summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2020-08-19Merge tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull VFIO fixes from Alex Williamson: - Fix lockdep issue reported for recursive read-lock (Alex Williamson) - Fix missing unwind in type1 replay function (Alex Williamson) * tag 'vfio-v5.9-rc2' of git://github.com/awilliam/linux-vfio: vfio/type1: Add proper error unwind for vfio_iommu_replay() vfio-pci: Avoid recursive read-lock usage
2020-08-18Merge tag 'spi-fix-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A bunch of fixes that came in for SPI during the merge window. Some from ST and others for their controller, one from Lukas for a race between device addition and controller unregistration and one from fix from Geert for the DT bindings which unbreaks validation" * tag 'spi-fix-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: dt-bindings: lpspi: Add missing boolean type for fsl,spi-only-use-cs1-sel spi: stm32: always perform registers configuration prior to transfer spi: stm32: fixes suspend/resume management spi: stm32: fix stm32_spi_prepare_mbr in case of odd clk_rate spi: stm32: fix fifo threshold level in case of short transfer spi: stm32h7: fix race condition at end of transfer spi: stm32: clear only asserted irq flags on interrupt spi: Prevent adding devices below an unregistering controller
2020-08-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: "Another batch of fixes: 1) Remove nft_compat counter flush optimization, it generates warnings from the refcount infrastructure. From Florian Westphal. 2) Fix BPF to search for build id more robustly, from Jiri Olsa. 3) Handle bogus getopt lengths in ebtables, from Florian Westphal. 4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and Oleksij Rempel. 5) Reset iter properly on mptcp sendmsg() error, from Florian Westphal. 6) Show a saner speed in bonding broadcast mode, from Jarod Wilson. 7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones. 8) Fix double unregister in bonding during namespace tear down, from Cong Wang. 9) Disable RP filter during icmp_redirect selftest, from David Ahern" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits) otx2_common: Use devm_kcalloc() in otx2_config_npa() net: qrtr: fix usage of idr in port assignment to socket selftests: disable rp_filter for icmp_redirect.sh Revert "net: xdp: pull ethernet header off packet after computing skb->protocol" phylink: <linux/phylink.h>: fix function prototype kernel-doc warning mptcp: sendmsg: reset iter on error redux net: devlink: Remove overzealous WARN_ON with snapshots tipc: not enable tipc when ipv6 works as a module tipc: fix uninit skb->data in tipc_nl_compat_dumpit() net: Fix potential wrong skb->protocol in skb_vlan_untag() net: xdp: pull ethernet header off packet after computing skb->protocol ipvlan: fix device features bonding: fix a potential double-unregister can: j1939: add rxtimer for multipacket broadcast session can: j1939: abort multipacket broadcast session when timeout occurs can: j1939: cancel rxtimer on multipacket broadcast session complete can: j1939: fix support for multipacket broadcast message net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs' net: fddi: skfp: cfm: Remove set but unused variable 'oldstate' net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs' ...
2020-08-17otx2_common: Use devm_kcalloc() in otx2_config_npa()Xu Wang
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "devm_kcalloc". Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-17vfio/type1: Add proper error unwind for vfio_iommu_replay()Alex Williamson
The vfio_iommu_replay() function does not currently unwind on error, yet it does pin pages, perform IOMMU mapping, and modify the vfio_dma structure to indicate IOMMU mapping. The IOMMU mappings are torn down when the domain is destroyed, but the other actions go on to cause trouble later. For example, the iommu->domain_list can be empty if we only have a non-IOMMU backed mdev attached. We don't currently check if the list is empty before getting the first entry in the list, which leads to a bogus domain pointer. If a vfio_dma entry is erroneously marked as iommu_mapped, we'll attempt to use that bogus pointer to retrieve the existing physical page addresses. This is the scenario that uncovered this issue, attempting to hot-add a vfio-pci device to a container with an existing mdev device and DMA mappings, one of which could not be pinned, causing a failure adding the new group to the existing container and setting the conditions for a subsequent attempt to explode. To resolve this, we can first check if the domain_list is empty so that we can reject replay of a bogus domain, should we ever encounter this inconsistent state again in the future. The real fix though is to add the necessary unwind support, which means cleaning up the current pinning if an IOMMU mapping fails, then walking back through the r-b tree of DMA entries, reading from the IOMMU which ranges are mapped, and unmapping and unpinning those ranges. To be able to do this, we also defer marking the DMA entry as IOMMU mapped until all entries are processed, in order to allow the unwind to know the disposition of each entry. Fixes: a54eb55045ae ("vfio iommu type1: Add support for mediated devices") Reported-by: Zhiyi Guo <zhguo@redhat.com> Tested-by: Zhiyi Guo <zhguo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-08-17vfio-pci: Avoid recursive read-lock usageAlex Williamson
