summaryrefslogtreecommitdiffstats
path: root/fs/fuse/fuse_i.h
AgeCommit message (Collapse)Author
2018-05-31fuse: Ensure posix acls are translated outside of init_user_nsEric W. Biederman
Ensure the translation happens by failing to read or write posix acls when the filesystem has not indicated it supports posix acls. This ensures that modern cached posix acl support is available and used when dealing with posix acls. This is important because only that path has the code to convernt the uids and gids in posix acls into the user namespace of a fuse filesystem. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-20fuse: Support fuse filesystems outside of init_user_nsEric W. Biederman
In order to support mounts from namespaces other than init_user_ns, fuse must translate uids and gids to/from the userns of the process servicing requests on /dev/fuse. This patch does that, with a couple of restrictions on the namespace: - The userns for the fuse connection is fixed to the namespace from which /dev/fuse is opened. - The namespace must be the same as s_user_ns. These restrictions simplify the implementation by avoiding the need to pass around userns references and by allowing fuse to rely on the checks in setattr_prepare for ownership changes. Either restriction could be relaxed in the future if needed. For cuse the userns used is the opener of /dev/cuse. Semantically the cuse support does not appear safe for unprivileged users. Practically the permissions on /dev/cuse only make it accessible to the global root user. If something slips through the cracks in a user namespace the only users who will be able to use the cuse device are those users mapped into the user namespace. Translation in the posix acl is updated to use the uuser namespace of the filesystem. Avoiding cases which might bypass this translation is handled in a following change. This change is stronlgy based on a similar change from Seth Forshee and Dongsu Park. Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Dongsu Park <dongsu@kinvolk.io> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-03-20fuse: return -ECONNABORTED on /dev/fuse read after abortSzymon Lukasz
Currently the userspace has no way of knowing whether the fuse connection ended because of umount or abort via sysfs. It makes it hard for filesystems to free the mountpoint after abort without worrying about removing some new mount. The patch fixes it by returning different errors when userspace reads from /dev/fuse (-ENODEV for umount and -ECONNABORTED for abort). Add a new capability flag FUSE_ABORT_ERROR. If set and the connection is gone because of sysfs abort, reading from the device will return -ECONNABORTED. Signed-off-by: Szymon Lukasz <noh4hss@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-11-27fs: annotate ->poll() instancesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-09-12fuse: getattr cleanupMiklos Szeredi
The refreshed argument isn't used by any caller, get rid of it. Use a helper for just updating the inode (no need to fill in a kstat). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-09-12fuse: honor iocb sync flags on writeMiklos Szeredi
If the IOCB_DSYNC flag is set a sync is not being performed by fuse_file_write_iter. Honor IOCB_DSYNC/IOCB_SYNC by setting O_DYSNC/O_SYNC respectively in the flags filed of the write request. We don't need to sync data or metadata, since fuse_perform_write() does write-through and the filesystem is responsible for updating file times. Original patch by Vitaly Zolotusky. Reported-by: Nate Clark <nate@neworld.us> Cc: Vitaly Zolotusky <vitaly@unitc.com>. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-08-03fuse: Dont call set_page_dirty_lock() for ITER_BVEC pages for async_dioAshish Samant
