summaryrefslogtreecommitdiffstats
path: root/fs
AgeCommit message (Collapse)Author
2013-11-14Merge tag 'for-linus-20131112' of git://git.infradead.org/linux-mtdLinus Torvalds
Pull MTD changes from Brian Norris: - Unify some compile-time differences so that we have fewer uses of #ifdef CONFIG_OF in atmel_nand - Other general cleanups (removing unused functions, options, variables, fields; use correct interfaces) - Fix BUG() for new odd-sized NAND, which report non-power-of-2 dimensions via ONFI - Miscellaneous driver fixes (SPI NOR flash; BCM47xx NAND flash; etc.) - Improve differentiation between SLC and MLC NAND -- this clarifies an ABI issue regarding the MTD "type" (in sysfs and in the MEMGETINFO ioctl), where the MTD_MLCNANDFLASH type was present but inconsistently used - Extend GPMI NAND to support multi-chip-select NAND for some platforms - Many improvements to the OMAP2/3 NAND driver, including an expanded DT binding to bring us closer to mainline support for some OMAP systems - Fix a deadlock in the error path of the Atmel NAND driver probe - Correct the error codes from MTD mmap() to conform to POSIX and the Linux Programmer's Manual. This is an acknowledged change in the MTD ABI, but I can't imagine somebody relying on the non-standard -ENOSYS error code specifically. Am I just being unimaginative? :) - Fix a few important GPMI NAND bugs (one regression from 3.12 and one long-standing race condition) - More? Read the log! * tag 'for-linus-20131112' of git://git.infradead.org/linux-mtd: (98 commits) mtd: gpmi: fix the NULL pointer mtd: gpmi: fix kernel BUG due to racing DMA operations mtd: mtdchar: return expected errors on mmap() call mtd: gpmi: only scan two chips for imx6 mtd: gpmi: Use devm_kzalloc() mtd: atmel_nand: fix bug driver will in a dead lock if no nand detected mtd: nand: use a local variable to simplify the nand_scan_tail mtd: nand: remove deprecated IRQF_DISABLED mtd: dataflash: Say if we find a device we don't support mtd: nand: omap: fix error return code in omap_nand_probe() mtd: nand_bbt: kill NAND_BBT_SCANALLPAGES mtd: m25p80: fixup device removal failure path mtd: mxc_nand: Include linux/of.h header mtd: remove duplicated include from mtdcore.c mtd: m25p80: add support for Macronix mx25l3255e mtd: nand: omap: remove selection of BCH ecc-scheme via KConfig mtd: nand: omap: updated devm_xx for all resource allocation and free calls mtd: nand: omap: use drivers/mtd/nand/nand_bch.c wrapper for BCH ECC instead of lib/bch.c mtd: nand: omap: clean-up ecc layout for BCH ecc schemes mtd: nand: omap2: clean-up BCHx_HW and BCHx_SW ECC configurations in device_probe ...