A down_read on memory_lock is held when performing read/write accesses to MMIO BAR space, including across the copy_to/from_user() callouts which may fault. If the user buffer for these copies resides in an mmap of device MMIO space, the mmap fault handler will acquire a recursive read-lock on memory_lock. Avoid this by reducing the lock granularity. Sequential accesses requiring multiple ioread/iowrite cycles are expected to be rare, therefore typical accesses should not see additional overhead. VGA MMIO accesses are expected to be non-fatal regardless of the PCI memory enable bit to allow legacy probing, this behavior remains with a comment added. ioeventfds are now included in memory access testing, with writes dropped while memory space is disabled. Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Reported-by: Zhiyi Guo <zhguo@redhat.com> Tested-by: Zhiyi Guo <zhguo@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2020-08-16ipvlan: fix device featuresMahesh Bandewar
Processing NETDEV_FEAT_CHANGE causes IPvlan links to lose NETIF_F_LLTX feature because of the incorrect handling of features in ipvlan_fix_features(). --before-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Actual changes: vlan-challenged: off [fixed] tx-lockless: off [fixed] lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: off [fixed] lpaa10:~# --after-- lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# ethtool -K ipvl0 tso off Cannot change tcp-segmentation-offload Could not change any device features lpaa10:~# ethtool -k ipvl0 | grep tx-lockless tx-lockless: on [fixed] lpaa10:~# Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-16bonding: fix a potential double-unregisterCong Wang
When we tear down a network namespace, we unregister all the netdevices within it. So we may queue a slave device and a bonding device together in the same unregister queue. If the only slave device is non-ethernet, it would automatically unregister the bonding device as well. Thus, we may end up unregistering the bonding device twice. Workaround this special case by checking reg_state. Fixes: 9b5e383c11b0 ("net: Introduce unregister_netdevice_many()") Reported-by: syzbot+af23e7f3e0a7e10c8b67@syzkaller.appspotmail.com Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-15Merge tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A few fixes on the block side of things: - Discard granularity fix (Coly) - rnbd cleanups (Guoqing) - md error handling fix (Dan) - md sysfs fix (Junxiao) - Fix flush request accounting, which caused an IO slowdown for some configurations (Ming) - Properly propagate loop flag for partition scanning (Lennart)" * tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block: block: fix double account of flush request's driver tag loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE rnbd: no need to set bi_end_io in rnbd_bio_map_kern rnbd: remove rnbd_dev_submit_io md-cluster: Fix potential error pointer dereference in resize_bitmaps() block: check queue's limits.discard_granularity in __blkdev_issue_discard() md: get sysfs entry after redundancy attr group create
2020-08-15Merge tag 'sh-for-5.9' of git://git.libc.org/linux-shLinus Torvalds
Pull arch/sh updates from Rich Felker: "Cleanup, SECCOMP_FILTER support, message printing fixes, and other changes to arch/sh" * tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits) sh: landisk: Add missing initialization of sh_io_port_base sh: bring syscall_set_return_value in line with other architectures sh: Add SECCOMP_FILTER sh: Rearrange blocks in entry-common.S sh: switch to copy_thread_tls() sh: use the generic dma coherent remap allocator sh: don't allow non-coherent DMA for NOMMU dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig sh: unexport register_trapped_io and match_trapped_io_handler sh: don't include <asm/io_trapped.h> in <asm/io.h> sh: move the ioremap implementation out of line sh: move ioremap_fixed details out of <asm/io.h> sh: remove __KERNEL__ ifdefs from non-UAPI headers sh: sort the selects for SUPERH alphabetically sh: remove -Werror from Makefiles sh: Replace HTTP links with HTTPS ones arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA* sh: stacktrace: Remove stacktrace_ops.stack() sh: machvec: Modernize printing of kernel messages sh: pci: Modernize printing of kernel messages ...
