| Age | Commit message (Collapse) | Author |
|---|
|
For helpers, the argument type ARG_CONST_SIZE_OR_ZERO permits the
access size to be 0 when accessing the previous argument (arg).
Right now, it requires the arg needs to be NULL when size passed
is 0 or could be 0. It also requires a non-NULL arg when the size
is proved to be non-0.
This patch changes verifier ARG_CONST_SIZE_OR_ZERO behavior
such that for size-0 or possible size-0, it is not required
the arg equal to NULL.
There are a couple of reasons for this semantics change, and
all of them intends to simplify user bpf programs which
may improve user experience and/or increase chances of
verifier acceptance. Together with the next patch which
changes bpf_probe_read arg2 type from ARG_CONST_SIZE to
ARG_CONST_SIZE_OR_ZERO, the following two examples, which
fail the verifier currently, are able to get verifier acceptance.
Example 1:
unsigned long len = pend - pstart;
len = len > MAX_PAYLOAD_LEN ? MAX_PAYLOAD_LEN : len;
len &= MAX_PAYLOAD_LEN;
bpf_probe_read(data->payload, len, pstart);
It does not have test for "len > 0" and it failed the verifier.
Users may not be aware that they have to add this test.
Converting the bpf_probe_read helper to have
ARG_CONST_SIZE_OR_ZERO helps the above code get
verifier acceptance.
Example 2:
Here is one example where llvm "messed up" the code and
the verifier fails.
......
unsigned long len = pend - pstart;
if (len > 0 && len <= MAX_PAYLOAD_LEN)
bpf_probe_read(data->payload, len, pstart);
......
The compiler generates the following code and verifier fails:
......
39: (79) r2 = *(u64 *)(r10 -16)
40: (1f) r2 -= r8
41: (bf) r1 = r2
42: (07) r1 += -1
43: (25) if r1 > 0xffe goto pc+3
R0=inv(id=0) R1=inv(id=0,umax_value=4094,var_off=(0x0; 0xfff))
R2=inv(id=0) R6=map_value(id=0,off=0,ks=4,vs=4095,imm=0) R7=inv(id=0)
R8=inv(id=0) R9=inv0 R10=fp0
44: (bf) r1 = r6
45: (bf) r3 = r8
46: (85) call bpf_probe_read#45
R2 min value is negative, either use unsigned or 'var &= const'
......
The compiler optimization is correct. If r1 = 0,
r1 - 1 = 0xffffffffffffffff > 0xffe. If r1 != 0, r1 - 1 will not wrap.
r1 > 0xffe at insn #43 can actually capture
both "r1 > 0" and "len <= MAX_PAYLOAD_LEN".
This however causes an issue in verifier as the value range of arg2
"r2" does not properly get refined and lead to verification failure.
Relaxing bpf_prog_read arg2 from ARG_CONST_SIZE to ARG_CONST_SIZE_OR_ZERO
allows the following simplied code:
unsigned long len = pend - pstart;
if (len <= MAX_PAYLOAD_LEN)
bpf_probe_read(data->payload, len, pstart);
The llvm compiler will generate less complex code and the
verifier is able to verify that the program is okay.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NACK'd by x86 maintainer.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Error injection is sloppy and very ad-hoc. BPF could fill this niche
perfectly with it's kprobe functionality. We could make sure errors are
only triggered in specific call chains that we care about with very
specific situations. Accomplish this with the bpf_override_funciton
helper. This will modify the probe'd callers return value to the
specified value and set the PC to an override function that simply
returns, bypassing the originally probed function. This gives us a nice
clean way to implement systematic error injection for all of our code
paths.
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cgroup v2 lacks the device controller, provided by cgroup v1.
This patch adds a new eBPF program type, which in combination
of previously added ability to attach multiple eBPF programs
to a cgroup, will provide a similar functionality, but with some
additional flexibility.
This patch introduces a BPF_PROG_TYPE_CGROUP_DEVICE program type.
A program takes major and minor device numbers, device type
(block/character) and access type (mknod/read/write) as parameters
and returns an integer which defines if the operation should be
allowed or terminated with -EPERM.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Thanks to the ability to load a program for a specific device,
running verifier twice is no longer needed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fact that we don't know which device the program is going
to be used on is quite limiting in current eBPF infrastructure.
