summaryrefslogtreecommitdiffstats
path: root/include/uapi/misc
AgeCommit message (Collapse)Author
2020-11-30habanalabs: Add CB IOCTL opcode to retrieve CB informationTomer Tayar
Add a new CB IOCTL opcode that enables a user to query about a CB and get its usage count. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: add support for cs with timestampOfir Bitton
add support for user to request a timestamp upon cs completion. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: indicate to user that a cs is goneOfir Bitton
We want to indicate to the user that a certain command submission is finished long time ago and it is no longer in database. This means no further information regarding this cs can be obtained. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: fetch pll frequency from firmwareAlon Mizrahi
Once firmware security is enabled, driver must fetch pll frequencies through the firmware message interface instead of reading the registers directly. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: add 'needs reset' state in driverOfir Bitton
The new state indicates that device should be reset in order to re-gain funcionality. This unique state can occur if reset_on_lockup is disabled and an actual lockup has occurred. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: fix cs counters structurefarah kassabri
Fix cs counters structure in uapi to be one flat structure instead of two instances of the same other structure. use atomic read/increment for context counters so we could use one structure for both aggregated and context counters. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: sync stream collective supportOfir Bitton
Implement sync stream collective for GAUDI. Need to allocate additional resources for that and add ctx_fini() to clean up those resources. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs/gaudi: Set DMA5 QMAN internalOfir Bitton
DMA5 QMAN is designated to be used for reduction process, hence it will be no longer configured as external queue. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: sync stream collective infrastructureOfir Bitton
Define new API for collective wait support and modify sync stream common flow. In addition add kernel CB allocation support for internal queues. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-11-30habanalabs: use enum for CB allocation optionsTal Cohen
In the future there will be situations where queues can accept either kernel allocated CBs or user allocated CBs, depending on different states. Therefore, instead of using a boolean variable of kernel/user allocated CB, we need to use a bitmask to indicate that, which will allow to combine the two options. Add a flag to the uapi so the user will be able to indicate whether the CB was allocated by kernel or by user. Of course the driver validates that. Signed-off-by: Tal Cohen <talcohen@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2020-09-22habanalabs: Add an option to map CB to device MMUTomer Tayar
There are cases in which the device should access the host memory of a CB through the device MMU, and thus this memory should be mapped. The patch adds a flag to the CB IOCTL, in which a user can ask the driver to perform the mapping when creating a CB. The mapping is allowed only if a dedicated VA range was allocated for the specific ASIC. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: allow to wait on CS without sleepOded Gabbay
The user sometimes wants to check if a CS has completed to clean resources. In that case, the user doesn't want to sleep but just to check if the CS has finished and continue with his code. Add a new definition to the API of the wait on CS. The new definition says that if the timeout is 0, the driver won't sleep at all but return immediately after checking if the CS has finished. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: count dropped CS because max CS in-flightOded Gabbay
There is a case where the user reaches the maximum number of CS in-flight. In that case, the driver rejects the new CS of the user with EAGAIN. Count that event so the user can query the driver later to see if it happened. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: replace armcp with the generic cpucpOded Gabbay
ArmCP mandates that the device CPU is always an ARM processor, which might be wrong in the future. Most of this change is an internal renaming of variables, functions and defines but there are two entries in sysfs which have armcp in their names. Add identical cpucp entries but don't remove yet the armcp entries. Those will be deprecated next year. Add the documentation about it in sysfs documentation. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: add support for getting device total energyfarah kassabri
Add driver implementation for reading the total energy consumption from the device ARM FW. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: extend busy engines mask to 64 bitsfarah kassabri
change busy engines bitmask to 64 bits in order to represent more engines, needed for future ASIC support. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: expose sync manager resources allocation in INFO IOCTLOfir Bitton
Although the driver defines the first user-available sync manager object and monitor in habanalabs.h, we would like to also expose this information via the INFO IOCTL so the runtime can get this information dynamically. This is because in future ASICs we won't need to define it statically. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-22habanalabs: add information about PCIe controllerOfir Bitton