2020-08-15Merge tag 'edac_updates_for_5.9_pt2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull edac fix from Tony Luck: "Fix for the ie31200 driver that missed the first pull" * tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/ie31200: Fallback if host bridge device is already initialized
2020-08-15Merge tag 'acpi-5.9-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI updates from Rafael Wysocki: "Add new hardware support to the ACPI driver for AMD SoCs, the x86 clk driver and the Designware i2c driver (changes from Akshu Agrawal and Pu Wen)" * tag 'acpi-5.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: clk: x86: Support RV architecture ACPI: APD: Add a fmw property is_raven clk: x86: Change name from ST to FCH ACPI: APD: Change name from ST to FCH i2c: designware: Add device HID for Hygon I2C controller
2020-08-15Merge tag 'pm-5.9-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull one more power management update from Rafael Wysocki: "Modify the intel_pstate driver to allow it to work in the passive mode with hardware-managed P-states (HWP) enabled" * tag 'pm-5.9-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: intel_pstate: Implement passive mode with HWP enabled
2020-08-15Merge tag 'mfd-next-5.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Frameworks - Make better attempt at matching device with the correct OF node - Allow batch removal of hierarchical sub-devices New Drivers - Add STM32 Clocksource driver - Add support for Khadas System Control Microcontroller Driver Removal - Remove unused driver for TI's SMSC ECE1099 New Device Support - Add support for Intel Emmitsburg PCH to Intel LPSS PCI - Add support for Intel Tiger Lake PCH-H to Intel LPSS PCI - Add support for Dialog DA revision to Dialog DA9063 New Functionality - Add support for AXP803 to be probed by I2C Fix-ups - Numerous W=1 warning fixes - Device Tree changes (stm32-lptimer, gateworks-gsc, khadas,mcu, stmfx, cros-ec, j721e-system-controller) - Enabled Regmap 'fast I/O' in stm32-lptimer - Change BUG_ON to WARN_ON in arizona-core - Remove superfluous code/initialisation (madera, max14577) - Trivial formatting/spelling issues (madera-core, madera-i2c, da9055, max77693-private) - Switch to of_platform_populate() in sprd-sc27xx-spi - Expand out set/get brightness/pwm macros in lm3533-ctrlbank - Disable IRQs on suspend in motorola-cpcap - Clean-up error handling in intel_soc_pmic_mrfld - Ensure correct removal order of sub-devices in madera - Many s/HTTP/HTTPS/ link changes - Ensure name used with Regmap is unique in syscon Bug Fixes - Properly 'put' clock on unbind and error in arizona-core - Fix revision handling in da9063 - Fix 'assignment of read-only location' error in kempld-core - Avoid using the Regmap API when atomic in rn5t618 - Redefine volatile register description in rn5t618 - Use locking to protect event handler in dln2" * tag 'mfd-next-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (76 commits) mfd: syscon: Use a unique name with regmap_config mfd: Replace HTTP links with HTTPS ones mfd: dln2: Run event handler loop under spinlock mfd: madera: Improve handling of regulator unbinding mfd: mfd-core: Add mechanism for removal of a subset of children mfd: intel_soc_pmic_mrfld: Simplify the return expression of intel_scu_ipc_dev_iowrite8() mfd: max14577: Remove redundant initialization of variable current_bits mfd: rn5t618: Fix caching of battery related registers mfd: max77693-private: Drop a duplicated word mfd: da9055: pdata.h: Drop a duplicated word mfd: rn5t618: Make restart handler atomic safe mfd: kempld-core: Fix 'assignment of read-only location' error mfd: axp20x: Allow the AXP803 to be probed by I2C mfd: da9063: Add support for latest DA silicon revision mfd: da9063: Fix revision handling to correctly select reg tables dt-bindings: mfd: st,stmfx: Remove I2C unit name dt-bindings: mfd: ti,j721e-system-controller.yaml: Add J721e system controller mfd: motorola-cpcap: Disable interrupt for suspend mfd: smsc-ece1099: Remove driver mfd: core: Add OF_MFD_CELL_REG() helper ...