We have to reverse or limit the changes which kernel makes to
the loaded bytecode if we want it to be offloaded to a networking
device. We also have to invent new APIs for debugging and
troubleshooting support.
Make it possible to load programs for a specific netdev. This
helps us to bring the debug information closer to the core
eBPF infrastructure (e.g. we will be able to reuse the verifer
log in device JIT). It allows device JITs to perform translation
on the original bytecode.
__bpf_prog_get() when called to get a reference for an attachment
point will now refuse to give it if program has a device assigned.
Following patches will add a version of that function which passes
the expected netdev in. @type argument in __bpf_prog_get() is
renamed to attach_type to make it clearer that it's only set on
attachment.
All calls to ndo_bpf are protected by rtnl, only verifier callbacks
are not. We need a wait queue to make sure netdev doesn't get
destroyed while verifier is still running and calling its driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
do_check() can fail early without allocating env->cur_state under
memory pressure. Syzkaller found the stack below on the linux-next
tree because of this.
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
(ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 27062 Comm: syz-executor5 Not tainted 4.14.0-rc7+ #106
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
task: ffff8801c2c74700 task.stack: ffff8801c3e28000
RIP: 0010:free_verifier_state kernel/bpf/verifier.c:347 [inline]
RIP: 0010:bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533
RSP: 0018:ffff8801c3e2f5c8 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 00000000fffffff4 RCX: 0000000000000000
RDX: 0000000000000070 RSI: ffffffff817d5aa9 RDI: 0000000000000380
RBP: ffff8801c3e2f668 R08: 0000000000000000 R09: 1ffff100387c5d9f
R10: 00000000218c4e80 R11: ffffffff85b34380 R12: ffff8801c4dc6a28
R13: 0000000000000000 R14: ffff8801c4dc6a00 R15: ffff8801c4dc6a20
FS: 00007f311079b700(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004d4a24 CR3: 00000001cbcd0000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
bpf_prog_load+0xcbb/0x18e0 kernel/bpf/syscall.c:1166
SYSC_bpf kernel/bpf/syscall.c:1690 [inline]
SyS_bpf+0xae9/0x4620 kernel/bpf/syscall.c:1652
entry_SYSCALL_64_fastpath+0x1f/0xbe
RIP: 0033:0x452869
RSP: 002b:00007f311079abe8 EFLAGS: 00000212 ORIG_RAX: 0000000000000141
RAX: ffffffffffffffda RBX: 0000000000758020 RCX: 0000000000452869
RDX: 0000000000000030 RSI: 0000000020168000 RDI: 0000000000000005
RBP: 00007f311079aa20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000212 R12: 00000000004b7550
R13: 00007f311079ab58 R14: 00000000004b7560 R15: 0000000000000000
Code: df 48 c1 ea 03 80 3c 02 00 0f 85 e6 0b 00 00 4d 8b 6e 20 48 b8 00 00 00 00 00 fc ff df 49 8d bd 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 b6 0b 00 00 49 8b bd 80 03 00 00 e8 d6 0c 26
RIP: free_verifier_state kernel/bpf/verifier.c:347 [inline] RSP: ffff8801c3e2f5c8
RIP: bpf_check+0xcf4/0x19c0 kernel/bpf/verifier.c:4533 RSP: ffff8801c3e2f5c8
---[ end trace c8d37f339dc64004 ]---
Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption")
Fixes: 1969db47f8d0 ("bpf: fix verifier memory leaks")
Signed-off-by: Craig Gallek <kraig@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The bpf_verifer_ops array is generated dynamically and may be
empty depending on configuration, which then causes an out
of bounds access:
kernel/bpf/verifier.c: In function 'bpf_check':
kernel/bpf/verifier.c:4320:29: error: array subscript is above array bounds [-Werror=array-bounds]
This adds a check to the start of the function as a workaround.
I would assume that the function is never called in that configuration,
so the warning is probably harmless.
