| Age | Commit message (Collapse) | Author |
|---|
|
It is completely unused now, remove it.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We no longer have recursive locking and there's no need for separate
helpers that allowed the transition to rwsem with minimal code changes.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we're no longer using recursion, rip out all of the supporting
code. Follow up patches will clean up the callers of these functions.
The extent_buffer::lock_owner is still retained as it allows safety
checks in btrfs_init_new_buffer for the case that the free space cache
is corrupted and we try to allocate a block that we are currently using
and have locked in the path.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we're using a rw_semaphore we no longer need to indicate if a
lock is blocking or not, nor do we need to flip the entire path from
blocking to spinning. Remove these helpers and all the places they are
called.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We will need these when we switch to an rwsem, so plumb in the
infrastructure here to use later on. I violate the 80 character limit
some here because it'll be cleaned up later.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Our current tree locking stuff allows us to recurse with read locks if
we're already holding the write lock. This is necessary for the space
cache inode, as we could be holding a lock on the root_tree root when we
need to cache a block group, and thus need to be able to read down the
root_tree to read in the inode cache.
We can get away with this in our current locking, but we won't be able
to with a rwsem. Handle this by purposefully annotating the places
where we require recursion, so that in the future we can maybe come up
with a way to avoid the recursion. In the case of the free space inode,
this will be superseded by the free space tree.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Nested locking with lockdep and everything else refers to lock hierarchy
within the same lock map. This is how we indicate the same locks for
different objects are ok to take in a specific order, for our use case
that would be to take the lock on a leaf and then take a lock on an
adjacent leaf.
What ->lock_nested _actually_ refers to is if we happen to already be
holding the write lock on the extent buffer and we're allowing a read
lock to be taken on that extent buffer, which is recursion. Rename this
so we don't get confused when we switch to a rwsem and have to start
using the _nested helpers.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Sparse reports a warning at btrfs_tree_lock()
warning: context imbalance in btrfs_tree_lock() - wrong count at exit
The root cause is the missing annotation at btrfs_tree_lock()
Add the missing __acquires(&eb->lock) annotation
Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A (D)ouble (R)eader (W)riter (E)xclustion lock is a locking primitive
that allows to have multiple readers or multiple writers but not
multiple readers and writers holding it concurrently.
The code is factored out from the existing open-coded locking scheme
used to exclude pending snapshots from nocow writers and vice-versa.
Current implementation actually favors Readers (that is snapshot
creaters) to writers (nocow writers of the filesystem).
The API provides lock/unlock/trylock for reads and writes.
Formal specification for TLA+ provided by Valentin Schneider is at
https://lore.kernel.org/linux-btrfs/2dcaf81c-f0d3-409e-cb29-733d8b3b4cc9@arm.com/
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The helpers are related to locking so move them there, update comments.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
A nice writeup of the LKMM (Linux Kernel Memory Model) rules for access
once policies can be found here
https://lwn.net/Articles/799218/#Access-Marking%20Policies .
The locked and unlocked access to eb::blocking_writers should be
annotated accordingly, following this:
Writes:
- locked write must use ONCE, may use plain read
- unlocked write must use ONCE
Reads:
- unlocked read must use ONCE
- locked read may use plain read iff not mixed with unlocked read
- unlocked read then locked must use ONCE
There's one difference on the assembly level, where
btrfs_tree_read_lock_atomic and btrfs_try_tree_read_lock used the cached
value and did not reevaluate it after taking the lock. This could have
missed some opportunities to take the lock in case blocking writers
changed between the calls, but the window is just a few instructions
long. As this is in try-lock, the callers handle that.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The increment and decrement was inherited from previous version that
used atomics, switched in commit 06297d8cefca ("btrfs: switch
extent_buffer blocking_writers from atomic to int"). The only possible
values are 0 and 1 so we can set them directly.
