summaryrefslogtreecommitdiffstats
path: root/fs/btrfs
AgeCommit message (Collapse)Author
2012-01-17Merge branch 'btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
* 'btrfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: btrfs: take allocation of ->tree_root into open_ctree() btrfs: let ->s_fs_info point to fs_info, not root... btrfs: consolidate failure exits in btrfs_mount() a bit btrfs: make free_fs_info() call ->kill_sb() unconditional btrfs: merge free_fs_info() calls on fill_super failures btrfs: kill pointless reassignment of ->s_fs_info in btrfs_fill_super() btrfs: make open_ctree() return int btrfs: sanitizing ->fs_info, part 5 btrfs: sanitizing ->fs_info, part 4 btrfs: sanitizing ->fs_info, part 3 btrfs: sanitizing ->fs_info, part 2 btrfs: sanitizing ->fs_info, part 1 btrfs: fix a deadlock in btrfs_scan_one_device() btrfs: fix mount/umount race btrfs: get ->kill_sb() of its own btrfs: preparation to fixing mount/umount race
2012-01-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (62 commits) Btrfs: use larger system chunks Btrfs: add a delalloc mutex to inodes for delalloc reservations Btrfs: space leak tracepoints Btrfs: protect orphan block rsv with spin_lock Btrfs: add allocator tracepoints Btrfs: don't call btrfs_throttle in file write Btrfs: release space on error in page_mkwrite Btrfs: fix btrfsck error 400 when truncating a compressed Btrfs: do not use btrfs_end_transaction_throttle everywhere Btrfs: add balance progress reporting Btrfs: allow for resuming restriper after it was paused Btrfs: allow for canceling restriper Btrfs: allow for pausing restriper Btrfs: add skip_balance mount option Btrfs: recover balance on mount Btrfs: save balance parameters to disk Btrfs: soft profile changing mode (aka soft convert) Btrfs: implement online profile changing Btrfs: do not reduce profile in do_chunk_alloc() Btrfs: virtual address space subset filter ... Fix up trivial conflict in fs/btrfs/ioctl.c due to the use of the new mnt_drop_write_file() helper.
2012-01-16Btrfs: use larger system chunksChris Mason
system chunks by default are very small. This makes them slightly larger and also fixes the conditional checks to make sure we don't allocate a billion of them at once. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Btrfs: add a delalloc mutex to inodes for delalloc reservationsJosef Bacik
I was using i_mutex for this, but we're getting bogus lockdep warnings by doing that and theres no real way to get rid of those, so just stop using i_mutex to protect delalloc metadata reservations and use a delalloc mutex instead. This shouldn't be contended often at all, only if you are writing and mmap writing to the file at the same time. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16Btrfs: space leak tracepointsJosef Bacik
This in addition to a script in my btrfs-tracing tree will help track down space leaks when we're getting space left over in block groups on umount. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16Btrfs: protect orphan block rsv with spin_lockJosef Bacik
We've been seeing warnings coming out of the orphan commit stuff forever from ceph. Turns out it's because we're racing with checking if the orphan block reserve is set, because we clear it outside of the spin_lock. So leave the normal fastpath checks where they are, but take the spin_lock and _recheck_ to make sure we haven't had an orphan block rsv added in the meantime. Then clear the root's orphan block rsv and release the lock. With this patch a user said the warnings went away and they usually showed up pretty soon after he started ceph. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16Btrfs: add allocator tracepointsJosef Bacik
I used these tracepoints when figuring out what the cluster stuff was doing, so add them to mainline in case we need to profile this stuff again. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com>
2012-01-16Btrfs: don't call btrfs_throttle in file writeJosef Bacik
Btrfs_throttle will make us wait if there is a currently committing transaction until we can open new transactions, which is ridiculous since we don't actually start any transactions within the file write path anyway, so all this does is introduce big latencies if we have a sync/fsync heavy workload going on while somebody else is trying to do work. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Btrfs: release space on error in page_mkwriteJosef Bacik
If updating the inode gave us an ENOSPC we were just returning in page_mkwrite, which is a problem since we make our reservation right before trying to update the inode, so fix the out label so that we actually free our reservation. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Btrfs: fix btrfsck error 400 when truncating a compressedMiao Xie
Reproduce steps: # mkfs.btrfs /dev/sdb5 # mount /dev/sdb5 -o compress=lzo /mnt # dd if=/dev/zero of=/mnt/tmpfile bs=128K count=1 # sync # truncate -s 64K /mnt/tmpfile root 5 inode 257 errors 400 This is because of the wrong if condition, which is used to check if we should subtract the bytes of the dropped range from i_blocks/i_bytes of i-node or not. When we truncate a compressed extent, btrfs substracts the bytes of the whole extent, it's wrong. We should substract the real size that we truncate, no matter it is a compressed extent or not. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Btrfs: do not use btrfs_end_transaction_throttle everywhereJosef Bacik
