| Age | Commit message (Collapse) | Author |
|---|
|
Light reported sometimes shinker gets nat_cnt < dirty_nat_cnt resulting in
wrong do_shinker work. Let's avoid to return insane overflowed value by adding
single tracking value.
Reported-by: Light Hsieh <Light.Hsieh@mediatek.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
After commit 0b6d4ca04a86 ("f2fs: don't return vmalloc() memory from
f2fs_kmalloc()"), f2fs_k{m,z}alloc() will not return vmalloc()'ed
memory, so clean up to use kfree() instead of kvfree() to free
vmalloc()'ed memory.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Current compr_blocks of superblock info is not 64bit value. We are
accumulating each i_compr_blocks count of inodes to this value and
those are 64bit values. So, need to change this to 64bit value.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
There are several issues in current background GC algorithm:
- valid blocks is one of key factors during cost overhead calculation,
so if segment has less valid block, however even its age is young or
it locates hot segment, CB algorithm will still choose the segment as
victim, it's not appropriate.
- GCed data/node will go to existing logs, no matter in-there datas'
update frequency is the same or not, it may mix hot and cold data
again.
- GC alloctor mainly use LFS type segment, it will cost free segment
more quickly.
This patch introduces a new algorithm named age threshold based
garbage collection to solve above issues, there are three steps
mainly:
1. select a source victim:
- set an age threshold, and select candidates beased threshold:
e.g.
0 means youngest, 100 means oldest, if we set age threshold to 80
then select dirty segments which has age in range of [80, 100] as
candiddates;
- set candidate_ratio threshold, and select candidates based the
ratio, so that we can shrink candidates to those oldest segments;
- select target segment with fewest valid blocks in order to
migrate blocks with minimum cost;
2. select a target victim:
- select candidates beased age threshold;
- set candidate_radius threshold, search candidates whose age is
around source victims, searching radius should less than the
radius threshold.
- select target segment with most valid blocks in order to avoid
migrating current target segment.
3. merge valid blocks from source victim into target victim with
SSR alloctor.
Test steps:
- create 160 dirty segments:
* half of them have 128 valid blocks per segment
* left of them have 384 valid blocks per segment
- run background GC
Benefit: GC count and block movement count both decrease obviously:
- Before:
- Valid: 86
- Dirty: 1
- Prefree: 11
- Free: 6001 (6001)
GC calls: 162 (BG: 220)
- data segments : 160 (160)
- node segments : 2 (2)
Try to move 41454 blocks (BG: 41454)
- data blocks : 40960 (40960)
- node blocks : 494 (494)
IPU: 0 blocks
SSR: 0 blocks in 0 segments
LFS: 41364 blocks in 81 segments
- After:
- Valid: 87
- Dirty: 0
- Prefree: 4
- Free: 6008 (6008)
GC calls: 75 (BG: 76)
- data segments : 74 (74)
- node segments : 1 (1)
Try to move 12813 blocks (BG: 12813)
- data blocks : 12544 (12544)
- node blocks : 269 (269)
IPU: 0 blocks
SSR: 12032 blocks in 77 segments
LFS: 855 blocks in 2 segments
Signed-off-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix a bug along with pinfile in-mem segment & clean up]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Previous implementation of aligned pinfile allocation will:
- allocate new segment on cold data log no matter whether last used
segment is partially used or not, it makes IOs more random;
- force concurrent cold data/GCed IO going into warm data area, it
can make a bad effect on hot/cold data separation;
In this patch, we introduce a new type of log named 'inmem curseg',
the differents from normal curseg is:
- it reuses existed segment type (CURSEG_XXX_NODE/DATA);
- it only exists in memory, its segno, blkofs, summary will not b
persisted into checkpoint area;
With this new feature, we can enhance scalability of log, special
allocators can be created for purposes:
- pure lfs allocator for aligned pinfile allocation or file
defragmentation
- pure ssr allocator for later feature
So that, let's update aligned pinfile allocation to use this new
inmem curseg fwk.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
- Add to account and show per-log dirty_seg, full_seg and valid_blocks
in debugfs.
- reformat printed info.