Commit 8fba54aebbdf ("fuse: direct-io: don't dirty ITER_BVEC pages") fixes the ITER_BVEC page deadlock for direct io in fuse by checking in fuse_direct_io(), whether the page is a bvec page or not, before locking it. However, this check is missed when the "async_dio" mount option is enabled. In this case, set_page_dirty_lock() is called from the req->end callback in request_end(), when the fuse thread is returning from userspace to respond to the read request. This will cause the same deadlock because the bvec condition is not checked in this path. Here is the stack of the deadlocked thread, while returning from userspace: [13706.656686] INFO: task glusterfs:3006 blocked for more than 120 seconds. [13706.657808] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [13706.658788] glusterfs D ffffffff816c80f0 0 3006 1 0x00000080 [13706.658797] ffff8800d6713a58 0000000000000086 ffff8800d9ad7000 ffff8800d9ad5400 [13706.658799] ffff88011ffd5cc0 ffff8800d6710008 ffff88011fd176c0 7fffffffffffffff [13706.658801] 0000000000000002 ffffffff816c80f0 ffff8800d6713a78 ffffffff816c790e [13706.658803] Call Trace: [13706.658809] [<ffffffff816c80f0>] ? bit_wait_io_timeout+0x80/0x80 [13706.658811] [<ffffffff816c790e>] schedule+0x3e/0x90 [13706.658813] [<ffffffff816ca7e5>] schedule_timeout+0x1b5/0x210 [13706.658816] [<ffffffff81073ffb>] ? gup_pud_range+0x1db/0x1f0 [13706.658817] [<ffffffff810668fe>] ? kvm_clock_read+0x1e/0x20 [13706.658819] [<ffffffff81066909>] ? kvm_clock_get_cycles+0x9/0x10 [13706.658822] [<ffffffff810f5792>] ? ktime_get+0x52/0xc0 [13706.658824] [<ffffffff816c6f04>] io_schedule_timeout+0xa4/0x110 [13706.658826] [<ffffffff816c8126>] bit_wait_io+0x36/0x50 [13706.658828] [<ffffffff816c7d06>] __wait_on_bit_lock+0x76/0xb0 [13706.658831] [<ffffffffa0545636>] ? lock_request+0x46/0x70 [fuse] [13706.658834] [<ffffffff8118800a>] __lock_page+0xaa/0xb0 [13706.658836] [<ffffffff810c8500>] ? wake_atomic_t_function+0x40/0x40 [13706.658838] [<ffffffff81194d08>] set_page_dirty_lock+0x58/0x60 [13706.658841] [<ffffffffa054d968>] fuse_release_user_pages+0x58/0x70 [fuse] [13706.658844] [<ffffffffa0551430>] ? fuse_aio_complete+0x190/0x190 [fuse] [13706.658847] [<ffffffffa0551459>] fuse_aio_complete_req+0x29/0x90 [fuse] [13706.658849] [<ffffffffa05471e9>] request_end+0xd9/0x190 [fuse] [13706.658852] [<ffffffffa0549126>] fuse_dev_do_write+0x336/0x490 [fuse] [13706.658854] [<ffffffffa054963e>] fuse_dev_write+0x6e/0xa0 [fuse] [13706.658857] [<ffffffff812a9ef3>] ? security_file_permission+0x23/0x90 [13706.658859] [<ffffffff81205300>] do_iter_readv_writev+0x60/0x90 [13706.658862] [<ffffffffa05495d0>] ? fuse_dev_splice_write+0x350/0x350 [fuse] [13706.658863] [<ffffffff812062a1>] do_readv_writev+0x171/0x1f0 [13706.658866] [<ffffffff810b3d00>] ? try_to_wake_up+0x210/0x210 [13706.658868] [<ffffffff81206361>] vfs_writev+0x41/0x50 [13706.658870] [<ffffffff81206496>] SyS_writev+0x56/0xf0 [13706.658872] [<ffffffff810257a1>] ? syscall_trace_leave+0xf1/0x160 [13706.658874] [<ffffffff816cbb2e>] system_call_fastpath+0x12/0x71 Fix this by making should_dirty a fuse_io_priv parameter that can be checked in fuse_aio_complete_req(). Reported-by: Tiger Yang <tiger.yang@oracle.com> Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-05-10Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: "Support for pid namespaces from Seth and refcount_t work from Elena" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: Add support for pid namespaces fuse: convert fuse_conn.count from atomic_t to refcount_t fuse: convert fuse_req.count from atomic_t to refcount_t fuse: convert fuse_file.count from atomic_t to refcount_t
2017-04-20fuse: Get rid of bdi_initializedJan Kara
It is not needed anymore since bdi is initialized whenever superblock exists. CC: Miklos Szeredi <miklos@szeredi.hu> CC: linux-fsdevel@vger.kernel.org Suggested-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-20fuse: Convert to separately allocated bdiJan Kara
Allocate struct backing_dev_info separately instead of embedding it inside the superblock. This unifies handling of bdi among users. CC: Miklos Szeredi <miklos@szeredi.hu> CC: linux-fsdevel@vger.kernel.org Acked-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-18fuse: Add support for pid namespacesSeth Forshee
