Age | Commit message (Collapse) | Author |
|
xen_biovec_phys_mergeable() only needs .bv_page of the 2nd bio bvec
for checking if the two bvecs can be merged, so pass page to
xen_biovec_phys_mergeable() directly.
No function change.
Cc: ris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: xen-devel@lists.xenproject.org
Cc: Omar Sandoval <osandov@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't allow memory to be added above the allowed maximum allocation
limit set by Xen.
Trying to do so would result in cases like the following:
[ 584.559652] ------------[ cut here ]------------
[ 584.564897] WARNING: CPU: 2 PID: 1 at ../arch/x86/xen/multicalls.c:129 xen_alloc_pte+0x1c7/0x390()
[ 584.575151] Modules linked in:
[ 584.578643] Supported: Yes
[ 584.581750] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 4.4.120-92.70-default #1
[ 584.590000] Hardware name: Cisco Systems Inc UCSC-C460-M4/UCSC-C460-M4, BIOS C460M4.4.0.1b.0.0629181419 06/29/2018
[ 584.601862] 0000000000000000 ffffffff813175a0 0000000000000000 ffffffff8184777c
[ 584.610200] ffffffff8107f4e1 ffff880487eb7000 ffff8801862b79c0 ffff88048608d290
[ 584.618537] 0000000000487eb7 ffffea0000000201 ffffffff81009de7 ffffffff81068561
[ 584.626876] Call Trace:
[ 584.629699] [<ffffffff81019ad9>] dump_trace+0x59/0x340
[ 584.635645] [<ffffffff81019eaa>] show_stack_log_lvl+0xea/0x170
[ 584.642391] [<ffffffff8101ac51>] show_stack+0x21/0x40
[ 584.648238] [<ffffffff813175a0>] dump_stack+0x5c/0x7c
[ 584.654085] [<ffffffff8107f4e1>] warn_slowpath_common+0x81/0xb0
[ 584.660932] [<ffffffff81009de7>] xen_alloc_pte+0x1c7/0x390
[ 584.667289] [<ffffffff810647f0>] pmd_populate_kernel.constprop.6+0x40/0x80
[ 584.675241] [<ffffffff815ecfe8>] phys_pmd_init+0x210/0x255
[ 584.681587] [<ffffffff815ed207>] phys_pud_init+0x1da/0x247
[ 584.687931] [<ffffffff815edb3b>] kernel_physical_mapping_init+0xf5/0x1d4
[ 584.695682] [<ffffffff815e9bdd>] init_memory_mapping+0x18d/0x380
[ 584.702631] [<ffffffff81064699>] arch_add_memory+0x59/0xf0
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Xen-swiotlb hooks into the arm/arm64 arch code through a copy of the DMA
DMA mapping operations stored in the struct device arch data.
Switching arm64 to use the direct calls for the merged DMA direct /
swiotlb code broke this scheme. Replace the indirect calls with
direct-calls in xen-swiotlb as well to fix this problem.
Fixes: 356da6d0cde3 ("dma-mapping: bypass indirect calls for dma-direct")
Reported-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
based frontends. Currently the frontends which implement
similar code for sharing big buffers between frontend and
backend are para-virtualized DRM and sound drivers.
Both define the same way to share grant references of a
data buffer with the corresponding backend with little
differences.
Move shared code into a helper module, so there is a single
implementation of the same functionality for all.
This patch introduces code which is used by sound and display
frontend drivers without functional changes with the intention
to remove shared code from the corresponding drivers.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The start info structure that is defined as part of the x86/HVM direct boot
ABI and used for starting Xen PVH guests would be more versatile if it also
included a way to pass information about the memory map to the guest. This
would allow KVM guests to share the same entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
We need to refactor PVH entry code so that support for other hypervisors
like Qemu/KVM can be added more easily.
This patch moves the small block of code used for initializing Xen PVH
virtual machines into the Xen specific file. This initialization is not
going to be needed for Qemu/KVM guests. Moving it out of the common file
is going to allow us to compile kernels in the future without CONFIG_XEN
that are still capable of being booted as a Qemu/KVM guest via the PVH
entry point.
