Age | Commit message (Collapse) | Author |
|
Leon Romanovsky says:
====================
This series from Alex extends software steering interface to support
devices with extra capability "sw_owner_2" which will replace existing
"sw_owner".
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_sw_owner_v2:
RDMA/mlx5: Expose TIR and QP ICM address for sw_owner_v2 devices
RDMA/mlx5: Allow DM allocation for sw_owner_v2 enabled devices
RDMA/mlx5: Add sw_owner_v2 bit capability
|
|
Leon Romanovsky says:
====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions
|
|
According to the IB spec active_speed size should be u16 and not u8 as
before. Changing it to allow further extensions in offered speeds.
Link: https://lore.kernel.org/r/20200917090223.1018224-4-leon@kernel.org
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Expose the ICM address to access TIR and QP, this will allow sw_owned_v2
devices to steer traffic to TIRs and QPs same as done with sw_owner
capability.
Link: https://lore.kernel.org/r/20200903073857.1129166-4-leon@kernel.org
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
sw_owner_v2 will replace sw_owner for future devices, this means that if
sw_owner_v2 is set sw_owner should be ignored and DM allocation is
required for sw_owner_v2 devices to function.
Link: https://lore.kernel.org/r/20200903073857.1129166-3-leon@kernel.org
Signed-off-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move struct ib_rwq_ind_table allocation to ib_core.
Link: https://lore.kernel.org/r/20200902081623.746359-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Move allocation and destruction of memory windows under ib_core
responsibility and clean drivers to ensure that no updates to MW
ib_core structures are done in driver layer.
Link: https://lore.kernel.org/r/20200902081623.746359-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Combine two same enums to avoid duplication.
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The functions mlx5_query_port_link_width_oper and
mlx5_query_port_ib_proto_oper are always called together, so combine them
to a new function called mlx5_query_port_oper to avoid duplication.
And while the mlx5i_get_port_settings is the same as
mlx5_query_port_oper therefore let's remove it.
According to the IB spec link_width_oper and ib_proto_oper should be u16
and not as written u8, so perform casting as a preparation to cross-RDMA
patch which will fix that type for all drivers in the RDMA subsystem.
Fixes: ada68c31ba9c ("net/mlx5: Introduce a new header file for physical port functions")
Signed-off-by: Aharon Landau <aharonl@mellanox.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
The roce path triggers a work queue that continues to touch the id_priv
but doesn't hold any reference on it. Futher, unlike in the IB case, the
work queue is not fenced during rdma_destroy_id().
This can trigger a use after free if a destroy is triggered in the
incredibly narrow window after the queue_work and the work starting and
obtaining the handler_mutex.
The only purpose of this work queue is to run the ULP event callback from
the standard context, so switch the design to use the existing
cma_work_handler() scheme. This simplifies quite a lot of the flow:
- Use the cma_work_handler() callback to launch the work for roce. This
requires generating the event synchronously inside the
rdma_join_multicast(), which in turn means the dummy struct
ib_sa_multicast can become a simple stack variable.
- cm_work_handler() used the id_priv kref, so we can entirely eliminate
the kref inside struct cma_multicast. Since the cma_multicast never
leaks into an unprotected work queue the kfree can be done at the same
time as for IB.
- Eliminating the general multicast.ib requires using cma_set_mgid() in a
few places to recompute the mgid.
Fixes: 3c86aa70bf67 ("RDMA/cm: Add RDMA CM support for IBoE devices")
Link: https://lore.kernel.org/r/20200902081122.745412-9-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Two places were open coding this sequence, and also pull in
cma_leave_roce_mc_group() which was called only once.
Link: https://lore.kernel.org/r/20200902081122.745412-8-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is no kernel user of RDMA CM multicast so this code managing the
multicast subscription of the kernel-only internal QP is dead. Remove it.
This makes the bug fixes in the next patches much simpler.
Link: https://lore.kernel.org/r/20200902081122.745412-7-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
These are the same thing, except that cma_ndev_work doesn't have a state
transition. Signal no state transition by setting old_state and new_state
== 0.
In all cases the handler function should not be called once
rdma_destroy_id() has progressed passed setting the state.