2020-08-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: "Subsystems affected by this patch series: mm/hotfixes, lz4, exec, mailmap, mm/thp, autofs, sysctl, mm/kmemleak, mm/misc and lib" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (35 commits) virtio: pci: constify ioreadX() iomem argument (as in generic implementation) ntb: intel: constify ioreadX() iomem argument (as in generic implementation) rtl818x: constify ioreadX() iomem argument (as in generic implementation) iomap: constify ioreadX() iomem argument (as in generic implementation) sh: use generic strncpy() sh: clkfwk: remove r8/r16/r32 include/asm-generic/vmlinux.lds.h: align ro_after_init mm: annotate a data race in page_zonenum() mm/swap.c: annotate data races for lru_rotate_pvecs mm/rmap: annotate a data race at tlb_flush_batched mm/mempool: fix a data race in mempool_free() mm/list_lru: fix a data race in list_lru_count_one mm/memcontrol: fix a data race in scan count mm/page_counter: fix various data races at memsw mm/swapfile: fix and annotate various data races mm/filemap.c: fix a data race in filemap_fault() mm/swap_state: mark various intentional data races mm/page_io: mark various intentional data races mm/frontswap: mark various intentional data races mm/kmemleak: silence KCSAN splats in checksum ...
2020-08-14net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'Lee Jones
This variable is present in many source files and has not been used anywhere (at least internally) since it was introduced. Fixes the following W=1 kernel build warning(s): drivers/net/fddi/skfp/cfm.c: In function ‘cfm’: drivers/net/fddi/skfp/cfm.c:211:6: warning: variable ‘oldstate’ set but not used [-Wunused-but-set-variable] drivers/net/fddi/skfp/cfm.c:40:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'Lee Jones
While we're at it, remove some code which has never been invoked. Keep the comment though, as it seems potentially half useful. Fixes the following W=1 kernel build warning(s): drivers/net/fddi/skfp/cfm.c: In function ‘cfm’: drivers/net/fddi/skfp/cfm.c:211:6: warning: variable ‘oldstate’ set but not used [-Wunused-but-set-variable] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'Lee Jones
This variable is present in many source files and has not been used anywhere (at least internally) since it was introduced. Fixes the following W=1 kernel build warning(s): drivers/net/fddi/skfp/smt.c:24:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: fddi: skfp: smt: Place definition of 'smt_pdef' under same stipulations ↵Lee Jones
as its use The variable 'smt_pdef' is only used if LITTLE_ENDIAN is set, so only define it if this is the case. Fixes the following W=1 kernel build warning(s): drivers/net/fddi/skfp/smt.c:1572:3: warning: ‘smt_pdef’ defined but not used [-Wunused-const-variable=] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: fddi: skfp: fplustm: Remove seemingly unused variable 'ID_sccs'Lee Jones
This variable is present in many source files and has not been used anywhere (at least internally) since it was introduced. Fixes the following W=1 kernel build warning(s): drivers/net/fddi/skfp/fplustm.c:25:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: netdev@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: fddi: skfp: hwmtm: Remove seemingly unused variable 'ID_sccs'Lee Jones
This variable is present in many source files and has not been used anywhere (at least internally) since it was introduced. Fixes the following W=1 kernel build warning(s): drivers/net/fddi/skfp/hwmtm.c:14:19: warning: ‘ID_sccs’ defined but not used [-Wunused-const-variable=] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: wan: dlci: Remove set but not used variable 'err'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wan/dlci.c: In function ‘dlci_close’: drivers/net/wan/dlci.c:298:8: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Mike McLagan <mike.mclagan@linux.org> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: ethernet: 8390: axnet_cs: Document unused parameter 'txqueue'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/8390/axnet_cs.c:907: warning: Function parameter or member 'txqueue' not described in 'axnet_tx_timeout' Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Martin Habets <mhabets@solarflare.com> Cc: Shannon Nelson <snelson@pensando.io> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: William Lee <william@asix.com.tw> Cc: "A. Hinds --" <dahinds@users.sourceforge.net> Cc: reached at <becker@scyld.com> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: bonding: bond_alb: Describe alb_handle_addr_collision_on_attach()'s ↵Lee Jones