Signed-off-by: Maran Wilson <maran.wilson@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.
That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.
The original issue that commit has tried to workaround fa564ad96366
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
xen_create_contiguous_region has now only an implementation if
CONFIG_XEN_PV is defined. However, on ARM we never set CONFIG_XEN_PV but
we do have an implementation of xen_create_contiguous_region which is
required for swiotlb-xen to work correctly (although it just sets
*dma_handle).
Cc: <stable@vger.kernel.org> # 4.12
Fixes: 16624390816c ("xen: create xen_create/destroy_contiguous_region() stubs for PVHVM only builds")
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Jeff.Kubascik@dornerworks.com
CC: Jarvis.Roach@dornerworks.com
CC: Nathan.Studer@dornerworks.com
CC: vkuznets@redhat.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
CC: julien.grall@arm.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 paravirt updates from Ingo Molnar:
"Two main changes:
- Remove no longer used parts of the paravirt infrastructure and put
large quantities of paravirt ops under a new config option
PARAVIRT_XXL=y, which is selected by XEN_PV only. (Joergen Gross)
- Enable PV spinlocks on Hyperv (Yi Sun)"
* 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Enable PV qspinlock for Hyper-V
x86/hyperv: Add GUEST_IDLE_MSR support
x86/paravirt: Clean up native_patch()
x86/paravirt: Prevent redefinition of SAVE_FLAGS macro
x86/xen: Make xen_reservation_lock static
x86/paravirt: Remove unneeded mmu related paravirt ops bits
x86/paravirt: Move the Xen-only pv_mmu_ops under the PARAVIRT_XXL umbrella
x86/paravirt: Move the pv_irq_ops under the PARAVIRT_XXL umbrella
x86/paravirt: Move the Xen-only pv_cpu_ops under the PARAVIRT_XXL umbrella
x86/paravirt: Move items in pv_info under PARAVIRT_XXL umbrella
x86/paravirt: Introduce new config option PARAVIRT_XXL
x86/paravirt: Remove unused paravirt bits
x86/paravirt: Use a single ops structure
x86/paravirt: Remove clobbers from struct paravirt_patch_site
x86/paravirt: Remove clobbers parameter from paravirt patch functions
x86/paravirt: Make paravirt_patch_call() and paravirt_patch_jmp() static
x86/xen: Add SPDX identifier in arch/x86/xen files
x86/xen: Link platform-pci-unplug.o only if CONFIG_XEN_PVHVM
x86/xen: Move pv specific parts of arch/x86/xen/mmu.c to mmu_pv.c
x86/xen: Move pv irq related functions under CONFIG_XEN_PV umbrella
|
|
Merge -rc6 in, for two reasons:
1) Resolve a trivial conflict in the blk-mq-tag.c documentation
2) A few important regression fixes went into upstream directly, so
they aren't in the 4.20 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v4.19-rc6': (780 commits)
Linux 4.19-rc6
MAINTAINERS: fix reference to moved drivers/{misc => auxdisplay}/panel.c
cpufreq: qcom-kryo: Fix section annotations
perf/core: Add sanity check to deal with pinned event failure
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
selftests/powerpc: Fix Makefiles for headers_install change
blk-mq: I/O and timer unplugs are inverted in blktrace
dax: Fix deadlock in dax_lock_mapping_entry()
x86/boot: Fix kexec booting failure in the SEV bit detection code
bcache: add separate workqueue for journal_write to avoid deadlock
drm/amd/display: Fix Edid emulation for linux
drm/amd/display: Fix Vega10 lightup on S3 resume
drm/amdgpu: Fix vce work queue was not cancelled when suspend
Revert "drm/panel: Add device_link from panel device to DRM device"
xen/blkfront: When purging persistent grants, keep them in the buffer
clocksource/drivers/timer-atmel-pit: Properly handle error cases
block: fix deadline elevator drain for zoned block devices
ACPI / hotplug / PCI: Don't scan for non-hotplug bridges if slot is not bridge
drm/syncobj: Don't leak fences when WAIT_FOR_SUBMIT is set
...