Link: https://lore.kernel.org/r/20200902081122.745412-6-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The only place that still uses it is rdma_join_multicast() which is only
doing a sanity check that the caller hasn't done something wrong and
doesn't need the spinlock.
At least in the case of rdma_join_multicast() the information it needs
will remain until the ID is destroyed once it enters these
states. Similarly there is no reason to check for these specific states in
the handler callback, instead use the usual check for a destroyed id under
the handler_mutex.
Link: https://lore.kernel.org/r/20200902081122.745412-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
There is a strange unlocked read of the ID state when checking for
reuseaddr. This is because an ID cannot be reusable once it becomes a
listening ID. Instead of using the state to exclude reuse, just clear it
as part of rdma_listen()'s flow to convert reusable into not reusable.
Once a ID goes to listen there is no way back out, and the only use of
reusable is on the bind_list check.
Finally, update the checks under handler_mutex to use READ_ONCE and audit
that once RDMA_CM_LISTEN is observed in a req callback it is stable under
the handler_mutex.
Link: https://lore.kernel.org/r/20200902081122.745412-4-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Re-organize things so the state variable is not read unlocked. The first
attempt to go directly from ADDR_BOUND immediately tells us if the ID is
already bound, if we can't do that then the attempt inside
rdma_bind_addr() to go from IDLE to ADDR_BOUND confirms the ID needs
binding.
Link: https://lore.kernel.org/r/20200902081122.745412-3-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
It is currently a bit confusing, but the design is if the handler_mutex
is held, and the state is in RDMA_CM_CONNECT, then the state cannot leave
RDMA_CM_CONNECT without also serializing with the handler_mutex.
Make this clearer by adding a direct assertion, fixing the usage in
rdma_connect and generally using READ_ONCE to read the state value.
Link: https://lore.kernel.org/r/20200902081122.745412-2-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code.
Link: https://lore.kernel.org/r/20200916025022.3992627-1-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
hw_context stores a pci_device pointer. Use the correct type instead of
void * and avoid typecasts.
Link: https://lore.kernel.org/r/20200914123528.270382-1-parav@mellanox.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Implement the XRC specific verbs. The additional QP type introduced new
logic to the rest of the verbs that now require distinguishing whether a
QP has an "RQ" or an "SQ" or both.
Link: https://lore.kernel.org/r/20200722102339.30104-1-ybason@marvell.com
Signed-off-by: Michal Kalderon <mkalderon@marvell.com>
Signed-off-by: Yuval Basson <ybason@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 5.9-rc5.
Nothing huge, just a number of bugfixes and new device ids for
problems reported:
- new USB serial driver ids
- bug fixes for syzbot reported problems
- typec driver fixes
- thunderbolt driver fixes
- revert of reported broken commit
All of these have been in linux-next with no reported issues"
* tag 'usb-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: intel_pmc_mux: Do not configure SBU and HSL Orientation in Alternate modes
usb: typec: intel_pmc_mux: Do not configure Altmode HPD High
usb: core: fix slab-out-of-bounds Read in read_descriptors
Revert "usb: dwc3: meson-g12a: fix shared reset control use"
usb: typec: ucsi: acpi: Check the _DEP dependencies
usb: typec: intel_pmc_mux: Un-register the USB role switch
usb: Fix out of sync data toggle if a configured device is reconfigured
USB: serial: option: support dynamic Quectel USB compositions
USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modules
thunderbolt: Use maximum USB3 link rate when reclaiming if link is not up
thunderbolt: Disable ports that are not implemented
USB: serial: ftdi_sio: add IDs for Xsens Mti USB converter
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of staging and IIO driver fixes for 5.9-rc5.
The majority of these are IIO driver fixes, to resolve a timestamp
issue that was recently found to affect a bunch of IIO drivers.