TYPE segno secno zoneno dirty_seg full_seg valid_blk
- COLD data: 1523 1523 1523 1 0 399
- WARM data: 769 769 769 20 255 133098
- HOT data: 767 767 767 9 0 167
- Dir dnode: 22 22 22 3 0 70
- File dnode: 722 722 722 14 10 6505
- Indir nodes: 2 2 2 1 0 3
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's show mounted time.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Currently f2fs stats are only available from /d/f2fs/status. This patch
adds some of the f2fs stats to sysfs so that they are accessible even
when debugfs is not mounted.
The following sysfs nodes are added:
-/sys/fs/f2fs/<disk>/free_segments
-/sys/fs/f2fs/<disk>/cp_foreground_calls
-/sys/fs/f2fs/<disk>/cp_background_calls
-/sys/fs/f2fs/<disk>/gc_foreground_calls
-/sys/fs/f2fs/<disk>/gc_background_calls
-/sys/fs/f2fs/<disk>/moved_blocks_foreground
-/sys/fs/f2fs/<disk>/moved_blocks_background
-/sys/fs/f2fs/<disk>/avg_vblocks
Signed-off-by: Hridya Valsaraju <hridya@google.com>
[Jaegeuk Kim: allow STAT_FS without DEBUG_FS]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch tries to support compression in f2fs.
- New term named cluster is defined as basic unit of compression, file can
be divided into multiple clusters logically. One cluster includes 4 << n
(n >= 0) logical pages, compression size is also cluster size, each of
cluster can be compressed or not.
- In cluster metadata layout, one special flag is used to indicate cluster
is compressed one or normal one, for compressed cluster, following metadata
maps cluster to [1, 4 << n - 1] physical blocks, in where f2fs stores
data including compress header and compressed data.
- In order to eliminate write amplification during overwrite, F2FS only
support compression on write-once file, data can be compressed only when
all logical blocks in file are valid and cluster compress ratio is lower
than specified threshold.
- To enable compression on regular inode, there are three ways:
* chattr +c file
* chattr +c dir; touch dir/file
* mount w/ -o compress_extension=ext; touch file.ext
Compress metadata layout:
[Dnode Structure]
+-----------------------------------------------+
| cluster 1 | cluster 2 | ......... | cluster N |
+-----------------------------------------------+
. . . .
. . . .
. Compressed Cluster . . Normal Cluster .
+----------+---------+---------+---------+ +---------+---------+---------+---------+
|compr flag| block 1 | block 2 | block 3 | | block 1 | block 2 | block 3 | block 4 |
+----------+---------+---------+---------+ +---------+---------+---------+---------+
. .
. .
. .
+-------------+-------------+----------+----------------------------+
| data length | data chksum | reserved | compressed data |
+-------------+-------------+----------+----------------------------+
Changelog:
20190326:
- fix error handling of read_end_io().
- remove unneeded comments in f2fs_encrypt_one_page().
20190327:
- fix wrong use of f2fs_cluster_is_full() in f2fs_mpage_readpages().
- don't jump into loop directly to avoid uninitialized variables.
- add TODO tag in error path of f2fs_write_cache_pages().
20190328:
- fix wrong merge condition in f2fs_read_multi_pages().
- check compressed file in f2fs_post_read_required().
20190401
- allow overwrite on non-compressed cluster.
- check cluster meta before writing compressed data.
20190402
- don't preallocate blocks for compressed file.
- add lz4 compress algorithm
- process multiple post read works in one workqueue
Now f2fs supports processing post read work in multiple workqueue,
it shows low performance due to schedule overhead of multiple
workqueue executing orderly.
20190921
- compress: support buffered overwrite
C: compress cluster flag
V: valid block address
N: NEW_ADDR
One cluster contain 4 blocks
before overwrite after overwrite
- VVVV -> CVNN
- CVNN -> VVVV
- CVNN -> CVNN
- CVNN -> CVVV
- CVVV -> CVNN
- CVVV -> CVVV
20191029
- add kconfig F2FS_FS_COMPRESSION to isolate compression related
codes, add kconfig F2FS_FS_{LZO,LZ4} to cover backend algorithm.
note that: will remove lzo backend if Jaegeuk agreed that too.
- update codes according to Eric's comments.
20191101
- apply fixes from Jaegeuk
20191113
- apply fixes from Jaegeuk
- split workqueue for fsverity
20191216
- apply fixes from Jaegeuk
20200117
- fix to avoid NULL pointer dereference
[Jaegeuk Kim]
- add tracepoint for f2fs_{,de}compress_pages()
- fix many bugs and add some compression stats
- fix overwrite/mmap bugs
- address 32bit build error, reported by Geert.
