summaryrefslogtreecommitdiffstats
path: root/kernel/audit.c
AgeCommit message (Collapse)Author
2014-01-17audit: fix location of __net_initdata for audit_net_opsRichard Guy Briggs
Fixup caught by checkpatch. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-17audit: remove pr_info for every network namespaceEric Paris
A message about creating the audit socket might be fine at startup, but a pr_info for every single network namespace created on a system isn't useful. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-14audit: Convert int limit uses to u32Joe Perches
The equivalent uapi struct uses __u32 so make the kernel uses u32 too. This can prevent some oddities where the limit is logged/emitted as a negative value. Convert kstrtol to kstrtouint to disallow negative values. Signed-off-by: Joe Perches <joe@perches.com> [eparis: do not remove static from audit_default declaration]
2014-01-14audit: Use more current logging styleJoe Perches
Add pr_fmt to prefix "audit: " to output Convert printk(KERN_<LEVEL> to pr_<level> Coalesce formats Use pr_cont Move a brace after switch Signed-off-by: Joe Perches <joe@perches.com>
2014-01-14audit: Use hex_byte_pack_upperJoe Perches
Using the generic kernel function causes the object size to increase with gcc 4.8.1. $ size kernel/audit.o* text data bss dec hex filename 18577 6079 8436 33092 8144 kernel/audit.o.new 18579 6015 8420 33014 80f6 kernel/audit.o.old Unsigned...
2014-01-13audit: reorder AUDIT_TTY_SET argumentsEric Paris
An admin is likely to want to see old and new values next to each other. Putting all of the old values followed by all of the new values is just hard to read as a human. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: rework AUDIT_TTY_SET to only grab spin_lock onceEric Paris
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one time. We need to determine if the new values are valid and if so, set the new values at the same time we grab the old onces. While we are here get rid of 'res' and just use err. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: remove needless switch in AUDIT_SETEric Paris
If userspace specified that it was setting values via the mask we do not need a second check to see if they also set the version field high enough to understand those values. (clearly if they set the mask they knew those values). Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: use define's for audit versionEric Paris
Give names to the audit versions. Just something for a userspace programmer to know what the version provides. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: wait_for_auditd rework for readabilityEric Paris
We had some craziness with signed to unsigned long casting which appears wholely unnecessary. Just use signed long. Even though 2 values of the math equation are unsigned longs the result is expected to be a signed long. So why keep casting the result to signed long? Just make it signed long and use it. We also remove the needless "timeout" variable. We already have the stack "sleep_time" variable. Just use that... Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: log task info on feature changeRichard Guy Briggs
Add task information to the log when changing a feature state. Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: fix incorrect set of audit_sockGao feng
NETLINK_CB(skb).sk is the socket of user space process, netlink_unicast in kauditd_send_skb wants the kernel side socket. Since the sk_state of audit netlink socket is not NETLINK_CONNECTED, so the netlink_getsockbyportid doesn't return -ECONNREFUSED. And the socket of userspace process can be released anytime, so the audit_sock may point to invalid socket. this patch sets the audit_sock to the kernel side audit netlink socket. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: print error message when fail to create audit socketGao feng
print the error message and then return -ENOMEM. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: log on errors from filter user rulesRichard Guy Briggs
An error on an AUDIT_NEVER rule disabled logging on that rule. On error on AUDIT_NEVER rules, log. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: audit_log_start running on auditd should not stopToshiyuki Okajima
The backlog cannot be consumed when audit_log_start is running on auditd even if audit_log_start calls wait_for_auditd to consume it. The situation is the deadlock because only auditd can consume the backlog. If the other process needs to send the backlog, it can be also stopped by the deadlock. So, audit_log_start running on auditd should not stop. You can see the deadlock with the following reproducer: # auditctl -a exit,always -S all # reboot Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com> Reviewed-by: gaofeng@cn.fujitsu.com Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: drop audit_cmd_lock in AUDIT_USER family of casesRichard Guy Briggs
We do not need to hold the audit_cmd_mutex for this family of cases. The possible exception to this is the call to audit_filter_user(), so drop the lock immediately after. To help in fixing the race we are trying to avoid, make sure that nothing called by audit_filter_user() calls audit_log_start(). In particular, watch out for *_audit_rule_match(). This fix will take care of systemd and anything USING audit. It still means that we could race with something configuring audit and auditd shutting down. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Reported-by: toshi.okajima@jp.fujitsu.com Tested-by: toshi.okajima@jp.fujitsu.com Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: convert all sessionid declaration to unsigned intEric Paris
