| Age | Commit message (Collapse) | Author |
|---|
|
For XDP TX, even tough we start out with correctly aligned buffers, the
XDP program might change the data's alignment. For REDIRECT, we have no
control over the alignment either.
Create a new workaround for xdp_frame structures to verify the erratum
conditions and move the data to a fresh buffer if necessary. Create a new
xdp_frame for managing the new buffer and free the old one using the XDP
API.
Due to alignment constraints, all frames have a 256 byte headroom that
is offered fully to XDP under the erratum. If the XDP program uses all
of it, the data needs to be move to make room for the xdpf backpointer.
Disable the metadata support since the information can be lost.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Explicitly point that the current workaround addresses skbs. This change is
in preparation for adding a workaround for XDP scenarios.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After transmission, the frame is returned on confirmation queues for
cleanup. For this, store a backpointer to the xdp_frame in the private
reserved area at the start of the TX buffer.
No TX batching support is implemented at this time.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use an xdp_frame structure for managing the frame. Store a backpointer to
the structure at the start of the buffer before enqueueing for cleanup
on TX confirmation. Reserve DPAA_TX_PRIV_DATA_SIZE bytes from the frame
size shared with the XDP program for this purpose. Use the XDP
API for freeing the buffer when it returns to the driver on the TX
confirmation path.
The frame queues are shared with the netstack. The DPAA driver is a LLTX
driver so no explicit locking is required on transmission.
This approach will be reused for XDP REDIRECT.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the ndo_change_mtu callback to prevent users from setting an
MTU that would permit processing of S/G frames. The maximum MTU size
is dependent on the buffer size.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the XDP_DROP and XDP_PASS actions.
Avoid draining and reconfiguring the buffer pool at each XDP
setup/teardown by increasing the frame headroom and reserving
XDP_PACKET_HEADROOM bytes from the start. Since we always reserve an
entire page per buffer, this change only impacts Jumbo frame scenarios
where the maximum linear frame size is reduced by 256 bytes. Multi
buffer Scatter/Gather frames are now used instead in these scenarios.
Allow XDP programs to access the entire buffer.
The data in the received frame's headroom can be overwritten by the XDP
program. Extract the relevant fields from the headroom while they are
still available, before running the XDP program.
Since the headroom might be resized before the frame is passed up to the
stack, remove the check for a fixed headroom value when building an skb.
Allow the meta data to be updated and pass the information up the stack.
Scatter/Gather frames are dropped when XDP is enabled.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We maintain an skb backpointer in the software annotations area of Tx
frames. Introduce a structure for explicit handling.
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The offsets for almost all GSI registers we use have different
offsets starting at IPA version 4.5. Only two registers remain
in their original location.
In a way though, the new register locations are not *that*
different. The entire group of affected registers has simply
been shifted down in memory by a fixed amount (0xd000). So for
example, the channel context 0 register that has a base offset of
0x0001c000 for "older" hardware now has a base offset of 0x0000f000.
This patch aims to add support for IPA v4.5 registers at their new
offets in a way that minimizes the amount of code that needs to
change. It is not ideal, but it avoids the need to maintain
a nearly complete set of additional register offset definitions.
The approach takes advantage of the fact that when accessing GSI
registers we do not access any of memory at lower end of the "gsi"
memory range (with two exceptions already noted). In particular,
we do not access anything within the bottom 0xd000 bytes of the
GSI memory range.
For IPA version 4.5, after we map the GSI memory, we adjust the
virtual memory pointer downward by the fixed amount (0xd000).
That way, register accesses using the offsets defined by the
existing GSI_REG_*() macros will resolve to the proper locations
for IPA version 4.5.
The two registers *not* affected by this offset are accessed only
in gsi_irq_setup(). There, for IPA version 4.5, we undo the general
register adjustment by adding the fixed amount back to the virtual
address to access these registers.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Very few GSI register definitions change for IPA v4.5, however
as a group their position in memory shifts a constant amount
(handled by the next commit).
Add definitions and update comments to the set of GSI registers to
support changes that come with IPA v4.5.
