summaryrefslogtreecommitdiffstats
path: root/fs/ocfs2/extent_map.c
AgeCommit message (Collapse)Author
2013-09-11ocfs2: fix the end cluster offset of FIEMAPJie Liu
Call fiemap ioctl(2) with given start offset as well as an desired mapping range should show extents if possible. However, we somehow figure out the end offset of mapping via 'mapping_end -= cpos' before iterating the extent records which would cause problems if the given fiemap length is too small to a cluster size, e.g, Cluster size 4096: debugfs.ocfs2 1.6.3 Block Size Bits: 12 Cluster Size Bits: 12 The extended fiemap test utility From David: https://gist.github.com/anonymous/6172331 # dd if=/dev/urandom of=/ocfs2/test_file bs=1M count=1000 # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 0 extents: # Logical Physical Length Flags ^^^^^ <-- No extent is shown In this case, at ocfs2_fiemap(): cpos == mapping_end == 1. Hence the loop of searching extent records was not executed at all. This patch remove the in question 'mapping_end -= cpos', and loops until the cpos is larger than the mapping_end as usual. # ./fiemap /ocfs2/test_file 4096 10 start: 4096, length: 10 File /ocfs2/test_file has 1 extents: # Logical Physical Length Flags 0: 0000000000000000 0000000056a01000 0000000006a00000 0000 Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reported-by: David Weber <wb@munzinger.de> Tested-by: David Weber <wb@munzinger.de> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: Mark Fashen <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11ocfs2: use i_size_read() to access i_sizeJunxiao Bi
Though ocfs2 uses inode->i_mutex to protect i_size, there are both i_size_read/write() and direct accesses. Clean up all direct access to eliminate confusion. Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-24ocfs2: goto out_unlock if ocfs2_get_clusters_nocache() failed in ocfs2_fiemap()Joseph Qi
Last time we found there is lock/unlock bug in ocfs2_file_aio_write, and then we did a thorough search for all lock resources in ocfs2_inode_info, including rw, inode and open lockres and found this bug. My kernel version is 3.0.13, and it is also in the lastest version 3.9. In ocfs2_fiemap, once ocfs2_get_clusters_nocache failed, it should goto out_unlock instead of out, because we need release buffer head, up read alloc sem and unlock inode. Signed-off-by: Joseph Qi <joseph.qi@huawei.com> Reviewed-by: Jie Liu <jeff.liu@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Acked-by: Sunil Mushran <sunil.mushran@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21ocfs2: remove kfree() redundant null checksTim Gardner
smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-17lseek: the "whence" argument is called "whence"Andrew Morton
But the kernel decided to call it "origin" instead. Fix most of the sites. Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-03ocfs2: for SEEK_DATA/SEEK_HOLE, return internal error unchanged if ↵Jeff Liu
ocfs2_get_clusters_nocache() or ocfs2_inode_lock() call failed. Hello, Since ENXIO only means "offset beyond EOF" for SEEK_DATA/SEEK_HOLE, Hence we should return the internal error unchanged if ocfs2_inode_lock() or ocfs2_get_clusters_nocache() call failed rather than ENXIO. Otherwise, it will confuse the user applications when they trying to understand the root cause. Thanks Dave for pointing this out. Thanks, -Jeff Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Joel Becker <jlbec@evilplan.org>
2011-07-25ocfs2: Implement llseek()Sunil Mushran
ocfs2 implements its own llseek() to provide the SEEK_HOLE/SEEK_DATA functionality. SEEK_HOLE sets the file pointer to the start of either a hole or an unwritten (preallocated) extent, that is greater than or equal to the supplied offset. SEEK_DATA sets the file pointer to the start of an allocated extent (not unwritten) that is greater than or equal to the supplied offset. If the supplied offset is on a desired region, then the file pointer is set to it. Offsets greater than or equal to the file size return -ENXIO. Unwritten (preallocated) extents are considered holes because the file system treats reads to such regions in the same way as it does to holes. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
2011-02-22ocfs2: Remove masklog ML_EXTENT_MAP.Tao Ma
Remove mlog(0) from fs/ocfs2/extent_map.c and the masklog EXTENT_MAP. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-03-07ocfs2: Remove EXIT from masklog.Tao Ma