- bug fixes when handling errors and i_compressed_blocks
Reported-by: <noreply@ellerman.id.au>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Remove duplicate sbi->aw_cnt stats counter that tracks
the number of atomic files currently opened (it also shows
incorrect value sometimes). Use more relit lable sbi->atomic_files
to show in the stats.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In fill_super() and put_super(), f2fs_destroy_stats() is called
in prior to f2fs_destroy_segment_manager(), so if current
sbi can still be visited in global stat list, SM_I(sbi) should be
released yet.
For this reason, SM_I(sbi) does not need to be checked in
update_general_status().
Thank Chao Yu for advice.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.
This feature can be used for adjusting partition sizes online.
History of the patch:
Sahitya Tummala:
- Add this ioctl for f2fs_compat_ioctl() as well.
- Fix debugfs status to reflect the online resize changes.
- Fix potential race between online resize path and allocate new data
block path or gc path.
Others:
- Rename some identifiers.
- Add some error handling branches.
- Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
- Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
- During resizing, force to empty sit_journal and forbid adding new
entries to it, in order to avoid invalid segno in journal after resize.
- Reduce sbi->user_block_count before resize starts.
- Commit the updated superblock first, and then update in-memory metadata
only when the former succeeds.
- Target block count must align to sections.
- Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
- In free_segment_range(), reduce granularity of gc_mutex.
- Add protection on curseg migration.
- Add freeze_bdev() and thaw_bdev() for resize fs.
- Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
- Recover super_block and FS metadata when resize fails.
- No need to clear CP_FSCK_FLAG in update_ckpt_flags().
- Clean up the sb and fs metadata update functions for resize_fs.
Geert Uytterhoeven:
- Use div_u64*() for 64-bit divisions
Arnd Bergmann:
- Not all architectures support get_user() with a 64-bit argument:
ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
Use copy_from_user() here, this will always work.
Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
When calling debugfs functions, there is no need to ever check the
return value. The function can work or not, but the code logic should
never do something different based on this.
Cc: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Chao Yu <yuchao0@huawei.com>
Cc: linux-f2fs-devel@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This fixes wrong access of address spaces of node and meta inodes after iput.
Fixes: 60aa4d5536ab ("f2fs: fix use-after-free issue when accessing sbi->stat_info")
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Let's use "queued" instead of "issuing".
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
One report says memalloc failure during mount.
(unwind_backtrace) from [<c010cd4c>] (show_stack+0x10/0x14)
(show_stack) from [<c049c6b8>] (dump_stack+0x8c/0xa0)
(dump_stack) from [<c024fcf0>] (warn_alloc+0xc4/0x160)
(warn_alloc) from [<c0250218>] (__alloc_pages_nodemask+0x3f4/0x10d0)
(__alloc_pages_nodemask) from [<c0270450>] (kmalloc_order_trace+0x2c/0x120)
(kmalloc_order_trace) from [<c03fa748>] (build_node_manager+0x35c/0x688)
(build_node_manager) from [<c03de494>] (f2fs_fill_super+0xf0c/0x16cc)
(f2fs_fill_super) from [<c02a5864>] (mount_bdev+0x15c/0x188)
(mount_bdev) from [<c03da624>] (f2fs_mount+0x18/0x20)
(f2fs_mount) from [<c02a68b8>] (mount_fs+0x158/0x19c)
(mount_fs) from [<c02c3c9c>] (vfs_kern_mount+0x78/0x134)
(vfs_kern_mount) from [<c02c76ac>] (do_mount+0x474/0xca4)
(do_mount) from [<c02c8264>] (SyS_mount+0x94/0xbc)
(SyS_mount) from [<c0108180>] (ret_fast_syscall+0x0/0x48)
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds f2fs_dio_submit_bio() to hook submit_io/end_io functions
in direct IO path, in order to account DIO.
Later, we will add this count into is_idle() to let background GC/Discard
thread be aware of DIO.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Introduce a wrapper __is_large_section() to clean up codes.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds issued read IO counts which is under block layer.