2013-11-14Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO core updates from Jens Axboe: "This is the pull request for the core changes in the block layer for 3.13. It contains: - The new blk-mq request interface. This is a new and more scalable queueing model that marries the best part of the request based interface we currently have (which is fully featured, but scales poorly) and the bio based "interface" which the new drivers for high IOPS devices end up using because it's much faster than the request based one. The bio interface has no block layer support, since it taps into the stack much earlier. This means that drivers end up having to implement a lot of functionality on their own, like tagging, timeout handling, requeue, etc. The blk-mq interface provides all these. Some drivers even provide a switch to select bio or rq and has code to handle both, since things like merging only works in the rq model and hence is faster for some workloads. This is a huge mess. Conversion of these drivers nets us a substantial code reduction. Initial results on converting SCSI to this model even shows an 8x improvement on single queue devices. So while the model was intended to work on the newer multiqueue devices, it has substantial improvements for "classic" hardware as well. This code has gone through extensive testing and development, it's now ready to go. A pull request is coming to convert virtio-blk to this model will be will be coming as well, with more drivers scheduled for 3.14 conversion. - Two blktrace fixes from Jan and Chen Gang. - A plug merge fix from Alireza Haghdoost. - Conversion of __get_cpu_var() from Christoph Lameter. - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven. - A fix for a race between request completion and the timeout handling from Jeff Moyer. This is what caused the merge conflict with blk-mq/core, in case you are looking at that. - A dm stacking fix from Mike Snitzer. - A code consolidation fix and duplicated code removal from Kent Overstreet. - A handful of block bug fixes from Mikulas Patocka, fixing a loop crash and memory corruption on blk cg. - Elevator switch bug fix from Tomoki Sekiyama. A heads-up that I had to rebase this branch. Initially the immutable bio_vecs had been queued up for inclusion, but a week later, it became clear that it wasn't fully cooked yet. So the decision was made to pull this out and postpone it until 3.14. It was a straight forward rebase, just pruning out the immutable series and the later fixes of problems with it. The rest of the patches applied directly and no further changes were made" * 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits) block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO block: Do not call sector_div() with a 64-bit divisor kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup() block: Consolidate duplicated bio_trim() implementations block: Use rw_copy_check_uvector() block: Enable sysfs nomerge control for I/O requests in the plug list block: properly stack underlying max_segment_size to DM device elevator: acquire q->sysfs_lock in elevator_change() elevator: Fix a race in elevator switching and md device initialization block: Replace __get_cpu_var uses bdi: test bdi_init failure block: fix a probe argument to blk_register_region loop: fix crash if blk_alloc_queue fails blk-core: Fix memory corruption if blkcg_init_queue fails block: fix race between request completion and timeout handling blktrace: Send BLK_TN_PROCESS events to all running traces blk-mq: don't disallow request merges for req->special being set blk-mq: mq plug list breakage blk-mq: fix for flush deadlock ...
2013-11-13prepend_path() needs to reinitialize dentry/vfsmount/mnt on restartsAl Viro
... and equivalent is needed in 3.12; it's broken there as well Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-13fix unpaired rcu lock in prepend_path()Li Zhong
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-13locks: missing unlock on error in generic_add_lease()Dan Carpenter
We should unlock here before returning. Fixes: df4e8d2c1d2b ('locks: implement delegations') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-13aio: checking for NULL instead of IS_ERRDan Carpenter
alloc_anon_inode() returns an ERR_PTR(), it doesn't return NULL. Fixes: 71ad7490c1f3 ('rework aio migrate pages to use aio fs') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-13Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds
Merge first patch-bomb from Andrew Morton: "Quite a lot of other stuff is banked up awaiting further next->mainline merging, but this batch contains: - Lots of random misc patches - OCFS2 - Most of MM - backlight updates - lib/ updates - printk updates - checkpatch updates - epoll tweaking - rtc updates - hfs - hfsplus - documentation - procfs - update gcov to gcc-4.7 format - IPC" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (269 commits) ipc, msg: fix message length check for negative values ipc/util.c: remove unnecessary work pending test devpts: plug the memory leak in kill_sb ./Makefile: export initial ramdisk compression config option init/Kconfig: add option to disable kernel compression drivers: w1: make w1_slave::flags long to avoid memory corruption drivers/w1/masters/ds1wm.cuse dev_get_platdata() drivers/memstick/core/ms_block.c: fix unreachable state in h_msb_read_page() drivers/memstick/core/mspro_block.c: fix attributes array allocation drivers/pps/clients/pps-gpio.c: remove redundant of_match_ptr kernel/panic.c: reduce 1 byte usage for print tainted buffer gcov: reuse kbasename helper kernel/gcov/fs.c: use pr_warn() kernel/module.c: use pr_foo() gcov: compile specific gcov implementation based on gcc version gcov: add support for gcc 4.7 gcov format gcov: move gcov structs definitions to a gcc version specific file kernel/taskstats.c: return -ENOMEM when alloc memory fails in add_del_listener() kernel/taskstats.c: add nla_nest_cancel() for failure processing between nla_nest_start() and nla_nest_end() kernel/sysctl_binary.c: use scnprintf() instead of snprintf() ...