Fixes: 00176a34d9e2 ("bpf: remove the verifier ops from program structure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I ran into this link error with the latest net-next plus linux-next
trees when networking is disabled:
kernel/bpf/verifier.o:(.rodata+0x2958): undefined reference to `tc_cls_act_analyzer_ops'
kernel/bpf/verifier.o:(.rodata+0x2970): undefined reference to `xdp_analyzer_ops'
It seems that the code was written to deal with varying contents of
the arrray, but the actual #ifdef was missing. Both tc_cls_act_analyzer_ops
and xdp_analyzer_ops are defined in the core networking code, so adding
a check for CONFIG_NET seems appropriate here, and I've verified this with
many randconfig builds
Fixes: 4f9218aaf8a4 ("bpf: move knowledge about post-translation offsets out of verifier")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Follow-up to 0fd4759c5515 ("bpf: fix pattern matches for direct
packet access") to cover also the remaining data_meta/data matches
in the verifier. The matches are also refactored a bit to simplify
handling of all the cases.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Two minor cleanups after Dave's recent merge in f8ddadc4db6c
("Merge git://git.kernel.org...") of net into net-next in
order to get the code in line with what was done originally
in the net tree: i) use max() instead of max_t() since both
ranges are u16, ii) don't split the direct access test cases
in the middle with bpf_exit test cases from 390ee7e29fc
("bpf: enforce return code for cgroup-bpf programs").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
fix verifier memory leaks
Fixes: 638f5b90d460 ("bpf: reduce verifier memory consumption")
Signed-off-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the verifier got progressively smarter over time and size of its internal
state grew as well. Time to reduce the memory consumption.
Before:
sizeof(struct bpf_verifier_state) = 6520
After:
sizeof(struct bpf_verifier_state) = 896
It's done by observing that majority of BPF programs use little to
no stack whereas verifier kept all of 512 stack slots ready always.
Instead dynamically reallocate struct verifier state when stack
access is detected.
Runtime difference before vs after is within a noise.
The number of processed instructions stays the same.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There were quite a few overlapping sets of changes here.
Daniel's bug fix for off-by-ones in the new BPF branch instructions,
along with the added allowances for "data_end > ptr + x" forms
collided with the metadata additions.
Along with those three changes came veritifer test cases, which in
their final form I tried to group together properly. If I had just
trimmed GIT's conflict tags as-is, this would have split up the
meta tests unnecessarily.
In the socketmap code, a set of preemption disabling changes
overlapped with the rename of bpf_compute_data_end() to
bpf_compute_data_pointers().
Changes were made to the mv88e6060.c driver set addr method
which got removed in net-next.
The hyperv transport socket layer had a locking change in 'net'
which overlapped with a change of socket state macro usage
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexander had a test program with direct packet access, where
the access test was in the form of data + X > data_end. In an
unrelated change to the program LLVM decided to swap the branches
and emitted code for the test in form of data + X <= data_end.
We hadn't seen these being generated previously, thus verifier
would reject the program. Therefore, fix up the verifier to
detect all test cases, so we don't run into such issues in the
future.
Fixes: b4e432f1000a ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier")
Reported-by: Alexander Alemayhu <alexander@alemayhu.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
During review I noticed that the current logic for direct packet
access marking in check_cond_jmp_op() has an off by one for the
upper right range border when marking in find_good_pkt_pointers()
with BPF_JLT and BPF_JLE. It's not really harmful given access
up to pkt_end is always safe, but we should nevertheless correct
the range marking before it becomes ABI. If pkt_data' denotes a
pkt_data derived pointer (pkt_data + X), then for pkt_data' < pkt_end
in the true branch as well as for pkt_end <= pkt_data' in the false
branch we mark the range with X although it should really be X - 1
in these cases. For example, X could be pkt_end - pkt_data, then
when testing for pkt_data' < pkt_end the verifier simulation cannot
deduce that a byte load of pkt_data' - 1 would succeed in this
branch.
Fixes: b4e432f1000a ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the fact that verifier ops are now separate from program
ops to define a separate set of callbacks for verification of
already translated programs.
