Age | Commit message (Collapse) | Author |
|
With commit 044e6e3d74a3: "ext4: don't update checksum of new
initialized bitmaps" the buffer valid bit will get set without
actually setting up the checksum for the allocation bitmap, since the
checksum will get calculated once we actually allocate an inode or
block.
If we are doing this, then we need to (re-)check the verified bit
after we take the block group lock. Otherwise, we could race with
another process reading and verifying the bitmap, which would then
complain about the checksum being invalid.
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1780137
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
Failure of ->open() should *not* be followed by fput(). Fixed by
using filp_clone_open(), which gets the cleanups right.
Cc: stable@vger.kernel.org
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The inline data code was updating the raw inode directly; this is
problematic since if metadata checksums are enabled,
ext4_mark_inode_dirty() must be called to update the inode's checksum.
In addition, the jbd2 layer requires that get_write_access() be called
before the metadata buffer is modified. Fix both of these problems.
https://bugzilla.kernel.org/show_bug.cgi?id=200443
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
Previously, when an MMP-protected file system is remounted read-only,
the kmmpd thread would exit the next time it woke up (a few seconds
later), without resetting the MMP sequence number back to
EXT4_MMP_SEQ_CLEAN.
Fix this by explicitly killing the MMP thread when the file system is
remounted read-only.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
|
|
Ext4_check_descriptors() was getting called before s_gdb_count was
initialized. So for file systems w/o the meta_bg feature, allocation
bitmaps could overlap the block group descriptors and ext4 wouldn't
notice.
For file systems with the meta_bg feature enabled, there was a
fencepost error which would cause the ext4_check_descriptors() to
incorrectly believe that the block allocation bitmap overlaps with the
block group descriptor blocks, and it would reject the mount.
Fix both of these problems.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Bug fixes for ext4; most of which relate to vulnerabilities where a
maliciously crafted file system image can result in a kernel OOPS or
hang.
At least one fix addresses an inline data bug could be triggered by
userspace without the need of a crafted file system (although it does
require that the inline data feature be enabled)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: check superblock mapped prior to committing
ext4: add more mount time checks of the superblock
ext4: add more inode number paranoia checks
ext4: avoid running out of journal credits when appending to an inline file
jbd2: don't mark block as modified if the handle is out of credits
ext4: never move the system.data xattr out of the inode body
ext4: clear i_data in ext4_inode_info when removing inline data
ext4: include the illegal physical block in the bad map ext4_error msg
ext4: verify the depth of extent tree in ext4_find_extent()
ext4: only look at the bg_flags field if it is valid
ext4: make sure bitmaps and the inode table don't overlap with bg descriptors
ext4: always check block group bounds in ext4_init_block_bitmap()
ext4: always verify the magic number in xattr blocks
ext4: add corruption check in ext4_xattr_set_entry()
ext4: add warn_on_error mount option
|
|
Pull cifs fixes from Steve French:
"Five smb3/cifs fixes for stable (including for some leaks and memory
overwrites) and also a few fixes for recent regressions in packet
signing.
Additional testing at the recent SMB3 test event, and some good work
by Paulo and others spotted the issues fixed here. In addition to my
xfstest runs on these, Aurelien and Stefano did additional test runs
to verify this set"
* tag '4.18-rc3-smb3fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix stack out-of-bounds in smb{2,3}_create_lease_buf()
cifs: Fix infinite loop when using hard mount option
cifs: Fix slab-out-of-bounds in send_set_info() on SMB2 ACE setting
cifs: Fix memory leak in smb2_set_ea()
cifs: fix SMB1 breakage
cifs: Fix validation of signed data in smb2
cifs: Fix validation of signed data in smb3+
cifs: Fix use after free of a mid_q_entry
|
|
sgid directories have special semantics, making newly created files in
the directory belong to the group of the directory, and newly created
subdirectories will also become sgid. This is historically used for
group-shared directories.
But group directories writable by non-group members should not imply
that such non-group members can magically join the group, so make sure
to clear the sgid bit on non-directories for non-members (but remember
that sgid without group execute means "mandatory locking", just to
confuse things even more).
Reported-by: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
smb{2,3}_create_lease_buf() store a lease key in the lease
context for later usage on a lease break.