mlog_exit is used to record the exit status of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. This patch just try to remove it or change it. So: 1. if all the error paths already use mlog_errno, it is just removed. Otherwise, it will be replaced by mlog_errno. 2. if it is used to print some return value, it is replaced with mlog(0,...). mlog_exit_ptr is changed to mlog(0. All those mlog(0,...) will be replaced with trace events later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2011-02-21ocfs2: Remove ENTRY from masklog.Tao Ma
ENTRY is used to record the entry of a function. But because it is added in so many functions, if we enable it, the system logs get filled up quickly and cause too much I/O. So actually no one can open it for a production system or even for a test. So for mlog_entry_void, we just remove it. for mlog_entry(...), we replace it with mlog(0,...), and they will be replace by trace event later. Signed-off-by: Tao Ma <boyu.mt@taobao.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: Documentation/filesystems/proc.txt arch/arm/mach-u300/include/mach/debug-macro.S drivers/net/qlge/qlge_ethtool.c drivers/net/qlge/qlge_main.c drivers/net/typhoon.c
2010-02-09tree-wide: Assorted spelling fixesDaniel Mack
In particular, several occurances of funny versions of 'success', 'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address', 'beginning', 'desirable', 'separate' and 'necessary' are fixed. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Joe Perches <joe@perches.com> Cc: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-05ocfs2: Fix contiguousness check in ocfs2_try_to_merge_extent_map()Roel Kluin
The wrong member was compared in the continguousness check. Acked-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-23Ocfs2: Let ocfs2 support fiemap for symlink and fast symlink.Tristan Ye
For fast symlink, it can be treated the same as inlined files since the data extent we want to return of both case all were stored in metadata block. For symlink, it can be simply treated the same as we did for regular files. Signed-off-by: Tristan Ye <tristan.ye@oracle.com> Acked-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-12-17ocfs2: Use FIEMAP_EXTENT_SHAREDSunil Mushran
Adds FIEMAP_EXTENT_SHARED flag to refcounted extents. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Acked-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-22ocfs2: Return extent flags for xattr value tree.Tao Ma
With the new refcount tree, xattr value can also be refcounted among multiple files. So return the appropriate extent flags so that CoW can used it later. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-22ocfs2: Add support for incrementing refcount in the tree.Tao Ma
Given a physical cpos and length, increment the refcount in the tree. If the extent has not been seen before, a refcount record is created for it. Refcount records may be merged or split by this operation. Signed-off-by: Tao Ma <tao.ma@oracle.com>
2009-09-04ocfs2: ocfs2_find_path() only needs the caching infoJoel Becker
ocfs2_find_path and ocfs2_find_leaf() walk our btrees, reading extent blocks. They need struct ocfs2_caching_info for that, but not struct inode. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: Pass ocfs2_caching_info to ocfs2_read_extent_block().Joel Becker
extent blocks belong to btrees on more than just inodes, so we want to pass the ocfs2_caching_info structure directly to ocfs2_read_extent_block(). A number of places in alloc.c can now drop struct inode from their argument list. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-09-04ocfs2: Take the inode out of the metadata read/write paths.Joel Becker
We are really passing the inode into the ocfs2_read/write_blocks() functions to get at the metadata cache. This commit passes the cache directly into the metadata block functions, divorcing them from the inode. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-01-05ocfs2: Wrap virtual block reads in ocfs2_read_virt_blocks()Joel Becker
The ocfs2_read_dir_block() function really maps an inode's virtual blocks to physical ones before calling ocfs2_read_blocks(). Let's extract that to common code, because other places might want to do that. Other than the block number being virtual, ocfs2_read_virt_blocks() takes the same arguments as ocfs2_read_blocks(). It converts those virtual block numbers to physical before calling ocfs2_read_blocks() directly. If the blocks asked for are discontiguous, this can mean multiple calls to ocfs2_read_blocks(), but this is mostly hidden from the caller. Like ocfs2_read_blocks(), the caller can pass in an existing buffer_head. This is usually done to pick up some readahead I/O. ocfs2_read_virt_blocks() checks the buffer_head's block number against the extent map - it must match. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Wrap extent block reads in a dedicated function.Joel Becker