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Having multiple externs in arch headers is not a good way to provide
a common interface.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Scrubbing pages on initial balloon down can take some time, especially
in nested virtualization case (nested EPT is slow). When HVM/PVH guest is
started with memory= significantly lower than maxmem=, all the extra
pages will be scrubbed before returning to Xen. But since most of them
weren't used at all at that point, Xen needs to populate them first
(from populate-on-demand pool). In nested virt case (Xen inside KVM)
this slows down the guest boot by 15-30s with just 1.5GB needed to be
returned to Xen.
Add runtime parameter to enable/disable it, to allow initially disabling
scrubbing, then enable it back during boot (for example in initramfs).
Such usage relies on assumption that a) most pages ballooned out during
initial boot weren't used at all, and b) even if they were, very few
secrets are in the guest at that time (before any serious userspace
kicks in).
Convert CONFIG_XEN_SCRUB_PAGES to CONFIG_XEN_SCRUB_PAGES_DEFAULT (also
enabled by default), controlling default value for the new runtime
switch.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
There are some PV specific functions in arch/x86/xen/mmu.c which can be
moved to mmu_pv.c. This in turn enables to build multicalls.c dependent
on CONFIG_XEN_PV.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel@lists.xenproject.org
Cc: virtualization@lists.linux-foundation.org
Cc: akataria@vmware.com
Cc: rusty@rustcorp.com.au
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180828074026.820-3-jgross@suse.com
|
|
All functions in arch/x86/xen/irq.c and arch/x86/xen/xen-asm*.S are
specific to PV guests. Include them in the kernel with CONFIG_XEN_PV only.
Make the PV specific code in arch/x86/entry/entry_*.S dependent on
CONFIG_XEN_PV instead of CONFIG_XEN.
The HVM specific code should depend on CONFIG_XEN_PVHVM.
While at it reformat the Makefile to make it more readable.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: virtualization@lists.linux-foundation.org
Cc: akataria@vmware.com
Cc: rusty@rustcorp.com.au
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20180828074026.820-2-jgross@suse.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for Rohm BU21029 touch controller
- new bitmap APIs: bitmap_alloc, bitmap_zalloc and bitmap_free
- updates to Atmel, eeti. pxrc and iforce drivers
- assorted driver cleanups and fixes.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
MAINTAINERS: Add PhoenixRC Flight Controller Adapter
Input: do not use WARN() in input_alloc_absinfo()
Input: mark expected switch fall-throughs
Input: raydium_i2c_ts - use true and false for boolean values
Input: evdev - switch to bitmap API
Input: gpio-keys - switch to bitmap_zalloc()
Input: elan_i2c_smbus - cast sizeof to int for comparison
bitmap: Add bitmap_alloc(), bitmap_zalloc() and bitmap_free()
md: Avoid namespace collision with bitmap API
dm: Avoid namespace collision with bitmap API
Input: pm8941-pwrkey - add resin entry
Input: pm8941-pwrkey - abstract register offsets and event code
Input: iforce - reorganize joystick configuration lists
Input: atmel_mxt_ts - move completion to after config crc is updated
Input: atmel_mxt_ts - don't report zero pressure from T9
Input: atmel_mxt_ts - zero terminate config firmware file
Input: atmel_mxt_ts - refactor config update code to add context struct
Input: atmel_mxt_ts - config CRC may start at T71
Input: atmel_mxt_ts - remove unnecessary debug on ENOMEM
Input: atmel_mxt_ts - remove duplicate setup of ABS_MT_PRESSURE
...
|
|
Extend grant table module API to allow allocating buffers that can
be used for DMA operations and mapping foreign grant references
on top of those.
The resulting buffer is similar to the one allocated by the balloon
driver in that proper memory reservation is made by
({increase|decrease}_reservation and VA mappings are updated if
needed).
This is useful for sharing foreign buffers with HW drivers which
cannot work with scattered buffers provided by the balloon driver,
but require DMAable memory instead.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Memory {increase|decrease}_reservation and VA mappings update/reset
code used in balloon driver can be made common, so other drivers can
also re-use the same functionality without open-coding.