The other fixes in here are:
- small IIO driver fixes
- greybus driver fix
- counter driver fix (came in through the IIO fixes tree)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (23 commits)
iio: adc: mcp3422: fix locking on error path
iio: adc: mcp3422: fix locking scope
iio: adc: meson-saradc: Use the parent device to look up the calib data
iio:adc:max1118 Fix alignment of timestamp and data leak issues
iio:adc:ina2xx Fix timestamp alignment issue.
iio:adc:ti-adc084s021 Fix alignment and data leak issues.
iio:adc:ti-adc081c Fix alignment and data leak issues
iio:magnetometer:ak8975 Fix alignment and data leak issues.
iio:light:ltr501 Fix timestamp alignment issue.
iio:light:max44000 Fix timestamp alignment and prevent data leak.
iio:chemical:ccs811: Fix timestamp alignment and prevent data leak.
iio:proximity:mb1232: Fix timestamp alignment and prevent data leak.
iio:accel:mma7455: Fix timestamp alignment and prevent data leak.
iio:accel:bmc150-accel: Fix timestamp alignment and prevent data leak.
iio:accel:mma8452: Fix timestamp alignment and prevent data leak.
iio: accel: kxsd9: Fix alignment of local buffer.
iio: adc: rockchip_saradc: select IIO_TRIGGERED_BUFFER
iio: adc: ti-ads1015: fix conversion when CONFIG_PM is not set
counter: microchip-tcb-capture: check the correct variable
iio: cros_ec: Set Gyroscope default frequency to 25Hz
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core and debugfs fixes for 5.9-rc5
Included in here are:
- firmware loader memory leak fix
- firmware loader testing fixes for non-EFI systems
- device link locking fixes found by lockdep
- kobject_del() bugfix that has been affecting some callers
- debugfs minor fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
test_firmware: Test platform fw loading on non-EFI systems
PM: <linux/device.h>: fix @em_pd kernel-doc warning
kobject: Drop unneeded conditional in __kobject_del()
driver core: Fix device_pm_lock() locking for device links
MAINTAINERS: Add the security document to SECURITY CONTACT
driver code: print symbolic error code
debugfs: Fix module state check condition
kobject: Restore old behaviour of kobject_del(NULL)
firmware_loader: fix memory leak for paged buffer
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.9-rc5
Included in here are:
- habanalabs driver fixes
- interconnect driver fixes
- soundwire driver fixes
- dyndbg fixes for reported issues, and then reverts to fix it all up
to a sane state.
- phy driver fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
Revert "dyndbg: accept query terms like file=bar and module=foo"
Revert "dyndbg: fix problem parsing format="foo bar""
scripts/tags.sh: exclude tools directory from tags generation
video: fbdev: fix OOB read in vga_8planes_imageblit()
dyndbg: fix problem parsing format="foo bar"
dyndbg: refine export, rename to dynamic_debug_exec_queries()
dyndbg: give %3u width in pr-format, cosmetic only
interconnect: qcom: Fix small BW votes being truncated to zero
soundwire: fix double free of dangling pointer
interconnect: Show bandwidth for disabled paths as zero in debugfs
habanalabs: fix report of RAZWI initiator coordinates
habanalabs: prevent user buff overflow
phy: omap-usb2-phy: disable PHY charger detect
phy: qcom-qmp: Use correct values for ipq8074 PCIe Gen2 PHY init
soundwire: bus: fix typo in comment on INTSTAT registers
phy: qualcomm: fix return value check in qcom_ipq806x_usb_phy_probe()
phy: qualcomm: fix platform_no_drv_owner.cocci warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Vishal Verma:
"Fix detection of dax support for block devices.
Previous fixes in this area, which only affected printing of debug
messages, had an incorrect condition for detection of dax. This fix
should finally do the right thing"
* tag 'libnvdimm-fix-v5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: fix detection of dax support for non-persistent memory block devices
|
|
Pull ceph fix from Ilya Dryomov:
"Add missing capability checks in rbd, marked for stable"
* tag 'ceph-for-5.9-rc5' of git://github.com/ceph/ceph-client:
rbd: require global CAP_SYS_ADMIN for mapping and unmapping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Usual driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: algo: pca: Reapply i2c bus settings after reset
i2c: npcm7xx: Fix timeout calculation
misc: eeprom: at24: register nvmem only after eeprom is ready to use
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three pieces of documentation and add new CPU IDs to the
Intel RAPL power capping driver.
Specifics:
- Add CPU IDs of the TigerLake Desktop, RocketLake and AlderLake
chips to the Intel RAPL power capping driver (Zhang Rui).
- Add the missing energy model performance domain item to the struct
device kerneldoc comment (Randy Dunlap).