Update firmware header with new API for getting pcie info such as tx/rx throughput and replay counter. These counters are needed by customers for monitor and maintenance of multiple devices. Add new opcodes to the INFO ioctl to retrieve these counters. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-09-16misc: fastrpc: add ioctl for attaching to sensors pdJonathan Marek
Initializing sensors requires attaching to pd 2. Add an ioctl for that. This corresponds to FASTRPC_INIT_ATTACH_SENSORS in the downstream driver. Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200908131013.19630-4-jonathan@marek.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-16misc: fastrpc: fix indentation error in uapi headerJonathan Marek
Use tabs instead of spaces. Fixes: 2419e55e532d ("misc: fastrpc: add mmap/unmap support") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Link: https://lore.kernel.org/r/20200908131013.19630-2-jonathan@marek.ca Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24habanalabs: Add dropped cs statistics info structOfir Bitton
Add command submission statistics structure which can be obtained through the info ioctl. Each drop counter describes the reason for which the command submission was dropped. This information is needed for the user to be aware of the specific reason for which the submitted work was dropped. The user can then utilize the driver more efficiently. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-07-24uapi/habanalabs: fix some commentsOded Gabbay
MAP/UNMAP are done also for device memory. Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19uapi: habanalabs: add gaudi definesOded Gabbay
Add the new defines for GAUDI uapi interface. It includes the queue IDs, the engine IDs, SRAM reserved space and Sync Manager reserved resources. There is no new IOCTL or additional operations in existing IOCTLs. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: get card type, location from F/WOmer Shpigelman
For Gaudi the driver gets two new additional properties from the F/W: 1. The card's type - PCI or PMC 2. The card's location in the Gaudi's box (relevant only for PMC). The card's location is also passed to the user in the HW IP info structure as it needs this property for establishing communication between Gaudis. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19uapi: habanalabs: add signal/wait operationsOmer Shpigelman
This is a pre-requisite to upstreaming GAUDI support. Signal/wait operations are done by the user to perform sync between two Primary Queues (PQs). The sync is done using the sync manager and it is usually resolved inside the device, but sometimes it can be resolved in the host, i.e. the user should be able to wait in the host until a signal has been completed. The mechanism to define signal and wait operations is done by the driver because it needs atomicity and serialization, which is already done in the driver when submitting work to the different queues. To implement this feature, the driver "takes" a couple of h/w resources, and this is reflected by the defines added to the uapi file. The signal/wait operations are done via the existing CS IOCTL, and they use the same data structure. There is a difference in the meaning of some of the parameters, and for that we added unions to make the code more readable. Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: leave space for 2xMSG_PROT in CBOded Gabbay
The user must leave space for 2xMSG_PROT in the external CB, so adjust the define of max size accordingly. The driver, however, can still create a CB with the maximum size of 2MB. Therefore, we need to add a check specifically for the user requested size. Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-05-19habanalabs: Add INFO IOCTL opcode for time sync informationTomer Tayar
Add a new opcode to the INFO IOCTL that retrieves the device time alongside the host time, to allow a user application that want to measure device time together with host time (such as a profiler) to synchronize these times. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2020-02-22crypto: hisilicon - register zip engine to uacceZhangfei Gao
Register qm to uacce framework for user crypto driver Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-02-22uacce: add uacce driverKenneth Lee
Uacce (Unified/User-space-access-intended Accelerator Framework) targets to provide Shared Virtual Addressing (SVA) between accelerators and processes. So accelerator can access any data structure of the main cpu. This differs from the data sharing between cpu and io device, which share only data content rather than address. Since unified address, hardware and user space of process can share the same virtual address in the communication. Uacce create a chrdev for every registration, the queue is allocated to the process when the chrdev is opened. Then the process can access the hardware resource by interact with the queue file. By mmap the queue file space to user space, the process can directly put requests to the hardware without syscall to the kernel space. The IOMMU core only tracks mm<->device bonds at the moment, because it only needs to handle IOTLB invalidation and PASID table entries. However uacce needs a finer granularity since multiple queues from the same device can be bound to an mm. When the mm exits, all bound queues must be stopped so that the IOMMU can safely clear the PASID table entry and reallocate the PASID. An intermediate struct uacce_mm links uacce devices and queues. Note that an mm may be bound to multiple devices but an uacce_mm structure only ever belongs to a single device, because we don't need anything more complex (if multiple devices are bound to one mm, then we'll create one uacce_mm for each bond). uacce_device --+-- uacce_mm --+-- uacce_queue | '-- uacce_queue | '-- uacce_mm --+-- uacce_queue +-- uacce_queue '-- uacce_queue Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Kenneth Lee <liguozhu@hisilicon.com> Signed-off-by: Zaibo Xu <xuzaibo@huawei.com> Signed-off-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-01-14misc: pvpanic: add crash loaded eventzhenwei pi