The generated assembly (gcc 9.x) did the direct value assignment in
btrfs_set_lock_blocking_write (asm diff after change in 06297d8cefca):
5d: test %eax,%eax
5f: je 62 <btrfs_set_lock_blocking_write+0x22>
61: retq
- 62: lock incl 0x44(%rdi)
- 66: add $0x50,%rdi
- 6a: jmpq 6f <btrfs_set_lock_blocking_write+0x2f>
+ 62: movl $0x1,0x44(%rdi)
+ 69: add $0x50,%rdi
+ 6d: jmpq 72 <btrfs_set_lock_blocking_write+0x32>
The part in btrfs_tree_unlock did a decrement because
BUG_ON(blockers > 1) is probably not a strong hint for the compiler, but
otherwise the output looks safe:
- lock decl 0x44(%rdi)
+ sub $0x1,%eax
+ mov %eax,0x44(%rdi)
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are two ifs that use eb::blocking_writers. As this is a variable
modified inside and outside of locks, we could minimize number of
accesses to avoid problems with getting different results at different
times.
The access here is locked so this can only race with btrfs_tree_unlock
that sets blocking_writers to 0 without lock and unsets the lock owner.
The first branch is taken only if the same thread already holds the
lock, the second if checks for blocking writers. Here we'd either unlock
and wait, or proceed. Both are valid states of the locking protocol.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function belongs to the family of locking functions, so move it
there. The 'noinline' keyword is dropped as it's now an exported
function that does not need it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function belongs to the family of locking functions, so move it
there. The 'noinline' keyword is dropped as it's now an exported
function that does not need it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The function btrfs_assert_tree_locked is used outside of the locking
code so it is exported, however we can make it static inine as it's
fairly trivial.
This is the only locking assertion used in release builds, inlining
improves the text size by 174 bytes and reduces stack consumption in the
callers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
I've noticed that none of the btrfs_assert_*lock* debugging helpers is
inlined, despite they're short and mostly a value update. Making them
inline shaves 67 from the text size, reduces stack consumption and
perhaps also slightly improves the performance due to avoiding
unnecessary calls.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The file ctree.h serves as a header for everything and has become quite
bloated. Split some helpers that are generic and create a new file that
should be the catch-all for code that's not btrfs-specific.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Those were split out of btrfs_clear_lock_blocking_rw by
aa12c02778a9 ("btrfs: split btrfs_clear_lock_blocking_rw to read and write helpers")
however at that time this function was unused due to commit
523983401644 ("Btrfs: kill btrfs_clear_path_blocking"). Put the final
nail in the coffin of those 2 functions.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from
atomic to int") changed the type of blocking_writers but forgot to
adjust relevant code in btrfs_tree_unlock by converting the
smp_mb__after_atomic to smp_mb. This opened up the possibility of a
deadlock due to re-ordering of setting blocking_writers and
checking/waking up the waiter. This particular lockup is explained in a
comment above waitqueue_active() function.
Fix it by converting the memory barrier to a full smp_mb, accounting
for the fact that blocking_writers is a simple integer.
Fixes: 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int")
Tested-by: Johannes Thumshirn <jthumshirn@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The write_locks is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The spinning_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The blocking_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Unlike btrfs_tree_lock() and btrfs_tree_read_lock(), the remaining
functions in locking.c will not sleep, thus doesn't make much sense to
record their execution time.
Those events are introduced mainly for user space tool to audit and
detect lock leakage or dead lock.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are two tree lock events which can sleep:
- btrfs_tree_read_lock()
- btrfs_tree_lock()
Sometimes we may need to look into the concurrency picture of the fs.
For that case, we need the execution time of above two functions and the
owner of @eb.
Here we introduce a trace events for user space tools like bcc, to get
the execution time of above two functions, and get detailed owner info
where eBPF code can't.
All the overhead is hidden behind the trace events, so if events are not
enabled, there is no overhead.