A user reported a problem where things like open with O_CREAT would take up to 30 seconds when he had nfs activity on the same mount. This is because all of our quick metadata operations, like create, symlink etc all do btrfs_end_transaction_throttle, which if the transaction is blocked will wait for the commit to complete before it returns. This adds a ridiculous amount of latency and isn't really needed. The normal btrfs_end_transaction will mark the transaction as blocked and wake the transaction kthread up if it thinks the transaction needs to end (this being in the running out of global reserve space scenario), and this is all that is really needed since we've already done everything we're going to do, we just need to return. This should help people with the latency they were seeing when using synchronous heavy workloads. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Merge branch 'integrity-check-patch-v2' of ↵Chris Mason
git://btrfs.giantdisaster.de/git/btrfs into integration Conflicts: fs/btrfs/ctree.h fs/btrfs/super.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Merge branch 'for-chris' of git://git.jan-o-sch.net/btrfs-unstable into ↵Chris Mason
integration
2012-01-16Merge branch 'for-chris' of git://repo.or.cz/linux-btrfs-devel into integrationChris Mason
Conflicts: fs/btrfs/volumes.c Signed-off-by: Chris Mason <chris.mason@oracle.com>
2012-01-16Merge branch 'restriper' of git://github.com/idryomov/btrfs-unstable into ↵Chris Mason
integration
2012-01-16Btrfs: add balance progress reportingIlya Dryomov
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: allow for resuming restriper after it was pausedIlya Dryomov
Recognize BTRFS_BALANCE_RESUME flag passed from userspace. We use the same heuristics used when recovering balance after a crash to try to start where we left off last time. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: allow for canceling restriperIlya Dryomov
Implement an ioctl for canceling restriper. Currently we wait until relocation of the current block group is finished, in future this can be done by triggering a commit. Balance item is deleted and no memory about the interrupted balance is kept. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: allow for pausing restriperIlya Dryomov
Implement an ioctl for pausing restriper. This pauses the relocation, but balance is still considered to be "in progress": balance item is not deleted, other volume operations cannot be started, etc. If paused in the middle of profile changing operation we will continue making allocations with the target profile. Add a hook to close_ctree() to pause restriper and free its data structures on unmount. (It's safe to unmount when restriper is in "paused" state, we will resume with the same parameters on the next mount) Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: add skip_balance mount optionIlya Dryomov
Since restriper kthread starts involuntarily on mount and can suck cpu and memory bandwidth add a mount option to forcefully skip it. The restriper in that case hangs around in paused state and can be resumed from userspace when it's convenient. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: recover balance on mountIlya Dryomov
On mount, if balance item is found, resume balance in a separate kernel thread. Try to be smart to continue roughly where previous balance (or convert) was interrupted. For chunk types that were being converted to some profile we turn on soft convert, in case of a simple balance we turn on usage filter and relocate only less-than-90%-full chunks of that type. These are just heuristics but they help quite a bit, and can be improved in future. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: save balance parameters to diskIlya Dryomov
Introduce a new btree objectid for storing balance item. The reason is to be able to resume restriper after a crash with the same parameters. Balance item has a very high objectid and goes into tree of tree roots. The key for the new item is as follows: [ BTRFS_BALANCE_OBJECTID ; BTRFS_BALANCE_ITEM_KEY ; 0 ] Older kernels simply ignore it so it's safe to mount with an older kernel and then go back to the newer one. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: soft profile changing mode (aka soft convert)Ilya Dryomov
When doing convert from one profile to another if soft mode is on restriper won't touch chunks that already have the profile we are converting to. This is useful if e.g. half of the FS was converted earlier. The soft mode switch is (like every other filter) per-type. This means that we can convert for example meta chunks the "hard" way while converting data chunks selectively with soft switch. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: implement online profile changingIlya Dryomov
Profile changing is done by launching a balance with BTRFS_BALANCE_CONVERT bits set and target fields of respective btrfs_balance_args structs initialized. Profile reducing code in this case will pick restriper's target profile if it's available instead of doing a blind reduce. If target profile is not yet available it goes back to a plain reduce. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: do not reduce profile in do_chunk_alloc()Ilya Dryomov