Some users prefer kdump tools to generate guest kernel dumpfile, at the same time, need a out-of-band kernel panic event. Currently if booting guest kernel with 'crash_kexec_post_notifiers', QEMU will receive PVPANIC_PANICKED event and stop VM. If booting guest kernel without 'crash_kexec_post_notifiers', guest will not call notifier chain. Add PVPANIC_CRASH_LOADED bit for pvpanic event, it means that guest kernel actually hit a kernel panic, but the guest kernel wants to handle by itself. Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Link: https://lore.kernel.org/r/20200102023513.318836-3-pizhenwei@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-14misc: pvpanic: move bit definition to uapi header filezhenwei pi
Some processes outside of the kernel(Ex, QEMU) should know what the value really is for, so move the bit definition to a uapi file. Suggested-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: zhenwei pi <pizhenwei@bytedance.com> Link: https://lore.kernel.org/r/20200102023513.318836-2-pizhenwei@bytedance.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-21habanalabs: expose reset counters via existing INFO IOCTLMoti Haimovski
Expose both soft and hard reset counts via INFO IOCTL. This will allow system management applications to easily check if the device has undergone reset. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-11-21habanalabs: export uapi defines to user-spaceOded Gabbay
The two defines that control the maximum size of a command buffer and the maximum number of JOBS per CS need to be exported to the user as they are part of the API towards user-space. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
2019-11-21habanalabs: expose card name in INFO IOCTLOded Gabbay
To enable userspace processes, e.g. management utilities, to display the card name to the user, add the card name property to the HW_IP structure that is copied to the user in the INFO IOCTL. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-11-21habanalabs: add opcode to INFO IOCTL to return clock rateOded Gabbay
Add a new opcode to the INFO IOCTL to allow the user application to retrieve the ASIC's current and maximum clock rate. The rate is returned in MHz. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Tomer Tayar <ttayar@habana.ai>
2019-11-21habanalabs: Fix typosTomer Tayar
s/paerser/parser/ s/requeusted/requested/ s/an JOB/a JOB/ Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-10-10misc: fastrpc: add mmap/unmap supportJorge Ramirez-Ortiz
Support the allocation/deallocation of buffers mapped to the DSP. When the memory mapped to the DSP at process creation is not enough, the fastrpc library can extend it at runtime. This avoids having to do large preallocations by default. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20191009144123.24583-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-05habanalabs: stop using the acronym KMDOded Gabbay
We want to stop using the acronym KMD. Therefore, replace all locations (except for register names we can't modify) where KMD is written to other terms such as "Linux kernel driver" or "Host kernel driver", etc. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
2019-09-05habanalabs: add uapi to retrieve aggregate H/W eventsOded Gabbay
Add a new opcode to INFO IOCTL to retrieve aggregate H/W events. i.e. the events counters are NOT cleared upon device reset, but count from the loading of the driver. Add the code to support it in the device event handling function. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
2019-09-05habanalabs: add uapi to retrieve device utilizationOded Gabbay
Users and sysadmins usually want to know what is the device utilization as a level 0 indication if they are efficiently using the device. Add a new opcode to the INFO IOCTL that will return the device utilization over the last period of 100-1000ms. The return value is 0-100, representing as percentage the total utilization rate. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
2019-09-05habanalabs: Make the Coresight timestamp perpetualTomer Tayar
The Coresight timestamp is enabled for a specific debug session using the HL_DEBUG_OP_TIMESTAMP opcode of the debug IOCTL. In order to have a perpetual timestamp that would be comparable between various debug sessions, this patch moves the timestamp enablement to be part of the HW initialization. The HL_DEBUG_OP_TIMESTAMP opcode turns to be deprecated and shouldn't be used. Old user-space that will call it won't see any change in the behavior of the debug session. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-09-05habanalabs: explicitly set the queue-id enumerated numbersDotan Barak