When the userspace process servicing fuse requests is running in a pid namespace then pids passed via the fuse fd are not being translated into that process' namespace. Translation is necessary for the pid to be useful to that process. Since no use case currently exists for changing namespaces all translations can be done relative to the pid namespace in use when fuse_conn_init() is called. For fuse this translates to mount time, and for cuse this is when /dev/cuse is opened. IO for this connection from another namespace will return errors. Requests from processes whose pid cannot be translated into the target namespace will have a value of 0 for in.h.pid. File locking changes based on previous work done by Eric Biederman. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-18fuse: convert fuse_conn.count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-18fuse: convert fuse_req.count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-04-18fuse: convert fuse_file.count from atomic_t to refcount_tElena Reshetova
refcount_t type and corresponding API should be used instead of atomic_t when the variable is used as a reference counter. This allows to avoid accidental refcounter overflows that might lead to use-after-free situations. Signed-off-by: Elena Reshetova <elena.reshetova@intel.com> Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David Windsor <dwindsor@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-03-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse update from Miklos Szeredi: "A bugfix and cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: release: private_data cannot be NULL fuse: cleanup fuse_file refcounting fuse: add missing FR_FORCE
2017-02-22fuse: cleanup fuse_file refcountingMiklos Szeredi
struct fuse_file is stored in file->private_data. Make this always be a counting reference for consistency. This also allows fuse_sync_release() to call fuse_file_put() instead of partially duplicating its functionality. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-01-14locking/atomic, kref: Add KREF_INIT()Peter Zijlstra
Since we need to change the implementation, stop exposing internals. Provide KREF_INIT() to allow static initialization of struct kref. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-18fuse: fix root dentry initializationMiklos Szeredi
Add missing dentry initialization to root dentry. Fixes: f75fdf22b0a8 ("fuse: don't use ->d_time") Reported-by: Andreas Reis <andreas.reis@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-10Merge branch 'work.misc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted misc bits and pieces. There are several single-topic branches left after this (rename2 series from Miklos, current_time series from Deepa Dinamani, xattr series from Andreas, uaccess stuff from from me) and I'd prefer to send those separately" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (39 commits) proc: switch auxv to use of __mem_open() hpfs: support FIEMAP cifs: get rid of unused arguments of CIFSSMBWrite() posix_acl: uapi header split posix_acl: xattr representation cleanups fs/aio.c: eliminate redundant loads in put_aio_ring_file fs/internal.h: add const to ns_dentry_operations declaration compat: remove compat_printk() fs/buffer.c: make __getblk_slow() static proc: unsigned file descriptors fs/file: more unsigned file descriptors fs: compat: remove redundant check of nr_segs cachefiles: Fix attempt to read i_blocks after deleting file [ver #2] cifs: don't use memcpy() to copy struct iov_iter get rid of separate multipage fault-in primitives fs: Avoid premature clearing of capabilities fs: Give dentry to inode_change_ok() instead of inode fuse: Propagate dentry down to inode_change_ok() ceph: Propagate dentry down to inode_change_ok() xfs: Propagate dentry down to inode_change_ok() ...