Right now the sessionid value in the kernel is a combination of u32, int, and unsigned int. Just use unsigned int throughout. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: Added exe field to audit core dump signal logPaul Davies C
Currently when the coredump signals are logged by the audit system, the actual path to the executable is not logged. Without details of exe, the system admin may not have an exact idea on what program failed. This patch changes the audit_log_task() so that the path to the exe is also logged. This was copied from audit_log_task_info() and the latter enhanced to avoid disappearing text fields. Signed-off-by: Paul Davies C <pauldaviesc@gmail.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: prevent an older auditd shutdown from orphaning a newer auditd startupRichard Guy Briggs
There have been reports of auditd restarts resulting in kaudit not being able to find a newly registered auditd. It results in reports such as: kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614 kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320 kernel: [ 2077.234718] audit: auditd disappeared (previously mis-spelled "dissapeared") One possible cause is a race between the shutdown of an older auditd and a newer one. If the newer one sets the daemon pid to itself in kauditd before the older one has cleared the daemon pid, the newer daemon pid will be erased. This could be caused by an automated system, or by manual intervention, but in either case, there is no use in having the older daemon clear the daemon pid reference since its old pid is no longer being referenced. This patch will prevent that specific case, returning an error of EACCES. The case for preventing a newer auditd from registering itself if there is an existing auditd is a more difficult case that is beyond the scope of this patch. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: refactor audit_receive_msg() to clarify AUDIT_*_RULE* casesRichard Guy Briggs
audit_receive_msg() needlessly contained a fallthrough case that called audit_receive_filter(), containing no common code between the cases. Separate them to make the logic clearer. Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE, AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send() functions. This should not functionally change the logic. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: log AUDIT_TTY_SET config changesRichard Guy Briggs
Log transition of config changes when AUDIT_TTY_SET is called, including both enabled and log_passwd values now in the struct. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: get rid of *NO* daemon at audit_pid=0 messageRichard Guy Briggs
kauditd_send_skb is called after audit_pid was checked to be non-zero. However, it can be set to 0 due to auditd exiting while kauditd_send_skb is still executed and this can result in a spurious warning about missing auditd. Re-check audit_pid before printing the message. Signed-off-by: Mateusz Guzik <mguzik@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: linux-kernel@vger.kernel.org Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: allow unlimited backlog queueRichard Guy Briggs
Since audit can already be disabled by "audit=0" on the kernel boot line, or by the command "auditctl -e 0", it would be more useful to have the audit_backlog_limit set to zero mean effectively unlimited (limited only by system RAM). Acked-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: use old_lock in audit_set_featureGao feng
we already have old_lock, no need to calculate it again. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: don't generate audit feature changed log when audit disabledGao feng
If audit is disabled,we shouldn't generate the audit log. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: fix incorrect order of log new and old featureGao feng
The order of new feature and old feature is incorrect, this patch fix it. Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: remove useless code in audit_enableGao feng
Since kernel parameter is operated before initcall, so the audit_initialized must be AUDIT_UNINITIALIZED or DISABLED in audit_enable. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: add audit_backlog_wait_time configuration optionRichard Guy Briggs
reaahead-collector abuses the audit logging facility to discover which files are accessed at boot time to make a pre-load list Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up, or gets blocked, the callers won't be blocked. Bump audit_status API version to "2". Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: clean up AUDIT_GET/SET local variables and future-proof APIRichard Guy Briggs
Re-named confusing local variable names (status_set and status_get didn't agree with their command type name) and reduced their scope. Future-proof API changes by not depending on the exact size of the audit_status struct and by adding an API version field. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: add kernel set-up parameter to override default backlog limitRichard Guy Briggs