In most paths, the key is currently sourced from data that
happens to be on the stack near local variables for oplock in
SMB2_open() callers, e.g. from open_shroot(), whereas
smb2_open_file() properly allocates space on its stack for it.
The address of those local variables holding the oplock is then
passed to create_lease_buf handlers via SMB2_open(), and 16
bytes near oplock are used. This causes a stack out-of-bounds
access as reported by KASAN on SMB2.1 and SMB3 mounts (first
out-of-bounds access is shown here):
[ 111.528823] BUG: KASAN: stack-out-of-bounds in smb3_create_lease_buf+0x399/0x3b0 [cifs]
[ 111.530815] Read of size 8 at addr ffff88010829f249 by task mount.cifs/985
[ 111.532838] CPU: 3 PID: 985 Comm: mount.cifs Not tainted 4.18.0-rc3+ #91
[ 111.534656] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 111.536838] Call Trace:
[ 111.537528] dump_stack+0xc2/0x16b
[ 111.540890] print_address_description+0x6a/0x270
[ 111.542185] kasan_report+0x258/0x380
[ 111.544701] smb3_create_lease_buf+0x399/0x3b0 [cifs]
[ 111.546134] SMB2_open+0x1ef8/0x4b70 [cifs]
[ 111.575883] open_shroot+0x339/0x550 [cifs]
[ 111.591969] smb3_qfs_tcon+0x32c/0x1e60 [cifs]
[ 111.617405] cifs_mount+0x4f3/0x2fc0 [cifs]
[ 111.674332] cifs_smb3_do_mount+0x263/0xf10 [cifs]
[ 111.677915] mount_fs+0x55/0x2b0
[ 111.679504] vfs_kern_mount.part.22+0xaa/0x430
[ 111.684511] do_mount+0xc40/0x2660
[ 111.698301] ksys_mount+0x80/0xd0
[ 111.701541] do_syscall_64+0x14e/0x4b0
[ 111.711807] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 111.713665] RIP: 0033:0x7f372385b5fa
[ 111.715311] Code: 48 8b 0d 99 78 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 66 78 2c 00 f7 d8 64 89 01 48
[ 111.720330] RSP: 002b:00007ffff27049d8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5
[ 111.722601] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f372385b5fa
[ 111.724842] RDX: 000055c2ecdc73b2 RSI: 000055c2ecdc73f9 RDI: 00007ffff270580f
[ 111.727083] RBP: 00007ffff2705804 R08: 000055c2ee976060 R09: 0000000000001000
[ 111.729319] R10: 0000000000000000 R11: 0000000000000206 R12: 00007f3723f4d000
[ 111.731615] R13: 000055c2ee976060 R14: 00007f3723f4f90f R15: 0000000000000000
[ 111.735448] The buggy address belongs to the page:
[ 111.737420] page:ffffea000420a7c0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
[ 111.739890] flags: 0x17ffffc0000000()
[ 111.741750] raw: 0017ffffc0000000 0000000000000000 dead000000000200 0000000000000000
[ 111.744216] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
[ 111.746679] page dumped because: kasan: bad access detected
[ 111.750482] Memory state around the buggy address:
[ 111.752562] ffff88010829f100: 00 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 00
[ 111.754991] ffff88010829f180: 00 00 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00
[ 111.757401] >ffff88010829f200: 00 00 00 00 00 f1 f1 f1 f1 01 f2 f2 f2 f2 f2 f2
[ 111.759801] ^
[ 111.762034] ffff88010829f280: f2 02 f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 00 00
[ 111.764486] ffff88010829f300: f2 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 111.766913] ==================================================================
Lease keys are however already generated and stored in fid data
on open and create paths: pass them down to the lease context
creation handlers and use them.
Suggested-by: Aurélien Aptel <aaptel@suse.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Fixes: b8c32dbb0deb ("CIFS: Request SMB2.1 leases")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.
So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.
Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().
