summaryrefslogtreecommitdiffstats
path: root/fs/gfs2/log.c
AgeCommit message (Collapse)Author
2010-10-19Merge branch 'v2.6.36-rc8' into for-2.6.37/barrierJens Axboe
Conflicts: block/blk-core.c drivers/block/loop.c mm/swapfile.c Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-09-17GFS2: gfs2_logd should be using interruptible waitsSteven Whitehouse
Looks like this crept in, in a recent update. Reported-by: Krzysztof Urbaniak <urban@bash.org.pl> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-09-10gfs2: replace barriers with explicit flush / FUA usageChristoph Hellwig
Switch to the WRITE_FLUSH_FUA flag for log writes, remove the EOPNOTSUPP detection for barriers and stop setting the barrier flag for discards. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Acked-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: unify flags for struct bio and struct requestChristoph Hellwig
Remove the current bio flags and reuse the request flags for the bio, too. This allows to more easily trace the type of I/O from the filesystem down to the block driver. There were two flags in the bio that were missing in the requests: BIO_RW_UNPLUG and BIO_RW_AHEAD. Also I've renamed two request flags that had a superflous RW in them. Note that the flags are in bio.h despite having the REQ_ name - as blkdev.h includes bio.h that is the only way to go for now. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-08-07block: BARRIER request should imply SYNCChristoph Hellwig
A barrier request should by defintion have priority in get_request and let the queue be unplugged immediately as it's blocking all forward progress due to the queue draining. Most filesystems already get this implicitly by the way how submit_bh treats the buffer_ordered flag, and gfs2 sets it explicitly. But btrfs and XFS are still forgetting to set the flag, as is blkdev_issue_flush and some places in DM/MD. For XFS on metadata heavy workloads this gives a consistent speedup in the 2-3% range. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-05-21GFS2: Rework reclaiming unlinked dinodesBob Peterson
The previous patch I wrote for reclaiming unlinked dinodes had some shortcomings and did not prevent all hangs. This version is much cleaner and more logical, and has passed very difficult testing. Sorry for the churn. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-06GFS2: Add some useful messagesSteven Whitehouse
The following patch adds a message to indicate when barriers have been disabled due to a block device which doesn't support them. You could already tell this via the mount options in /proc/mounts, but all the other filesystems also log a message at the same time. Also, the same mechanisms are used to indicate when the lock demote interface has been used (only ever used for debugging) which is a request from our support team. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-05-05GFS2: Various gfs2_logd improvementsBenjamin Marzinski
This patch contains various tweaks to how log flushes and active item writeback work. gfs2_logd is now managed by a waitqueue, and gfs2_log_reseve now waits for gfs2_logd to do the log flushing. Multiple functions were rewritten to remove the need to call gfs2_log_lock(). Instead of using one test to see if gfs2_logd had work to do, there are now seperate tests to check if there are two many buffers in the incore log or if there are two many items on the active items list. This patch is a port of a patch Steve Whitehouse wrote about a year ago, with some minor changes. Since gfs2_ail1_start always submits all the active items, it no longer needs to keep track of the first ai submitted, so this has been removed. In gfs2_log_reserve(), the order of the calls to prepare_to_wait_exclusive() and wake_up() when firing off the logd thread has been switched. If it called wake_up first there was a small window for a race, where logd could run and return before gfs2_log_reserve was ready to get woken up. If gfs2_logd ran, but did not free up enough blocks, gfs2_log_reserve() would be left waiting for gfs2_logd to eventualy run because it timed out. Finally, gt_logd_secs, which controls how long to wait before gfs2_logd times out, and flushes the log, can now be set on mount with ar_commit. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2010-03-11GFS2: Allow the number of committed revokes to temporarily be negativeBenjamin Marzinski
GFS2 tracks the number of revokes and unrevokes that are part of committed transactions via sd_log_commited_revoke. It is possible for one process to add revokes during its transaction, while another process unrevokes them during its transaction. If the second process finishes its transaction first, sd_log_commited_revoke will be decremented by the number of unrevokes that the second process did, without first being incremented by the number of revokes the first process did. This is fine, since all started transactions must be completed before the journal can be flushed. However, sd_log_commited_revoke is an unsigned integer, and log_refund() causes an assertion failure if it would go negative at the end of a transaction. This patch makes sd_log_commited_revoke a signed integer and allows it to go negative. __gfs2_log_flush() still checks that it mataches the actual number of revokes. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-12-03GFS2: Tag all metadata with jidSteven Whitehouse