Since we expect the analyzer ops to be defined only for
a small subset of all program types initialize their array
by hand (don't use linux/bpf_types.h).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the verifier ops don't have to be associated with
the program for its entire lifetime we can move it to
verifier's struct bpf_verifier_env.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct bpf_verifier_ops contains both verifier ops and operations
used later during program's lifetime (test_run). Split the runtime
ops into a different structure.
BPF_PROG_TYPE() will now append ## _prog_ops or ## _verifier_ops
to the names.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit f1174f77b50c ("bpf/verifier: rework value tracking")
removed the crafty selection of which pointer types are
allowed to be modified. This is OK for most pointer types
since adjust_ptr_min_max_vals() will catch operations on
immutable pointers. One exception is PTR_TO_CTX which is
now allowed to be offseted freely.
The intent of aforementioned commit was to allow context
access via modified registers. The offset passed to
->is_valid_access() verifier callback has been adjusted
by the value of the variable offset.
What is missing, however, is taking the variable offset
into account when the context register is used. Or in terms
of the code adding the offset to the value passed to the
->convert_ctx_access() callback. This leads to the following
eBPF user code:
r1 += 68
r0 = *(u32 *)(r1 + 8)
exit
being translated to this in kernel space:
0: (07) r1 += 68
1: (61) r0 = *(u32 *)(r1 +180)
2: (95) exit
Offset 8 is corresponding to 180 in the kernel, but offset
76 is valid too. Verifier will "accept" access to offset
68+8=76 but then "convert" access to offset 8 as 180.
Effective access to offset 248 is beyond the kernel context.
(This is a __sk_buff example on a debug-heavy kernel -
packet mark is 8 -> 180, 76 would be data.)
Dereferencing the modified context pointer is not as easy
as dereferencing other types, because we have to translate
the access to reading a field in kernel structures which is
usually at a different offset and often of a different size.
To allow modifying the pointer we would have to make sure
that given eBPF instruction will always access the same
field or the fields accessed are "compatible" in terms of
offset and size...
Disallow dereferencing modified context pointers and add
to selftests the test case described here.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch connects cpumap to the xdp_do_redirect_map infrastructure.
Still no SKB allocation are done yet. The XDP frames are transferred
to the other CPU, but they are simply refcnt decremented on the remote
CPU. This served as a good benchmark for measuring the overhead of
remote refcnt decrement. If driver page recycle cache is not
efficient then this, exposes a bottleneck in the page allocator.
A shout-out to MST's ptr_ring, which is the secret behind is being so
efficient to transfer memory pointers between CPUs, without constantly
bouncing cache-lines between CPUs.
V3: Handle !CONFIG_BPF_SYSCALL pointed out by kbuild test robot.
V4: Make Generic-XDP aware of cpumap type, but don't allow redirect yet,
as implementation require a separate upstream discussion.
V5:
- Fix a maybe-uninitialized pointed out by kbuild test robot.
- Restrict bpf-prog side access to cpumap, open when use-cases appear
- Implement cpu_map_enqueue() as a more simple void pointer enqueue
V6:
- Allow cpumap type for usage in helper bpf_redirect_map,
general bpf-prog side restriction moved to earlier patch.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 'cpumap' is primarily used as a backend map for XDP BPF helper
call bpf_redirect_map() and XDP_REDIRECT action, like 'devmap'.
This patch implement the main part of the map. It is not connected to
the XDP redirect system yet, and no SKB allocation are done yet.
The main concern in this patch is to ensure the datapath can run
without any locking. This adds complexity to the setup and tear-down
procedure, which assumptions are extra carefully documented in the
code comments.