- Fix the struct powercap_control_type kerneldoc comment to match the
actual definition of that structure and add missing item to the
struct powercap_zone_ops kerneldoc comment (Amit Kucheria)"
* tag 'pm-5.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap: make documentation reflect code
PM: <linux/device.h>: fix @em_pd kernel-doc warning
powercap/intel_rapl: add support for AlderLake
powercap/intel_rapl: add support for RocketLake
powercap/intel_rapl: add support for TigerLake Desktop
|
|
Pull block fixes from Jens Axboe:
- Fix a regression in bdev partition locking (Christoph)
- NVMe pull request from Christoph:
- cancel async events before freeing them (David Milburn)
- revert a broken race fix (James Smart)
- fix command processing during resets (Sagi Grimberg)
- Fix a kyber crash with requeued flushes (Omar)
- Fix __bio_try_merge_page() same_page error for no merging (Ritesh)
* tag 'block-5.9-2020-09-11' of git://git.kernel.dk/linux-block:
block: Set same_page to false in __bio_try_merge_page if ret is false
nvme-fabrics: allow to queue requests for live queues
block: only call sched requeue_request() for scheduled requests
nvme-tcp: cancel async events before freeing event struct
nvme-rdma: cancel async events before freeing event struct
nvme-fc: cancel async events before freeing event struct
nvme: Revert: Fix controller creation races with teardown flow
block: restore a specific error code in bdev_del_partition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There's some driver specific fixes here plus one core fix for memory
leaks that could be triggered by a potential race condition when
cleaning up after we have split transfers to fit into what the
controller can support"
* tag 'spi-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: fix pm_runtime_get_sync() error checking
spi: Fix memory leak on splited transfers
spi: spi-cadence-quadspi: Fix mapping of buffers for DMA reads
spi: stm32: Rate-limit the 'Communication suspended' message
spi: spi-loopback-test: Fix out-of-bounds read
spi: spi-cadence-quadspi: Populate get_name() interface
MAINTAINERS: add myself as maintainer for spi-fsl-dspi driver
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The biggest set of fixes here is those from Michał Mirosław fixing
some locking issues with coupled regulators that are triggered in
cases where a coupled regulator is used by a device involved in
fs_reclaim like eMMC storage.
These are relatively serious for the affected systems, though the
circumstances where they trigger are very rare"
* tag 'regulator-fix-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pwm: Fix machine constraints application
regulator: core: Fix slab-out-of-bounds in regulator_unlock_recursive()
regulator: remove superfluous lock in regulator_resolve_coupling()
regulator: cleanup regulator_ena_gpio_free()
regulator: plug of_node leak in regulator_register()'s error path
regulator: push allocation in set_consumer_device_supply() out of lock
regulator: push allocations in create_regulator() outside of lock
regulator: push allocation in regulator_ena_gpio_request() out of lock
regulator: push allocation in regulator_init_coupling() outside of lock
regulator: fix spelling mistake "Cant" -> "Can't"
regulator: cros-ec-regulator: Add NULL test for devm_kmemdup call
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- sdio: Restore ~20% performance drop for SDHCI drivers, by using
mmc_pre_req() and mmc_post_req() for SDIO requests.
MMC host:
- sdhci-of-esdhc: Fix support for erratum eSDHC7
- mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
- sdhci-msm: Use retries to fix tuning
- sdhci-acpi: Fix resume for eMMC HS400 mode"
* tag 'mmc-v5.9-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdio: Use mmc_pre_req() / mmc_post_req()
mmc: sdhci-of-esdhc: Don't walk device-tree on every interrupt
mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset
mmc: sdhci-msm: Add retries when all tuning phases are found valid
mmc: sdhci-acpi: Clear amd_sdhci_host on reset
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes, not much a major amount. One thing though is Laurent
fixed some Kconfig issues, and I'm carrying the rapidio kconfig change
so the drm one for xlnx driver works. He hadn't got a response from
rapidio maintainers.