Update the logic in gsi_channel_program() to accommodate the new
(expanded) PREFETCH_MODE field in the CH_C_QOS register.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update the IPA code to make use of the updated IPA v4.5 register
definitions. Generally what this patch does is, if IPA v4.5
hardware is in use:
- Ensure new registers or fields in IPA v4.5 are updated where
required
- Ensure registers or fields not supported in IPA v4.5 are not
examined when read, or are set to 0 when written
It does this while preserving the existing functionality for IPA
versions lower than v4.5.
The values to program for QSB_MAX_READS and QSB_MAX_WRITES and the
source and destination resource counts are updated to be correct for
all versions through v4.5 as well.
Note that IPA_RESOURCE_GROUP_SRC_MAX and IPA_RESOURCE_GROUP_DST_MAX
already reflect that 5 is an acceptable number of resources (which
IPA v4.5 implements).
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
IPA v4.5 adds a few fields to the endpoint header and extended
header configuration registers that represent new high-order bits
for certain offsets and sizes. Add code to incorporate these upper
bits into the registers for IPA v4.5.
This includes creating ipa_header_size_encoded(), which handles
encoding the metadata offset field for use in the ENDP_INIT_HDR
register in a way appropriate for the hardware version. This and
ipa_metadata_offset_encoded() ensure the mask argument passed to
u32_encode_bits() is constant.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update "ipa_reg.h" so that register definitions support IPA hardware
version 4.5, in addition to versions 3.5.1 through v4.2. Most of
the register definitions are the same, but in some cases fields are
added, changed, or eliminated.
Updates for a few IPA v4.5 registers are more complex, and adding
those definition will be deferred to separate patches. This patch
only updates the register offset and field definitions, and adds
informational comments.
The only code change avoids accessing the backward compatibility
register for IPA version 4.5 in ipa_hardware_config(). Other IPA
v4.5-specific code changes will come later.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Starting with IPA v4.2 there is a GSI channel option to use an
"escape buffer" instead of prefetch buffers. This should be used
for all channels *except* the AP command TX channel. The logic
that implements this has it backwards; fix this bug.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After migration to the shared interrupt support, the KSZ8031 PHY with
enabled interrupt support was not able to notify about link status
change.
Fixes: 59ca4e58b917 ("net: phy: micrel: implement generic .handle_interrupt() callback")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20201127123621.31234-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The device supports an operation that allows the driver to issue one
request to update the adjacency index for all the routes in a given
virtual router (VR) from old index and size to new ones. This is useful
in case the configuration of a certain nexthop group is updated and its
adjacency index changes.
Currently, the driver does not use this operation in an efficient
manner. It iterates over all the routes using the nexthop group and
issues an update request for the VR if it is not the same as the
previous VR.
Instead, use the VR tracking added in the previous patch to update the
adjacency index once for each VR currently using the nexthop group.
Example:
8k IPv6 routes were added in an alternating manner to two VRFs. All the
routes are using the same nexthop object ('nhid 1').
Before:
# perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
16,385 devlink:devlink_hwmsg
4.255933213 seconds time elapsed
0.000000000 seconds user
0.666923000 seconds sys
Number of EMAD transactions corresponds to number of routes using the
nexthop group.
After:
# perf stat -e devlink:devlink_hwmsg --filter='incoming==0' -- ip nexthop replace id 1 via 2001:db8:1::2 dev swp3
Performance counter stats for 'ip nexthop replace id 1 via 2001:db8:1::2 dev swp3':
3 devlink:devlink_hwmsg
0.077655094 seconds time elapsed
0.000000000 seconds user
0.076698000 seconds sys
Number of EMAD transactions corresponds to number of VRFs / VRs.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For each nexthop group, track in which virtual routers (VRs) the group is
used. This is going to be used by the next patch to perform a more
efficient adjacency index update whenever the group's adjacency index
changes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In the rare case where the adjacency pointer cannot be updated for a
given virtual router, rollback the operation so that virtual routers
that are already using the new index will use the old one again.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
pointer
mlxsw_sp_adj_index_mass_update_vr() only needs the virtual router's
identifier and protocol, so pass them directly. In a subsequent patch
the caller will not have access to the pointer.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return error to the caller instead of suppressing it.