Every caller of do_chunk_alloc() feeds it the reduced allocation profile, so stop trying to reduce it one more time. Instead check the validity of the passed profile. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: virtual address space subset filterIlya Dryomov
Select chunks which have at least one byte located inside a given [vstart, vend) virtual address space range. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: devid subset filterIlya Dryomov
Select chunks which have at least one byte of at least one stripe located on a device with devid X in a given [pstart,pend) physical address range. This filter only works when devid filter is turned on. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: devid filterIlya Dryomov
Relocate chunks which have at least one stripe located on a device with devid X. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: usage filterIlya Dryomov
Select chunks that are less than X percent full. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: profiles filterIlya Dryomov
Select chunks based on a given profile mask. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: add basic infrastructure for selective balancingIlya Dryomov
This allows to have a separate set of filters for each chunk type (data,meta,sys). The code however is generic and switch on chunk type is only done once. This commit also adds a type filter: it allows to balance for example meta and system chunks w/o touching data ones. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: add basic restriper infrastructureIlya Dryomov
Add basic restriper infrastructure: extended balancing ioctl and all related ioctl data structures, add data structure for tracking restriper's state to fs_info, etc. The semantics of the old balancing ioctl are fully preserved. Explicitly disallow any volume operations when balance is in progress. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: make avail_*_alloc_bits fields dynamicIlya Dryomov
Currently when new chunks are created respective avail_alloc_bits field is updated to reflect profiles of all chunks present in the system. However when chunks are removed profile bits are never cleared. This patch clears profile bit of respective avail_alloc_bits field when the last chunk with that profile is removed. Restriper needs this to properly operate when "downgrading". Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: add BTRFS_AVAIL_ALLOC_BIT_SINGLE bitIlya Dryomov
Right now on-disk BTRFS_BLOCK_GROUP_* profile bits are used for avail_{data,metadata,system}_alloc_bits fields, which gather info about available allocation profiles in the FS. When chunk is created or read from disk, its profile is OR'ed with the corresponding avail_alloc_bits field. Since SINGLE is denoted by 0 in the on-disk format, currently there is no way to tell when such chunks become avaialble. Restriper needs that information, so add a separate bit for SINGLE profile. This bit is going to be in-memory only, it should never be written out to disk, so it's not a disk format change. However to avoid remappings in future, reserve corresponding on-disk bit. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: introduce masks for chunk type and profileIlya Dryomov
Chunk's type and profile are encoded in u64 flags field. Introduce masks to easily access them. Also fix the type of BTRFS_BLOCK_GROUP_* constants, it should be ULL. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-16Btrfs: get rid of *_alloc_profile fieldsIlya Dryomov
{data,metadata,system}_alloc_profile fields have been unused for a long time now. Get rid of them. Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2012-01-12mm: compaction: introduce sync-light migration for use by compactionMel Gorman
This patch adds a lightweight sync migrate operation MIGRATE_SYNC_LIGHT mode that avoids writing back pages to backing storage. Async compaction maps to MIGRATE_ASYNC while sync compaction maps to MIGRATE_SYNC_LIGHT. For other migrate_pages users such as memory hotplug, MIGRATE_SYNC is used. This avoids sync compaction stalling for an excessive length of time, particularly when copying files to a USB stick where there might be a large number of dirty pages backed by a filesystem that does not support ->writepages. [aarcange@redhat.com: This patch is heavily based on Andrea's work] [akpm@linux-foundation.org: fix fs/nfs/write.c build] [akpm@linux-foundation.org: fix fs/btrfs/disk-io.c build] Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12mm: compaction: determine if dirty pages can be migrated without blocking ↵Mel Gorman
within ->migratepage Asynchronous compaction is used when allocating transparent hugepages to avoid blocking for long periods of time. Due to reports of stalling, there was a debate on disabling synchronous compaction but this severely impacted allocation success rates. Part of the reason was that many dirty pages are skipped in asynchronous compaction by the following check; if (PageDirty(page) && !sync && mapping->a_ops->migratepage != migrate_page) rc = -EBUSY; This skips over all mapping aops using buffer_migrate_page() even though it is possible to migrate some of these pages without blocking. This patch updates the ->migratepage callback with a "sync" parameter. It is the responsibility of the callback to fail gracefully if migration would block. Signed-off-by: Mel Gorman <mgorman@suse.de> Reviewed-by: Rik van Riel <riel@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: Dave Jones <davej@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Andy Isaacson <adi@hexapodia.org> Cc: Nai Xia <nai.xia@gmail.com> Cc: Johannes Weiner <jweiner@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-11Btrfs: fix possible deadlock when opening a seed deviceLi Zefan