Otherwise, virtio, sun4i, tve200, ingenic have some fixes, one audio
fix for i915 and a core docs fix.
kconfig:
- rapidio/xlnx kconfig fix
core:
- Documentation fix
i915:
- audio regression fix
virtio:
- Fix double free in virtio
- Fix virtio unblank
- Remove output->enabled from virtio, as it should use crtc_state
sun4i:
- Add missing put_device in sun4i, and other fixes
- Handle sun4i alpha on lowest plane correctly
tv200:
- Fix tve200 enable/disable
ingenic
- Small ingenic fixes"
* tag 'drm-fixes-2020-09-11' of git://anongit.freedesktop.org/drm/drm:
drm/i915: fix regression leading to display audio probe failure on GLK
drm: xlnx: dpsub: Fix DMADEVICES Kconfig dependency
rapidio: Replace 'select' DMAENGINES 'with depends on'
drm/virtio: drop virtio_gpu_output->enabled
drm/sun4i: backend: Disable alpha on the lowest plane on the A20
drm/sun4i: backend: Support alpha property on lowest plane
drm/sun4i: Fix DE2 YVU handling
drm/tve200: Stabilize enable/disable
dma-buf: fence-chain: Document missing dma_fence_chain_init() parameter in kerneldoc
dma-buf: Fix kerneldoc of dma_buf_set_name()
drm/virtio: fix unblank
Documentation: fix dma-buf.rst underline length warning
drm/sun4i: Fix dsi dcs long write function
drm/ingenic: Fix driver not probing when IPU port is missing
drm/ingenic: Fix leak of device_node pointer
drm/sun4i: add missing put_device() call in sun8i_r40_tcon_tv_set_mux()
drm/virtio: Revert "drm/virtio: Call the right shmem helpers"
|
|
Pull rdma fixes from Jason Gunthorpe:
"A number of driver bug fixes and a few recent regressions:
- Several bug fixes for bnxt_re. Crashing, incorrect data reported,
and corruption on new HW
- Memory leak and crash in rxe
- Fix sysfs corruption in rxe if the netdev name is too long
- Fix a crash on error unwind in the new cq_pool code
- Fix kobject panics in rtrs by working device lifetime properly
- Fix a data corruption bug in iser target related to misaligned
buffers"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
IB/isert: Fix unaligned immediate-data handling
RDMA/rtrs-srv: Set .release function for rtrs srv device during device init
RDMA/bnxt_re: Remove set but not used variable 'qplib_ctx'
RDMA/core: Fix reported speed and width
RDMA/core: Fix unsafe linked list traversal after failing to allocate CQ
RDMA/bnxt_re: Remove the qp from list only if the qp destroy succeeds
RDMA/bnxt_re: Fix driver crash on unaligned PSN entry address
RDMA/bnxt_re: Restrict the max_gids to 256
RDMA/bnxt_re: Static NQ depth allocation
RDMA/bnxt_re: Fix the qp table indexing
RDMA/bnxt_re: Do not report transparent vlan from QP1
RDMA/mlx4: Read pkey table length instead of hardcoded value
RDMA/rxe: Fix panic when calling kmem_cache_create()
RDMA/rxe: Fix memleak in rxe_mem_init_user
RDMA/rxe: Fix the parent sysfs read when the interface has 15 chars
RDMA/rtrs-srv: Replace device_register with device_initialize and device_add
|
|
Alignment of parameters was off by one
Link: https://lore.kernel.org/r/20200902165741.8355-9-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
commit 59e8970b3798 ("RDMA/qedr: Return max inline data in QP query
result") changed query_qp max_inline size to return the max roce inline
size. When iwarp was introduced, this should have been modified to return
the max inline size based on protocol. This size is cached in the device
attributes
Fixes: 69ad0e7fe845 ("RDMA/qedr: Add support for iWARP in user space")
Link: https://lore.kernel.org/r/20200902165741.8355-8-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Currently iWARP does not support mtu-change. Notify user when MTU changes
that reload of qedr is required for mtu to change. Display the correct
active mtu.
Fixes: f5b1b1775be6 ("RDMA/qedr: Add iWARP support in existing verbs")
Link: https://lore.kernel.org/r/20200902165741.8355-7-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
MTU change on ethtool is currently not supported for iWARP. Notify qedr
driver so that appropriate logging can take place.
Link: https://lore.kernel.org/r/20200902165741.8355-6-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
In iWARP, accept could be called after a QP is already destroyed. In this
case an error should be returned and not success.