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "All kinds of stuff this time around; some more notable parts: - RCU'd vfsmounts handling - new primitives for coredump handling - files_lock is gone - Bruce's delegations handling series - exportfs fixes plus misc stuff all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits) ecryptfs: ->f_op is never NULL locks: break delegations on any attribute modification locks: break delegations on link locks: break delegations on rename locks: helper functions for delegation breaking locks: break delegations on unlink namei: minor vfs_unlink cleanup locks: implement delegations locks: introduce new FL_DELEG lock flag vfs: take i_mutex on renamed file vfs: rename I_MUTEX_QUOTA now that it's not used for quotas vfs: don't use PARENT/CHILD lock classes for non-directories vfs: pull ext4's double-i_mutex-locking into common code exportfs: fix quadratic behavior in filehandle lookup exportfs: better variable name exportfs: move most of reconnect_path to helper function exportfs: eliminate unused "noprogress" counter exportfs: stop retrying once we race with rename/remove exportfs: clear DISCONNECTED on all parents sooner exportfs: more detailed comment for path_reconnect ...
2013-11-13Merge tag 'dlm-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm fix from David Teigland: "This set includes a single fix to resolve to a race that could cause lockspace shutdown to incorrectly return -EBUSY" * tag 'dlm-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: Avoid that dlm_release_lockspace() incorrectly returns -EBUSY
2013-11-13Merge tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull ubifs changes from Artem Bityutskiy: "Mostly fixes for the power cut emulation UBIFS mode, and only one functional change which fixes a return error code" * tag 'upstream-3.13-rc1' of git://git.infradead.org/linux-ubifs: UBIFS: correct data corruption range UBIFS: fix return code UBIFS: remove unnecessary code in ubifs_garbage_collect
2013-11-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: "This adds a ->writepage() implementation to fuse, improving mmaped writeout and paving the way for buffered writeback. And there's a patch to add a fix minor number for /dev/cuse, similarly to /dev/fuse" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: writepages: protect secondary requests from fuse file release fuse: writepages: update bdi writeout when deleting secondary request fuse: writepages: crop secondary requests fuse: writepages: roll back changes if request not found cuse: add fix minor number to /dev/cuse fuse: writepage: skip already in flight fuse: writepages: handle same page rewrites fuse: writepages: fix aggregation fuse: fix race in fuse_writepages() fuse: Implement writepages callback fuse: don't BUG on no write file fuse: lock page in mkwrite fuse: Prepare to handle multiple pages in writeback fuse: Getting file for writeback helper
2013-11-13Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext[23], udf and quota fixes from Jan Kara: "Assorted fixes in quota, ext2, ext3 & udf. Probably the most important is a fix of fs corruption issue in ext2 XIP support (OTOH xip is rarely used)" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: Fix fs corruption in ext2_get_xip_mem() quota: info leak in quota_getquota() jbd: Revert "jbd: remove dependency on __GFP_NOFAIL" udf: fix for pathetic mount times in case of invalid file system ext3: Count journal as bsddf overhead in ext3_statfs
2013-11-13Merge tag 'for-f2fs-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs updates from Jaegeuk Kim: "This patch-set includes the following major enhancement patches. - add a sysfs to control reclaiming free segments - enhance the f2fs global lock procedures - enhance the victim selection flow - wait for selected node blocks during fsync - add some tracepoints - add a config to remove abundant BUG_ONs The other bug fixes are as follows. - fix deadlock on acl operations - fix some bugs with respect to orphan inodes And, there are a bunch of cleanups" * tag 'for-f2fs-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (42 commits) f2fs: issue more large discard command f2fs: fix memory leak after kobject init failed in fill_super f2fs: cleanup waiting routine for writeback pages in cp f2fs: avoid to use a NULL point in destroy_segment_manager f2fs: remove unnecessary TestClearPageError when wait pages writeback f2fs: update f2fs document f2fs: avoid to wait all the node blocks during fsync f2fs: check all ones or zeros bitmap with bitops for better mount performance f2fs: change the method of calculating the number summary blocks f2fs: fix calculating incorrect free size when update xattr in __f2fs_setxattr f2fs: add an option to avoid unnecessary BUG_ONs f2fs: introduce CONFIG_F2FS_CHECK_FS for BUG_ON control f2fs: fix a deadlock during init_acl procedure f2fs: clean up acl flow for better readability f2fs: remove unnecessary segment bitmap updates f2fs: add tracepoint for vm_page_mkwrite f2fs: add tracepoint for set_page_dirty f2fs: remove redundant set_page_dirty from write_compacted_summaries f2fs: add reclaiming control by sysfs f2fs: introduce f2fs_balance_fs_bg for some background jobs ...