We weren't consistently checking extent blocks after we read them. Most places checked the signature, but none checked h_blkno or h_fs_signature. Create a toplevel ocfs2_read_extent_block() that does the read and the validation. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2009-01-05ocfs2: Wrap inode block reads in a dedicated function.Joel Becker
The ocfs2 code currently reads inodes off disk with a simple ocfs2_read_block() call. Each place that does this has a different set of sanity checks it performs. Some check only the signature. A couple validate the block number (the block read vs di->i_blkno). A couple others check for VALID_FL. Only one place validates i_fs_generation. A couple check nothing. Even when an error is found, they don't all do the same thing. We wrap inode reading into ocfs2_read_inode_block(). This will validate all the above fields, going readonly if they are invalid (they never should be). ocfs2_read_inode_block_full() is provided for the places that want to pass read_block flags. Every caller is passing a struct inode with a valid ip_blkno, so we don't need a separate blkno argument either. We will remove the validation checks from the rest of the code in a later commit, as they are no longer necessary. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Simplify ocfs2_read_block()Joel Becker
More than 30 callers of ocfs2_read_block() pass exactly OCFS2_BH_CACHED. Only six pass a different flag set. Rather than have every caller care, let's make ocfs2_read_block() take no flags and always do a cached read. The remaining six places can call ocfs2_read_blocks() directly. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-14ocfs2: Require an inode for ocfs2_read_block(s)().Joel Becker
Now that synchronous readers are using ocfs2_read_blocks_sync(), all callers of ocfs2_read_blocks() are passing an inode. Use it unconditionally. Since it's there, we don't need to pass the ocfs2_super either. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-13ocfs2: Add extent tree operation for xattr value btreesTao Ma
Add some thin wrappers around ocfs2_insert_extent() for each of the 3 different btree types, ocfs2_inode_insert_extent(), ocfs2_xattr_value_insert_extent() and ocfs2_xattr_tree_insert_extent(). The last is for the xattr index btree, which will be used in a followup patch. All the old callers in file.c etc will call ocfs2_dinode_insert_extent(), while the other two handle the xattr issue. And the init of extent tree are handled by these functions. When storing xattr value which is too large, we will allocate some clusters for it and here ocfs2_extent_list and ocfs2_extent_rec will also be used. In order to re-use the b-tree operation code, a new parameter named "private" is added into ocfs2_extent_tree and it is used to indicate the root of ocfs2_exent_list. The reason is that we can't deduce the root from the buffer_head now. It may be in an inode, an ocfs2_xattr_block or even worse, in any place in an ocfs2_xattr_bucket. Signed-off-by: Tao Ma <tao.ma@oracle.com> Signed-off-by: Mark Fasheh <mfasheh@suse.com>
2008-10-03ocfs2: fiemap supportMark Fasheh
Plug ocfs2 into ->fiemap. Some portions of ocfs2_get_clusters() had to be refactored so that the extent cache can be skipped in favor of going directly to the on-disk records. This makes it easier for us to determine which extent is the last one in the btree. Also, I'm not sure we want to be caching fiemap lookups anyway as they're not directly related to data read/write. Signed-off-by: Mark Fasheh <mfasheh@suse.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: ocfs2-devel@oss.oracle.com Cc: linux-fsdevel@vger.kernel.org
2007-10-12ocfs2: Read support for inline dataMark Fasheh
This hooks up ocfs2_readpage() to populate a page with data from an inode block. Direct IO reads from inline data are modified to fall back to buffered I/O. Appropriate checks are also placed in the extent map code to avoid reading an extent list when inline data might be stored. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Reviewed-by: Joel Becker <joel.becker@oracle.com>
2007-07-10ocfs2: btree changes for unwritten extentsMark Fasheh
Writes to a region marked as unwritten might result in a record split or merge. We can support splits by making minor changes to the existing insert code. Merges require left rotations which mostly re-use right rotation support functions. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-07-10[PATCH] ocfs2: use list_for_each_entry where beneficalChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: Cache extent recordsMark Fasheh
