summaryrefslogtreecommitdiffstats
path: root/include/scsi
AgeCommit message (Collapse)Author
2010-06-02SCSI: implement sd_unlock_native_capacity()Tejun Heo
Implement sd_unlock_native_capacity() method which calls into hostt->unlock_native_capacity() if implemented. This will be invoked by block layer if partitions extend beyond the end of the device and can be used to implement, for example, on-demand ATA host protected area unlocking. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-16[SCSI] libfc: Move the port_id into lportRobert Love
This patch creates a port_id member in struct fc_lport. This allows libfc to just deal with fc_lport instances instead of calling into the fc_host to get the port_id. This change helps in only using symbols necessary for operation from the libfc structures. libfc still needs to change the fc_host_port_id() if the port_id changes so the presentation layer (scsi_transport_fc) can provide the user with the correct value, but libfc shouldn't rely on the presentation layer for operational values. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-16[SCSI] libfc: Remove unused fc_get_host_port_typeRobert Love
Remove this unused routine. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-05-02[SCSI] Unexport scsi/scsi.h from headers_installTom Rini
The scsi/scsi.h header is normally provided by the libc (and was not exported by the kernel since 2.6.24) and has been until it was re-exported with 2.6.31. The kernel version is not userspace clean and does not appear to provide anything useable in userland over the (e)glibc version. Signed-off-by: Tom Rini <tom_rini@mentor.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-30[SCSI] Add missing scsi command definitionsMartin K. Petersen
Add definitions for VERIFY(12) and VERIFY(32). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] fcoe, fnic, libfc: increased CDB size to 16 bytes for fcoe.Vasu Dev
No reason to restrict CDB size to 12 bytes in fcoe, so increased to 16 so that 16 bytes SCSI CDB doesn't fail. Uses common define to set max_cmd_len for fcoe and fnic, fnic is already setting max_cmd_len to 16. sg_readcap -l fails without this fix. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] libfc: fix hton24 macro to take expressions as argsJoe Eykholt
hton24(p + 3, value) would fail to compile because p + 3[0] is not a valid expression. Went ahead and converted hton24 and ntoh24 to inline functions, which is better because the parameters are evalutated only once. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] Allow FC LLD to fast-fail scsi eh by introducing new eh returnChristof Schmitt
If the scsi eh is running and then a FC LLD calls fc_remote_port_delete, the SCSI commands sent from the eh will fail. To prevent this, a FC LLD can call fc_block_scsi_eh from the eh callback, blocking the eh thread until the dev_loss_tmo fires or the remote port is available again. If (e.g. for a multipathing setup) the dev_loss_tmo is set to a very large value, thus preventing the scsi device removal , the scsi eh can block for a long time. For multipathing, the fast_io_fail_tmo is then set to a low value to detect path problems sooner. This patch introduces a new return code FAST_IO_FAIL. The function fc_block_scsi_eh now returns FAST_IO_FAIL when the fast_io_fail_tmo fires. This indicates that the LLD terminated all pending I/O requests and there are no more pending SCSI commands for the scsi eh to wait for. This return code can be passed back to the scsi eh to stop the escalation and finish the recovery process for this device. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] libfc, libfcoe, fcoe: use smp_processor_id() only when preempt disabledJoe Eykholt
When the kernel is configured for preemption, using smp_processor_id() when preemption is enabled causes a warning backtrace and is wrong since we could move off of that CPU as soon as we get the ID, and we would be referencing the wrong CPU, and possibly an invalid one if it could be hotswapped out. Remove the fc_lport_get_stats() function and explicitly use per_cpu_ptr() to get the statistics. Where preemption has been disabled by holding a _bh lock continue to use smp_processor_id(), but otherwise use get_cpu()/put_cpu(). In fcoe_recv_frame() also changed the cases where we return in the middle to do a goto to the code which bumps ErrorFrames and does a put_cpu(). Two of these cases didn't bump ErrorFrames before, but doing so is harmless because they "can't happen", due to prior length checks. Also rearranged code in fcoe_recv_frame() to have only one call to fc_exch_recv(). It's just as efficient and saves a call to put_cpu(). In fc_fcp.c, adjusted a FIXME comment for code which doesn't need fixing. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] libfcoe: eliminate unused link and last_link fieldsJoe Eykholt