2013-11-13devpts: plug the memory leak in kill_sbIlija Hadzic
When devpts is unmounted, there may be a no-longer-used IDR tree hanging off the superblock we are about to kill. This needs to be cleaned up before destroying the SB. The leak is usually not a big deal because unmounting devpts is typically done when shutting down the whole machine. However, shutting down an LXC container instead of a physical machine exposes the problem (the garbage is detectable with kmemleak). Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13exec/ptrace: fix get_dumpable() incorrect testsKees Cook
The get_dumpable() return value is not boolean. Most users of the function actually want to be testing for non-SUID_DUMP_USER(1) rather than SUID_DUMP_DISABLE(0). The SUID_DUMP_ROOT(2) is also considered a protected state. Almost all places did this correctly, excepting the two places fixed in this patch. Wrong logic: if (dumpable == SUID_DUMP_DISABLE) { /* be protective */ } or if (dumpable == 0) { /* be protective */ } or if (!dumpable) { /* be protective */ } Correct logic: if (dumpable != SUID_DUMP_USER) { /* be protective */ } or if (dumpable != 1) { /* be protective */ } Without this patch, if the system had set the sysctl fs/suid_dumpable=2, a user was able to ptrace attach to processes that had dropped privileges to that user. (This may have been partially mitigated if Yama was enabled.) The macros have been moved into the file that declares get/set_dumpable(), which means things like the ia64 code can see them too. CVE-2013-2929 Reported-by: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13kcore: add Kconfig help textRandy Dunlap
Under Pseudo filesystems, /proc/kcore support has no help. Fixes a portion of kernel bugzilla #52671: https://bugzilla.kernel.org/show_bug.cgi?id=52671 Thanks for David Howells for the help text. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: <lailavrazda1979@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13procfs: clean up proc_reg_get_unmapped_area for 80-column limitHATAYAMA Daisuke
Clean up proc_reg_get_unmapped_area due to its 80-column limit violation. Signed-off-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com> Tested-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13hfsplus: implement attributes file creation functionalityVyacheslav Dubeyko
Implement functionality of creation AttributesFile metadata file on HFS+ volume in the case of absence of it. It makes trying to open AttributesFile's B-tree during mount of HFS+ volume. If HFS+ volume hasn't AttributesFile then a pointer on AttributesFile's B-tree keeps as NULL. Thereby, when it is discovered absence of AttributesFile on HFS+ volume in the begin of xattr creation operation then AttributesFile will be created. The creation of AttributesFile will have success in the case of availability (2 * clump) free blocks on HFS+ volume. Otherwise, creation operation is ended with error (-ENOSPC). Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13hfsplus: implement attributes file's header node initialization codeVyacheslav Dubeyko
Implement functionality of AttributesFile's header node initialization. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13hfsplus: add metadata file's clump size calculation functionalityVyacheslav Dubeyko
There are situation when HFS+ volume had been created without AttributesFile. Such situation can take place because of using old mkfs.hfs utility or creation HFS+ volume without taking in mind necessity to use xattrs. For example, Mac OS X 10.4 (Tiger) doesn't create AttributesFile during mkfs phase. Also it is a very frequent situation for the case of users that created HFS+ volumes under Linux. As a result, xattrs and POSIX ACLs on HFS+ volume are unavailable for such users. This patchset implements functionality of AttributesFile creation on HFS+ volume in the case of this metadata file absence during operation of xattr creation. This patch: Add functionality of metadata file's clump size calculation. Operation of AttributesFile creation needs in clump size setting. This value will be used when AttributesFile will be extended. This code is adopted from code of newfs_hfs utility of diskdev_cmds packet http://opensource.apple.com/tarballs/diskdev_cmds/. Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13fs/hfs/btree.h: remove duplicate definesMichael Opdenacker