Fixes: 82af6d19d8d9 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20200902165741.8355-5-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
dev->attr.page_size_caps was used uninitialized when setting device
attributes
Fixes: ec72fce401c6 ("qedr: Add support for RoCE HW init")
Link: https://lore.kernel.org/r/20200902165741.8355-4-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Change the doorbell setting so that the maximum value between the last and
current value is set. This is to avoid doorbells being lost.
Fixes: a7efd7773e31 ("qedr: Add support for PD,PKEY and CQ verbs")
Link: https://lore.kernel.org/r/20200902165741.8355-3-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The qedr_qp structure wasn't freed when the protocol was RoCE. kmemleak
output when running basic RoCE scenario.
unreferenced object 0xffff927ad7e22c00 (size 1024):
comm "ib_send_bw", pid 7082, jiffies 4384133693 (age 274.698s)
hex dump (first 32 bytes):
00 b0 cd a2 79 92 ff ff 00 3f a1 a2 79 92 ff ff ....y....?..y...
00 ee 5c dd 80 92 ff ff 00 f6 5c dd 80 92 ff ff ..\.......\.....
backtrace:
[<00000000b2ba0f35>] qedr_create_qp+0xb3/0x6c0 [qedr]
[<00000000e85a43dd>] ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x555/0xad0 [ib_uverbs]
[<00000000fee4d029>] ib_uverbs_cmd_verbs+0xa5a/0xb80 [ib_uverbs]
[<000000005d622660>] ib_uverbs_ioctl+0xa4/0x110 [ib_uverbs]
[<00000000eb4cdc71>] ksys_ioctl+0x87/0xc0
[<00000000abe6b23a>] __x64_sys_ioctl+0x16/0x20
[<0000000046e7cef4>] do_syscall_64+0x4d/0x90
[<00000000c6948f76>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 1212767e23bb ("qedr: Add wrapping generic structure for qpidr and adjust idr routines.")
Link: https://lore.kernel.org/r/20200902165741.8355-2-michal.kalderon@marvell.com
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This is always the same value as IOVA masked by the page size, just use
that clearer calculation directly.
It is unclear of ocrdma hardware can actually support a true fbo, if so it
could use a different algorithm to compute the best page size.
Link: https://lore.kernel.org/r/17-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
zbva is always false, so fbo is never read.
A 'zero-based-virtual-address' is simply IOVA == 0, and the driver already
supports this.
Link: https://lore.kernel.org/r/16-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
For the calls linked to mlx4_ib_umem_calc_optimal_mtt_size() use
ib_umem_num_dma_blocks() inside the function, it is just some weird static
default.
All other places are just using it with PAGE_SIZE, switch to
ib_umem_num_dma_blocks().
As this is the last call site, remove ib_umem_num_count().
Link: https://lore.kernel.org/r/15-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This driver always uses PAGE_SIZE.
Link: https://lore.kernel.org/r/14-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
This driver always uses a DMA array made up of PAGE_SIZE elements, so just
use ib_umem_num_dma_blocks().
Since rdma_for_each_dma_block() always iterates exactly
ib_umem_num_dma_blocks() there is no need for the early exit check in
build_user_pbes(), delete it.
Link: https://lore.kernel.org/r/13-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
mtr_umem_page_count() does the same thing, replace it with the core code.
Also, ib_umem_find_best_pgsz() should always be called to check that the
umem meets the page_size requirement. If there is a limited set of
page_sizes that work it the pgsz_bitmap should be set to that set. 0 is a
failure and the umem cannot be used.
Lightly tidy the control flow to implement this flow properly.
Link: https://lore.kernel.org/r/12-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
ib_umem_page_count() returns the number of 4k entries required for a DMA
map, but bnxt_re already computes a variable page size. The correct API to
determine the size of the page table array is ib_umem_num_dma_blocks().
Fix the overallocation of the page array in fill_umem_pbl_tbl() when
working with larger page sizes by using the right function. Lightly
re-organize this function to make it clearer.
Replace the other calls to ib_umem_num_pages().
Fixes: d85582517e91 ("RDMA/bnxt_re: Use core helpers to get aligned DMA address")
Link: https://lore.kernel.org/r/11-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The length of the list populated by qedr_populate_pbls() should be
calculated using ib_umem_num_dma_blocks() with the same size/shift passed
to qedr_populate_pbls().
Link: https://lore.kernel.org/r/10-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.com
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|