These trace events also output bytenr and generation, allow them to be
pared with unlock events to pin down deadlock.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The member is tracking simple status of the lock, we can use bool for
that and make some room for further space reduction in the structure.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::write_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The write_locks are a simple counter to track locking balance and used
to assert tree locks. Add helpers to make it conditionally work only in
DEBUG builds. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::read_locks become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The read_locks are a simple counter to track locking balance and used to
assert tree locks. Add helpers to make it conditionally work only in
DEBUG builds. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_readers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add helpers for conditional DEBUG build to assert that the extent buffer
spinning_readers constraints are met. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the helpers where open coded. On non-debug builds, the warnings will
not trigger and extent_buffer::spining_writers become unused and can be
moved to the appropriate section, saving a few bytes.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add helpers for conditional DEBUG build to assert that the extent buffer
spinning_writers constraints are met. Will be used in followup patches.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, the number of readers and writers is checked and in case
there are any, wait and redo the locks. There's some duplication
before the branches go back to again label, eg. calling wait_event on
blocking_readers twice.
The sequence is transformed
loop:
* wait for readers
* wait for writers
* write_lock
* check readers, unlock and wait for readers, loop
* check writers, unlock and wait for writers, loop
The new sequence is not exactly the same due to the simplification, for
readers it's slightly faster. For the writers, original code does
* wait for writers
* (loop) wait for readers
* wait for writers -- again
while the new goes directly to the reader check. This should behave the
same on a contended lock with multiple writers and readers, but can
reduce number of times we're waiting on something.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are many callers that hardcode the desired lock type so we can
avoid the switch and call them directly. Split the current function to
two. There are no remaining users of btrfs_clear_lock_blocking_rw so
it's removed. The call sites will be converted in followup patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are many callers that hardcode the desired lock type so we can
avoid the switch and call them directly. Split the current function to
two but leave a helper that still takes the variable lock type to make
current code compile. The call sites will be converted in followup
patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Use the wrappers and reduce the amount of low-level details about the
waitqueue management.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.
The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are atomic operations that imply the barrier for waitqueue_active
mixed in an if-condition.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Reduce number of undocumented barriers out there.
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When a task trying to double lock a extent buffer, there are no
lockdep warning about it because this lock may be in "blocking_lock"
state, and make us hard to debug.
This patch add a WARN_ON() for above condition, it can not report
all deadlock cases(as lock between tasks), but at least helps us
some.
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
|
|
The fair reader/writer locks mean that btrfs_clear_path_blocking needs
to strictly follow lock ordering rules even when we already have
blocking locks on a given path.
Before we can clear a blocking lock on the path, we need to make sure
all of the locks have been converted to blocking. This will remove lock
inversions against anyone spinning in write_lock() against the buffers
we're trying to get read locks on. These inversions didn't exist before
the fair read/writer locks, but now we need to be more careful.
We papered over this deadlock in the past by changing
btrfs_try_read_lock() to be a true trylock against both the spinlock and
the blocking lock. This was slower, and not sufficient to fix all the
deadlocks. This patch adds a btrfs_tree_read_lock_atomic(), which
basically means get the spinlock but trylock on the blocking lock.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reported-by: Patrick Schmid <schmid@phys.ethz.ch>
cc: stable@vger.kernel.org #v3.15+
|
|
The Btrfs tree trylock function is poorly named. It always takes
the spinlock and backs off if the blocking lock is held. This
can lead to surprising lockups because people expect it to really be a
trylock.
This commit makes it a pure trylock, both for the spinlock and the
blocking lock. It also reworks the nested lock handling slightly to
avoid taking the read lock while a spinning write lock might be held.
Signed-off-by: Chris Mason <clm@fb.com>
|
|
Big patch, but all it does is add statics to functions which
are in fact static, then remove the associated dead-code fallout.
removed functions:
btrfs_iref_to_path()
__btrfs_lookup_delayed_deletion_item()
__btrfs_search_delayed_insertion_item()
__btrfs_search_delayed_deletion_item()
find_eb_for_page()
btrfs_find_block_group()
range_straddles_pages()
extent_range_uptodate()
btrfs_file_extent_length()
btrfs_scrub_cancel_devid()
btrfs_start_transaction_lflush()
btrfs_print_tree() is left because it is used for debugging.
btrfs_start_transaction_lflush() and btrfs_reada_detach() are
left for symmetry.
ulist.c functions are left, another patch will take care of those.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
|
This does not change the logic of code, but can save us a read_lock.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
|