There are two spare field in the header common to all GFS2 metadata. One is just the right size to fit a journal id in it, and this patch updates the journal code so that each time a metadata block is modified, we tag it with the journal id of the node which is performing the modification. The reason for this is that it should make it much easier to debug issues which arise if we can tell which node was the last to modify a particular metadata block. Since the field is updated before the block is written into the journal, each journal should only contain metadata which is tagged with its own journal id. The one exception to this is the journal header block, which might have a different node's id in it, if that journal was recovered by another node in the cluster. Thus each journal will contain a record of which nodes recovered it, via the journal header. The other field in the metadata header could potentially be used to hold information about what kind of operation was performed, but for the time being we just zero it on each transaction so that if we use it for that in future, we'll know that the information (where it exists) is reliable. I did consider using the other field to hold the journal sequence number, however since in GFS2's journaling we write the modified data into the journal and not the original data, this gives no information as to what action caused the modification, so I think we can probably come up with a better use for those 64 bits in the future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-12GFS2: Add tracepointsSteven Whitehouse
This patch adds the ability to trace various aspects of the GFS2 filesystem. The trace points are divided into three groups, glocks, logging and bmap. These points have been chosen because they allow inspection of the major internal functions of GFS2 and they are also generic enough that they are unlikely to need any major changes as the filesystem evolves. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-06-11gfs2: remove ->write_super and stop maintaining ->s_dirtChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-05-11GFS2: Update the rw flagsSteven Whitehouse
After Jens recent updates: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=a1f242524c3c1f5d40f1c9c343427e34d1aadd6e et al. this is a patch to bring gfs2 uptodate with the core code. Also I've managed to squash another call to ll_rw_block() along the way. There is still one part of the GFS2 I/O paths which are not correctly annotated and that is due to the sharing of the writeback code between the data and metadata address spaces. I would like to change that too, but this patch is still worth doing on its own, I think. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-03-24GFS2: Merge lock_dlm module into GFS2Steven Whitehouse
This is the big patch that I've been working on for some time now. There are many reasons for wanting to make this change such as: o Reducing overhead by eliminating duplicated fields between structures o Simplifcation of the code (reduces the code size by a fair bit) o The locking interface is now the DLM interface itself as proposed some time ago. o Fewer lookups of glocks when processing replies from the DLM o Fewer memory allocations/deallocations for each glock o Scope to do further optimisations in the future (but this patch is more than big enough for now!) Please note that (a) this patch relates to the lock_dlm module and not the DLM itself, that is still a separate module; and (b) that we retain the ability to build GFS2 as a standalone single node filesystem with out requiring the DLM. This patch needs a lot of testing, hence my keeping it I restarted my -git tree after the last merge window. That way, this has the maximum exposure before its merged. This is (modulo a few minor bug fixes) the same patch that I've been posting on and off the the last three months and its passed a number of different tests so far. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-09-26GFS2: Support for I/O barriersSteven Whitehouse
This patch adds barrier support to GFS2. There is not a lot of change really... we just add the barrier flag when we write journal header blocks. If the underlying device refuses to support them, we fall back to the previous way of doing things (wait for the I/O and hope) since there is nothing else we can do. There is no user configuration, barriers will always be on unless the device refuses to support them. This seems a reasonable solution to me since this is a correctness issue. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-06-27[GFS2] trivial sparse lock annotationsHarvey Harrison
Annotate the &sdp->sd_log_lock. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-04-18[GFS2] fix assertion in log_refund()Roel Kluin
since unsigned, unused >= 0 is always true. Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-03-31[GFS2] Only do lo_incore_commit onceBob Peterson
This patch is performance related. When we're doing a log flush, I noticed we were calling buf_lo_incore_commit twice: once for data bufs and once for metadata bufs. Since this is the same function and does the same thing in both cases, there should be no reason to call it twice. Since we only need to call it once, we can also make it faster by removing it from the generic "lops" code and making it a stand-along static function. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix assert in log codeSteven Whitehouse
Although the values were all being calculated correctly, there was a race in the assert due to the way it was using atomic variables. This changes the value we assert on so that we get the same effect by testing a different variable. This prevents the assert triggering when it shouldn't. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix log block mapperSteven Whitehouse
A missing offset in the calculation. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Journal extent mappingBob Peterson