Here's an example of how to trigger that:
$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard
(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f
/mnt/test
$ kill -9 2511
(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f
/mnt/test
By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
A "small" CIFS buffer is not big enough in general to hold a
setacl request for SMB2, and we end up overflowing the buffer in
send_set_info(). For instance:
# mount.cifs //127.0.0.1/test /mnt/test -o username=test,password=test,nounix,cifsacl
# touch /mnt/test/acltest
# getcifsacl /mnt/test/acltest
REVISION:0x1
CONTROL:0x9004
OWNER:S-1-5-21-2926364953-924364008-418108241-1000
GROUP:S-1-22-2-1001
ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
ACL:S-1-22-2-1001:ALLOWED/0x0/R
ACL:S-1-22-2-1001:ALLOWED/0x0/R
ACL:S-1-5-21-2926364953-924364008-418108241-1000:ALLOWED/0x0/0x1e01ff
ACL:S-1-1-0:ALLOWED/0x0/R
# setcifsacl -a "ACL:S-1-22-2-1004:ALLOWED/0x0/R" /mnt/test/acltest
this setacl will cause the following KASAN splat:
[ 330.777927] BUG: KASAN: slab-out-of-bounds in send_set_info+0x4dd/0xc20 [cifs]
[ 330.779696] Write of size 696 at addr ffff88010d5e2860 by task setcifsacl/1012
[ 330.781882] CPU: 1 PID: 1012 Comm: setcifsacl Not tainted 4.18.0-rc2+ #2
[ 330.783140] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[ 330.784395] Call Trace:
[ 330.784789] dump_stack+0xc2/0x16b
[ 330.786777] print_address_description+0x6a/0x270
[ 330.787520] kasan_report+0x258/0x380
[ 330.788845] memcpy+0x34/0x50
[ 330.789369] send_set_info+0x4dd/0xc20 [cifs]
[ 330.799511] SMB2_set_acl+0x76/0xa0 [cifs]
[ 330.801395] set_smb2_acl+0x7ac/0xf30 [cifs]
[ 330.830888] cifs_xattr_set+0x963/0xe40 [cifs]
[ 330.840367] __vfs_setxattr+0x84/0xb0
[ 330.842060] __vfs_setxattr_noperm+0xe6/0x370
[ 330.843848] vfs_setxattr+0xc2/0xd0
[ 330.845519] setxattr+0x258/0x320
[ 330.859211] path_setxattr+0x15b/0x1b0
[ 330.864392] __x64_sys_setxattr+0xc0/0x160
[ 330.866133] do_syscall_64+0x14e/0x4b0
[ 330.876631] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 330.878503] RIP: 0033:0x7ff2e507db0a
[ 330.880151] Code: 48 8b 0d 89 93 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 bc 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 56 93 2c 00 f7 d8 64 89 01 48
[ 330.885358] RSP: 002b:00007ffdc4903c18 EFLAGS: 00000246 ORIG_RAX: 00000000000000bc
[ 330.887733] RAX: ffffffffffffffda RBX: 000055d1170de140 RCX: 00007ff2e507db0a
[ 330.890067] RDX: 000055d1170de7d0 RSI: 000055d115b39184 RDI: 00007ffdc4904818
[ 330.892410] RBP: 0000000000000001 R08: 0000000000000000 R09: 000055d1170de7e4
[ 330.894785] R10: 00000000000002b8 R11: 0000000000000246 R12: 0000000000000007
[ 330.897148] R13: 000055d1170de0c0 R14: 0000000000000008 R15: 000055d1170de550
[ 330.901057] Allocated by task 1012:
[ 330.902888] kasan_kmalloc+0xa0/0xd0
[ 330.904714] kmem_cache_alloc+0xc8/0x1d0
[ 330.906615] mempool_alloc+0x11e/0x380
[ 330.908496] cifs_small_buf_get+0x35/0x60 [cifs]
[ 330.910510] smb2_plain_req_init+0x4a/0xd60 [cifs]
[ 330.912551] send_set_info+0x198/0xc20 [cifs]
[ 330.914535] SMB2_set_acl+0x76/0xa0 [cifs]
[ 330.916465] set_smb2_acl+0x7ac/0xf30 [cifs]
[ 330.918453] cifs_xattr_set+0x963/0xe40 [cifs]
[ 330.920426] __vfs_setxattr+0x84/0xb0
[ 330.922284] __vfs_setxattr_noperm+0xe6/0x370
[ 330.924213] vfs_setxattr+0xc2/0xd0
[ 330.926008] setxattr+0x258/0x320
[ 330.927762] path_setxattr+0x15b/0x1b0
[ 330.929592] __x64_sys_setxattr+0xc0/0x160
[ 330.931459] do_syscall_64+0x14e/0x4b0
[ 330.933314] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 330.936843] Freed by task 0:
[ 330.938588] (stack is not available)
[ 330.941886] The buggy address belongs to the object at ffff88010d5e2800
which belongs to the cache cifs_small_rq of size 448
[ 330.946362] The buggy address is located 96 bytes inside of
448-byte region [ffff88010d5e2800, ffff88010d5e29c0)
[ 330.950722] The buggy address belongs to the page:
[ 330.952789] page:ffffea0004357880 count:1 mapcount:0 mapping:ffff880108fdca80 index:0x0 compound_mapcount: 0
[ 330.955665] flags: 0x17ffffc0008100(slab|head)
[ 330.957760] raw: 0017ffffc0008100 dead000000000100 dead000000000200 ffff880108fdca80
[ 330.960356] raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