V2:
- make sure array isn't larger than NR_CPUS
- make sure CPUs added is a valid possible CPU
V3: fix nitpicks from Jakub Kicinski <kubakici@wp.pl>
V5:
- Restrict map allocation to root / CAP_SYS_ADMIN
- WARN_ON_ONCE if queue is not empty on tear-down
- Return -EPERM on memlock limit instead of -ENOMEM
- Error code in __cpu_map_entry_alloc() also handle ptr_ring_cleanup()
- Moved cpu_map_enqueue() to next patch
V6: all notice by Daniel Borkmann
- Fix err return code in cpu_map_alloc() introduced in V5
- Move cpu_possible() check after max_entries boundary check
- Forbid usage initially in check_map_func_compatibility()
V7:
- Fix alloc error path spotted by Daniel Borkmann
- Did stress test adding+removing CPUs from the map concurrently
- Fixed refcnt issue on cpu_map_entry, kthread started too soon
- Make sure packets are flushed during tear-down, involved use of
rcu_barrier() and kthread_run only exit after queue is empty
- Fix alloc error path in __cpu_map_entry_alloc() for ptr_ring
V8:
- Nitpicking comments and gramma by Edward Cree
- Fix missing semi-colon introduced in V7 due to rebasing
- Move struct bpf_cpu_map_entry members cpu+map_id to tracepoint patch
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use a simplified is_valid_access() callback when verifier
is used for program analysis by non-host JITs. This allows
us to teach the verifier about packet start and packet end
offsets for direct packet access.
We can extend the callback as needed but for most packet
processing needs there isn't much more the offloads may
require.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Verifier log buffer can be quite large (up to 16MB currently).
As Eric Dumazet points out if we allow multiple verification
requests to proceed simultaneously, malicious user may use the
verifier as a way of allocating large amounts of unswappable
memory to OOM the host.
Switch to a strategy of allocating a smaller buffer (1024B)
and writing it out into the user buffer after every print.
While at it remove the old BUG_ON().
This is in preparation of the global verifier lock removal.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Separate the instruction printing into a standalone source file.
This way sneaky code from tools/ can compile it in directly.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The biggest piece of global state protected by the verifier lock
is the verifier_log. Move that log to struct bpf_verifier_env.
struct bpf_verifier_env has to be passed now to all invocations
of verbose().
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Put the loose log_* variables into a structure. This will make
it simpler to remove the global verifier state in following patches.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
|
|
while processing Rx = Ry instruction the verifier does
regs[insn->dst_reg] = regs[insn->src_reg]
which often clears write mark (when Ry doesn't have it)
that was just set by check_reg_arg(Rx) prior to the assignment.
That causes mark_reg_read() to keep marking Rx in this block as
REG_LIVE_READ (since the logic incorrectly misses that it's
screened by the write) and in many of its parents (until lucky
write into the same Rx or beginning of the program).
That causes is_state_visited() logic to miss many pruning opportunities.
Furthermore mark_reg_read() logic propagates the read mark
for BPF_REG_FP as well (though it's readonly) which causes
harmless but unnecssary work during is_state_visited().
Note that do_propagate_liveness() skips FP correctly,
so do the same in mark_reg_read() as well.
It saves 0.2 seconds for the test below
program before after
bpf_lb-DLB_L3.o 2604 2304
bpf_lb-DLB_L4.o 11159 3723
bpf_lb-DUNKNOWN.o 1116 1110
bpf_lxc-DDROP_ALL.o 34566 28004
bpf_lxc-DUNKNOWN.o 53267 39026
bpf_netdev.o 17843 16943
bpf_overlay.o 8672 7929
time ~11 sec ~4 sec
Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hardware pmu counters are limited resources. When there are more
pmu based perf events opened than available counters, kernel will
multiplex these events so each event gets certain percentage
(but not 100%) of the pmu time. In case that multiplexing happens,
the number of samples or counter value will not reflect the
case compared to no multiplexing. This makes comparison between
different runs difficult.
Typically, the number of samples or counter value should be
normalized before comparing to other experiments. The typical
normalization is done like:
normalized_num_samples = num_samples * time_enabled / time_running
normalized_counter_value = counter_value * time_enabled / time_running
where time_enabled is the time enabled for event and time_running is
the time running for event since last normalization.
This patch adds helper bpf_perf_event_read_value for kprobed based perf
event array map, to read perf counter and enabled/running time.
The enabled/running time is accumulated since the perf event open.
To achieve scaling factor between two bpf invocations, users
can can use cpu_id as the key (which is typical for perf array usage model)
to remember the previous value and do the calculation inside the
bpf program.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
with addition of tnum logic the verifier got smart enough and
we can enforce return codes at program load time.