This patch removes duplicate defines from fs/hfs/btree.h [akpm@linux-foundation.org: retain the comments] Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13epoll: do not take global 'epmutex' for simple topologiesJason Baron
When calling EPOLL_CTL_ADD for an epoll file descriptor that is attached directly to a wakeup source, we do not need to take the global 'epmutex', unless the epoll file descriptor is nested. The purpose of taking the 'epmutex' on add is to prevent complex topologies such as loops and deep wakeup paths from forming in parallel through multiple EPOLL_CTL_ADD operations. However, for the simple case of an epoll file descriptor attached directly to a wakeup source (with no nesting), we do not need to hold the 'epmutex'. This patch along with 'epoll: optimize EPOLL_CTL_DEL using rcu' improves scalability on larger systems. Quoting Nathan Zimmer's mail on SPECjbb performance: "On the 16 socket run the performance went from 35k jOPS to 125k jOPS. In addition the benchmark when from scaling well on 10 sockets to scaling well on just over 40 sockets. ... Currently the benchmark stops scaling at around 40-44 sockets but it seems like I found a second unrelated bottleneck." [akpm@linux-foundation.org: use `bool' for boolean variables, remove unneeded/undesirable cast of void*, add missed ep_scan_ready_list() kerneldoc] Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13epoll: optimize EPOLL_CTL_DEL using rcuJason Baron
Nathan Zimmer found that once we get over 10+ cpus, the scalability of SPECjbb falls over due to the contention on the global 'epmutex', which is taken in on EPOLL_CTL_ADD and EPOLL_CTL_DEL operations. Patch #1 removes the 'epmutex' lock completely from the EPOLL_CTL_DEL path by using rcu to guard against any concurrent traversals. Patch #2 remove the 'epmutex' lock from EPOLL_CTL_ADD operations for simple topologies. IE when adding a link from an epoll file descriptor to a wakeup source, where the epoll file descriptor is not nested. This patch (of 2): Optimize EPOLL_CTL_DEL such that it does not require the 'epmutex' by converting the file->f_ep_links list into an rcu one. In this way, we can traverse the epoll network on the add path in parallel with deletes. Since deletes can't create loops or worse wakeup paths, this is safe. This patch in combination with the patch "epoll: Do not take global 'epmutex' for simple topologies", shows a dramatic performance improvement in scalability for SPECjbb. Signed-off-by: Jason Baron <jbaron@akamai.com> Tested-by: Nathan Zimmer <nzimmer@sgi.com> Cc: Eric Wong <normalperson@yhbt.net> Cc: Nelson Elhage <nelhage@nelhage.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> CC: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13debugfs: use list_next_entry() in debugfs_remove_recursive()Oleg Nesterov
Change debugfs_remove_recursive() to use list_next_entry(child), no changes in generated code. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13cramfs: mark as obsoleteMichael Opdenacker
Who needs cramfs when you have squashfs? At least, we should warn people that cramfs is obsolete. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm: factor commit limit calculationJerome Marchand
The same calculation is currently done in three differents places. Factor that code so future changes has to be made at only one place. [akpm@linux-foundation.org: uninline vm_commit_limit()] Signed-off-by: Jerome Marchand <jmarchan@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13writeback: do not sync data dirtied after sync startJan Kara
When there are processes heavily creating small files while sync(2) is running, it can easily happen that quite some new files are created between WB_SYNC_NONE and WB_SYNC_ALL pass of sync(2). That can happen especially if there are several busy filesystems (remember that sync traverses filesystems sequentially and waits in WB_SYNC_ALL phase on one fs before starting it on another fs). Because WB_SYNC_ALL pass is slow (e.g. causes a transaction commit and cache flush for each inode in ext3), resulting sync(2) times are rather large. The following script reproduces the problem: function run_writers { for (( i = 0; i < 10; i++ )); do mkdir $1/dir$i for (( j = 0; j < 40000; j++ )); do dd if=/dev/zero of=$1/dir$i/$j bs=4k count=4 &>/dev/null done & done } for dir in "$@"; do run_writers $dir done sleep 40 time sync Fix the problem by disregarding inodes dirtied after sync(2) was called in the WB_SYNC_ALL pass. To allow for this, sync_inodes_sb() now takes a time stamp when sync has started which is used for setting up work for flusher threads. To give some numbers, when above script is run on two ext4 filesystems on simple SATA drive, the average sync time from 10 runs is 267.549 seconds with standard deviation 104.799426. With the patched kernel, the average sync time from 10 runs is 2.995 seconds with standard deviation 0.096. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13/proc/pid/smaps: show VM_SOFTDIRTY flag in VmFlags lineNaoya Horiguchi