Create a dedicated file for the shared code and export corresponding
symbols for other kernel modules.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Make set/clear page private code shared and accessible to
other kernel modules which can re-use these instead of open-coding.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains the following fixes/cleanups:
- the removal of a BUG_ON() which wasn't necessary and which could
trigger now due to a recent change
- a correction of a long standing bug happening very rarely in Xen
dom0 when a hypercall buffer from user land was not accessible by
the hypervisor for very short periods of time due to e.g. page
migration or compaction
- usage of EXPORT_SYMBOL_GPL() instead of EXPORT_SYMBOL() in a
Xen-related driver (no breakage possible as using those symbols
without others already exported via EXPORT-SYMBOL_GPL() wouldn't
make any sense)
- a simplification for Xen PVH or Xen ARM guests
- some additional error handling for callers of xenbus_printf()"
* tag 'for-linus-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Remove unnecessary BUG_ON from __unbind_from_irq()
xen: add new hypercall buffer mapping device
xen/scsiback: add error handling for xenbus_printf
scsi: xen-scsifront: add error handling for xenbus_printf
xen/grant-table: Export gnttab_{alloc|free}_pages as GPL
xen: add error handling for xenbus_printf
xen: share start flags between PV and PVH
|
|
Use a global variable to store the start flags for both PV and PVH.
This allows the xen_initial_domain macro to work properly on PVH.
Note that ARM is also switched to use the new variable.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
As we move stuff around, some doc references are broken. Fix some of
them via this script:
./scripts/documentation-file-ref-check --fix
Manually checked if the produced result is valid, removing a few
false-positives.
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Coly Li <colyli@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: Jonathan Corbet <corbet@lwn.net>
|
|
This is the sync up with the canonical definitions of the input,
sound and display protocols in Xen.
Changes to kbdif:
1. Add missing string constants for {feature|request}-raw-pointer
to align with the rest of the interface file.
2. Add new XenStore feature fields, so it is possible to individually
control set of exposed virtual devices for each guest OS:
- set feature-disable-keyboard to 1 if no keyboard device needs
to be created
- set feature-disable-pointer to 1 if no pointer device needs
to be created
3. Move multi-touch device parameters to backend nodes: these are
described as a part of frontend's XenBus configuration nodes
while they belong to backend's configuration. Fix this by moving
the parameters to the proper section.
Unique-id field:
1. Add unique-id XenBus entry for virtual input and display.
2. Change type of unique-id field to string for sndif to align with
display and input protocols.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
My recent Xen patch series introduces a new HYPERVISOR_memory_op to
support direct priv-mapping of certain guest resources (such as ioreq
pages, used by emulators) by a tools domain, rather than having to access
such resources via the guest P2M.
This patch adds the necessary infrastructure to the privcmd driver and
Xen MMU code to support direct resource mapping.
NOTE: The adjustment in the MMU code is partially cosmetic. Xen will now
allow a PV tools domain to map guest pages either by GFN or MFN, thus
the term 'mfn' has been swapped for 'pfn' in the lower layers of the
remap code.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This is the sync up with the canonical definition of the sound
protocol in Xen:
1. Protocol version was referenced in the protocol description,
but missed its definition. Fixed by adding a constant
for current protocol version.
2. Some of the request descriptions have "reserved" fields
missed: fixed by adding corresponding entries.
3. Extend the size of the requests and responses to 64 octets.
Bump protocol version to 2.
4. Add explicit back and front synchronization
In order to provide explicit synchronization between backend and
frontend the following changes are introduced in the protocol:
- add new ring buffer for sending asynchronous events from
backend to frontend to report number of bytes played by the
frontend (XENSND_EVT_CUR_POS)
- introduce trigger events for playback control: start/stop/pause/resume
- add "req-" prefix to event-channel and ring-ref to unify naming
of the Xen event channels for requests and events
5. Add explicit back and front parameter negotiation
In order to provide explicit stream parameter negotiation between
backend and frontend the following changes are introduced in the protocol:
add XENSND_OP_HW_PARAM_QUERY request to read/update
configuration space for the parameters given: request passes
desired parameter's intervals/masks and the response to this request
returns allowed min/max intervals/masks to be used.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Pre-4.17 kernels ignored start_info's rsdp_paddr pointer and instead
relied on finding RSDP in standard location in BIOS RO memory. This
has worked since that's where Xen used to place it.
