_GENERIC_HARDIRQS=y so another check for this define in the code is redundant. Remove it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-03-12irq: export remove_irq() and setup_irq() symbolsMagnus Damm
Export the setup_irq() and remove_irq() symbols. I'd like to export these functions since I have timer code that needs to use setup_irq() early on (too early for request_irq()), and the same code can also be compiled as a module. Signed-off-by: Magnus Damm <damm@igel.co.jp> LKML-Reference: <20090312120559.2926.82371.sendpatchset@rx1.opensource.se> [ changed to _GPL as these are special APIs deep inside the irq layer. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12irq: match remove_irq() args with setup_irq()Magnus Damm
Modify remove_irq() to match setup_irq(). Signed-off-by: Magnus Damm <damm@igel.co.jp> LKML-Reference: <20090312120551.2926.43942.sendpatchset@rx1.opensource.se> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-12irq: add remove_irq() for freeing of setup_irq() irqsMagnus Damm
Impact: add new API This patch adds a remove_irq() function for releasing interrupts requested with setup_irq(). Without this patch we have no way of releasing such interrupts since free_irq() today tries to kfree() the irqaction passed with setup_irq(). Signed-off-by: Magnus Damm <damm@igel.co.jp> LKML-Reference: <20090312120542.2926.56609.sendpatchset@rx1.opensource.se> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-06Merge branch 'x86/core' into tracing/texteditIngo Molnar
Conflicts: arch/x86/Kconfig block/blktrace.c kernel/irq/handle.c Semantic conflict: kernel/trace/blktrace.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-03genirq: assert that irq handlers are indeed running in hardirq contextPeter Zijlstra
Make sure the genirq layer handlers are indeed running handlers in hardirq context. That is the genirq expectation and doing anything else is broken. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <1236006812.5330.632.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-02Merge branch 'linus' into irq/genirqIngo Molnar
2009-02-26tracing, genirq: add irq enter and exit trace eventsJason Baron
Impact: add new tracepoints Add them to the generic IRQ code, that way every architecture gets these new tracepoints, not just x86. Using Steve's new 'TRACE_FORMAT', I can get function graph trace as follows using the original two IRQ tracepoints: 3) | handle_IRQ_event() { 3) | /* (irq_handler_entry) irq=28 handler=eth0 */ 3) | e1000_intr_msi() { 3) 2.460 us | __napi_schedule(); 3) 9.416 us | } 3) | /* (irq_handler_exit) irq=28 handler=eth0 return=handled */ 3) + 22.935 us | } Signed-off-by: Jason Baron <jbaron@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17irq: name 'p' variables a bit betterIngo Molnar
'p' stands for pointer - make it clear in setup_irq() and free_irq() what kind of pointer it is. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17irq: further clean up the free_irq() code flowIngo Molnar
Linus noticed that the 'pp' variable can be eliminated altogether, and the loop can be cleaned up further. Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15irq: refactor and clean up the free_irq() code flowIngo Molnar
Impact: cleanup - separate out the loop from the actual freeing logic, this wins us two indentation levels allowing a number of followup prettifications - turn the WARN_ON() into a more informative WARN(). - clean up the comments and the code flow some more Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-15irq: clean up manage.cIngo Molnar
- make printk message git-greppable - fix a few style details Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-13Merge branches 'irq/genirq', 'irq/sparseirq' and 'irq/urgent' into irq/coreIngo Molnar
2009-02-13irq: use GFP_KERNEL for action allocation in request_irq()Johannes Weiner
request_irq() calls into proc code via __setup_irq() which is not safe in an atomic context, so request_irq() can itself use the more reliable GFP_KERNEL allocation for the action descriptor. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09Merge commit 'v2.6.29-rc4' into core/percpuIngo Molnar
Conflicts: arch/x86/mach-voyager/voyager_smp.c arch/x86/mm/fault.c
2009-02-09kernel/irq: fix sparse warning: make symbol staticHannes Eder
While being at it make every occurrence of 'do_irq_select_affinity' have the same signature in terms of signedness of the first argument. Fix this sparse warning: kernel/irq/manage.c:112:5: warning: symbol 'do_irq_select_affinity' was not declared. Should it be static? Also rename do_irq_select_affinity() to setup_affinity() - shorter name and clearer naming. Signed-off-by: Hannes Eder <hannes@hanneseder.net> Acked-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09irq: optimize init_kstat_irqs/init_copy_kstat_irqsYinghai Lu
Simplify and make init_kstat_irqs etc more type proof, suggested by Andrew. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-09irq: clear kstat_irqsYinghai Lu
Impact: get correct kstat_irqs [/proc/interrupts] for msi/msi-x etc need to call clear_kstat_irqs(), so when we reuse that irq_desc, we get correct kstat in /proc/interrupts. This makes /proc/interrupts not have <NULL> entries. Don't need to worry about arch that doesn't support genirq, because they will not call dynamic_irq_cleanup(). v2: simplify and make clear_kstat_irqs more robust Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-05Merge branch 'x86/urgent' into x86/apicIngo Molnar