This patch saves a little time when gfs2 writes to the journals by keeping a mapping between logical and physical blocks on disk. That's better than constantly looking up indirect pointers in buffers, when the journals are several levels of indirection (which they typically are). Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove function gfs2_get_blockBob Peterson
This patch is just a cleanup. Function gfs2_get_block() just calls function gfs2_block_map reversing the last two parameters. By reversing the parameters, gfs2_block_map() may be called directly and function gfs2_get_block may be eliminated altogether. Since this function is done for every block operation, this streamlines the code and makes it a little bit more efficient. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Fix runtime issue with UP kernelsFabio Massimo Di Nitto
The issue is indeed UP vs SMP and it is totally random. spin_is_locked() is a bad assertion because there is no correct answer on UP. on UP spin_is_locked() has to return either one value or another, always. This means that in my setup I am lucky enough to trigger the issue and your you are lucky enough not to. the patch in attachment removes the bogus calls to BUG_ON and according to David (in CC and thanks for the long explanation on the problem) we can rely upon things like lockdep to find problem that might be trying to catch. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't periodically update the jindexSteven Whitehouse
We only care about the content of the jindex in two cases, one is when we mount the fs and the other is when we need to recover another journal. In both cases we have to update the jindex anyway, so there is no point in updating it periodically between times, so this removes it to simplify gfs2_logd. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Move gfs2_logd into log.cSteven Whitehouse
This means that we can mark gfs2_ail1_empty static and prepares the way for further changes. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Use atomic_t for journal free blocks counterSteven Whitehouse
This patch changes the counter which keeps track of the free blocks in the journal to an atomic_t in preparation for the following patch which will update the log reservation code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Don't add glocks to the journalSteven Whitehouse
The only reason for adding glocks to the journal was to keep track of which locks required a log flush prior to release. We add a flag to the glock to allow this check to be made in a simpler way. This reduces the size of a glock (by 12 bytes on i386, 24 on x86_64) and means that we can avoid extra work during the journal flush. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Add writepages for GFS2 jdataSteven Whitehouse
This patch resolves a lock ordering issue where we had been getting a transaction lock in the wrong order with respect to the page lock. By using writepages rather than just writepage, it is then possible to start a transaction before locking the page, and thus matching the locking order elsewhere in the code. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2008-01-25[GFS2] Remove useless i_cache from inodesSteven Whitehouse
The i_cache was designed to keep references to the indirect blocks used during block mapping so that they didn't have to be looked up continually. The idea failed because there are too many places where the i_cache needs to be freed, and this has in the past been the cause of many bugs. In addition there was no performance benefit being gained since the disk blocks in question were cached anyway. So this patch removes it in order to simplify the code to prepare for other changes which would otherwise have had to add further support for this feature. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Get superblock a different waySteven Whitehouse
The mapping may be NULL by the time the I/O has completed, so we now get the superblock by a different route (via the bd and glock) to avoid this problem. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Wendy Cheng <wcheng@redhat.com>
2007-10-10[GFS2] Clean up journaled data writingSteven Whitehouse
This patch cleans up the code for writing journaled data into the log. It also removes the need to allocate a small "tag" structure for each block written into the log. Instead we just keep count of the outstanding I/O so that we can be sure that its all been written at the correct time. Another result of this patch is that a number of ll_rw_block() calls have become submit_bh() calls, closing some races at the same time. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up gfs2_trans_add_revoke()Steven Whitehouse
The following alters gfs2_trans_add_revoke() to take a struct gfs2_bufdata as an argument. This eliminates the memory allocation which was previously required by making use of the already existing struct gfs2_bufdata. It makes some sanity checks to ensure that the gfs2_bufdata has been removed from all the lists before its recycled as a revoke structure. This saves one memory allocation and one free per revoke structure. Also as a result, and to simplify the locking, since there is no longer any blocking code in gfs2_trans_add_revoke() we must hold the log lock whenever this function is called. This reduces the amount of times we take and unlock the log lock. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up ordered write codeSteven Whitehouse
The following patch removes the ordered write processing from databuf_lo_before_commit() and moves it to log.c. This has the effect of greatly simplyfying databuf_lo_before_commit() and well as potentially making the ordered write code more efficient. As a side effect of this, its now possible to remove ordered buffers from the ordered buffer list at any time, so we now make use of this in invalidatepage and releasepage to ensure timely release of these buffers. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Introduce gfs2_remove_from_ailSteven Whitehouse