The extent map code was ripped out earlier because of an inability to deal with holes. This patch adds back a simpler caching scheme requiring far less code. Our old extent map caching was designed back when meta data block caching in Ocfs2 didn't work very well, resulting in many disk reads. These days our metadata caching is much better, resulting in no un-necessary disk reads. As a result, extent caching doesn't have to be as fancy, nor does it have to cache as many extents. Keeping the last 3 extents seen should be sufficient to give us a small performance boost on some streaming workloads. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: Fix extent lookup to return true size of holesMark Fasheh
Initially, we had wired things to return a size '1' of holes. Cook up a small amount of code to find the next extent and calculate the number of clusters between the virtual offset and the next allocated extent. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: Read from an unwritten extent returns zerosMark Fasheh
Return an optional extent flags field from our lookup functions and wire up callers to treat unwritten regions as holes for the purpose of returning zeros to the user. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: make room for unwritten extents flagMark Fasheh
Due to the size of our group bitmaps, we'll never have a leaf node extent record with more than 16 bits worth of clusters. Split e_clusters up so that leaf nodes can get a flags field where we can mark unwritten extents. Interior nodes whose length references all the child nodes beneath it can't split their e_clusters field, so we use a union to preserve sizing there. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: teach ocfs2_file_aio_write() about sparse filesMark Fasheh
Unfortunately, ocfs2 can no longer make use of generic_file_aio_write_nlock() because allocating writes will require zeroing of pages adjacent to the I/O for cluster sizes greater than page size. Implement a custom file write here, which can order page locks for zeroing. This also has the advantage that cluster locks can easily be ordered outside of the page locks. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2007-04-26ocfs2: temporarily remove extent map cachingMark Fasheh
The code in extent_map.c is not prepared to deal with a subtree being rotated between lookups. This can happen when filling holes in sparse files. Instead of a lengthy patch to update the code (which would likely lose the benefit of caching subtree roots), we remove most of the algorithms and implement a simple path based lookup. A less ambitious extent caching scheme will be added in a later patch. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-12-07[PATCH] slab: remove kmem_cache_tChristoph Lameter
Replace all uses of kmem_cache_t with struct kmem_cache. The patch was generated using the following script: #!/bin/sh # # Replace one string by another in all the kernel sources. # set -e for file in `find * -name "*.c" -o -name "*.h"|xargs grep -l $1`; do quilt add $file sed -e "1,\$s/$1/$2/g" $file >/tmp/$$ mv /tmp/$$ $file quilt refresh done The script was run like this sh replace kmem_cache_t "struct kmem_cache" Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29ocfs2: silence -EEXIST from ocfs2_extent_map_insert/lookupJoel Becker
Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-05-17ocfs2: fix gfp mask in some file system pathsSunil Mushran
We were using GFP_KERNEL in a handful of places which really wanted GFP_NOFS. Fix this. Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-24ocfs2: don't use MLF* in the file systemMark Fasheh
Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-03-01ocfs2: Respond to on-disk corruption in the extent map code.Joel Becker
The extent map code has long noticed when the on-disk extent information is corrupt. However, so far it has only returned an error. We should take the filesystem read-only, as it is corrupt. Signed-off-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] BUG_ON() Conversion in fs/ocfs2/Eric Sesterhenn / snakebyte
this changes if() BUG(); constructs to BUG_ON() which is cleaner, contains unlikely() and can better optimized away. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-03[PATCH] OCFS2: __init / __exit problemAdrian Bunk
Functions called by __init funtions mustn't be __exit. Reported by Jan-Benedict Glaw <jbglaw@lug-owl.de>. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-01-03[PATCH] OCFS2: The Second Oracle Cluster FilesystemMark Fasheh
The OCFS2 file system module. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com>