This flag shows that the VMA is "newly created" and thus represents "dirty" in the task's VM. You can clear it by "echo 4 > /proc/pid/clear_refs." Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Pavel Emelyanov <xemul@parallels.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm, mempolicy: make mpol_to_str robust and always succeedDavid Rientjes
mpol_to_str() should not fail. Currently, it either fails because the string buffer is too small or because a string hasn't been defined for a mempolicy mode. If a new mempolicy mode is introduced and no string is defined for it, just warn and return "unknown". If the buffer is too small, just truncate the string and return, the same behavior as snprintf(). This also fixes a bug where there was no NULL-byte termination when doing *p++ = '=' and *p++ ':' and maxlen has been reached. Signed-off-by: David Rientjes <rientjes@google.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Chen Gang <gang.chen@asianux.com> Cc: Rik van Riel <riel@redhat.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13mm: use pgdat_end_pfn() to simplify the code in othersXishi Qiu
Use "pgdat_end_pfn()" instead of "pgdat->node_start_pfn + pgdat->node_spanned_pages". Simplify the code, no functional change. Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: simplify ocfs2_invalidatepage() and ocfs2_releasepage()Jan Kara
Ocfs2 doesn't do data journalling. Thus its ->invalidatepage and ->releasepage functions never get called on buffers that have journal heads attached. So just use standard variants of functions from buffer.c. Signed-off-by: Jan Kara <jack@suse.cz> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: convert use of typedef ctl_table to struct ctl_tableJoe Perches
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: fix possible double free in ocfs2_write_begin_nolockXue jiufei
When ocfs2_write_cluster_by_desc() failed in ocfs2_write_begin_nolock() because of ENOSPC, it goes to out_quota, freeing data_ac(meta_ac). Then it calls ocfs2_try_to_free_truncate_log() to free space. If enough space freed, it will try to write again. Unfortunately, some error happenes before ocfs2_lock_allocators(), it goes to out and free data_ac(meta_ac) again. Signed-off-by: joyce <xuejiufei@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Acked-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: add missing errno in ocfs2_ioctl_move_extents()Younger Liu
If the file is not regular or writeable, it should return errno(EPERM). This patch is based on 85a258b70d ("ocfs2: fix error handling in ocfs2_ioctl_move_extents()"). Signed-off-by: Younger Liu <younger.liu@huawei.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: do not call brelse() if group_bh is not initialized in ocfs2_group_add()Younger Liu
If group_bh is not initialized, there is no need to release. This problem does not cause anything wrong, but the patch would make the code more logical. Signed-off-by: Younger Liu <younger.liu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: rollback transaction in ocfs2_group_add()Younger Liu
If ocfs2_journal_access_di() fails, group->bg_next_group should rollback. Otherwise, there would be a inconsistency between group_bh and main_bm_bh. Signed-off-by: Younger Liu <younger.liu@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: break useless while loopJunxiao Bi
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: use find_last_bit()Akinobu Mita
We already have find_last_bit(). So just use it as described in the comment. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: delay migration when the lockres is in migration stateXue jiufei