This collects together the operations required to remove a gfs2_bufdata from the ail lists. Its only called from two places to start with, but expect to see more of this function in future. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Clean up invalidatepage/releasepageSteven Whitehouse
This patch fixes some bugs relating to journaled data files by cleaning up the gfs2_invalidatepage() and gfs2_releasepage() functions. We now never block during gfs2_releasepage(), instead we always either release or refuse to release depending on the status of the buffers. This fixes Red Hat bugzillas #248969 and #252392. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Bob Peterson <rpeterso@redhat.com>
2007-10-10[GFS2] Detach buf data during in-place writebackBob Peterson
This is patch 5 of 5 for bug #248176 Metadata corruption was occurring because page references weren't being removed in all cases. I previously added a function called detach_bufdata, but I discovered there already WAS a function out there to do the job. It's called gfs2_meta_cache_flush. So I added a call to that to remove the page references. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10[GFS2] Revert part of earlier log.c changesBob Peterson
This is patch 2 of 5 for bug #248176. The list_move code previously concocted in log.c for bug #238162 (see https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=238162#c23) never runs as bh can now never be NULL at this point. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Small fixes to logging codeSteven Whitehouse
This reverts part of an earlier patch which tried to reclaim gfs2_bufdata structures too early and resulted in a "use after free" case (this bit from me). Also a change to not write out log headers unless we really need to (in the case of flushing nothing we don't need a header) from Bob. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2007-07-09[GFS2] assertion failure after writing to journaled file, umountRobert Peterson
This patch passes all my nasty tests that were causing the code to fail under one circumstance or another. Here is a complete summary of all changes from today's git tree, in order of appearance: 1. There are now separate variables for metadata buffer accounting. 2. Variable sd_log_num_hdrs is no longer needed, since the header accounting is taken care of by the reserve/refund sequence. 3. Fixed a tiny grammatical problem in a comment. 4. Added a new function "calc_reserved" to calculate the reserved log space. This isn't entirely necessary, but it has two benefits: First, it simplifies the gfs2_log_refund function greatly. Second, it allows for easier debugging because I could sprinkle the code with calls to this function to make sure the accounting is proper (by adding asserts and printks) at strategic point of the code. 5. In log_pull_tail there apparently was a kludge to fix up the accounting based on a "pull" parameter. The buffer accounting is now done properly, so the kludge was removed. 6. File sync operations were making a call to gfs2_log_flush that writes another journal header. Since that header was unplanned for (reserved) by the reserve/refund sequence, the free space had to be decremented so that when log_pull_tail gets called, the free space is be adjusted properly. (Did I hear you call that a kludge? well, maybe, but a lot more justifiable than the one I removed). 7. In the gfs2_log_shutdown code, it optionally syncs the log by specifying the PULL parameter to log_write_header. I'm not sure this is necessary anymore. It just seems to me there could be cases where shutdown is called while there are outstanding log buffers. 8. In the (data)buf_lo_before_commit functions, I changed some offset values from being calculated on the fly to being constants. That simplified some code and we might as well let the compiler do the calculation once rather than redoing those cycles at run time. 9. This version has my rewritten databuf_lo_add function. This version is much more like its predecessor, buf_lo_add, which makes it easier to understand. Again, this might not be necessary, but it seems as if this one works as well as the previous one, maybe even better, so I decided to leave it in. 10. In databuf_lo_before_commit, a previous data corruption problem was caused by going off the end of the buffer. The proper solution is to have the proper limit in place, rather than stopping earlier. (Thus my previous attempt to fix it is wrong). If you don't wrap the buffer, you're stopping too early and that causes more log buffer accounting problems. 11. In lops.h there are two new (previously mentioned) constants for figuring out the data offset for the journal buffers. 12. There are also two new functions, buf_limit and databuf_limit to calculate how many entries will fit in the buffer. 13. In function gfs2_meta_wipe, it needs to distinguish between pinned metadata buffers and journaled data buffers for proper journal buffer accounting. It can't use the JDATA gfs2_inode flag because it's sometimes passed the "real" inode and sometimes the "metadata inode" and the inode flags will be random bits in a metadata gfs2_inode. It needs to base its decision on which was passed in. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Journaled file write/unstuff bugRobert Peterson