2016-10-01fuse: get rid of fc->flagsMiklos Szeredi
Only two flags: "default_permissions" and "allow_other". All other flags are handled via bitfields. So convert these two as well. They don't change during the lifetime of the filesystem, so this is quite safe. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-01fuse: Add posix ACL supportSeth Forshee
Add a new INIT flag, FUSE_POSIX_ACL, for negotiating ACL support with userspace. When it is set in the INIT response, ACL support will be enabled. ACL support also implies "default_permissions". When ACL support is enabled, the kernel will cache and have responsibility for enforcing ACLs. ACL xattrs will be passed to userspace, which is responsible for updating the ACLs in the filesystem, keeping the file mode in sync, and inheritance of default ACLs when new filesystem nodes are created. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-01fuse: handle killpriv in userspace fsMiklos Szeredi
Only userspace filesystem can do the killing of suid/sgid without races. So introduce an INIT flag and negotiate support for this. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-10-01fuse: Use generic xattr opsSeth Forshee
In preparation for posix acl support, rework fuse to use xattr handlers and the generic setxattr/getxattr/listxattr callbacks. Split the xattr code out into it's own file, and promote symbols to module-global scope as needed. Functionally these changes have no impact, as fuse still uses a single handler for all xattrs which uses the old callbacks. Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-22fuse: Propagate dentry down to inode_change_ok()Jan Kara
To avoid clearing of capabilities or security related extended attributes too early, inode_change_ok() will need to take dentry instead of inode. Propagate it down to fuse_do_setattr(). Acked-by: Miklos Szeredi <mszeredi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2016-08-06Merge branch 'work.const-qstr' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull qstr constification updates from Al Viro: "Fairly self-contained bunch - surprising lot of places passes struct qstr * as an argument when const struct qstr * would suffice; it complicates analysis for no good reason. I'd prefer to feed that separately from the assorted fixes (those are in #for-linus and with somewhat trickier topology)" * 'work.const-qstr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qstr: constify instances in adfs qstr: constify instances in lustre qstr: constify instances in f2fs qstr: constify instances in ext2 qstr: constify instances in vfat qstr: constify instances in procfs qstr: constify instances in fuse qstr constify instances in fs/dcache.c qstr: constify instances in nfs qstr: constify instances in ocfs2 qstr: constify instances in autofs4 qstr: constify instances in hfs qstr: constify instances in hfsplus qstr: constify instances in logfs qstr: constify dentry_init_security
2016-07-30qstr: constify instances in fuseAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-06-30fuse: improve aio directIO write performance for size extending writesAshish Sangwan
While sending the blocking directIO in fuse, the write request is broken into sub-requests, each of default size 128k and all the requests are sent in non-blocking background mode if async_dio mode is supported by libfuse. The process which issue the write wait for the completion of all the sub-requests. Sending multiple requests parallely gives a chance to perform parallel writes in the user space fuse implementation if it is multi-threaded and hence improves the performance. When there is a size extending aio dio write, we switch to blocking mode so that we can properly update the size of the file after completion of the writes. However, in this situation all the sub-requests are sent in serialized manner where the next request is sent only after receiving the reply of the current request. Hence the multi-threaded user space implementation is not utilized properly. This patch changes the size extending aio dio behavior to exactly follow blocking dio. For multi threaded fuse implementation having 10 threads and using buffer size of 64MB to perform async directIO, we are getting double the speed. Signed-off-by: Ashish Sangwan <ashishsangwan2@gmail.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-06-30fuse: serialize dirops by defaultMiklos Szeredi
Negotiate with userspace filesystems whether they support parallel readdir and lookup. Disable parallelism by default for fear of breaking fuse filesystems. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Fixes: 9902af79c01a ("parallel lookups: actual switch to rwsem") Fixes: d9b3dbdcfd62 ("fuse: switch to ->iterate_shared()")
2016-03-14fuse: Add reference counting for fuse_io_privSeth Forshee
The 'reqs' member of fuse_io_priv serves two purposes. First is to track the number of oustanding async requests to the server and to signal that the io request is completed. The second is to be a reference count on the structure to know when it can be freed. For sync io requests these purposes can be at odds. fuse_direct_IO() wants to block until the request is done, and since the signal is sent when 'reqs' reaches 0 it cannot keep a reference to the object. Yet it needs to use the object after the userspace server has completed processing requests. This leads to some handshaking and special casing that it needlessly complicated and responsible for at least one race condition. It's much cleaner and safer to maintain a separate reference count for the object lifecycle and to let 'reqs' just be a count of outstanding requests to the userspace server. Then we can know for sure when it is safe to free the object without any handshaking or special cases. The catch here is that most of the time these objects are stack allocated and should not be freed. Initializing these objects with a single reference that is never released prevents accidental attempts to free the objects. Fixes: 9d5722b7777e ("fuse: handle synchronous iocbs internally") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2015-11-10fuse: add support for SEEK_HOLE and SEEK_DATA in lseekRavishankar N