We trigger a bug in __dlm_lockres_reserve_ast() when we parallel umount 4 nodes. The situation is as follows: 1) Node A migrate all lockres it owned(eg. lockres A) to other nodes say node B when it umounts. 2) Receiving MIG_LOCKRES message from A, Node B masters the lockres A with DLM_LOCK_RES_MIGRATING state set. 3) Then we umount ocfs2 on node B. It also should migrate lockres A to another node, say node C. But now, DLM_LOCK_RES_MIGRATING state of lockers A is not cleared. Node B triggered the BUG on lockres with state DLM_LOCK_RES_MIGRATING. Signed-off-by: Xuejiufei <xuejiufei@huawei.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Tariq Saeed <tariq.x.saeed@oracle.com> Cc: Srinivas Eeda <srinivas.eeda@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: skip locks in the blocked listXue jiufei
A parallel umount on 4 nodes triggered a bug in dlm_process_recovery_date(). Here's the situation: Receiving MIG_LOCKRES message, A node processes the locks in migratable lockres. It copys lvb from migratable lockres when processing the first valid lock. If there is a lock in the blocked list with the EX level, it triggers the BUG. Since valid lvbs are set when locks are granted with EX or PR levels, locks in the blocked list cannot have valid lvbs. Therefore I think we should skip the locks in the blocked list. Signed-off-by: Xuejiufei <xuejiufei@huawei.com> Signed-off-by: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: use bitmap_weight()Akinobu Mita
Use bitmap_weight() instead of reinventing the wheel. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: don't spam on -EDQUOTJoel Becker
-EDQUOT is a user-visible error, not a logic problem. Teach mlog_errno() to ignore it like it ignores -ENOSPC, etc. Signed-off-by: Joel Becker <jlbec@evilplan.org> Reviewed-by: Jan Kara <jack@suse.cz> Reported-by: Marek Królikowski <admin@wset.edu.pl> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: add necessary check in case sb_getblk() failsRui Xiang
sb_getblk() may return an err, so add a check for bh. [joseph.qi@huawei.com: also add a check after calling sb_getblk() in ocfs2_create_xattr_block()] Signed-off-by: Rui Xiang <rui.xiang@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13ocfs2: return ENOMEM when sb_getblk() failsRui Xiang
The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So return ENOMEM instead when it fails. [joseph.qi@huawei.com: ocfs2_symlink_get_block() and ocfs2_read_blocks_sync() and ocfs2_read_blocks() need the same change] Signed-off-by: Rui Xiang <rui.xiang@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13fs/ocfs2/file.c: fix wrong commentJunxiao Bi
Unwritten extent only exists for file systems which support holes. But the comment said was opposite meaning and also the comment is not very clear, so rephase it. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-13fs/ocfs2: remove unnecessary variable bits_wanted from ocfs2_calc_extend_creditsGoldwyn Rodrigues
Code cleanup to remove unnecessary variable passed but never used to ocfs2_calc_extend_credits. Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-12Merge tag 'devicetree-for-3.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree updates from Rob Herring: "DeviceTree updates for 3.13. This is a bit larger pull request than usual for this cycle with lots of clean-up. - Cross arch clean-up and consolidation of early DT scanning code. - Clean-up and removal of arch prom.h headers. Makes arch specific prom.h optional on all but Sparc. - Addition of interrupts-extended property for devices connected to multiple interrupt controllers. - Refactoring of DT interrupt parsing code in preparation for deferred probe of interrupts. - ARM cpu and cpu topology bindings documentation. - Various DT vendor binding documentation updates" * tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits) powerpc: add missing explicit OF includes for ppc dt/irq: add empty of_irq_count for !OF_IRQ dt: disable self-tests for !OF_IRQ of: irq: Fix interrupt-map entry matching MIPS: Netlogic: replace early_init_devtree() call of: Add Panasonic Corporation vendor prefix of: Add Chunghwa Picture Tubes Ltd. vendor prefix of: Add AU Optronics Corporation vendor prefix of/irq: Fix potential buffer overflow of/irq: Fix bug in interrupt parsing refactor. of: set dma_mask to point to coherent_dma_mask of: add vendor prefix for PHYTEC Messtechnik GmbH DT: sort vendor-prefixes.txt of: Add vendor prefix for Cadence of: Add empty for_each_available_child_of_node() macro definition arm/versatile: Fix versatile irq specifications. of/irq: create interrupts-extended property microblaze/pci: Drop PowerPC-ism from irq parsing of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code. of/irq: Use irq_of_parse_and_map() ...