'bond' and 'addr' params Fixes the following W=1 kernel build warning(s): drivers/net/bonding/bond_alb.c:1222: warning: Function parameter or member 'bond' not described in 'alb_set_mac_address' Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: ethernet: 3com: 3c574_cs: Remove set but unused variables 'tx' and 'rx'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/ethernet/3com/3c574_cs.c: In function ‘update_stats’: drivers/net/ethernet/3com/3c574_cs.c:954:9: warning: variable ‘tx’ set but not used [-Wunused-but-set-variable] 954 | u8 rx, tx, up; | ^~ drivers/net/ethernet/3com/3c574_cs.c:954:5: warning: variable ‘rx’ set but not used [-Wunused-but-set-variable] 954 | u8 rx, tx, up; | ^~ Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Shannon Nelson <snelson@pensando.io> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Martin Habets <mhabets@solarflare.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Donald Becker <becker@scyld.com> Cc: David Hinds <dahinds@users.sourceforge.net> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: bonding: bond_main: Document 'proto' and rename 'new_active' parametersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/bonding/bond_main.c:329: warning: Function parameter or member 'proto' not described in 'bond_vlan_rx_add_vid' drivers/net/bonding/bond_main.c:362: warning: Function parameter or member 'proto' not described in 'bond_vlan_rx_kill_vid' drivers/net/bonding/bond_main.c:964: warning: Function parameter or member 'new_active' not described in 'bond_change_active_slave' drivers/net/bonding/bond_main.c:964: warning: Excess function parameter 'new' description in 'bond_change_active_slave' Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Thomas Davis <tadavis@lbl.gov> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14net: bonding: bond_3ad: Fix a bunch of kerneldoc parameter issuesLee Jones
Renames and missing descriptions. Fixes the following W=1 kernel build warning(s): drivers/net/bonding/bond_3ad.c:140: warning: Function parameter or member 'port' not described in '__get_first_agg' drivers/net/bonding/bond_3ad.c:140: warning: Excess function parameter 'bond' description in '__get_first_agg' drivers/net/bonding/bond_3ad.c:1655: warning: Function parameter or member 'agg' not described in 'ad_agg_selection_logic' drivers/net/bonding/bond_3ad.c:1655: warning: Excess function parameter 'aggregator' description in 'ad_agg_selection_logic' drivers/net/bonding/bond_3ad.c:1817: warning: Function parameter or member 'port' not described in 'ad_initialize_port' drivers/net/bonding/bond_3ad.c:1817: warning: Excess function parameter 'aggregator' description in 'ad_initialize_port' drivers/net/bonding/bond_3ad.c:1976: warning: Function parameter or member 'timeout' not described in 'bond_3ad_initiate_agg_selection' drivers/net/bonding/bond_3ad.c:2274: warning: Function parameter or member 'work' not described in 'bond_3ad_state_machine_handler' drivers/net/bonding/bond_3ad.c:2274: warning: Excess function parameter 'bond' description in 'bond_3ad_state_machine_handler' drivers/net/bonding/bond_3ad.c:2508: warning: Function parameter or member 'link' not described in 'bond_3ad_handle_link_change' drivers/net/bonding/bond_3ad.c:2508: warning: Excess function parameter 'status' description in 'bond_3ad_handle_link_change' drivers/net/bonding/bond_3ad.c:2566: warning: Function parameter or member 'bond' not described in 'bond_3ad_set_carrier' drivers/net/bonding/bond_3ad.c:2677: warning: Function parameter or member 'bond' not described in 'bond_3ad_update_lacp_rate' drivers/net/bonding/bond_3ad.c:1655: warning: Function parameter or member 'agg' not described in 'ad_agg_selection_logic' drivers/net/bonding/bond_3ad.c:1655: warning: Excess function parameter 'aggregator' description in 'ad_agg_selection_logic' drivers/net/bonding/bond_3ad.c:1817: warning: Function parameter or member 'port' not described in 'ad_initialize_port' drivers/net/bonding/bond_3ad.c:1817: warning: Excess function parameter 'aggregator' description in 'ad_initialize_port' drivers/net/bonding/bond_3ad.c:1976: warning: Function parameter or member 'timeout' not described in 'bond_3ad_initiate_agg_selection' drivers/net/bonding/bond_3ad.c:2274: warning: Function parameter or member 'work' not described in 'bond_3ad_state_machine_handler' drivers/net/bonding/bond_3ad.c:2274: warning: Excess function