Fixes: e3ddfb45bacd ("mlxsw: spectrum_router: Allow returning errors from mlxsw_sp_nexthop_group_refresh()")
Addresses-Coverity: ("Error handling issues (CHECKED_RETURN)")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes in the UFS driver: two are for power management
issues and the third is to fix a slew of problem in the sysfs code"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: Fix race between shutdown and runtime resume flow
scsi: ufs: Make sure clk scaling happens only when HBA is runtime ACTIVE
scsi: ufs: Fix unexpected values from ufshcd_read_desc_param()
|
|
Pull rdma fixes from Jason Gunthorpe:
"Two security issues and several small bug fixes. Things seem to have
stabilized for this release here.
Summary:
- Significant out of bounds access security issue in i40iw
- Fix misuse of mmu notifiers in hfi1
- Several errors in the register map/usage in hns
- Missing error returns in mthca"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/hns: Bugfix for memory window mtpt configuration
RDMA/hns: Fix retry_cnt and rnr_cnt when querying QP
RDMA/hns: Fix wrong field of SRQ number the device supports
IB/hfi1: Ensure correct mm is used at all times
RDMA/i40iw: Address an mmap handler exploit in i40iw
IB/mthca: fix return value of error branch in mthca_init_cq()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"Because of a recent change in the core, NAND controller drivers
initializing the ECC engine too early in the probe path are broken.
Drivers should wait for the NAND device to be discovered and its
memory layout known before doing any ECC related initialization, so
instead of reverting the faulty change which is actually moving in the
right direction, let's fix the drivers directly: socrates, sharpsl,
r852, plat_nand, pasemi, tmio, txx9ndfmc, orion, mpc5121, lpc32xx_slc,
lpc32xx_mlc, fsmc, diskonchip, davinci, cs553x, au1550, ams-delta,
xway and gpio"
* tag 'mtd/fixes-for-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: socrates: Move the ECC initialization to ->attach_chip()
mtd: rawnand: sharpsl: Move the ECC initialization to ->attach_chip()
mtd: rawnand: r852: Move the ECC initialization to ->attach_chip()
mtd: rawnand: plat_nand: Move the ECC initialization to ->attach_chip()
mtd: rawnand: pasemi: Move the ECC initialization to ->attach_chip()
mtd: rawnand: tmio: Move the ECC initialization to ->attach_chip()
mtd: rawnand: txx9ndfmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: orion: Move the ECC initialization to ->attach_chip()
mtd: rawnand: mpc5121: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_slc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: lpc32xx_mlc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: fsmc: Move the ECC initialization to ->attach_chip()
mtd: rawnand: diskonchip: Move the ECC initialization to ->attach_chip()
mtd: rawnand: davinci: Move the ECC initialization to ->attach_chip()
mtd: rawnand: cs553x: Move the ECC initialization to ->attach_chip()
mtd: rawnand: au1550: Move the ECC initialization to ->attach_chip()
mtd: rawnand: ams-delta: Move the ECC initialization to ->attach_chip()
mtd: rawnand: xway: Move the ECC initialization to ->attach_chip()
mtd: rawnand: gpio: Move the ECC initialization to ->attach_chip()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few fixes for v5.10, one for the core which fixes some potential
races for controllers with multiple chip selects when configuration of
the chip select for one client device races with the addition and
initial setup of an additional client"
* tag 'spi-fix-v5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: Fix spi registration for controllers overriding CS
spi: imx: fix the unbalanced spi runtime pm management
spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts
spi: Take the SPI IO-mutex in the spi_setup() method
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull virtual digital TV driver fixes from Mauro Carvalho Chehab:
"A series of fixes for the new virtual digital TV driver (vidtv), which
is meant to help doing tests with the digital TV core and media
userspace apps and libraries.
They cover a series of issues I found on it, together with a few new
things in order to make it easier to detect problems at the DVB core"
* tag 'media/v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (36 commits)
media: vidtv.rst: add kernel-doc markups
media: vidtv.rst: update vidtv documentation
media: vidtv: simplify EIT write function
media: vidtv: simplify NIT write function
media: vidtv: simplify SDT write function
media: vidtv: cleanup PMT write table function
media: vidtv: cleanup PAT write function
media: vidtv: cleanup PSI table header function
media: vidtv: cleanup PSI descriptor write function
media: vidtv: simplify the crc writing logic
media: vidtv: simplify PSI write function
media: vidtv: add date to the current event
media: vidtv: fix service_id at SDT table
media: vidtv: fix service type
media: vidtv: add a PID entry for the NIT table
media: vidtv: properly fill EIT service_id
media: vidtv: fix the network ID range
media: vidtv: improve EIT data
media: vidtv: cleanup null packet initialization logic
media: vidtv: pre-initialize mux arrays
...
|
|
Pull drm fixes from Dave Airlie:
"Unfortunately this has a bit of thanksgiving stuffing in it, as it a
bit larger (at least the vc4 patches) than I like at this point in
time.