However, with recent Xen change (commit 4a5733771e6f ("libxl: put RSDP
for PVH guest near 4GB")) it prefers to keep RSDP at a "non-standard"
address. Even though as of commit b17d9d1df3c3 ("x86/xen: Add pvh
specific rsdp address retrieval function") Linux is able to find RSDP,
for back-compatibility reasons we need to indicate to Xen that we can
handle this, an we do so by setting XENFEAT_linux_rsdp_unrestricted
flag in ELF notes.
(Also take this opportunity and sync features.h header file with Xen)
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"This contains two fixes for running under Xen:
- a fix avoiding resource conflicts between adding mmio areas and
memory hotplug
- a fix setting NX bits in page table entries copied from Xen when
running a PV guest"
* tag 'for-linus-4.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/balloon: Mark unallocated host memory as UNUSABLE
x86-64/Xen: eliminate W+X mappings
|
|
Commit f5775e0b6116 ("x86/xen: discard RAM regions above the maximum
reservation") left host memory not assigned to dom0 as available for
memory hotplug.
Unfortunately this also meant that those regions could be used by
others. Specifically, commit fa564ad96366 ("x86/PCI: Enable a 64bit BAR
on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") may try to map those
addresses as MMIO.
To prevent this mark unallocated host memory as E820_TYPE_UNUSABLE (thus
effectively reverting f5775e0b6116) and keep track of that region as
a hostmem resource that can be used for the hotplug.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
"Xen features and fixes for v4.15-rc1
Apart from several small fixes it contains the following features:
- a series by Joao Martins to add vdso support of the pv clock
interface
- a series by Juergen Gross to add support for Xen pv guests to be
able to run on 5 level paging hosts
- a series by Stefano Stabellini adding the Xen pvcalls frontend
driver using a paravirtualized socket interface"
* tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits)
xen/pvcalls: fix potential endless loop in pvcalls-front.c
xen/pvcalls: Add MODULE_LICENSE()
MAINTAINERS: xen, kvm: track pvclock-abi.h changes
x86/xen/time: setup vcpu 0 time info page
x86/xen/time: set pvclock flags on xen_time_init()
x86/pvclock: add setter for pvclock_pvti_cpu0_va
ptp_kvm: probe for kvm guest availability
xen/privcmd: remove unused variable pageidx
xen: select grant interface version
xen: update arch/x86/include/asm/xen/cpuid.h
xen: add grant interface version dependent constants to gnttab_ops
xen: limit grant v2 interface to the v1 functionality
xen: re-introduce support for grant v2 interface
xen: support priv-mapping in an HVM tools domain
xen/pvcalls: remove redundant check for irq >= 0
xen/pvcalls: fix unsigned less than zero error check
xen/time: Return -ENODEV from xen_get_wallclock()
xen/pvcalls-front: mark expected switch fall-through
xen: xenbus_probe_frontend: mark expected switch fall-throughs
xen/time: do not decrease steal time after live migration on xen
...
|
|
In order to support pvclock vdso on xen we need to setup the time
info page for vcpu 0 and register the page with Xen using the
VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall
will also forcefully update the pvti which will set some of the
necessary flags for vdso. Afterwards we check if it supports the
PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having
vdso/vsyscall support. And if so, it will set the cpu 0 pvti that
will be later on used when mapping the vdso image.
The xen headers are also updated to include the new hypercall for
registering the secondary vcpu_time_info struct.
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
As there is currently no user for sub-page grants or transient grants
remove that functionality. This at once makes it possible to switch
from grant v2 to grant v1 without restrictions, as there is no loss of
functionality other than the limited frame number width related to
the switch.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The grant v2 support was removed from the kernel with
commit 438b33c7145ca8a5131a30c36d8f59bce119a19a ("xen/grant-table:
remove support for V2 tables") as the higher memory footprint of v2
grants resulted in less grants being possible for a kernel compared
to the v1 grant interface.
As machines with more than 16TB of memory are expected to be more
common in the near future support of grant v2 is mandatory in order
to be able to run a Xen pv domain at any memory location.