The default audit_backlog_limit is 64. This was a reasonable limit at one time. systemd causes so much audit queue activity on startup that auditd doesn't start before the backlog queue has already overflowed by more than a factor of 2. On a system with audit= not set on the kernel command line, this isn't an issue since that history isn't kept for auditd when it is available. On a system with audit=1 set on the kernel command line, kaudit tries to keep that history until auditd is able to drain the queue. This default can be changed by the "-b" option in audit.rules once the system has booted, but won't help with lost messages on boot. One way to solve this would be to increase the default backlog queue size to avoid losing any messages before auditd is able to consume them. This would be overkill to the embedded community and insufficient for some servers. Another way to solve it might be to add a kconfig option to set the default based on the system type. An embedded system would get the current (or smaller) default, while Workstations might get more than now and servers might get more. None of these solutions helps if a system's compiled default is too small to see the lost messages without compiling a new kernel. This patch adds a kernel set-up parameter (audit already has one to enable/disable it) "audit_backlog_limit=<n>" that overrides the default to allow the system administrator to set the backlog limit. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: efficiency fix 2: request exclusive wait since all need same resourceDan Duval
These and similar errors were seen on a patched 3.8 kernel when the audit subsystem was overrun during boot: udevd[876]: worker [887] unexpectedly returned with status 0x0100 udevd[876]: worker [887] failed while handling '/devices/pci0000:00/0000:00:03.0/0000:40:00.0' udevd[876]: worker [880] unexpectedly returned with status 0x0100 udevd[876]: worker [880] failed while handling '/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1' udevadm settle - timeout of 180 seconds reached, the event queue contains: /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995) /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034) audit: audit_backlog=258 > audit_backlog_limit=256 audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256 The change below increases the efficiency of the audit code and prevents it from being overrun: Use add_wait_queue_exclusive() in wait_for_auditd() to put the thread on the wait queue. When kauditd dequeues an skb, all of the waiting threads are waiting for the same resource, but only one is going to get it, so there's no need to wake up more than one waiter. See: https://lkml.org/lkml/2013/9/2/479 Signed-off-by: Dan Duval <dan.duval@oracle.com> Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: efficiency fix 1: only wake up if queue shorter than backlog limitDan Duval
These and similar errors were seen on a patched 3.8 kernel when the audit subsystem was overrun during boot: udevd[876]: worker [887] unexpectedly returned with status 0x0100 udevd[876]: worker [887] failed while handling '/devices/pci0000:00/0000:00:03.0/0000:40:00.0' udevd[876]: worker [880] unexpectedly returned with status 0x0100 udevd[876]: worker [880] failed while handling '/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1' udevadm settle - timeout of 180 seconds reached, the event queue contains: /sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995) /sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034) audit: audit_backlog=258 > audit_backlog_limit=256 audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256 The change below increases the efficiency of the audit code and prevents it from being overrun: Only issue a wake_up in kauditd if the length of the skb queue is less than the backlog limit. Otherwise, threads waiting in wait_for_auditd() will simply wake up, discover that the queue is still too long for them to proceed, and go back to sleep. This results in wasted context switches and machine cycles. kauditd_thread() is the only function that removes buffers from audit_skb_queue so we can't race. If we did, the timeout in wait_for_auditd() would expire and the waiting thread would continue. See: https://lkml.org/lkml/2013/9/2/479 Signed-off-by: Dan Duval <dan.duval@oracle.com> Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: make use of remaining sleep time from wait_for_auditdRichard Guy Briggs
If wait_for_auditd() times out, go immediately to the error function rather than retesting the loop conditions. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: reset audit backlog wait time after error recoveryRichard Guy Briggs
When the audit queue overflows and times out (audit_backlog_wait_time), the audit queue overflow timeout is set to zero. Once the audit queue overflow timeout condition recovers, the timeout should be reset to the original value. See also: https://lkml.org/lkml/2013/9/2/473 Cc: stable@vger.kernel.org # v3.8-rc4+ Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Dan Duval <dan.duval@oracle.com> Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: listen in all network namespacesRichard Guy Briggs
Convert audit from only listening in init_net to use register_pernet_subsys() to dynamically manage the netlink socket list. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: restore order of tty and ses fields in log outputRichard Guy Briggs
When being refactored from audit_log_start() to audit_log_task_info(), in commit e23eb920 the tty and ses fields in the log output got transposed. Restore to original order to avoid breaking search tools. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2014-01-13audit: fix netlink portid naming and typesRichard Guy Briggs