For now do so for cgroup-bpf program types.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
BPF_NEG takes only one operand, unlike the bulk of BPF_ALU[64] which are
compound-assignments. So give it its own format in print_bpf_insn().
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
print_bpf_insn() was treating all BPF_ALU[64] the same, but BPF_END has a
different structure: it has a size in insn->imm (even if it's BPF_X) and
uses the BPF_SRC (X or K) to indicate which endianness to use. So it
needs different code to print it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This work enables generic transfer of metadata from XDP into skb. The
basic idea is that we can make use of the fact that the resulting skb
must be linear and already comes with a larger headroom for supporting
bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work
on a similar principle and introduce a small helper bpf_xdp_adjust_meta()
for adjusting a new pointer called xdp->data_meta. Thus, the packet has
a flexible and programmable room for meta data, followed by the actual
packet data. struct xdp_buff is therefore laid out that we first point
to data_hard_start, then data_meta directly prepended to data followed
by data_end marking the end of packet. bpf_xdp_adjust_head() takes into
account whether we have meta data already prepended and if so, memmove()s
this along with the given offset provided there's enough room.
xdp->data_meta is optional and programs are not required to use it. The
rationale is that when we process the packet in XDP (e.g. as DoS filter),
we can push further meta data along with it for the XDP_PASS case, and
give the guarantee that a clsact ingress BPF program on the same device
can pick this up for further post-processing. Since we work with skb
there, we can also set skb->mark, skb->priority or other skb meta data
out of BPF, thus having this scratch space generic and programmable
allows for more flexibility than defining a direct 1:1 transfer of
potentially new XDP members into skb (it's also more efficient as we
don't need to initialize/handle each of such new members). The facility
also works together with GRO aggregation. The scratch space at the head
of the packet can be multiple of 4 byte up to 32 byte large. Drivers not
yet supporting xdp->data_meta can simply be set up with xdp->data_meta
as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out,
such that the subsequent match against xdp->data for later access is
guaranteed to fail.
The verifier treats xdp->data_meta/xdp->data the same way as we treat
xdp->data/xdp->data_end pointer comparisons. The requirement for doing
the compare against xdp->data is that it hasn't been modified from it's
original address we got from ctx access. It may have a range marking
already from prior successful xdp->data/xdp->data_end pointer comparisons
though.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 109980b894e9 ("bpf: don't select potentially stale
ri->map from buggy xdp progs") passed the pointer to the prog
itself to be loaded into r4 prior on bpf_redirect_map() helper
call, so that we can store the owner into ri->map_owner out of
the helper.
Issue with that is that the actual address of the prog is still
subject to change when subsequent rewrites occur that require
slow path in bpf_prog_realloc() to alloc more memory, e.g. from
patching inlining helper functions or constant blinding. Thus,
we really need to take prog->aux as the address we're holding,
which also works with prog clones as they share the same aux
object.
Instead of then fetching aux->prog during runtime, which could
potentially incur cache misses due to false sharing, we are
going to just use aux for comparison on the map owner. This
will also keep the patchlet of the same size, and later check
in xdp_map_invalid() only accesses read-only aux pointer from
the prog, it's also in the same cacheline already from prior
access when calling bpf_func.
Fixes: 109980b894e9 ("bpf: don't select potentially stale ri->map from buggy xdp progs")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Neither ___bpf_prog_run nor the JITs accept it.
Also adds a new test case.
Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We can potentially run into a couple of issues with the XDP
bpf_redirect_map() helper. The ri->map in the per CPU storage
can become stale in several ways, mostly due to misuse, where
we can then trigger a use after free on the map:
i) prog A is calling bpf_redirect_map(), returning XDP_REDIRECT
and running on a driver not supporting XDP_REDIRECT yet. The
ri->map on that CPU becomes stale when the XDP program is unloaded
on the driver, and a prog B loaded on a different driver which
supports XDP_REDIRECT return code. prog B would have to omit
calling to bpf_redirect_map() and just return XDP_REDIRECT, which
would then access the freed map in xdp_do_redirect() since not
cleared for that CPU.