[ 330.963005] page dumped because: kasan: bad access detected
[ 330.967039] Memory state around the buggy address:
[ 330.969255] ffff88010d5e2880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 330.971833] ffff88010d5e2900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[ 330.974397] >ffff88010d5e2980: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
[ 330.976956] ^
[ 330.979226] ffff88010d5e2a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 330.981755] ffff88010d5e2a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 330.984225] ==================================================================
Fix this by allocating a regular CIFS buffer in
smb2_plain_req_init() if the request command is SMB2_SET_INFO.
Reported-by: Jianhong Yin <jiyin@redhat.com>
Fixes: 366ed846df60 ("cifs: Use smb 2 - 3 and cifsacl mount options setacl function")
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-and-tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
This patch fixes a memory leak when doing a setxattr(2) in SMB2+.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
|
|
SMB1 mounting broke in commit 35e2cc1ba755
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1
Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack")
We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.
Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Fixes: c713c8770fa5 ("cifs: push rfc1002 generation down the stack")
We failed to validate signed data returned by the server because
__cifs_calc_signature() now expects to sign the actual data in iov but
we were also passing down the rfc1002 length.
Fix smb3_calc_signature() to calculate signature of rfc1002 length prior
to passing only the actual data iov[1-N] to __cifs_calc_signature(). In
addition, there are a few cases where no rfc1002 length is passed so we
make sure there's one (iov_len == 4).
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
It turns out that systemd has a bug: it wants to load the autofs module
early because of some initialization ordering with udev, and it doesn't
do that correctly. Everywhere else it does the proper "look up module
name" that does the proper alias resolution, but in that early code, it
just uses a hardcoded "autofs4" for the module name.
The result of that is that as of commit a2225d931f75 ("autofs: remove
left-over autofs4 stubs"), you get
systemd[1]: Failed to insert module 'autofs4': No such file or directory
in the system logs, and a lack of module loading. All this despite the
fact that we had very clearly marked 'autofs4' as an alias for this
module.
What's so ridiculous about this is that literally everything else does
the module alias handling correctly, including really old versions of
systemd (that just used 'modprobe' to do this), and even all the other
systemd module loading code.
Only that special systemd early module load code is broken, hardcoding
the module names for not just 'autofs4', but also "ipv6", "unix",
"ip_tables" and "virtio_rng". Very annoying.
Instead of creating an _additional_ separate compatibility 'autofs4'
module, just rely on the fact that everybody else gets this right, and
just call the module 'autofs4' for compatibility reasons, with 'autofs'
as the alias name.
That will allow the systemd people to fix their bugs, adding the proper
alias handling, and maybe even fix the name of the module to be just
"autofs" (so that they can _test_ the alias handling). And eventually,
we can revert this silly compatibility hack.
See also
https://github.com/systemd/systemd/issues/9501
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=902946
for the systemd bug reports upstream and in the Debian bug tracker
respectively.
Fixes: a2225d931f75 ("autofs: remove left-over autofs4 stubs")
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Reported-by: Michael Biebl <biebl@debian.org>
Cc: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions. Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.
Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com
Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch attempts to close a hole leading to a BUG seen with hot
removals during writes [1].