The main thing is it has a bunch of regressions fixes for reports in
the last couple of weeks, ast, nouveau and the amdgpu ttm init fix,
along with the usual selection of amdgpu and i915 fixes.
The vc4 fixes are a few but they are fixes and the nastiest one is a
fix for when you have a 2.4Ghz Wifi and a HDMI signal with a clock in
that range and there isn't enough shielding and interference happen
between the two, the fix adjusts the mode clock to try and avoid the
wifi channels in that case.
Hopefully you can merge this between turkey slices, and next week
should be quieter.
ast:
- LUT loading regression fix
nouveau:
- relocations regression fix
amdgpu:
- ttm init oops fix
- Runtime pm fix
- SI UVD suspend/resume fix
- HDCP fix for headless cards
- Sienna Cichlid golden register update
i915:
- Fix Perf/OA workaround register corruption (Lionel)
- Correct a comment statement in GVT (Yan)
- Fix GT enable/disable iterrupts, including a race condition that
prevented GPU to go idle (Chris)
- Free stale request on destroying the virtual engine (Chris)
exynos:
- config dependency fix
mediatek:
- unused var removal
- horizonal front/back porch formula fix
vc4:
- wifi and hdmi interference fix
- mode rejection fixes
- use after free fix
- cleanup some code"
* tag 'drm-fixes-2020-11-27-1' of git://anongit.freedesktop.org/drm/drm: (28 commits)
drm/nouveau: fix relocations applying logic and a double-free
drm/ast: Reload gamma LUT after changing primary plane's color format
drm/amdgpu: Fix size calculation when init onchip memory
drm/amdgpu: update golden setting for sienna_cichlid
drm/amd/display: Avoid HDCP initialization in devices without output
drm/i915/gt: Free stale request on destroying the virtual engine
drm/i915/gt: Don't cancel the interrupt shadow too early
drm/i915/gt: Track signaled breadcrumbs outside of the breadcrumb spinlock
drm/amdgpu: fix a page fault
drm/amdgpu: fix SI UVD firmware validate resume fail
drm/amd/amdgpu: fix null pointer in runtime pm
drm/i915/gt: Defer enabling the breadcrumb interrupt to after submission
drm/i915/gvt: correct a false comment of flag F_UNALIGN
drm/i915/perf: workaround register corruption in OATAILPTR
drm/vc4: kms: Don't disable the muxing of an active CRTC
drm/vc4: kms: Store the unassigned channel list in the state
drm/exynos: depend on COMMON_CLK to fix compile tests
drm/mediatek: dsi: Modify horizontal front/back porch byte formula
drm/vc4: hdmi: Disable Wifi Frequencies
dt-bindings: display: Add a property to deal with WiFi coexistence
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- thinkpad_acpi fixes: two bug-fixes and three model specific quirks
- fixes for misc other drivers: two bug-fixes and three model specific
quirks
* tag 'platform-drivers-x86-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the Irbis TW118 tablet
platform/x86: touchscreen_dmi: Add info for the Predia Basic tablet
platform/x86: intel-vbtn: Support for tablet mode on HP Pavilion 13 x360 PC
platform/x86: toshiba_acpi: Fix the wrong variable assignment
platform/x86: acer-wmi: add automatic keyboard background light toggle key as KEY_LIGHTS_TOGGLE
platform/x86: thinkpad_acpi: Whitelist P15 firmware for dual fan control
platform/x86: thinkpad_acpi: Send tablet mode switch at wakeup time
platform/x86: thinkpad_acpi: Add BAT1 is primary battery quirk for Thinkpad Yoga 11e 4th gen
platform/x86: thinkpad_acpi: Do not report SW_TABLET_MODE on Yoga 11e
platform/x86: thinkpad_acpi: add P1 gen3 second fan support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The main changes are relating to our handling of access/dirty bits,
where our low-level page-table helpers could lead to stale young
mappings and loss of the dirty bit in some cases (the latter has not
been observed in practice, but could happen when clearing "soft-dirty"
if we enabled that). These were posted as part of a larger series, but
the rest of that is less urgent and needs a v2 which I'll get to
shortly.