parameter 'bond' description in 'bond_3ad_state_machine_handler' drivers/net/bonding/bond_3ad.c:2508: warning: Function parameter or member 'link' not described in 'bond_3ad_handle_link_change' drivers/net/bonding/bond_3ad.c:2508: warning: Excess function parameter 'status' description in 'bond_3ad_handle_link_change' drivers/net/bonding/bond_3ad.c:2566: warning: Function parameter or member 'bond' not described in 'bond_3ad_set_carrier' drivers/net/bonding/bond_3ad.c:2677: warning: Function parameter or member 'bond' not described in 'bond_3ad_update_lacp_rate' Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14drivers/net/wan/hdlc_x25: Added needed_headroom and a skb->len checkXie He
1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Added needed_headroom and set hard_header_len to 0 When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes. So the value of needed_headroom in this driver should be 3 - 1. Because this driver has no header_ops, according to the logic of af_packet.c, the value of hard_header_len should be 0. Reason of setting needed_headroom and hard_header_len at this place: This driver is written using the API of the hdlc module, the hdlc module enables this driver (the protocol driver) to run on any hardware that has a driver (the hardware driver) written using the API of the hdlc module. Two other hdlc protocol drivers - hdlc_ppp and hdlc_raw_eth, also set things like hard_header_len at this place. In hdlc_ppp, it sets hard_header_len after attach_hdlc_protocol and before setting dev->type. In hdlc_raw_eth, it sets hard_header_len by calling ether_setup after attach_hdlc_protocol and after memcpy the settings. 3. Reset needed_headroom when detaching protocols (in hdlc.c) When detaching a protocol from a hardware device, the hdlc module will reset various parameters of the device (including hard_header_len) to the default values. We add needed_headroom here so that needed_headroom will also be reset. Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: Xie He <xie.he.0141@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14bonding: show saner speed for broadcast modeJarod Wilson
Broadcast mode bonds transmit a copy of all traffic simultaneously out of all interfaces, so the "speed" of the bond isn't really the aggregate of all interfaces, but rather, the speed of the slowest active interface. Also, the type of the speed field is u32, not unsigned long, so adjust that accordingly, as required to make min() function here without complaining about mismatching types. Fixes: bb5b052f751b ("bond: add support to read speed and duplex via ethtool") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14virtio: pci: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-5-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14ntb: intel: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Dave Jiang <dave.jiang@intel.com> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-4-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14rtl818x: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
The ioreadX() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Kalle Valo <kvalo@codeaurora.org> Cc: Allen Hubbe <allenbh@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jakub Kicinski <kuba@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Rich Felker <dalias@libc.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200709072837.5869-3-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14iomap: constify ioreadX() iomem argument (as in generic implementation)Krzysztof Kozlowski
Patch series "iomap: Constify ioreadX() iomem argument", v3. The ioread8/16/32() and others have inconsistent interface among the architectures: some taking address as const, some not. It seems there is nothing really stopping all of them to take pointer to const. This patch (of 4): The ioreadX() and ioreadX_rep() helpers have inconsistent interface. On some architectures void *__iomem address argument is a pointer to const, on some not. Implementations of ioreadX() do not modify the memory under the address so they can be converted to a "const" version for const-safety and consistency among architectures. [krzk@kernel.org: sh: clk: fix assignment from incompatible pointer type for ioreadX()] Link: http://lkml.kernel.org/r/20200723082017.24053-1-krzk@kernel.org [akpm@linux-foundation.org: fix drivers/mailbox/bcm-pdc-mailbox.c] Link: http://lkml.kernel.org/r/202007132209.Rxmv4QyS%25lkp@intel.com Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Allen Hubbe <allenbh@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Link: http://lkml.kernel.org/r/20200709072837.5869-1-krzk@kernel.org Link: http://lkml.kernel.org/r/20200709072837.5869-2-krzk@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14sh: clkfwk: remove r8/r16/r32Kuninori Morimoto