A block device (NVME namespace in this test case) is formatted to EXT4
without partitions. It's mounted and write I/O is run to a file, then
the device is hot removed from the slot. The superblock attempts to be
written to the drive which is no longer present.
The typical chain of events leading to the BUG:
ext4_commit_super()
__sync_dirty_buffer()
submit_bh()
submit_bh_wbc()
BUG_ON(!buffer_mapped(bh));
This fix checks for the superblock's buffer head being mapped prior to
syncing.
[1] https://www.spinics.net/lists/linux-ext4/msg56527.html
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regression fixes for qgroup rescan status tracking and
the vm_fault_t conversion that mixed up the error values"
* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix mount failure when qgroup rescan is in progress
Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf
|
|
Pull vfs fix from Al Viro:
"Followup to procfs-seq_file series this window"
This fixes a memory leak by making sure that proc seq files release any
private data on close. The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
proc: add proc_seq_release
|
|
Pull ceph fix from Ilya Dryomov:
"A trivial dentry leak fix from Zheng"
* tag 'ceph-for-4.18-rc3' of git://github.com/ceph/ceph-client:
ceph: fix dentry leak in splice_dentry()
|
|
The poll() changes were not well thought out, and completely
unexplained. They also caused a huge performance regression, because
"->poll()" was no longer a trivial file operation that just called down
to the underlying file operations, but instead did at least two indirect
calls.
Indirect calls are sadly slow now with the Spectre mitigation, but the
performance problem could at least be largely mitigated by changing the
"->get_poll_head()" operation to just have a per-file-descriptor pointer
to the poll head instead. That gets rid of one of the new indirections.
But that doesn't fix the new complexity that is completely unwarranted
for the regular case. The (undocumented) reason for the poll() changes
was some alleged AIO poll race fixing, but we don't make the common case
slower and more complex for some uncommon special case, so this all
really needs way more explanations and most likely a fundamental
redesign.
[ This revert is a revert of about 30 different commits, not reverted
individually because that would just be unnecessarily messy - Linus ]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Make sure we initialize *bno and *len, before jumping to out_bad_rec
label, and risk calling xfs_warn() with uninitialized variables.
Coverity: 100898
Coverity: 1437081
Coverity: 1437129
Coverity: 1437191
Coverity: 1437201
Coverity: 1437212
Coverity: 1437341
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
If a power failure happens while the qgroup rescan kthread is running,
the next mount operation will always fail. This is because of a recent
regression that makes qgroup_rescan_init() incorrectly return -EINVAL
when we are mounting the filesystem (through btrfs_read_qgroup_config()).
This causes the -EINVAL error to be returned regardless of any qgroup
flags being set instead of returning the error only when neither of
the flags BTRFS_QGROUP_STATUS_FLAG_RESCAN nor BTRFS_QGROUP_STATUS_FLAG_ON
are set.
A test case for fstests follows up soon.
Fixes: 9593bf49675e ("btrfs: qgroup: show more meaningful qgroup_rescan_init error message")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The vm_fault_t conversion commit introduced a ret2 variable for tracking
the integer return values from internal btrfs functions. It was
sometimes returning VM_FAULT_LOCKED for pages that were actually invalid
and had been removed from the radix. Something like this:
ret2 = btrfs_delalloc_reserve_space() // returns zero on success
lock_page(page)
if (page->mapping != inode->i_mapping)
goto out_unlock;
...
out_unlock:
if (!ret2) {
...
return VM_FAULT_LOCKED;
}
This ends up triggering this WARNING in btrfs_destroy_inode()
WARN_ON(BTRFS_I(inode)->block_rsv.size);
xfstests generic/095 was able to reliably reproduce the errors.
Since out_unlock: is only used for errors, this fix moves it below the
if (!ret2) check we use to return VM_FAULT_LOCKED for success.
Fixes: a528a2415087 (btrfs: change return type of btrfs_page_mkwrite to vm_fault_t)
Signed-off-by: Chris Mason <clm@fb.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf
of extent tree") added a new exit for rescan finish.
However after finishing quota rescan, we set
fs_info->qgroup_rescan_progress to (u64)-1 before we exit through the
original exit path.
While we missed that assignment of (u64)-1 in the new exit path.