ii) prog A is calling bpf_redirect_map(), returning a code other
than XDP_REDIRECT. prog A is then detached, which triggers release
of the map. prog B is attached which, similarly as in i), would
just return XDP_REDIRECT without having called bpf_redirect_map()
and thus be accessing the freed map in xdp_do_redirect() since
not cleared for that CPU.
iii) prog A is attached to generic XDP, calling the bpf_redirect_map()
helper and returning XDP_REDIRECT. xdp_do_generic_redirect() is
currently not handling ri->map (will be fixed by Jesper), so it's
not being reset. Later loading a e.g. native prog B which would,
say, call bpf_xdp_redirect() and then returns XDP_REDIRECT would
find in xdp_do_redirect() that a map was set and uses that causing
use after free on map access.
Fix thus needs to avoid accessing stale ri->map pointers, naive
way would be to call a BPF function from drivers that just resets
it to NULL for all XDP return codes but XDP_REDIRECT and including
XDP_REDIRECT for drivers not supporting it yet (and let ri->map
being handled in xdp_do_generic_redirect()). There is a less
intrusive way w/o letting drivers call a reset for each BPF run.
The verifier knows we're calling into bpf_xdp_redirect_map()
helper, so it can do a small insn rewrite transparent to the prog
itself in the sense that it fills R4 with a pointer to the own
bpf_prog. We have that pointer at verification time anyway and
R4 is allowed to be used as per calling convention we scratch
R0 to R5 anyway, so they become inaccessible and program cannot
read them prior to a write. Then, the helper would store the prog
pointer in the current CPUs struct redirect_info. Later in
xdp_do_*_redirect() we check whether the redirect_info's prog
pointer is the same as passed xdp_prog pointer, and if that's
the case then all good, since the prog holds a ref on the map
anyway, so it is always valid at that point in time and must
have a reference count of at least 1. If in the unlikely case
they are not equal, it means we got a stale pointer, so we clear
and bail out right there. Also do reset map and the owning prog
in bpf_xdp_redirect(), so that bpf_xdp_redirect_map() and
bpf_xdp_redirect() won't get mixed up, only the last call should
take precedence. A tc bpf_redirect() doesn't use map anywhere
yet, so no need to clear it there since never accessed in that
layer.
Note that in case the prog is released, and thus the map as
well we're still under RCU read critical section at that time
and have preemption disabled as well. Once we commit with the
__dev_map_insert_ctx() from xdp_do_redirect_map() and set the
map to ri->map_to_flush, we still wait for a xdp_do_flush_map()
to finish in devmap dismantle time once flush_needed bit is set,
so that is fine.
Fixes: 97f91a7cf04f ("bpf: add bpf_redirect_map helper routine")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The liveness tracking algorithm is quite subtle; add comments to explain it.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The optimisation it does is broken when the 'new' register value has a
variable offset and the 'old' was constant. I broke it with my pointer
types unification (see Fixes tag below), before which the 'new' value
would have type PTR_TO_MAP_VALUE_ADJ and would thus not compare equal;
other changes in that patch mean that its original behaviour (ignore
min/max values) cannot be restored.
Tests on a sample set of cilium programs show no change in count of
processed instructions.
Fixes: f1174f77b50c ("bpf/verifier: rework value tracking")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The fact that writes occurred in reaching the continuation state does
not screen off its reads from us, because we're not really its parent.
So detect 'not really the parent' in do_propagate_liveness, and ignore
write marks in that case.
Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 9015d2f59535 ("bpf: inline htab_map_lookup_elem()") was
making the assumption that a direct call emission to the function
__htab_map_lookup_elem() will always work out for JITs.
This is currently true since all JITs we have are for 64 bit archs,
but in case of 32 bit JITs like upcoming arm32, we get a NULL pointer
dereference when executing the call to __htab_map_lookup_elem()
since passed arguments are of a different size (due to pointer args)
than what we do out of BPF. Guard and thus limit this for now for
the current 64 bit JITs only.