When looking at kernel log messages and when debugging user applications, we only see the queue id. This patch explicitly set the queue id in the queue enumeration which will be helpful for finding the queue name when we have its id. Signed-off-by: Dotan Barak <dbarak@habana.ai> Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-09-05habanalabs: add comments on INFO IOCTLOded Gabbay
This patch adds some in-code documentation on the different opcodes of the INFO IOCTL. Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com> Reviewed-by: Omer Shpigelman <oshpigelman@habana.ai>
2019-08-15misc: xilinx_sdfec: Add stats & status ioctlsDragan Cvetic
SD-FEC statistic data are: - count of data interface errors (isr_err_count) - count of Correctable ECC errors (cecc_count) - count of Uncorrectable ECC errors (uecc_count) Add support: 1. clear stats ioctl callback which clears collected statistic data, 2. get stats ioctl callback which reads a collected statistic data, 3. set default configuration ioctl callback, 4. start ioctl callback enables SD-FEC HW, 5. stop ioctl callback disables SD-FEC HW. In a failed state driver enables the following ioctls: - get status - get statistics - clear stats - set default SD-FEC device configuration Tested-by: Santhosh Dyavanapally <SDYAVANA@xilinx.com> Tested by: Punnaiah Choudary Kalluri <punnaia@xilinx.com> Tested-by: Derek Kiernan <derek.kiernan@xilinx.com> Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-7-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Support poll file operationDragan Cvetic
Support monitoring and detecting the SD-FEC error events through IRQ and poll file operation. The SD-FEC device can detect one-error or multi-error events. An error triggers an interrupt which creates and run the ONE_SHOT IRQ thread. The ONE_SHOT IRQ thread detects type of error and pass that information to the poll function. The file_operation callback poll(), collects the events and updates the statistics accordingly. The function poll blocks() on waiting queue which can be unblocked by ONE_SHOT IRQ handling thread. Support SD-FEC interrupt set ioctl callback. The SD-FEC can detect two type of errors: coding errors (ECC) and a data interface errors (TLAST). The errors are events which can trigger an IRQ if enabled. The driver can monitor and detect these errors through IRQ. Also the driver updates the statistical data. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-6-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add ability to get/set configDragan Cvetic
- Add capability to get SD-FEC config data using ioctl XSDFEC_GET_CONFIG. - Add capability to set SD-FEC data order using ioctl SDFEC_SET_ORDER. - Add capability to set SD-FEC bypass option using ioctl XSDFEC_SET_BYPASS. - Add capability to set SD-FEC active state using ioctl XSDFEC_IS_ACTIVE. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-5-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add ability to configure LDPCDragan Cvetic
Add the capability to configure LDPC mode via the ioctl XSDFEC_ADD_LDPC_CODE_PARAMS. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-4-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Add ability to configure turboDragan Cvetic
Add the capability to configure and retrieve turbo mode via the ioctls XSDFEC_SET_TURBO and XSDFEC_GET_TURBO. Add char device interface per DT node present and support file operations: - open(), - close(), - unlocked_ioctl(), - compat_ioctl(). Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-3-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-15misc: xilinx_sdfec: Store driver config and stateDragan Cvetic
Stores configuration based on parameters from the DT node and values from the SD-FEC core plus reads the default state from the SD-FEC core. To obtain values from the core register read, write capabilities have been added plus related register map details. Tested-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Signed-off-by: Derek Kiernan <derek.kiernan@xilinx.com> Signed-off-by: Dragan Cvetic <dragan.cvetic@xilinx.com> Link: https://lore.kernel.org/r/1564216438-322406-2-git-send-email-dragan.cvetic@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headersMasahiro Yamada
UAPI headers licensed under GPL are supposed to have exception "WITH Linux-syscall-note" so that they can be included into non-GPL user space application code. The exception note is missing in some UAPI headers. Some of them slipped in by the treewide conversion commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license"). Just run: $ git show --oneline b24413180f56 -- arch/x86/include/uapi/asm/ I believe they are not intentional, and should be fixed too. This patch was generated by the following script: git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \ -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild | while read file do sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \ -e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \ -e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file done After this patch is applied, there are 5 UAPI headers that do not contain "WITH Linux-syscall-note". They are kept untouched since this exception applies only to GPL variants. $ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \ -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */ include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */ include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */ include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */ include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-07 05:28:24 +0000