The end result is, the quota status item doesn't have the same value.
(-1 vs the last bytenr + 1)
Although it doesn't affect quota accounting, it's still better to keep
the original behavior.
Reported-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Fixes: ff3d27a048d9 ("btrfs: qgroup: Finish rescan when hit the last leaf of extent tree")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
kmemleak reported some memory leak on reading proc files. After adding
some debug lines, find that proc_seq_fops is using seq_release as
release handler, which won't handle the free of 'private' field of
seq_file, while in fact the open handler proc_seq_open could create
the private data with __seq_open_private when state_size is greater
than zero. So after reading files created with proc_create_seq_private,
such as /proc/timer_list and /proc/vmallocinfo, the private mem of a
seq_file is not freed. Fix it by adding the paired proc_seq_release
as the default release handler of proc_seq_ops instead of seq_release.
Fixes: 44414d82cfe0 ("proc: introduce proc_create_seq_private")
Reviewed-by: Christoph Hellwig <hch@lst.de>
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Pull xfs fixes from Darrick Wong:
"Here are some patches for 4.18 to fix regressions, accounting
problems, overflow problems, and to strengthen metadata validation to
prevent corruption.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Changes since last update:
- more metadata validation strengthening to prevent crashes.
- fix extent offset overflow problem when insert_range on a 512b
block fs
- fix some off-by-one errors in the realtime fsmap code
- fix some math errors in the default resblks calculation when free
space is low
- fix a problem where stale page contents are exposed via mmap read
after a zero_range at eof
- fix accounting problems with per-ag reservations causing statfs
reports to vary incorrectly"
* tag 'xfs-4.18-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix fdblocks accounting w/ RMAPBT per-AG reservation
xfs: ensure post-EOF zeroing happens after zeroing part of a file
xfs: fix off-by-one error in xfs_rtalloc_query_range
xfs: fix uninitialized field in rtbitmap fsmap backend
xfs: recheck reflink state after grabbing ILOCK_SHARED for a write
xfs: don't allow insert-range to shift extents past the maximum offset
xfs: don't trip over negative free space in xfs_reserve_blocks
xfs: allow empty transactions while frozen
xfs: xfs_iflush_abort() can be called twice on cluster writeback failure
xfs: More robust inode extent count validation
xfs: simplify xfs_bmap_punch_delalloc_range
|
|
In any case, d_splice_alias() does not drop reference of original
dentry.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes and an incorrect error value propagation fix from
'rename exchange'"
* tag 'for-4.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: fix return value on rename exchange failure
btrfs: fix invalid-free in btrfs_extent_same
Btrfs: fix physical offset reported by fiemap for inline extents
|
|
In __xfs_ag_resv_init we incorrectly calculate the amount by which to
decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt
allocations do not decrease fdblocks, we must decrease fdblocks by the
entire size of the requested reservation in order to achieve our goal of
always having enough free blocks to satisfy an rmapbt expansion.
This is in contrast to the refcountbt/finobt, which /do/ subtract from
fdblocks whenever they allocate a block. For this allocation type we
preserve the existing behavior where we decrease fdblocks only by the
requested reservation minus the size of the existing tree.
This fixes the problem where the available block counts reported by
statfs change across a remount if there had been an rmapbt size change
since mount time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
If a user asks us to zero_range part of a file, the end of the range is
EOF, and not aligned to a page boundary, invoke writeback of the EOF
page to ensure that the post-EOF part of the page is zeroed. This
ensures that we don't expose stale memory contents via mmap, if in a
clumsy manner.
Found by running generic/127 when it runs zero_range and mapread at EOF
one after the other.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
In commit 8ad560d2565e6 ("xfs: strengthen rtalloc query range checks")
we strengthened the input parameter checks in the rtbitmap range query
function, but introduced an off-by-one error in the process. The call
to xfs_rtfind_forw deals with the high key being rextents, but we clamp
the high key to rextents - 1. This causes the returned results to stop
one block short of the end of the rtdev, which is incorrect.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Initialize the extent count field of the high key so that when we use
the high key to synthesize an 'unknown owner' record (i.e. used space
record) at the end of the queried range we have a field with which to
compute rm_blockcount. This is not strictly necessary because the
synthesizer never uses the rm_blockcount field, but we can shut up the
static code analysis anyway.