Chao modified a bit, since:
Below race can cause reversed reference on F2FS_RD_DATA, there is
the same issue in f2fs_submit_page_bio(), fix them by relocate
__submit_bio() and inc_page_count.
Thread A Thread B
- f2fs_write_begin
- f2fs_submit_page_read
- __submit_bio
- f2fs_read_end_io
- __read_end_io
- dec_page_count(, F2FS_RD_DATA)
- inc_page_count(, F2FS_RD_DATA)
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Note that, it requires "f2fs: return correct errno in f2fs_gc".
This adds a lightweight non-persistent snapshotting scheme to f2fs.
To use, mount with the option checkpoint=disable, and to return to
normal operation, remount with checkpoint=enable. If the filesystem
is shut down before remounting with checkpoint=enable, it will revert
back to its apparent state when it was first mounted with
checkpoint=disable. This is useful for situations where you wish to be
able to roll back the state of the disk in case of some critical
failure.
Signed-off-by: Daniel Rosenberg <drosen@google.com>
[Jaegeuk Kim: use SB_RDONLY instead of MS_RDONLY]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds to account skip count of background GC, and show stat
info via 'status' debugfs entry.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch supports to account meta IO, it enables to show write IO
from f2fs more comprehensively via 'status' debugfs entry.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Remove the verbose license text from f2fs files and replace them with
SPDX tags. This does not change the license of any of the code.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
https://bugzilla.kernel.org/show_bug.cgi?id=200951
These is a NULL pointer dereference issue reported in bugzilla:
Hi,
in the setup there is a SATA SSD connected to a SATA-to-USB bridge.
The disc is "Samsung SSD 850 PRO 256G" which supports TRIM.
There are four partitions:
sda1: FAT /boot
sda2: F2FS /
sda3: F2FS /home
sda4: F2FS
The bridge is ASMT1153e which uses the "uas" driver.
There is no TRIM pass-through, so, when mounting it reports:
mounting with "discard" option, but the device does not support discard
The USB host is USB3.0 and UASP capable. It is the one on RK3399.
Given this everything works fine, except there is no TRIM support.
In order to enable TRIM a new UDEV rule is added [1]:
/etc/udev/rules.d/10-sata-bridge-trim.rules:
ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap"
After reboot any F2FS write hangs forever and dmesg reports:
Unable to handle kernel NULL pointer dereference
Also tested on a x86_64 system: works fine even with TRIM enabled.
same disc
same bridge
different usb host controller
different cpu architecture
not root filesystem
Regards,
Vicenç.
[1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280
Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122
[000000000000003e] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington
CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1
Hardware name: Sapphire-RK3399 Board (DT)
pstate: 00000005 (nzcv daif -PAN -UAO)
pc : update_sit_entry+0x304/0x4b0
lr : update_sit_entry+0x108/0x4b0
sp : ffff00000ca13bd0
x29: ffff00000ca13bd0 x28: 000000000000003e
x27: 0000000000000020 x26: 0000000000080000
x25: 0000000000000048 x24: ffff8000ebb85cf8
x23: 0000000000000253 x22: 00000000ffffffff
x21: 00000000000535f2 x20: 00000000ffffffdf
x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8
x17: 0000000007ce6926 x16: 000000001c83ffa8
x15: 0000000000000000 x14: ffff8000f602df90
x13: 0000000000000006 x12: 0000000000000040
x11: 0000000000000228 x10: 0000000000000000
x9 : 0000000000000000 x8 : 0000000000000000
x7 : 00000000000535f2 x6 : ffff8000ebff3440
x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8
x3 : 00000000ffffffff x2 : 0000000000000020
x1 : 0000000000000000 x0 : ffff8000eb9e5800
Process nvim (pid: 957, stack limit = 0x0000000063a78320)
Call trace:
update_sit_entry+0x304/0x4b0
f2fs_invalidate_blocks+0x98/0x140
truncate_node+0x90/0x400
f2fs_remove_inode_page+0xe8/0x340
f2fs_evict_inode+0x2b0/0x408
evict+0xe0/0x1e0
iput+0x160/0x260
do_unlinkat+0x214/0x298
__arm64_sys_unlinkat+0x3c/0x68
el0_svc_handler+0x94/0x118
el0_svc+0x8/0xc
Code: f9400800 b9488400 36080140 f9400f01 (387c4820)
---[ end trace a0f21a307118c477 ]---
The reason is it is possible to enable discard flag on block queue via
UDEV, but during mount, f2fs will initialize se->discard_map only if
this flag is set, once the flag is set after mount, f2fs may dereference
NULL pointer on se->discard_map.