The link and last_link fields in the fcoe_ctlr struct are no longer useful, since they are always set to the same value, and FIP always calls libfc to pass link information to the lport. Eliminate those fields and rename link_work to timer_work, since it no longer has any link change work to do. Thanks to Brian Uchino for discovering this issue. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] libfc: add definition for task attribute maskJoe Eykholt
The FCP command header definition should define a mask for the task attribute field. This adds that #define. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
2010-03-12sysctl extern cleanup: sgDave Young
Extern declarations in sysctl.c should be moved to their own header file, and then include them in relavant .c files. Move sg_big_buff extern declaration to scsi/sg.h Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: Doug Gilbert <dgilbert@interlog.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-03[SCSI] libiscsi: Make iscsi_eh_target_reset start with session resetJayamohan Kallickal
The iscsi_eh_target_reset has been modified to attempt target reset only. If it fails, then iscsi_eh_session_reset will be called. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-08[SCSI] scsi_transport_sas: add support for transport layer retries (TLR)James Bottomley
The mpt2sas driver wants to use transport layer retries (TLR) so the simplest thing to do seems to be to add the enabling flags and checks to the SAS transport class, since they're a SAS specific protocol feature. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18[SCSI] eliminate potential kmalloc failure in scsi_get_vpd_page()James Bottomley
The best way to fix this is to eliminate the intenal kmalloc() and make the caller allocate the required amount of storage. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-17[SCSI] fc-transport: Use packed modifier for fc_bsg_request structure.Harish Zunjarrao
The 32bit kernel does not add padding bytes in the fc_bsg_request structure whereas the 64bit kernel adds padding bytes in the fc_bsg_request structure. Due to this, structure elements gets mismatched with 32bit application and 64bit kernel.To resolve this, used packed modifier to avoid adding padding bytes. Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-30libsrp: fix compile failureJames Bottomley
commit 45465487897a1c6d508b14b904dc5777f7ec7e04 ("kfifo: move struct kfifo in place") caused a compile failure in ibmvscsitgt.c because it changed a pointer to kfifo in the libsrp.h structure to a direct inclusion without including <linux/kfifo.h>. The fix is simple, just add the include, but how did this happen? This change, introduced at -rc2, hardly looks like a bug fix, and it clearly didn't go through linux-next, which would have picked up this compile failure (it only occurs on ppc because of the ibm virtual scsi target). [ Apparently all of -mm wasn't in linux-next.. ] Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-22kfifo: move struct kfifo in placeStefani Seibold
This is a new generic kernel FIFO implementation. The current kernel fifo API is not very widely used, because it has to many constrains. Only 17 files in the current 2.6.31-rc5 used it. FIFO's are like list's a very basic thing and a kfifo API which handles the most use case would save a lot of development time and memory resources. I think this are the reasons why kfifo is not in use: - The API is to simple, important functions are missing - A fifo can be only allocated dynamically - There is a requirement of a spinlock whether you need it or not - There is no support for data records inside a fifo So I decided to extend the kfifo in a more generic way without blowing up the API to much. The new API has the following benefits: - Generic usage: For kernel internal use and/or device driver. - Provide an API for the most use case. - Slim API: The whole API provides 25 functions. - Linux style habit. - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros - Direct copy_to_user from the fifo and copy_from_user into the fifo. - The kfifo itself is an in place member of the using data structure, this save an indirection access and does not waste the kernel allocator. - Lockless access: if only one reader and one writer is active on the fifo, which is the common use case, no additional locking is necessary. - Remove spinlock - give the user the freedom of choice what kind of locking to use if one is required. - Ability to handle records. Three type of records are supported: - Variable length records between 0-255 bytes, with a record size field of 1 bytes. - Variable length records between 0-65535 bytes, with a record size field of 2 bytes. - Fixed size records, which no record size field. - Preserve memory resource. - Performance! - Easy to use! This patch: Since most users want to have the kfifo as part of another object, reorganize the code to allow including struct kfifo in another data structure. This requires changing the kfifo_alloc and kfifo_init prototypes so that we pass an existing kfifo pointer into them. This patch changes the implementation and all existing users. [akpm@linux-foundation.org: fix warning] Signed-off-by: Stefani Seibold <stefani@seibold.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Andi Kleen <ak@linux.intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-10[SCSI] libosd: Fix blk_put_request locking againBoaz Harrosh
So libosd has decided to sacrifice some code simplicity for the sake of a clean API. One of these things is the possibility for users to call osd_end_request, in any condition at any state. This opens up some problems with calling blk_put_request when out-side of the completion callback but calling __blk_put_request when detecting a from-completion state. The current hack was working just fine until exofs decided to operate on all devices in parallel and wait for the sum of the requests, before deallocating all osd-requests at once. There are two new possible cases 1. All request in a group are deallocated as part of the last request's async-done, request_queue is locked. 2. All request in a group where executed asynchronously, but de-allocation was delayed to after the async-done, in the context of another thread. Async execution but request_queue is not locked. The solution I chose was to separate the deallocation of the osd_request which has the information users need, from the deallocation of the internal(2) requests which impose the locking problem. The internal block-requests are freed unconditionally inside the async-done-callback, when we know the queue is always locked. If at osd_end_request time we still have a bock-request, then we know it did not come from within an async-done-callback and we can call the regular blk_put_request. The internal requests were used for carrying error information after execution. This information is now copied to osd_request members for later analysis by user code. The external API and behaviour was unchanged, except now it really supports what was previously advertised. Reported-by: Vineet Agarwal <checkout.vineet@gmail.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (222 commits) [SCSI] zfcp: Remove flag ZFCP_STATUS_FSFREQ_TMFUNCNOTSUPP [SCSI] zfcp: Activate fc4s attributes for zfcp in FC transport class [SCSI] zfcp: Block scsi_eh thread for rport state BLOCKED [SCSI] zfcp: Update FSF error reporting [SCSI] zfcp: Improve ELS ADISC handling [SCSI] zfcp: Simplify handling of ct and els requests [SCSI] zfcp: Remove ZFCP_DID_MASK [SCSI] zfcp: Move WKA port to zfcp FC code [SCSI] zfcp: Use common code definitions for FC CT structs [SCSI] zfcp: Use common code definitions for FC ELS structs [SCSI] zfcp: Update FCP protocol related code [SCSI] zfcp: Dont fail SCSI commands when transitioning to blocked fc_rport [SCSI] zfcp: Assign scheduled work to driver queue [SCSI] zfcp: Remove STATUS_COMMON_REMOVE flag as it is not required anymore [SCSI] zfcp: Implement module unloading [SCSI] zfcp: Merge trace code for fsf requests in one function [SCSI] zfcp: Access ports and units with container_of in sysfs code [SCSI] zfcp: Remove suspend callback [SCSI] zfcp: Remove global config_mutex [SCSI] zfcp: Replace local reference counting with common kref ...