2013-11-12Merge tag 'h8300-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull h8300 platform removal from Guenter Roeck: "The patch series has been in -next for more than one relase cycle. I did get a number of Acks, and no objections. H8/300 has been dead for several years, the kernel for it has not compiled for ages, and recent versions of gcc for it are broken. Remove support for it" * tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: CREDITS: Add Yoshinori Sato for h8300 fs/minix: Drop dependency on H8300 Drop remaining references to H8/300 architecture Drop MAINTAINERS entry for H8/300 watchdog: Drop references to H8300 architecture net/ethernet: Drop H8/300 Ethernet driver net/ethernet: smsc9194: Drop conditional code for H8/300 ide: Drop H8/300 driver Drop support for Renesas H8/300 (h8300) architecture
2013-11-12Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler changes from Ingo Molnar: "The main changes in this cycle are: - (much) improved CONFIG_NUMA_BALANCING support from Mel Gorman, Rik van Riel, Peter Zijlstra et al. Yay! - optimize preemption counter handling: merge the NEED_RESCHED flag into the preempt_count variable, by Peter Zijlstra. - wait.h fixes and code reorganization from Peter Zijlstra - cfs_bandwidth fixes from Ben Segall - SMP load-balancer cleanups from Peter Zijstra - idle balancer improvements from Jason Low - other fixes and cleanups" * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (129 commits) ftrace, sched: Add TRACE_FLAG_PREEMPT_RESCHED stop_machine: Fix race between stop_two_cpus() and stop_cpus() sched: Remove unnecessary iteration over sched domains to update nr_busy_cpus sched: Fix asymmetric scheduling for POWER7 sched: Move completion code from core.c to completion.c sched: Move wait code from core.c to wait.c sched: Move wait.c into kernel/sched/ sched/wait: Fix __wait_event_interruptible_lock_irq_timeout() sched: Avoid throttle_cfs_rq() racing with period_timer stopping sched: Guarantee new group-entities always have weight sched: Fix hrtimer_cancel()/rq->lock deadlock sched: Fix cfs_bandwidth misuse of hrtimer_expires_remaining sched: Fix race on toggling cfs_bandwidth_used sched: Remove extra put_online_cpus() inside sched_setaffinity() sched/rt: Fix task_tick_rt() comment sched/wait: Fix build breakage sched/wait: Introduce prepare_to_wait_event() sched/wait: Add ___wait_cond_timeout() to wait_event*_timeout() too sched: Remove get_online_cpus() usage sched: Fix race in migrate_swap_stop() ...
2013-11-11f2fs: issue more large discard commandChangman Lee
o Changes from v1 Use find_next(_zero)_bit suggested by jg.kim When f2fs issues discard command, if segment is contiguous, let's issue more large segment to gather adjacent segments. ** blktrace ** 179,1 0 5859 42.619023770 971 C D 131072 + 2097152 [0] 179,1 0 33665 108.840475468 971 C D 2228224 + 2494464 [0] 179,1 0 33671 109.131616427 971 C D 14909440 + 344064 [0] 179,1 0 33677 109.137100677 971 C D 15261696 + 4096 [0] Signed-off-by: Changman Lee <cm224.lee@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>