Normally, netlink ports use the PID of the userspace process as the port ID. If the PID is already in use by a port, the kernel will allocate another port ID to avoid conflict. Re-name all references to netlink ports from pid to portid to reflect this reality and avoid confusion with actual PIDs. Ports use the __u32 type, so re-type all portids accordingly. (This patch is very similar to ebiederman's 5deadd69) Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-22Merge tag 'v3.12'Eric Paris
Linux 3.12 Conflicts: fs/exec.c
2013-11-05audit: log the audit_names record typeJeff Layton
...to make it clear what the intent behind each record's operation was. In many cases you can infer this, based on the context of the syscall and the result. In other cases it's not so obvious. For instance, in the case where you have a file being renamed over another, you'll have two different records with the same filename but different inode info. By logging this information we can clearly tell which one was created and which was deleted. This fixes what was broken in commit bfcec708. Commit 79f6530c should also be backported to stable v3.7+. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: use given values in tty_audit enable apiRichard Guy Briggs
In send/GET, we don't want the kernel to lie about what value is set. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: use nlmsg_len() to get message payload lengthMathias Krause
Using the nlmsg_len member of the netlink header to test if the message is valid is wrong as it includes the size of the netlink header itself. Thereby allowing to send short netlink messages that pass those checks. Use nlmsg_len() instead to test for the right message length. The result of nlmsg_len() is guaranteed to be non-negative as the netlink message already passed the checks of nlmsg_ok(). Also switch to min_t() to please checkpatch.pl. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: stable@vger.kernel.org # v2.6.6+ for the 1st hunk, v2.6.23+ for the 2nd Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: use memset instead of trying to initialize field by fieldEric Paris
We currently are setting fields to 0 to initialize the structure declared on the stack. This is a bad idea as if the structure has holes or unpacked space these will not be initialized. Just use memset. This is not a performance critical section of code. Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: fix info leak in AUDIT_GET requestsMathias Krause
We leak 4 bytes of kernel stack in response to an AUDIT_GET request as we miss to initialize the mask member of status_set. Fix that. Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: stable@vger.kernel.org # v2.6.6+ Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: audit feature to set loginuid immutableEric Paris
This adds a new 'audit_feature' bit which allows userspace to set it such that the loginuid is absolutely immutable, even if you have CAP_AUDIT_CONTROL. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: audit feature to only allow unsetting the loginuidEric Paris
This is a new audit feature which only grants processes with CAP_AUDIT_CONTROL the ability to unset their loginuid. They cannot directly set it from a valid uid to another valid uid. The ability to unset the loginuid is nice because a priviledged task, like that of container creation, can unset the loginuid and then priv is not needed inside the container when a login daemon needs to set the loginuid. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: implement generic feature setting and retrievingEric Paris
The audit_status structure was not designed with extensibility in mind. Define a new AUDIT_SET_FEATURE message type which takes a new structure of bits where things can be enabled/disabled/locked one at a time. This structure should be able to grow in the future while maintaining forward and backward compatibility (based loosly on the ideas from capabilities and prctl) This does not actually add any features, but is just infrastructure to allow new on/off types of audit system features. Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: printk USER_AVC messages when audit isn't enabledTyler Hicks
When the audit=1 kernel parameter is absent and auditd is not running, AUDIT_USER_AVC messages are being silently discarded. AUDIT_USER_AVC messages should be sent to userspace using printk(), as mentioned in the commit message of 4a4cd633 ("AUDIT: Optimise the audit-disabled case for discarding user messages"). When audit_enabled is 0, audit_receive_msg() discards all user messages except for AUDIT_USER_AVC messages. However, audit_log_common_recv_msg() refuses to allocate an audit_buffer if audit_enabled is 0. The fix is to special case AUDIT_USER_AVC messages in both functions. It looks like commit 50397bd1 ("[AUDIT] clean up audit_receive_msg()") introduced this bug. Cc: <stable@kernel.org> # v2.6.25+ Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Paris <eparis@redhat.com> Cc: linux-audit@redhat.com Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05Audit: remove duplicate commentsGao feng
Remove it. Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: remove newline accidentally added during session id helper refactorRichard Guy Briggs
A newline was accidentally added during session ID helper refactorization in commit 4d3fb709. This needlessly uses up buffer space, messes up syslog formatting and makes userspace processing less efficient. Remove it. Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>
2013-11-05audit: remove duplicate inclusion of the netlink headerIlya V. Matveychikov
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com> Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Eric Paris <eparis@redhat.com>