So re-add grant v2 support basically by reverting above commit.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
If the domain has XENFEAT_auto_translated_physmap then use of the PV-
specific HYPERVISOR_mmu_update hypercall is clearly incorrect.
This patch adds checks in xen_remap_domain_gfn_array() and
xen_unmap_domain_gfn_array() which call through to the approprate
xlate_mmu function if the feature is present. A check is also added
to xen_remap_domain_gfn_range() to fail with -EOPNOTSUPP since this
should not be used in an HVM tools domain.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
After guest live migration on xen, steal time in /proc/stat
(cpustat[CPUTIME_STEAL]) might decrease because steal returned by
xen_steal_lock() might be less than this_rq()->prev_steal_time which is
derived from previous return value of xen_steal_clock().
For instance, steal time of each vcpu is 335 before live migration.
cpu 198 0 368 200064 1962 0 0 1340 0 0
cpu0 38 0 81 50063 492 0 0 335 0 0
cpu1 65 0 97 49763 634 0 0 335 0 0
cpu2 38 0 81 50098 462 0 0 335 0 0
cpu3 56 0 107 50138 374 0 0 335 0 0
After live migration, steal time is reduced to 312.
cpu 200 0 370 200330 1971 0 0 1248 0 0
cpu0 38 0 82 50123 500 0 0 312 0 0
cpu1 65 0 97 49832 634 0 0 312 0 0
cpu2 39 0 82 50167 462 0 0 312 0 0
cpu3 56 0 107 50207 374 0 0 312 0 0
Since runstate times are cumulative and cleared during xen live migration
by xen hypervisor, the idea of this patch is to accumulate runstate times
to global percpu variables before live migration suspend. Once guest VM is
resumed, xen_get_runstate_snapshot_cpu() would always return the sum of new
runstate times and previously accumulated times stored in global percpu
variables.
Comment above HYPERVISOR_suspend() has been removed as it is inaccurate:
the call can return an error code (e.g., possibly -EPERM in the future).
Similar and more severe issue would impact prior linux 4.8-4.10 as
discussed by Michael Las at
https://0xstubs.org/debugging-a-flaky-cpu-steal-time-counter-on-a-paravirtualized-xen-guest,
which would overflow steal time and lead to 100% st usage in top command
for linux 4.8-4.10. A backport of this patch would fix that issue.
[boris: added linux/slab.h to driver/xen/time.c, slightly reformatted
commit message]
References: https://0xstubs.org/debugging-a-flaky-cpu-steal-time-counter-on-a-paravirtualized-xen-guest
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This is unused, and conflicts with the definition that we'll add for XPFO.
Signed-off-by: Tycho Andersen <tycho@docker.com>
Reviewed-by: Julien Grall <julien.grall@arm.com>
CC: Boris Ostrovsky <boris.ostrovsky@oracle.com>
CC: Juergen Gross <jgross@suse.com>
CC: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The macros for testing domain types are more complicated then they
need to. Simplify them.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Introduce the C header file which defines the PV Calls interface. It is
imported from xen/include/public/io/pvcalls.h.
Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: konrad.wilk@oracle.com
CC: boris.ostrovsky@oracle.com
CC: jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.
Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.
Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.
In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull dma-mapping infrastructure from Christoph Hellwig:
"This is the first pull request for the new dma-mapping subsystem
In this new subsystem we'll try to properly maintain all the generic
code related to dma-mapping, and will further consolidate arch code
into common helpers.
This pull request contains:
- removal of the DMA_ERROR_CODE macro, replacing it with calls to
->mapping_error so that the dma_map_ops instances are more self
contained and can be shared across architectures (me)
- removal of the ->set_dma_mask method, which duplicates the
->dma_capable one in terms of functionality, but requires more
duplicate code.