In other news, we've now got a set of fixes to resolve the
lockdep/tracing problems that have been plaguing us for a while, but
they're still a bit "fresh" and I plan to send them to you next week
after we've got some more confidence in them (although initial CI
results look good).
Summary:
- Fix kerneldoc warnings generated by ACPI IORT code
- Fix pte_accessible() so that access flag is ignored
- Fix missing header #include
- Fix loss of software dirty bit across pte_wrprotect() when HW DBM
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: Ensure dirty bit is preserved across pte_wrprotect()
arm64: pgtable: Fix pte_accessible()
ACPI/IORT: Fix doc warnings in iort.c
arm64/fpsimd: add <asm/insn.h> to <asm/kprobes.h> to fix fpsimd build
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
"Here's another round of IOMMU fixes for -rc6 consisting mainly of a
bunch of independent driver fixes. Thomas agreed for me to take the
x86 'tboot' fix here, as it fixes a regression introduced by a vt-d
change.
- Fix intel iommu driver when running on devices without VCCAP_REG
- Fix swiotlb and "iommu=pt" interaction under TXT (tboot)
- Fix missing return value check during device probe()
- Fix probe ordering for Qualcomm SMMU implementation
- Ensure page-sized mappings are used for AMD IOMMU buffers with SNP
RMP"
* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
iommu/vt-d: Don't read VCCAP register unless it exists
x86/tboot: Don't disable swiotlb when iommu is forced on
iommu: Check return of __iommu_attach_device()
arm-smmu-qcom: Ensure the qcom_scm driver has finished probing
iommu/amd: Enforce 4k mapping for certain IOMMU data structures
|
|
git://git.linaro.org/people/jens.wiklander/linux-tee into arm/fixes
Add writeback to valid OP-TEE shared memory types
Allows OP-TEE to work with ARMv7 based single CPU systems by allowing
writeback cache policy for shared memory.
* tag 'optee-valid-memory-type-for-v5.11' of git://git.linaro.org/people/jens.wiklander/linux-tee:
optee: add writeback to valid memory type
Link: https://lore.kernel.org/r/20201125120134.GA1642471@jade
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add support for mcan bit timing and control mode according to bosch mcan IP
version 3.3.0. The mcan version read from the Core Release field of CREL
register would be 33. Accordingly the properties are to be set for mcan v3.3.0
Signed-off-by: Pankaj Sharma <pankj.sharma@samsung.com>
Link: https://lore.kernel.org/r/1606366302-5520-1-git-send-email-pankj.sharma@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
At lest the revision 3.3.0 of the bosch m_can IP core specifies that valid
register values for "Nominal Time segment after sample point (NTSEG2)" are from
1 to 127. As the hardware uses a value of one more than the programmed value,
mean tseg2_min is 2.
This patch fixes the tseg2_min value accordingly.
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Mario Huettel <mario.huettel@gmx.net>
Acked-by: Sriram Dash <sriram.dash@samsung.com>
Link: https://lore.kernel.org/r/20201124190751.3972238-1-mkl@pengutronix.de
Fixes: b03cfc5bb0e1 ("can: m_can: Enable M_CAN version dependent initialization")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
request_threaded_irq()'s flags
The threaded IRQ handler is used for the tcan4x5x driver only. The IRQ pin of
the tcan4x5x controller is active low, so better not use IRQF_TRIGGER_FALLING
when requesting the IRQ. As this can result in missing interrupts.
Further, if the device tree specified the interrupt as "IRQ_TYPE_LEVEL_LOW",
unloading and reloading of the driver results in the following error during
ifup:
| irq: type mismatch, failed to map hwirq-31 for gpio@20a8000!
| tcan4x5x spi1.1: m_can device registered (irq=0, version=32)
| tcan4x5x spi1.1 can2: TCAN4X5X successfully initialized.
| tcan4x5x spi1.1 can2: failed to request interrupt
This patch fixes the problem by removing the IRQF_TRIGGER_FALLING from the
request_threaded_irq().