Coverity-id: 1437358
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The reflink iflag could have changed since the earlier unlocked check,
so if we got ILOCK_SHARED for a write and but we're now a reflink inode
we have to switch to ILOCK_EXCL and relock.
This helps us avoid blowing lock assertions in things like generic/166:
XFS: Assertion failed: xfs_isilocked(ip, XFS_ILOCK_EXCL), file: fs/xfs/xfs_reflink.c, line: 383
WARNING: CPU: 1 PID: 24707 at fs/xfs/xfs_message.c:104 assfail+0x25/0x30 [xfs]
Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug]
CPU: 1 PID: 24707 Comm: xfs_io Not tainted 4.18.0-rc1-djw #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:assfail+0x25/0x30 [xfs]
Code: ff 0f 0b c3 90 66 66 66 66 90 48 89 f1 41 89 d0 48 c7 c6 e8 ef 1b a0 48 89 fa 31 ff e8 54 f9 ff ff 80 3d fd ba 0f 00 00 75 03 <0f> 0b c3 0f 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 63 f6 49 89 f9
RSP: 0018:ffffc90006423ad8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880030b65e80 RCX: 0000000000000000
RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa01b0447
RBP: ffffc90006423c10 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88003d43fc30 R11: f000000000000000 R12: ffff880077cda000
R13: 0000000000000000 R14: ffffc90006423c30 R15: ffffc90006423bf9
FS: 00007feba8986800(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000138ab58 CR3: 000000003d40a000 CR4: 00000000000006a0
Call Trace:
xfs_reflink_allocate_cow+0x24c/0x3d0 [xfs]
xfs_file_iomap_begin+0x6d2/0xeb0 [xfs]
? iomap_to_fiemap+0x80/0x80
iomap_apply+0x5e/0x130
iomap_dio_rw+0x2e0/0x400
? iomap_to_fiemap+0x80/0x80
? xfs_file_dio_aio_write+0x133/0x4a0 [xfs]
xfs_file_dio_aio_write+0x133/0x4a0 [xfs]
xfs_file_write_iter+0x7b/0xb0 [xfs]
__vfs_write+0x16f/0x1f0
vfs_write+0xc8/0x1c0
ksys_pwrite64+0x74/0x90
do_syscall_64+0x56/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Zorro Lang reports that generic/485 blows an assert on a filesystem with
512 byte blocks. The test tries to fallocate a post-eof extent at the
maximum file size and calls insert range to shift the extents right by
two blocks. On a 512b block filesystem this causes startoff to overflow
the 54-bit startoff field, leading to the assert.
Therefore, always check the rightmost extent to see if it would overflow
prior to invoking the insert range machinery.
Reported-by: zlang@redhat.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If we somehow end up with a filesystem that has fewer free blocks than
the blocks set aside to avoid ENOSPC deadlocks, it's possible that the
free space calculation in xfs_reserve_blocks will spit out a negative
number (because percpu_counter_sum returns s64). We fail to notice
this negative number and set fdblks_delta to it. Now we increment
fdblocks(!) and the unsigned type of m_resblks means that we end up
setting a ridiculously huge m_resblks reservation.
Avoid this comedy of errors by detecting the negative free space and
returning -ENOSPC.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In commit e89c041338ed6ef ("xfs: implement the GETFSMAP ioctl") we
created the ability to obtain empty transactions. These transactions
have no log or block reservations and therefore can't modify anything.
Since they're also NO_WRITECOUNT they can run while the fs is frozen,
so we don't need to WARN_ON about that usage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If we failed during a rename exchange operation after starting/joining a
transaction, we would end up replacing the return value, stored in the
local 'ret' variable, with the return value from btrfs_end_transaction().
So this could end up returning 0 (success) to user space despite the
operation having failed and aborted the transaction, because if there are
multiple tasks having a reference on the transaction at the time
btrfs_end_transaction() is called by the rename exchange, that function
returns 0 (otherwise it returns -EIO and not the original error value).
So fix this by not overwriting the return value on error after getting
a transaction handle.