2009-12-04[SCSI] libfc: Add target reset flag to FCP header fileChristof Schmitt
While the target reset task management function has been deprecated in newer specs, it is still in use by SCSI FC drivers and there is no real replacement. Add the target reset flag to the FCP header file to allow usage of this definition in SCSI FC drivers. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] fcoe, libfc: add get_lesb() to allow LLD to fill the link error ↵Yi Zou
status block (LESB) Add a member function pointer as get_lesb to libfc_function_template so LLD can fill the LESB based on its own statistics. For fcoe, it fills the LESB as a fcoe_fc_els_lesb struct according to FC-BB-5. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: add fcoe_fc_els_lesb to fc_fcoe.h for FC-BB-5 LESB definitionsYi Zou
Add struct fcoe_fc_els_lesb as described in FC-BB-5 LESB for FCoE. It has the same size as LESB defined in FC-FS-3 (struct fc_els_lesb) but members have different meanings according to FC-BB-5. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: add checking disable flag in FIP_FKA_ADVYi Zou
When the D bit is set if the FKA_ADV_Period of the FIP Discovery Advertisement, the ENode should not transmit period ENode FIP Keep Alive and VN_Port FIP Keep Alive (FC-BB-5 Rev2, 7.8.3.13). Note that fcf->flags is taken directly from the fip_header, I am claiming one bit for the purpose of the FIP_FKA_Period D bit as FIP_FL_FK_ADV_B, and use FIP_HEADER_FLAGS as bitmask for bits used in fip_header. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: add FC-BB-5 LESB counters to fcoe_dev_statsYi Zou
FC-BB-5 Rev2.0, Clause 7.10 extends the FC-LS-3 LESB for FC-BB_E. We are already tracking Link Failure Count so add the rest in this patch. For VLinkFailureCount and MissDiscAdvCount, they are part of the per-cpu fcoe_dev_stats. For SymbolErrorCount, ErroredBlockCount, and FCSErrorCount, they are defined in IEEE 802.3-2008 and are per LLD. They are expected to come from LLD. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] osd_protocol.h: Add missing #includeMartin Michlmayr
include/scsi/osd_protocol.h uses ALIGN() without an #include <linux/kernel.h>, leading to: | include/scsi/osd_protocol.h:362: error: implicit declaration of function 'ALIGN' Signed-off-by: Martin Michlmayr <tbm@cyrius.com> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libosd: Error handling revampedBoaz Harrosh
Administer some love to the osd_req_decode_sense function * Fix a bad bug with osd_req_decode_sense(). If there was no scsi residual, .i.e the request never reached the target, then all the osd_sense_info members where garbage. * Add grossly missing in/out_resid to osd_sense_info and fill them in properly. * Define an osd_err_priority enum which divides the possible errors into 7 categories in ascending severity. Each category is also assigned a Linux return code translation. Analyze the different osd/scsi/block returned errors and set the proper osd_err_priority and Linux return code accordingly. * extra check a few situations so not to get stuck with inconsistent error view. Example an empty residual with an error code, and other places ... Lots of libosd's osd_req_decode_sense clients had this logic in some form or another. Consolidate all these into one place that should actually know about osd returns. Thous translating it to a more abstract error. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libosd: osd_dev_info: Unique Identification of an OSD deviceBoaz Harrosh
Define an osd_dev_info structure that Uniquely identifies an OSD device lun on the network. The identification is built from unique target attributes and is the same for all network/SAN machines. osduld_info_lookup() - NEW New API that will lookup an osd_dev by its osd_dev_info. This is used by pNFS-objects for cross network global device identification. And by exofs multy-device support, the device info is specified in the on-disk exofs device table. osduld_device_info() - NEW Given an osd_dev handle returns its associated osd_dev_info. The ULD fetches this information at startup and hangs it on each OSD device. (This is a fast operation that can be called at any condition) osduld_device_same() - NEW With a given osd_dev at one hand and an osd_dev_info at another, we would like to know if they are the same device. Two osd_dev handles can be checked by: osduld_device_same(od1, osduld_device_info(od2)); osd_auto_detect_ver() - REVISED Now returns an osd_dev_info structure. Is only called once by ULD as before. See added comments for how to use. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] osduld: Use device->release instead of internal krefBoaz Harrosh