SH will get below warning ${LINUX}/drivers/sh/clk/cpg.c: In function 'r8': ${LINUX}/drivers/sh/clk/cpg.c:41:17: warning: passing argument 1 of 'ioread8' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] return ioread8(addr); ^~~~ In file included from ${LINUX}/arch/sh/include/asm/io.h:21, from ${LINUX}/include/linux/io.h:13, from ${LINUX}/drivers/sh/clk/cpg.c:14: ${LINUX}/include/asm-generic/iomap.h:29:29: note: expected 'void *' but argument is of type 'const void *' extern unsigned int ioread8(void __iomem *); ^~~~~~~~~~~~~~ We don't need "const" for r8/r16/r32. And we don't need r8/r16/r32 themselvs. This patch cleanup these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Modra <amodra@gmail.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Chen Zhou <chenzhou10@huawei.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Rich Felker <dalias@libc.org> Cc: Romain Naour <romain.naour@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> X-MARC-Message: https://marc.info/?l=linux-renesas-soc&m=157852973916903 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14mm: add thp_sizeMatthew Wilcox (Oracle)
This function returns the number of bytes in a THP. It is like page_size(), but compiles to just PAGE_SIZE if CONFIG_TRANSPARENT_HUGEPAGE is disabled. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: David Hildenbrand <david@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20200629151959.15779-5-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-14input: i8042 - Remove special Cayman handlingGeert Uytterhoeven
As of commit 37744feebc086908 ("sh: remove sh5 support"), support for the SH5-based Cayman platform can no longer be selected. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rich Felker <dalias@libc.org>
2020-08-14net: fec: correct the error path for regulator disable in probeFugang Duan
Correct the error path for regulator disable. Fixes: 9269e5560b26 ("net: fec: add phy-reset-gpios PROBE_DEFER check") Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14Merge branch '40GbE' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2020-08-14 This series contains updates to i40e and igc drivers. Vinicius fixes an issue with PTP spinlock being accessed before initialization. Przemyslaw fixes an issue with trusted VFs seeing additional traffic. Grzegorz adds a wait for pending resets on driver removal to prevent null pointer dereference. v2: Fix function parameter for hw/aq in patch 2. Fix fixes tag in patch 3. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull more SCSI updates from James Bottomley: "This is the set of patches which arrived too late to stabilise in -next for the first pull. It's really just an lpfc driver update and an assortment of minor fixes, all in drivers. The only core update is to the zone block device driver, which isn't the one most people use" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: lpfc: Update lpfc version to 12.8.0.3 scsi: lpfc: Fix LUN loss after cable pull scsi: lpfc: Fix validation of bsg reply lengths scsi: lpfc: Fix retry of PRLI when status indicates its unsupported scsi: lpfc: Fix oops when unloading driver while running mds diags scsi: lpfc: Fix RSCN timeout due to incorrect gidft counter scsi: lpfc: Fix no message shown for lpfc_hdw_queue out of range value scsi: lpfc: Fix FCoE speed reporting scsi: lpfc: Add missing misc_deregister() for lpfc_init() scsi: lpfc: nvmet: Avoid hang / use-after-free again when destroying targetport scsi: scsi_transport_sas: Add spaces around binary operator "|" scsi: sd_zbc: Improve zone revalidation scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del() scsi: target: Make iscsit_register_transport() return void