Reported-by: Shubham Bansal <illusionist.neo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In check_map_func_compatibility(), a 'break' has been accidentally
removed for the BPF_MAP_TYPE_ARRAY_OF_MAPS and BPF_MAP_TYPE_HASH_OF_MAPS
cases. This patch adds it back.
Fixes: 174a79ff9515 ("bpf: sockmap with sk redirect support")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Using parent->regs[] when propagating REG_LIVE_READ for spilled regs
doesn't work since parent->regs[] denote the set of normal registers
but not spilled ones. Propagate to the correct regs.
Fixes: dc503a8ad984 ("bpf/verifier: track liveness for pruning")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Recently we added a new map type called dev map used to forward XDP
packets between ports (6093ec2dc313). This patches introduces a
similar notion for sockets.
A sockmap allows users to add participating sockets to a map. When
sockets are added to the map enough context is stored with the
map entry to use the entry with a new helper
bpf_sk_redirect_map(map, key, flags)
This helper (analogous to bpf_redirect_map in XDP) is given the map
and an entry in the map. When called from a sockmap program, discussed
below, the skb will be sent on the socket using skb_send_sock().
With the above we need a bpf program to call the helper from that will
then implement the send logic. The initial site implemented in this
series is the recv_sock hook. For this to work we implemented a map
attach command to add attributes to a map. In sockmap we add two
programs a parse program and a verdict program. The parse program
uses strparser to build messages and pass them to the verdict program.
The parse programs use the normal strparser semantics. The verdict
program is of type SK_SKB.
The verdict program returns a verdict SK_DROP, or SK_REDIRECT for
now. Additional actions may be added later. When SK_REDIRECT is
returned, expected when bpf program uses bpf_sk_redirect_map(), the
sockmap logic will consult per cpu variables set by the helper routine
and pull the sock entry out of the sock map. This pattern follows the
existing redirect logic in cls and xdp programs.
This gives the flow,
recv_sock -> str_parser (parse_prog) -> verdict_prog -> skb_send_sock
\
-> kfree_skb
As an example use case a message based load balancer may use specific
logic in the verdict program to select the sock to send on.
Sample programs are provided in future patches that hopefully illustrate
the user interfaces. Also selftests are in follow-on patches.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
State of a register doesn't matter if it wasn't read in reaching an exit;
a write screens off all reads downstream of it from all explored_states
upstream of it.
This allows us to prune many more branches; here are some processed insn
counts for some Cilium programs:
Program before after
bpf_lb_opt_-DLB_L3.o 6515 3361
bpf_lb_opt_-DLB_L4.o 8976 5176
bpf_lb_opt_-DUNKNOWN.o 2960 1137
bpf_lxc_opt_-DDROP_ALL.o 95412 48537
bpf_lxc_opt_-DUNKNOWN.o 141706 78718
bpf_netdev.o 24251 17995
bpf_overlay.o 10999 9385
The runtime is also improved; here are 'time' results in ms:
Program before after
bpf_lb_opt_-DLB_L3.o 24 6
bpf_lb_opt_-DLB_L4.o 26 11
bpf_lb_opt_-DUNKNOWN.o 11 2
bpf_lxc_opt_-DDROP_ALL.o 1288 139
bpf_lxc_opt_-DUNKNOWN.o 1768 234
bpf_netdev.o 62 31
bpf_overlay.o 15 13
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable the newly added jump opcodes, main parts are in two
different areas, namely direct packet access and dynamic map
value access. For the direct packet access, we now allow for
the following two new patterns to match in order to trigger
markings with find_good_pkt_pointers():
Variant 1 (access ok when taking the branch):
0: (61) r2 = *(u32 *)(r1 +76)
1: (61) r3 = *(u32 *)(r1 +80)
2: (bf) r0 = r2
3: (07) r0 += 8
4: (ad) if r0 < r3 goto pc+2
R0=pkt(id=0,off=8,r=0) R1=ctx R2=pkt(id=0,off=0,r=0)
R3=pkt_end R10=fp
5: (b7) r0 = 0
6: (95) exit
from 4 to 7: R0=pkt(id=0,off=8,r=8) R1=ctx
R2=pkt(id=0,off=0,r=8) R3=pkt_end R10=fp
7: (71) r0 |