Fixes: cdd1fedf8261 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf, quota, ext2 fixes from Jan Kara:
"UDF:
- fix an oops due to corrupted disk image
- two small cleanups
quota:
- a fixfor lru handling
- cleanup
ext2:
- a warning about a deprecated mount option"
* tag 'for_v4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Drop unused arguments of udf_delete_aext()
udf: Provide function for calculating dir entry length
udf: Detect incorrect directory size
ext2: add warning when specifying nocheck option
quota: Cleanup list iteration in dqcache_shrink_scan()
quota: reclaim least recently used dquots
|
|
When a corrupt inode is detected during xfs_iflush_cluster, we can
get a shutdown ASSERT failure like this:
XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116
XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9
XFS (pmem1): Please umount the filesystem and rectify the problem(s)
XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258
.....
Call Trace:
xfs_iflush_abort+0x10a/0x110
xfs_iflush+0xf3/0x390
xfs_inode_item_push+0x126/0x1e0
xfsaild+0x2c5/0x890
kthread+0x11c/0x140
ret_from_fork+0x24/0x30
Essentially, xfs_iflush_abort() has been called twice on the
original inode that that was flushed. This happens because the
inode has been flushed to teh buffer successfully via
xfs_iflush_int(), and so when another inode is detected as corrupt
in xfs_iflush_cluster, the buffer is marked stale and EIO, and
iodone callbacks are run on it.
Running the iodone callbacks walks across the original inode and
calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns
to xfs_iflush(), it runs the error path for that function, and that
calls xfs_iflush_abort() on the inode a second time, leading to the
above assert failure as the inode is not flush locked anymore.
This bug has been there a long time.
The simple fix would be to just avoid calling xfs_iflush_abort() in
xfs_iflush() if we've got a failure from xfs_iflush_cluster().
However, xfs_iflush_cluster() has magic delwri buffer handling that
means it may or may not have run IO completion on the buffer, and
hence sometimes we have to call xfs_iflush_abort() from
xfs_iflush(), and sometimes we shouldn't.
After reading through all the error paths and the delwri buffer
code, it's clear that the error handling in xfs_iflush_cluster() is
unnecessary. If the buffer is delwri, it leaves it on the delwri
list so that when the delwri list is submitted it sees a shutdown
fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO
and runs IO completion. i.e. exactly what xfs+iflush_cluster() does
when it's not a delwri buffer. Further, marking a buffer stale
clears the _XBF_DELWRI_Q flag on the buffer, which means when
submission of the buffer occurs, it just skips over it and releases
it.
IOWs, the error handling in xfs_iflush_cluster doesn't need to care
if the buffer is already on a the delwri queue or not - it just
needs to mark the buffer stale, EIO and run completions. That means
we can just use the easy fix for xfs_iflush() to avoid the double
abort.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When the inode is in extent format, it can't have more extents that
fit in the inode fork. We don't currenty check this, and so this
corruption goes unnoticed by the inode verifiers. This can lead to
crashes operating on invalid in-memory structures.
Attempts to access such a inode will now error out in the verifier
rather than allowing modification operations to proceed.
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a typedef, add some braces and breaks to shut up compiler warnings]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Instead of using xfs_bmapi_read to find delalloc extents and then punch
them out using xfs_bunmapi, opencode the loop to iterate over the extents
and call xfs_bmap_del_extent_delay directly. This both simplifies the
code and reduces the number of extent tree lookups required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Pull NFS client bugfixes from Trond Myklebust:
"Hightlights include:
- fix an rcu deadlock in nfs_delegation_find_inode()
- fix NFSv4 deadlocks due to not freeing the session slot in
layoutget
- don't send layoutreturn if the layout is already invalid
- prevent duplicate XID allocation
- flexfiles: Don't tie up all the rpciod threads in resends"
* tag 'nfs-for-4.18-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
pNFS/flexfiles: Process writeback resends from nfsiod context as well
pNFS/flexfiles: Don't tie up all the rpciod threads in resends
sunrpc: Prevent duplicate XID allocation
pNFS: Don't send layoutreturn if the layout is already invalid
pNFS: Always free the session slot on error in nfs4_layoutget_handle_exception
NFS: Fix an rcu deadlock in nfs_delegation_find_inode()
|
|
If this condition ((BTRFS_I(src)->flags & BTR |