A useful performance improvement for accessing virtual machine images via FUSE mount. See https://bugzilla.redhat.com/show_bug.cgi?id=1220173 for a use-case for glusterFS. Signed-off-by: Ravishankar N <ravishankar@redhat.com> Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
2015-07-01fuse: separate pqueue for clonesMiklos Szeredi
Make each fuse device clone refer to a separate processing queue. The only constraint on userspace code is that the request answer must be written to the same device clone as it was read off. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-07-01fuse: introduce per-instance fuse_dev structureMiklos Szeredi
Allow fuse device clones to refer to be distinguished. This patch just adds the infrastructure by associating a separate "struct fuse_dev" with each clone. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: add req flag for private listMiklos Szeredi
When an unlocked request is aborted, it is moved from fpq->io to a private list. Then, after unlocking fpq->lock, the private list is processed and the requests are finished off. To protect the private list, we need to mark the request with a flag, so if in the meantime the request is unlocked the list is not corrupted. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: pqueue lockingMiklos Szeredi
Add a fpq->lock for protecting members of struct fuse_pqueue and FR_LOCKED request flag. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: duplicate ->connected in pqueueMiklos Szeredi
This will allow checking ->connected just with the processing queue lock. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: separate out processing queueMiklos Szeredi
This is just two fields: fc->io and fc->processing. This patch just rearranges the fields, no functional change. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: duplicate ->connected in iqueueMiklos Szeredi
This will allow checking ->connected just with the input queue lock. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: separate out input queueMiklos Szeredi
The input queue contains normal requests (fc->pending), forgets (fc->forget_*) and interrupts (fc->interrupts). There's also fc->waitq and fc->fasync for waking up the readers of the fuse device when a request is available. The fc->reqctr is also moved to the input queue (assigned to the request when the request is added to the input queue. This patch just rearranges the fields, no functional change. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: req state use flagsMiklos Szeredi
Use flags for representing the state in fuse_req. This is needed since req->list will be protected by different locks in different states, hence we'll want the state itself to be split into distinct bits, each protected with the relevant lock in that state. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2015-07-01fuse: simplify req statesMiklos Szeredi
FUSE_REQ_INIT is actually the same state as FUSE_REQ_PENDING and FUSE_REQ_READING and FUSE_REQ_WRITING can be merged into a common FUSE_REQ_IO state. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: use per req lock for lock/unlock_request()Miklos Szeredi
Reuse req->waitq.lock for protecting FR_ABORTED and FR_LOCKED flags. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-07-01fuse: req use bitopsMiklos Szeredi
Finer grained locking will mean there's no single lock to protect modification of bitfileds in fuse_req. So move to using bitops. Can use the non-atomic variants for those which happen while the request definitely has only one reference. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
2015-03-13fuse: handle synchronous iocbs internallyChristoph Hellwig
Based on a patch from Maxim Patlasov <MPatlasov@parallels.com>. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-06fuse: add memory barrier to INITMiklos Szeredi
Theoretically we need to order setting of various fields in fc with fc->initialized. No known bug reports related to this yet. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: introduce fuse_simple_request() helperMiklos Szeredi
The following pattern is repeated many times: req = fuse_get_req_nopages(fc); /* Initialize req->(in|out).args */ fuse_request_send(fc, req); err = req->out.h.error; fuse_put_request(req); Create a new replacement helper: /* Initialize args */ err = fuse_simple_request(fc, &args); In addition to reducing the code size, this will ease moving from the complex arg-based to a simpler page-based I/O on the fuse device. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: reduce max out argsMiklos Szeredi
The third out-arg is never actually used. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: hold inode instead of path after releaseMiklos Szeredi
path_put() in release could trigger a DESTROY request in fuseblk. The possible deadlock was worked around by doing the path_put() with schedule_work(). This complexity isn't needed if we just hold the inode instead of the path. Since we now flush all requests before destroying the super block we can be sure that all held inodes will be dropped. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-12-12fuse: flush requests on umountMiklos Szeredi
Use fuse_abort_conn() instead of fuse_conn_kill() in fuse_put_super(). This flushes and aborts requests still on any queues. But since we've already reset fc->connected, those requests would not be useful anyway and would be flushed when the fuse device is closed. Next patches will rely on requests being flushed before the superblock is destroyed. Use fuse_abort_conn() in cuse_process_init_reply() too, since it makes no difference there, and we can get rid of fuse_conn_kill(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-05-06fuse: pull iov_iter initializations upAl Viro
... to fuse_direct_{read,write}(). ->direct_IO() path uses the iov_iter passed by the caller instead. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-04-28fuse: add renameat2 supportMiklos Szeredi
Support RENAME_EXCHANGE and RENAME_NOREPLACE flags on the userspace ABI. Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 08:55:23 +0000