This patch is for bugzilla bug 283162, which uncovered a number of bugs pertaining to writing to files that have the journaled bit on. These bugs happen most often when writing to the meta_fs because the files are always journaled. So operations like gfs2_grow were particularly vulnerable, although many of the problems could be recreated with normal files after setting the journaled bit on. The problems fixed are: -GFS2 wasn't ever writing unstuffed journaled data blocks to their in-place location on disk. Now it does. -If you unmounted too quickly after doing IO to a journaled file, GFS2 was crashing because you would discard a buffer whose bufdata was still on the active items list. GFS2 now deals with this gracefully. -GFS2 was losing track of the bufdata for journaled data blocks, and it wasn't getting freed, causing an error when you tried to unmount the module. GFS2 now frees all the bufdata structures. -There was a memory corruption occurring because GFS2 wrote twice as many log entries for journaled buffers. -It was occasionally trying to write journal headers in buffers that weren't currently mapped. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] fix jdata issuesBenjamin Marzinski
This is a patch for the first three issues of RHBZ #238162 The first issue is that when you allocate a new page for a file, it will not start off uptodate. This makes sense, since you haven't written anything to that part of the file yet. Unfortunately, gfs2_pin() checks to make sure that the buffers are uptodate. The solution to this is to mark the buffers uptodate in gfs2_commit_write(), after they have been zeroed out and have the data written into them. I'm pretty confident with this fix, although it's not completely obvious that there is no problem with marking the buffers uptodate here. The second issue is simply that you can try to pin a data buffer that is already on the incore log, and thus, already pinned. This patch checks to see if this buffer is already on the log, and exits databuf_lo_add() if it is, just like buf_lo_add() does. The third issue is that gfs2_log_flush() doesn't do it's block accounting correctly. Both metadata and journaled data are logged, but gfs2_log_flush() only compares the number of metadata blocks with the number of blocks to commit to the ondisk journal. This patch also counts the journaled data blocks. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09[GFS2] Make the log reserved blocks depend on block sizeSteven Whitehouse
The number of blocks which we reserve in the log at the start of each transaction needs to depends upon the block size since the overhead is related to the number of "pointers" which can be fitted into a single block. This relates to Red Hat bz #240435 Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] fs/gfs2/log.c:log_bmap() fix printk format warningRyusuke Konishi
Fix a printk format warning in fs/gfs2/log.c: fs/gfs2/log.c:322: warning: format '%llu' expects type 'long long unsigned int', but argument 3 has type 'sector_t' Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Move gfs2_meta_syncfs() into log.cSteven Whitehouse
By moving gfs2_meta_syncfs() into log.c, gfs2_ail1_start() can be made static. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30[GFS2] Fix journal flush problemSteven Whitehouse
This fixes a bug which resulted in poor performance due to flushing the journal too often. The code path in question was via the inode_go_sync() function in glops.c. The solution is not to flush the journal immediately when inodes are ejected from memory, but batch up the work for glockd to deal with later on. This means that glocks may now live on beyond the end of the lifetime of their inodes (but not very much longer in the normal case). Also fixed in this patch is a bug (which was hidden by the bug mentioned above) in calculation of the number of free journal blocks. The gfs2_logd process has been altered to be more responsive to the journal filling up. We now wake it up when the number of uncommitted journal blocks has reached the threshold level rather than trying to flush directly at the end of each transaction. This again means doing fewer, but larger, log flushes in general. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-20[GFS2] Fix bmap to map extents properlySteven Whitehouse
This fix means that bmap will map extents of the length requested by the VFS rather than guessing at it, or just mapping one block at a time. The other callers of gfs2_block_map are audited to ensure they send the correct max extent lengths (i.e. set bh->b_size correctly). Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-12[GFS2] Fix bug where lock not heldSteven Whitehouse
The log lock needs to be held when manipulating the counter for the number of free journal blocks. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-10-03[GFS2] Move logging code into log.c (mostly)Steven Whitehouse
This moves the logging code from meta_io.c into log.c and glops.c. As a result the routines can now be static and all the logging code is together in log.c, leaving meta_io.c with just metadata i/o code in it. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19[GFS2] Use list_for_each_entry_safe_reverse in gfs2_ail1_start()Steven Whitehouse
This is an attempt to fix Red Hat bz 204364. I don't hit it all the time, but with these changes, running postmark which used to trigger it on a regular basis no longer appears to. So I'm not saying that its 100% certain that its fixed, but it does look promising at the moment. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-09-19[GFS2] Export lm_interface to kernel headersFabio Massimo Di Nitto
lm_interface.h has a few out of the tree clients such as GFS1 and userland tools. Right now, these clients keeps a copy of the file in their build tree that can go out of sync. Move lm_interface.h to include/linux, export it to userland and clean up fs/gfs2 to use the new location. Signed-off-by: Fabio M. Di Nitto <fabbione@ubuntu.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>