The true logic of this patch will be clear in the next patch where we use the class_find_device() API. When doing so the use of an internal kref leaves us a narrow window where a find is started while the actual object can go away. Using the device's kobj reference solves this problem because now the same kref is used for both operations. (Remove and find) Core changes * Embed a struct device in uld_ structure and use device_register instead of devie_create. Set __remove to be the device release function. * __uld_get/put is just get_/put_device. Now every thing is accounted for on the device object. Internal kref is removed. * At __remove() we can safely de-allocate the uld_ structure. (The function has moved to avoid forward declaration) Some cleanups * Use class register/unregister is cleaner for this driver now. * cdev ref-counting games are no longer necessary I have incremented the device version string in case of new bugs. Note: Previous bugfix of taking the reference around fput() still applies. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libosd: osd_sense: OSD_CFO_PERMISSIONSBoaz Harrosh
Add one more important cdb_field_offset that can be returned with scsi_invalid_field_in_cdb. It is the offset of the permissions_bit_mask field in the capabilities structure. Interestingly, the offset is the same for V1/V2 Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libosd: osd_dev_is_ver1 - Minor API cleanupBoaz Harrosh
define a new osd_dev_is_ver1 that operates on devices and the old osd_req_is_ver1 uses that new API. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libiscsi: add warm target reset tmf supportMike Christie
This implements warm target reset tmf support for the scsi-ml target reset callback. Previously we would just drop the session in that callback. This patch will now try a target reset and if that fails drop the session. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libiscsi: Check TMF state before sending PDUMike Christie
Patch and mail from both MikeC and HannesR: Before we're trying to send a PDU we have to check whether a TMF is active. If so and if the PDU will be affected by the TMF we should allow only Data-out PDUs to be sent. If fast_abort is set, no Data-out PDUs will be sent while a LUN reset is being processed for a affected LUN. fast_abort is now ingored during a ABORT TASK tmf. We will not send any Data-outs for a task if the task is being aborted. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] scsi_lib_dma: fix bug with dma maps on nested scsi objectsJames Bottomley
Some of our virtual SCSI hosts don't have a proper bus parent at the top, which can be a problem for doing DMA on them This patch makes the host device cache a pointer to the physical bus device and provides an extra API for setting it (the normal API picks it up from the parent). This patch also modifies the qla2xxx and lpfc vport logic to use the new DMA host setting API. Acked-By: James Smart <james.smart@emulex.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: register FC4 features with the FC switchJoe Eykholt
Customers and certification tests have pointed out that we don't show up on the switch management software as an initiator. On some MDS switches 'show fcns database' command shows libfc initiators as 'fcp' not 'fcp:init' like other initiators. On others switches, I think the switch gets the features by doing a PRLI, but it may be only certain models or under certain configurations. Fix this by registering our FC4 features with the RFF_ID CT request after local port login and after the RFT_ID. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: fcoe: simplify receive FLOGI responseJoe Eykholt
There was a locking problem where the fip->lock was held during the call to update_mac(). The rtnl_lock() must be taken before the fip->lock, not the other way around. This fixes that. Now that fcoe_ctlr_recv_flog() is called only from the response handler to a FLOGI request, some checking can be eliminated. Instead of calling update_mac(), just fill in the granted_mac address for the passed-in frame (skb). Eliminate the passed-in source MAC address since it is also in the skb. Also, in fcoe, call fcoe_set_src_mac() directly instead of going thru the fip function pointer. This will generate less code. Then, since fip isn't needed for LOGO response, use lport as the arg. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: add set_fid function to libfc templateJoe Eykholt
This is to notify the LLD when an FC_ID is assigned to the local port. The fnic driver needs to push the assigned FC_ID to firmware. It currently does this by intercepting the FLOGI responses, and in order to make that code more common with FIP and NPIV, it makes more sense to wait until the local port has completely handled the FLOGI or FDISC response. Also, when we fix point-to-point FC_ID assignment, we'll need this callback as well. Add a call to the libfc template, which is called whenever the local port FC_ID is being assigned. It defaults to fc_lport_set_fid(), supplied by libfc. As additional benefit of this function, the LLD may determine the MAC address that caused the change by looking at the received frame. We also print the assigned port ID as long as it isn't 0. Setting port ID to 0 happens often in reset while retrying FLOGI, and would be uninteresting. This replaces the previous message which didn't identify the host adapter instance. patch v2 note: changed one word in a comment. "intercepted" -> "provided". Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: fix symbolic name registrations smashing skb dataJoe Eykholt