So this patch does below changes to fix this issue:
- initialize and update se->discard_map all the time.
- don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag
during mount.
- don't issue small discard on zoned block device.
- introduce some functions to enhance the readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch used f2fs_bitmap_size macro to calculate mem used by
free nid bitmap, and stat used mem including aligned part.
Signed-off-by: Yunlei He <heyunlei@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
f2fs doesn't allow abuse on atomic write class interface, so except
limiting in-mem pages' total memory usage capacity, we need to limit
atomic-write usage as well when filesystem is seriously fragmented,
otherwise we may run into infinite loop during foreground GC because
target blocks in victim segment are belong to atomic opened file for
long time.
Now, we will detect failure due to atomic write in foreground GC, if
the count exceeds threshold, we will drop all atomic written data in
cache, by this, I expect it can keep our system running safely to
prevent Dos attack.
In addition, his patch adds to show GC skip information in debugfs,
now it just shows count of skipped caused by atomic write.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduces f2fs_kzalloc based on f2fs_kmalloc in order to
support error injection for kzalloc().
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
We forgot to remov memory footprint accounting of per-cpu type
variables, fix it.
Fixes: 35782b233f37 ("f2fs: remove percpu_count due to performance regression")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
During mkfs, quota sysfiles have already occupied nid resource,
it needs to adjust remaining available nid count in kernel side.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch shows # of dirty pages and # of hidden quota files.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch shows whether checkpoint met any error case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
It needs to stat size of ino management cache with all type instead of
orphan ino type.
Fixes: 652be55162dc ("f2fs: show # of orphan inodes")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
As Fan Li reported, there is no user traversing nid_list[ALLOC_NID_LIST]
which is used for tracking preallocated nids. Let's drop it, and only
track preallocated nids in free_nid_root radix-tree.
Reported-by: Fan Li <fanofcode.li@samsung.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds to show flush list status in sysfs.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds an entry in f2fs/status to show # of available nids.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds to account undiscard blocks.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
|
|
This patch cleans several macros by introducing:
- BLKS_PER_SEC
- GET_SEC_FROM_SEG
- GET_SEG_FROM_SEC
- GET_ZONE_FROM_SEC
- GET_ZONE_FROM_SEG
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch cleans up get_valid_blocks, which has no functional change.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Adds to count discard command entry and show the number in debugfs,
also fix to add cost of discard command cache into total comsumed
memory footprint.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Show historical count of flush command and discard command.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds to show the max number of volatile operations which are
conducting concurrently.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The memory size of f2fs_stat_info also should be calculated.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds to account free nids for each NAT blocks, and while
scanning all free nid bitmap, do check count and skip lookuping in
full NAT block.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
In scenario of intensively node allocation, free nids will be ran out
soon, then it needs to stop to load free nids by traversing NAT blocks,
in worse case, if NAT blocks does not be cached in memory, it generates
IOs which slows down our foreground operations.
In order to speed up node allocation, in this patch we introduce a new
free_nid_bitmap array, so there is an bitmap table for each NAT block,
Once the NAT block is loaded, related bitmap cache will be switched on,
and bitmap will be set during traversing nat entries in NAT block, later
we can query and update nid usage status in memory completely.
With such implementation, I expect performance of node allocation can be
improved in the long-term after filesystem image is mounted.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patches adds bitmaps to represent empty or full NAT blocks containing
free nid entries.
If we can find valid crc|cp_ver in the last block of checkpoint pack, we'll
use these bitmaps when building free nids. In order to avoid checkpointing
burden, up-to-date bitmaps will be flushed only during umount time. So,
normally we can get this gain, but when power-cut happens, we rely on fsck.f2fs
which recovers this bitmap again.
After this patch, we build free nids from nid #0 at mount time to make more
full NAT blocks, but in runtime, we check empty NAT blocks to load free nids
without loading any NAT pages from disk.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch shows cached # of APPEND and UPDATE inode entries.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds stat information for flush and discard commands.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch adds discard_cmd_control with the existing discarding controls.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch modifies stat information more clearly.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