2020-08-14Merge tag 'pwm/for-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The majority of this batch is conversion of the PWM period and duty cycle to 64-bit unsigned integers, which is required so that some types of hardware can generate the full range of signals that they're capable of. The remainder is mostly minor fixes and cleanups" * tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: bcm-iproc: handle clk_get_rate() return pwm: Replace HTTP links with HTTPS ones pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header pwm: mediatek: Provide missing kerneldoc description for 'soc' arg pwm: bcm-kona: Remove impossible comparison when validating duty cycle pwm: bcm-iproc: Remove impossible comparison when validating duty cycle pwm: iqs620a: Use lowercase hexadecimal literals for consistency pwm: Convert period and duty cycle to u64 clk: pwm: Use 64-bit division function backlight: pwm_bl: Use 64-bit division function pwm: sun4i: Use nsecs_to_jiffies to avoid a division pwm: sifive: Use 64-bit division macro pwm: iqs620a: Use 64-bit division pwm: imx27: Use 64-bit division macro pwm: imx-tpm: Use 64-bit division macro pwm: clps711x: Use 64-bit division macro hwmon: pwm-fan: Use 64-bit division macro drm/i915: Use 64-bit division macro
2020-08-14i40e: Fix crash during removing i40e driverGrzegorz Szczurek
Fix the reason of crashing system by add waiting time to finish reset recovery process before starting remove driver procedure. Now VSI is releasing if VSI is not in reset recovery mode. Without this fix it was possible to start remove driver if other processing command need reset recovery procedure which resulted in null pointer dereference. VSI used by the ethtool process has been cleared by remove driver process. [ 6731.508665] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 6731.508668] #PF: supervisor read access in kernel mode [ 6731.508670] #PF: error_code(0x0000) - not-present page [ 6731.508671] PGD 0 P4D 0 [ 6731.508674] Oops: 0000 [#1] SMP PTI [ 6731.508679] Hardware name: Intel Corporation S2600WT2R/S2600WT2R, BIOS SE5C610.86B.01.01.0021.032120170601 03/21/2017 [ 6731.508694] RIP: 0010:i40e_down+0x252/0x310 [i40e] [ 6731.508696] Code: c7 78 de fa c0 e8 61 02 3a c1 66 83 bb f6 0c 00 00 00 0f 84 bf 00 00 00 45 31 e4 45 31 ff eb 03 41 89 c7 48 8b 83 98 0c 00 00 <4a> 8b 3c 20 e8 a5 79 02 00 48 83 bb d0 0c 00 00 00 74 10 48 8b 83 [ 6731.508698] RSP: 0018:ffffb75ac7b3faf0 EFLAGS: 00010246 [ 6731.508700] RAX: 0000000000000000 RBX: ffff9c9874bd5000 RCX: 0000000000000007 [ 6731.508701] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffff9c987f4d9780 [ 6731.508703] RBP: ffffb75ac7b3fb30 R08: 0000000000005b60 R09: 0000000000000004 [ 6731.508704] R10: ffffb75ac64fbd90 R11: 0000000000000001 R12: 0000000000000000 [ 6731.508706] R13: ffff9c97a08e0000 R14: ffff9c97a08e0a68 R15: 0000000000000000 [ 6731.508708] FS: 00007f2617cd2740(0000) GS:ffff9c987f4c0000(0000) knlGS:0000000000000000 [ 6731.508710] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 6731.508711] CR2: 0000000000000000 CR3: 0000001e765c4006 CR4: 00000000003606e0 [ 6731.508713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 6731.508714] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 6731.508715] Call Trace: [ 6731.508734] i40e_vsi_close+0x84/0x90 [i40e] [ 6731.508742] i40e_quiesce_vsi.part.98+0x3c/0x40 [i40e] [ 6731.508749] i40e_pf_quiesce_all_vsi+0x55/0x60 [i40e] [ 6731.508757] i40e_prep_for_reset+0x59/0x130 [i40e] [ 6731.508765] i40e_reconfig_rss_queues+0x5a/0x120 [i40e] [ 6731.508774] i40e_set_channels+0xda/0x170 [i40e] [ 6731.508778] ethtool_set_channels+0xe9/0x150 [ 6731.508781] dev_ethtool+0x1b94/0x2920 [ 6731.508805] dev_ioctl+0xc2/0x590 [ 6731.508811] sock_do_ioctl+0xae/0x150 [ 6731.508813] sock_ioctl+0x34f/0x3c0 [ 6731.508821] ksys_ioctl+0x98/0xb0 [ 6731.508828] __x64_sys_ioctl+0x1a/0x20 [ 6731.508831] do_syscall_64+0x57/0x1c0 [ 6731.508835] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 4b8164467b85 ("i40e: Add common function for finding VSI by type") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-08-14i40e: Set RX_ONLY mode for unicast promiscuous on VLANPrzemyslaw Patynowski
Trusted VF with unicast promiscuous mode set, could listen to TX traffic of other VFs. Set unicast promiscuous mode to RX traffic, if VSI has port VLAN configured. Rename misleading I40E_AQC_SET_VSI_PROMISC_TX bit to I40E_AQC_SET_VSI_PROMISC_RX_ONLY. Aligned unicast promiscuous with VLAN to the one without VLAN. Fixes: 6c41a7606967 ("i40e: Add promiscuous on VLAN support") Fixes: 3b1200891b7f ("i40e: When in promisc mode apply promisc mode to Tx Traffic as well") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-08-14sfc: check hash is valid before using itEdward Cree
On EF100, the RX hash field in the packet prefix may not be valid (e.g. if the header parse failed), and this is indicated by a one-bit flag elsewhere in the packet prefix. Only call skb_set_hash() if the RSS_HASH_VALID bit is set. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>