Conflicts: arch/x86/mach-default/setup.c Semantic merge: arch/x86/kernel/irqinit_32.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-04Merge branch 'core/xen' into x86/urgentIngo Molnar
2009-02-01irq, x86: fix lock status with numa_migrate_irq_descYinghai Lu
Eric Paris reported: > I have an hp dl785g5 which is unable to successfully run > 2.6.29-0.66.rc3.fc11.x86_64 or 2.6.29-rc2-next-20090126. During bootup > (early in userspace daemons starting) I get the below BUG, which quickly > renders the machine dead. I assume it is because sparse_irq_lock never > gets released when the BUG kills that task. Adjust lock sequence when migrating a descriptor with CONFIG_NUMA_MIGRATE_IRQ_DESC enabled. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-31Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: export __set_irq_handler() and handle_level_irq()
2009-01-30Merge branch 'linus' into core/percpuIngo Molnar
Conflicts: kernel/irq/handle.c
2009-01-28Merge branch 'core/percpu' into x86/coreIngo Molnar
Conflicts: kernel/irq/handle.c
2009-01-27cpumask fallout: Initialize irq_default_affinity earlierDavid Daney
Move the initialization of irq_default_affinity to early_irq_init as core_initcall is too late. irq_default_affinity can be used in init_IRQ and potentially timer and SMP init as well. All of these happen before core_initcall. Moving the initialization to early_irq_init ensures that it is initialized before it is used. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Mike Travis <travis@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-27Make irq_*_affinity depend on CONFIG_GENERIC_HARDIRQS too.David Daney
In interrupt.h these functions are declared only if CONFIG_GENERIC_HARDIRQS is set. We should define them under identical conditions. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-16irq: provide debug_poll_all_shared_irqs() method under CONFIG_DEBUG_SHIRQIngo Molnar
Provide a shared interrupt debug facility under CONFIG_DEBUG_SHIRQ: it uses the existing irqpoll facilities to iterate through all registered interrupt handlers and call those which can handle shared IRQ lines. This can be handy for suspend/resume debugging: if we call this function early during resume we can trigger crashes in those drivers which have incorrect assumptions about when exactly their ISRs will be called during suspend/resume. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-16Merge branch 'linus' into irq/genirqIngo Molnar
2009-01-14irq: export __set_irq_handler() and handle_level_irq()Ingo Molnar
Impact: build fix ARM updates broke x86 allmodconfig builds: ERROR: "__set_irq_handler" [drivers/mfd/pcf50633-core.ko] undefined! ERROR: "handle_level_irq" [drivers/mfd/pcf50633-core.ko] undefined! Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-12x86: arch_probe_nr_irqsYinghai Lu
Impact: save RAM with large NR_CPUS, get smaller nr_irqs Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11cpumask, irq: non-x86 build failuresMike Travis
Ingo Molnar wrote: > All non-x86 architectures fail to build: > > In file included from /home/mingo/tip/include/linux/random.h:11, > from /home/mingo/tip/include/linux/stackprotector.h:6, > from /home/mingo/tip/init/main.c:17: > /home/mingo/tip/include/linux/irqnr.h:26:63: error: asm/irq_vectors.h: No such file or directory Do not include asm/irq_vectors.h in generic code - it's not available on all architectures. Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-11kstat: modify kstat_irqs_legacy to be variable sizedMike Travis
Impact: reduce memory usage. Allocate kstat_irqs_legacy based on nr_cpu_ids to deal with this memory usage bump when NR_CPUS bumped from 128 to 4096: 8192 +253952 262144 +3100% kstat_irqs_legacy(.bss) This is only when CONFIG_SPARSE_IRQS=y. Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11irq: initialize nr_irqs based on nr_cpu_idsMike Travis
Impact: Reduce memory usage. This is the second half of the changes to make the irq_desc_ptrs be variable sized based on nr_cpu_ids. This is done by adding a new "max_nr_irqs" macro to irq_vectors.h (and a dummy in irqnr.h) to return a max NR_IRQS value based on NR_CPUS or nr_cpu_ids. This necessitated moving the define of MAX_IO_APICS to a separate file (asm/apicnum.h) so it could be included without the baggage of the other asm/apicdef.h declarations. Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11irq: allocate irq_desc_ptrs array based on nr_irqsMike Travis
Impact: allocate irq_desc_ptrs in preparation for making it variable-sized. This addresses this memory usage bump when NR_CPUS bumped from 128 to 4096: 34816 +229376 264192 +658% irq_desc_ptrs(.data.read_mostly) The patch is split into two parts, the first simply allocates the irq_desc_ptrs array. Then next will deal with making it variable. This is only when CONFIG_SPARSE_IRQS=y. Signed-off-by: Mike Travis <travis@sgi.com>
2009-01-11irq: use WARN() instead of WARN_ON().Mike Travis
Impact: cleanup WARN msg. Ingo requested: > While at it, could you please also convert this to a WARN() construct > instead? (in a separate commit) ... and it shall be done. ;-) Signed-off-by: Mike Travis <travis@sgi.com>