The strncpy for RSPN_ID and RSNN_NN requests was padding past the allocated frame size. Get the string length before filling in the ct header. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: fix RNN_ID smashing skb payloadJoe Eykholt
The code that filled in the name server RNN_ID (register node name) request had somehow gotten a line in it from the RFT_ID code which copies 32 bytes of data over the relatively short payload. This caused some corruption and hangs. Simply deleted the extraneous line. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: FIP should report link to libfc whether selected or notJoe Eykholt
The fnic driver with FIP is reporting link up, even though it's down. When the interface is shut down by the switch, we receive a clear virtual link, and set the state reported to libfc as down, although we still report it up. Clearly wrong. That causes the subsequent link down event not to be reported, and /sys shows the host "Online". Currently, in FIP mode, if an FCF times out, then link to libfc is reported as down, to stop FLOGIs. That interferes with the LLD link down being reported. Users really need to know the physical link information, to diagnose cabling issues, so physical link status should be reported to libfc. If the selected FCF needs to be reported, that should be done separately, in a later patch. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: Allow FIP to be disabled by the driverJoe Eykholt
Allow FIP to be disabled by the driver for devices that want to use libfcoe in non-FIP mode. The driver merely sets the fcoe_ctlr mode to the state which should be entered when the link comes up. The default is auto. No change is needed for fcoe.c which uses auto mode. Signed-off-by: Joe Eykholt <jeykholt@cisco.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] fcoe, libfc: use single frame allocation APIVasu Dev
Cleans up frame allocation APIs to have just single fc_frame_alloc API. Removes _fc_frame_alloc, renames __fc_frame_alloc to _fc_frame_alloc. Modifies fc_fcp_send_data for removed _fc_frame_alloc, fc_fcp_send_data was the only user of removed _fc_frame_alloc. Also Adds check in fc_frame_alloc to do mod by 4 for only non-zero len value. This patch is prep work to fix can_queue reducing in next patch. Single fc_frame_alloc API helps in fixing can_queue reducing in next patch. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfcoe: formatting and comment cleanupsRobert Love
Ensures that there are kernel-doc style comments for all routines and structures. There were also a few instances of fc_lport's named 'lp' which were switched to 'lport' as per the libfc/libfcoe/fcoe naming convention. Also, emacs 'indent-region' and 'tabify' were ran on libfcoe.c. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: Formatting cleanups across libfcRobert Love
This patch makes a variety of cleanup changes to all libfc files. This patch adds kernel-doc headers to all functions lacking them and attempts to better format existing headers. It also add kernel-doc headers to structures. This patch ensures that the current naming conventions for local ports, remote ports and remote port private data is upheld in the following manner. struct instance (i.e. variable name) -------------------------------------------------- fc_lport lport fc_rport rport fc_rport_libfc_priv rpriv fc_rport_priv rdata I also renamed dns_rp and ptp_rp to dns_rdata and ptp_rdata respectively. I used emacs 'indent-region' and 'tabify' on all libfc files to correct spacing alignments. I feel sorry for anyone attempting to review this patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc, fcoe: Add FC passthrough supportSteve Ma
This is the Open-FCoE implementation of the FC passthrough support via bsg interface. Passthrough support is added to both N_Ports and VN_Ports. Signed-off-by: Steve Ma <steve.ma@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: Export FC headersRobert Love
Export fc_els.h, fc_fs.h, fc_gs.h and fc_ns.h so that they may be used by applications. This will be needed for FC Passthrough applications like fcping, but could be used by other applications. Fix to include <linux/types.h> to exported files provided by Chris Leech <christopher.leech@intel.com>. Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: Register Symbolic Port Name (RSPN_ID)Chris Leech
Register the fc_host symbolic name as the symbolic port name with the fabric name server. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-12-04[SCSI] libfc: Register Symbolic Node Name (RSNN_NN)Chris Leech
Register the fc_host symbolic name as the symbolic node name with the fabric name server. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>