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Cc: Dan Murphy <dmurphy@ti.com>
Cc: Sriram Dash <sriram.dash@samsung.com>
Cc: Pankaj Sharma <pankj.sharma@samsung.com>
Link: https://lore.kernel.org/r/20201127093548.509253-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes
A bunch of fixes for vc4 fixing some coexistence issue between wifi and
HDMI, unsupported modes, and vblank timeouts, a fix for ast to reload
the gamma LUT after changing the plane format and a double-free fix for
nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201126085450.r3i7wvj7pizsa4l6@gilmour
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.10
1. Remove unused variable.
2. Modify horizontal front/back porch byte formula.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123234131.387-1-chunkuang.hu@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
One bug fix
. Add COMMON_CLK dependency to fix a build error below,
/usr/bin/mips-linux-gnu-ld: drivers/gpu/drm/exynos/exynos_mixer.o: in function `mixer_bind':
exynos_mixer.c:(.text+0x958): undefined reference to `clk_set_parent'
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1606184478-23384-1-git-send-email-inki.dae@samsung.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into arm/fixes
NXP/FSL SoC driver fix for 5.10
DPAA2 DPIO driver
- Fix non-static cpumask for irq affinity setting
* tag 'soc-fsl-fix-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
Link: https://lore.kernel.org/r/20201125165922.15487-1-leoyang.li@nxp.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a recently introduced build issue in the cpufreq SCMI driver
(Sudeep Holla)"
* tag 'pm-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Fix build for !CONFIG_COMMON_CLK
|
|
When a memory window is bound to a memory region, the local write access
should be set for its mtpt table.
Fixes: c7c28191408b ("RDMA/hns: Add MW support for hip08")
Link: https://lore.kernel.org/r/1606386372-21094-1-git-send-email-liweihang@huawei.com
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The maximum number of retransmission should be returned when querying QP,
not the value of retransmission counter.
Fixes: 99fcf82521d9 ("RDMA/hns: Fix the wrong value of rnr_retry when querying qp")
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1606382977-21431-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
The SRQ capacity is got from the firmware, whose field should be ended at
bit 19.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/1606382812-23636-1-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
My virtual IOMMU implementation is whining that the guest is reading a
register that doesn't exist. Only read the VCCAP_REG if the corresponding
capability is set in ECAP_REG to indicate that it actually exists.
Fixes: 3375303e8287 ("iommu/vt-d: Add custom allocator for IOASID")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Liu Yi L <yi.l.liu@intel.com>
Cc: stable@vger.kernel.org # v5.7+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/de32b150ffaa752e0cff8571b17dfb1213fbe71c.camel@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Add touchscreen info for the Irbis TW118 tablet.
Reported-and-tested-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201124110454.114286-1-hdegoede@redhat.com
|
|
Add touchscreen info for the Predia Basic tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201015194949.50566-1-hdegoede@redhat.com
|
|
The Pavilion 13 x360 PC has a chassis-type which does not indicate it is
a convertible, while it is actually a convertible. Add it to the
dmi_switches_allow_list.
Signed-off-by: Max Verevkin <me@maxverevkin.tk>
Link: https://lore.kernel.org/r/20201124131652.11165-1-me@maxverevkin.tk
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The commit 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up
variable declaration") cleans up variable declaration in
video_proc_write(). Seems it does the variable assignment in the
wrong place, this results in dead code and changes the source code
logic. Fix it by doing the assignment at the beginning of the funciton.
Fixes: 78429e55e4057 ("platform/x86: toshiba_acpi: Clean up variable declaration")
Reported-by: Tosk Robot <tencent_os_robot@tencent.com>
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Link: https://lore.kernel.org/r/1606024177-16481-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
as KEY_LIGHTS_TOGGLE
Got a dmesg message on my AMD Renoir based Acer laptop:
"acer_wmi: Unknown key number - 0x84" when toggling keyboard
background light
Signed-off-by: Timo Witte <timo.witte@gmail.com>
Reviewed-by: "Lee, Chun-Yi" <jlee@suse.com>
Link: https://lore.kernel.org/r/20200804001423.36778-1-timo.witte@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