The correct lock order is uuid_mutex -> volume_mutex -> chunk_mutex, but when we mount a filesystem which has backing seed devices, we have this lock chain: open_ctree() lock(chunk_mutex); read_chunk_tree(); read_one_dev(); open_seed_devices(); lock(uuid_mutex); and then we hit a lockdep splat. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: update global block_rsv when creating a new block groupLi Zefan
A bug was triggered while using seed device: # mkfs.btrfs /dev/loop1 # btrfstune -S 1 /dev/loop1 # mount -o /dev/loop1 /mnt # btrfs dev add /dev/loop2 /mnt btrfs: block rsv returned -28 ------------[ cut here ]------------ WARNING: at fs/btrfs/extent-tree.c:5969 btrfs_alloc_free_block+0x166/0x396 [btrfs]() ... Call Trace: ... [<f7b7c31c>] btrfs_cow_block+0x101/0x147 [btrfs] [<f7b7eaa6>] btrfs_search_slot+0x1b8/0x55f [btrfs] [<f7b7f844>] btrfs_insert_empty_items+0x42/0x7f [btrfs] [<f7b7f8c1>] btrfs_insert_item+0x40/0x7e [btrfs] [<f7b8ac02>] btrfs_make_block_group+0x243/0x2aa [btrfs] [<f7bb3f53>] __btrfs_alloc_chunk+0x672/0x70e [btrfs] [<f7bb41ff>] init_first_rw_device+0x77/0x13c [btrfs] [<f7bb5a62>] btrfs_init_new_device+0x664/0x9fd [btrfs] [<f7bbb65a>] btrfs_ioctl+0x694/0xdbe [btrfs] [<c04f55f7>] do_vfs_ioctl+0x496/0x4cc [<c04f5660>] sys_ioctl+0x33/0x4f [<c07b9edf>] sysenter_do_call+0x12/0x38 ---[ end trace 906adac595facc7d ]--- Since seed device is readonly, there's no usable space in the filesystem. Afterwards we add a sprout device to it, and the kernel creates a METADATA block group and a SYSTEM block group where comes free space we can reserve, but we still get revervation failure because the global block_rsv hasn't been updated accordingly. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: rewrite btrfs_trim_block_group()Li Zefan
There are various bugs in block group trimming: - It may trim from offset smaller than user-specified offset. - It may trim beyond user-specified range. - It may leak free space for extents smaller than specified minlen. - It may truncate the last trimmed extent thus leak free space. - With mixed extents+bitmaps, some extents may not be trimmed. - With mixed extents+bitmaps, some bitmaps may not be trimmed (even none will be trimmed). Even for those trimmed, not all the free space in the bitmaps will be trimmed. I rewrite btrfs_trim_block_group() and break it into two functions. One is to trim extents only, and the other is to trim bitmaps only. Before patching: # fstrim -v /mnt/ /mnt/: 1496465408 bytes were trimmed After patching: # fstrim -v /mnt/ /mnt/: 2193768448 bytes were trimmed And this matches the total free space: # btrfs fi df /mnt Data: total=3.58GB, used=1.79GB System, DUP: total=8.00MB, used=4.00KB System: total=4.00MB, used=0.00 Metadata, DUP: total=205.12MB, used=97.14MB Metadata: total=8.00MB, used=0.00 Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: simplfy calculation of stripe length for discard operationLi Zefan
For btrfs raid, while discarding a range of space, we'll need to know the start offset and length to discard for each device, and it's done in btrfs_map_block(). However the calculation is a bit complex for raid0 and raid10, so I reimplement it based on a fact that: dev1 dev2 dev3 (raid0) ----------------------------------- s0 s3 s6 s1 s4 s7 s2 s5 Each device has (total_stripes / nr_dev) stripes, or plus one. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: don't pre-allocate btrfs bioLi Zefan
We pre-allocate a btrfs bio with fixed size, and then may re-allocate memory if we find stripes are bigger than the fixed size. But this pre-allocation is not necessary. Also we don't have to calcuate the stripe number twice. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: don't pass a trans handle unnecessarily in volumes.cLi Zefan
Some functions never use the transaction handle passed to them. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: reserve metadata space in btrfs_ioctl_setflags()Li Zefan
Check and reserve space for btrfs_update_inode(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: remove BUG_ON()s in btrfs_ioctl_setflags()Li Zefan
We can recover from errors and return -errno to user space. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: check the return value of io_ctl_init()Li Zefan
It can return -ENOMEM. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: avoid possible NULL deref in io_ctl_drop_pages()Li Zefan
If we run into some failure path in io_ctl_prepare_pages(), io_ctl->pages[] array may have some NULL pointers. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Btrfs: add pinned extents to on-disk free space cache correctlyLi Zefan
I got this while running xfstests: [24256.836098] block group 317849600 has an wrong amount of free space [24256.836100] btrfs: failed to load free space cache for block group 317849600 We should clamp the extent returned by find_first_extent_bit(), so the start of the extent won't smaller than the start of the block group. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
2012-01-11Merge branch 'for-linus' of ↵Li Zefan
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs into for-linus