- various updates for the coherent dma pool and related arm code
(Vladimir)
- various smaller cleanups (me)"
* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
ARM: dma-mapping: Remove traces of NOMMU code
ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
ARM: NOMMU: Introduce dma operations for noMMU
drivers: dma-mapping: allow dma_common_mmap() for NOMMU
drivers: dma-coherent: Introduce default DMA pool
drivers: dma-coherent: Account dma_pfn_offset when used with device tree
dma: Take into account dma_pfn_offset
dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
dma-mapping: remove dmam_free_noncoherent
crypto: qat - avoid an uninitialized variable warning
au1100fb: remove a bogus dma_free_nonconsistent call
MAINTAINERS: add entry for dma mapping helpers
powerpc: merge __dma_set_mask into dma_set_mask
dma-mapping: remove the set_dma_mask method
powerpc/cell: use the dma_supported method for ops switching
powerpc/cell: clean up fixed mapping dma_ops initialization
tile: remove dma_supported and mapping_error methods
xen-swiotlb: remove xen_swiotlb_set_dma_mask
arm: implement ->dma_supported instead of ->set_dma_mask
mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
...
|
|
ARM and x86 had duplicated versions of the dma_ops structure, the
only difference is that x86 hasn't wired up the set_dma_mask,
mmap, and get_sgtable ops yet. On x86 all of them are identical
to the generic version, so they aren't needed but harmless.
All the symbols used only for xen_swiotlb_dma_ops can now be marked
static as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
Sync include/xen/interface/version.h with the Xen source.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When Xen restores a PVHVM or PVH guest, its shared_info only holds
up to 32 CPUs. The hypercall VCPUOP_register_vcpu_info allows
us to setup per-page areas for VCPUs. This means we can boot
PVH* guests with more than 32 VCPUs. During restore the per-cpu
structure is allocated freshly by the hypervisor (vcpu_info_mfn is
set to INVALID_MFN) so that the newly restored guest can make a
VCPUOP_register_vcpu_info hypercall.
However, we end up triggering this condition in Xen:
/* Run this command on yourself or on other offline VCPUS. */
if ( (v != current) && !test_bit(_VPF_down, &v->pause_flags) )
which means we are unable to setup the per-cpu VCPU structures
for running VCPUS. The Linux PV code paths makes this work by
iterating over cpu_possible in xen_vcpu_restore() with:
1) is target CPU up (VCPUOP_is_up hypercall?)
2) if yes, then VCPUOP_down to pause it
3) VCPUOP_register_vcpu_info
4) if it was down, then VCPUOP_up to bring it back up
With Xen commit 192df6f9122d ("xen/x86: allow HVM guests to use
hypercalls to bring up vCPUs") this is available for non-PV guests.
As such first check if VCPUOP_is_up is actually possible before
trying this dance.
As most of this dance code is done already in xen_vcpu_restore()
let's make it callable on PV, PVH and PVHVM.
Based-on-patch-by: Konrad Wilk <konrad.wilk@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
A HVM domian booting generates around 200K (evtchn:qemu-dm xen-dyn)
interrupts,in a short period of time. All these evtchn:qemu-dm are bound
to VCPU 0, until irqbalance sees these IRQ and moves it to a different VCPU.
In one configuration, irqbalance runs every 10 seconds, which means
irqbalance doesn't get to see these burst of interrupts and doesn't
re-balance interrupts most of the time, making all evtchn:qemu-dm to be
processed by VCPU0. This cause VCPU0 to spend most of time processing
hardirq and very little time on softirq. Moreover, if dom0 kernel PREEMPTION
is disabled, VCPU0 never runs watchdog (process context), triggering a
softlockup detection code to panic.
Binding evtchn:qemu-dm to next online VCPU, will spread hardirq
processing evenly across different CPU. Later, irqbalance will try to balance
evtchn:qemu-dm, if required.
Signed-off-by: Anoob Soman <anoob.soman@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Change the third parameter to be the required struct xen_dm_op_buf *
instead of a generic void * (which blindly accepts any pointer).
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When rebooting DOM0 with ACPI on ARM64, the kernel is crashing with the stack
trace [1].
This is happening because when EFI runtimes are enabled, the reset code
(see machine_restart) will first try to use EFI restart method.
However, the EFI restart code is expecting the reset_system callback to
be always set. This is not the case for Xen and will lead to crash.
The EFI restart helper is used in multiple places and some of them don't
not have fallback (see machine_power_off). So implement reset_system
callback as a call to xen_reboot when using EFI Xen.
[ |