summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2019-12-19of: mdio: export of_mdiobus_child_is_phyAntoine Tenart
This patch exports of_mdiobus_child_is_phy, allowing to check if a child node is a network PHY. Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2019-12-19 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 8 day(s) which contain a total of 21 files changed, 269 insertions(+), 108 deletions(-). The main changes are: 1) Fix lack of synchronization between xsk wakeup and destroying resources used by xsk wakeup, from Maxim Mikityanskiy. 2) Fix pruning with tail call patching, untrack programs in case of verifier error and fix a cgroup local storage tracking bug, from Daniel Borkmann. 3) Fix clearing skb->tstamp in bpf_redirect() when going from ingress to egress which otherwise cause issues e.g. on fq qdisc, from Lorenz Bauer. 4) Fix compile warning of unused proc_dointvec_minmax_bpf_restricted() when only cBPF is present, from Alexander Lobakin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-19net/ixgbe: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. ixgbe_down already calls synchronize_rcu after setting __IXGBE_DOWN. 2. After switching the XDP program, call synchronize_rcu to let ixgbe_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down. 4. Disabling UMEM sets __IXGBE_TX_DISABLED before closing hardware resources and resetting xsk_umem. Check that bit in ixgbe_xsk_wakeup to avoid using the XDP ring when it's already destroyed. synchronize_rcu is called from ixgbe_txrx_ring_disable. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-5-maximmi@mellanox.com
2019-12-19net/i40e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
Use synchronize_rcu to wait until the XSK wakeup function finishes before destroying the resources it uses: 1. i40e_down already calls synchronize_rcu. On i40e_down either __I40E_VSI_DOWN or __I40E_CONFIG_BUSY is set. Check the latter in i40e_xsk_wakeup (the former is already checked there). 2. After switching the XDP program, call synchronize_rcu to let i40e_xsk_wakeup exit before the XDP program is freed. 3. Changing the number of channels brings the interface down (see i40e_prep_for_reset and i40e_pf_quiesce_all_vsi). 4. Disabling UMEM sets __I40E_CONFIG_BUSY, too. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-4-maximmi@mellanox.com
2019-12-19net/mlx5e: Fix concurrency issues between config flow and XSKMaxim Mikityanskiy
After disabling resources necessary for XSK (the XDP program, channels, XSK queues), use synchronize_rcu to wait until the XSK wakeup function finishes, before freeing the resources. Suspend XSK wakeups during switching channels. If the XDP program is being removed, synchronize_rcu before closing the old channels to allow XSK wakeup to complete. Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20191217162023.16011-3-maximmi@mellanox.com
2019-12-19mmc: sdhci-of-esdhc: re-implement erratum A-009204 workaroundYangbo Lu
The erratum A-009204 workaround patch was reverted because of incorrect implementation. 8b6dc6b mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" This patch is to re-implement the workaround (add a 5 ms delay before setting SYSCTL[RSTD] to make sure all the DMA transfers are finished). Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20191219032335.26528-1-yangbo.lu@nxp.com Fixes: 5dd195522562 ("mmc: sdhci-of-esdhc: add erratum A-009204 support") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18clk: qcom: Avoid SMMU/cx gdsc corner casesJeffrey Hugo
Mark the msm8998 cpu CX gdsc as votable and use the hw control to avoid corner cases with SMMU per hardware documentation. Fixes: 3f7df5baa259 ("clk: qcom: Add MSM8998 GPU Clock Controller (GPUCC) driver") Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lkml.kernel.org/r/20191217171905.5619-1-jeffrey.l.hugo@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18clk: qcom: gcc-sc7180: Fix setting flag for votable GDSCsMatthias Kaehlcke
Commit 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") sets the VOTABLE flag in .pwrsts, but it needs to be set in .flags, fix this. Fixes: 17269568f7267 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lkml.kernel.org/r/20191204120341.1.I9971817e83ee890d1096c43c5a6ce6ced53d5bd3@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18Merge tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmddLinus Torvalds
Pull tpm fixes from Jarkko Sakkinen: "Bunch of fixes for rc3" * tag 'tpmdd-next-20191219' of git://git.infradead.org/users/jjs/linux-tpmdd: tpm/tpm_ftpm_tee: add shutdown call back tpm: selftest: cleanup after unseal with wrong auth/policy test tpm: selftest: add test covering async mode tpm: fix invalid locking in NONBLOCKING mode security: keys: trusted: fix lost handle flush tpm_tis: reserve chip for duration of tpm_tis_core_init KEYS: asymmetric: return ENOMEM if akcipher_request_alloc() fails KEYS: remove CONFIG_KEYS_COMPAT
2019-12-19tpm/tpm_ftpm_tee: add shutdown call backPavel Tatashin
Add shutdown call back to close existing session with fTPM TA to support kexec scenario. Add parentheses to function names in comments as specified in kdoc. Signed-off-by: Thirupathaiah Annapureddy <thiruan@microsoft.com> Signed-off-by: Pavel Tatashin <pasha.tatashin@soleen.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-12-19drm/exynos: gsc: add missed component_delChuhong Yuan
The driver forgets to call component_del in remove to match component_add in probe. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.net>
2019-12-18net: stmmac: Always arm TX Timer at end of transmission startJose Abreu
If TX Coalesce timer is enabled we should always arm it, otherwise we may hit the case where an interrupt is missed and the TX Queue will timeout. Arming the timer does not necessarly mean it will run the tx_clean() because this function is wrapped around NAPI launcher. Fixes: 9125cdd1be11 ("stmmac: add the initial tx coalesce schema") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Enable 16KB buffer sizeJose Abreu
XGMAC supports maximum MTU that can go to 16KB. Lets add this check in the calculation of RX buffer size. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: 16KB buffer must be 16 byte alignedJose Abreu
The 16KB RX Buffer must also be 16 byte aligned. Fix it. Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: RX buffer size must be 16 byte alignedJose Abreu
We need to align the RX buffer size to at least 16 byte so that IP doesn't mis-behave. This is required by HW. Changes from v2: - Align UP and not DOWN (David) Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: xgmac: Clear previous RX buffer sizeJose Abreu
When switching between buffer sizes we need to clear the previous value. Fixes: d6ddfacd95c7 ("net: stmmac: Add DMA related callbacks for XGMAC2") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Only the last buffer has the FCS fieldJose Abreu
Only the last received buffer contains the FCS field. Check for end of packet before trying to strip the FCS field. Fixes: 88ebe2cf7f3f ("net: stmmac: Rework stmmac_rx()") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Do not accept invalid MTU valuesJose Abreu
The maximum MTU value is determined by the maximum size of TX FIFO so that a full packet can fit in the FIFO. Add a check for this in the MTU change callback. Also check if provided and rounded MTU does not passes the maximum limit of 16K. Changes from v2: - Align MTU before checking if its valid Fixes: 7ac6653a085b ("stmmac: Move the STMicroelectronics driver") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Determine earlier the size of RX bufferJose Abreu
Split Header feature needs to know the size of RX buffer but current code is determining it too late. Fix this by moving the RX buffer computation to earlier stage. Changes from v2: - Do not try to align already aligned buffer size Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: selftests: Needs to check the number of Multicast regsJose Abreu
When running the MC and UC filter tests we setup a multicast address that its expected to be blocked. If the number of available multicast registers is zero, driver will always pass the multicast packets which will fail the test. Check if available multicast addresses is enough before running the tests. Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18usb: xhci: Fix build warning seen with CONFIG_PM=nGuenter Roeck
The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin <henryl@nvidia.com> Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18clk: Move clk_core_reparent_orphans() under CONFIG_OFOlof Johansson
A recent addition exposed a helper that is only used for CONFIG_OF. Move it into the CONFIG_OF zone in this file to make the compiler stop warning about an unused function. Fixes: 66d9506440bb ("clk: walk orphan list on clock provider registration") Signed-off-by: Olof Johansson <olof@lixom.net> Link: https://lkml.kernel.org/r/20191217082501.424892072D@mail.kernel.org [sboyd@kernel.org: "Simply" move the function instead] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-12-18iommu/dma: Relax locking in iommu_dma_prepare_msi()Robin Murphy
Since commit ece6e6f0218b ("iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts"), iommu_dma_prepare_msi() should no longer have to worry about preempting itself, nor being called in atomic context at all. Thus we can downgrade the IRQ-safe locking to a simple mutex to avoid angering the new might_sleep() check in iommu_map(). Reported-by: Qian Cai <cai@lca.pw> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18perf/smmuv3: Remove the leftover put_cpu() in error pathHanjun Guo
In smmu_pmu_probe(), there is put_cpu() in the error path, which is wrong because we use raw_smp_processor_id() to get the cpu ID, not get_cpu(), remove it. While we are at it, kill 'out_cpuhp_err' altogether and just return err if we fail to add the hotplug instance. Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Hanjun Guo <guohanjun@huawei.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-12-18iommu/vt-d: Remove incorrect PSI capability checkLu Baolu
The PSI (Page Selective Invalidation) bit in the capability register is only valid for second-level translation. Intel IOMMU supporting scalable mode must support page/address selective IOTLB invalidation for first-level translation. Remove the PSI capability check in SVA cache invalidation code. Fixes: 8744daf4b0699 ("iommu/vt-d: Remove global page flush support") Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-12-18staging: wfx: fix wrong error messageJérôme Pouiller
The driver checks that the number of retries made by the device is coherent with the rate policy. However, this check make sense only if the device has returned RETRY_EXCEEDED. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-11-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix hif_set_mfp() with big endian hostsJérôme Pouiller
struct hif_mib_protected_mgmt_policy is an array of u8. There is no reason to swap its bytes. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-10-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: detect race condition in WEP authenticationJérôme Pouiller
Current code has a special case to handle association with WEP. Before to rework the tx data handling, let's try to detect any possible misuse of this code. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-9-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: ensure that retry policy always fallbacks to MCS0 / 1MbpsJérôme Pouiller
When not using HT mode, minstrel always includes 1Mbps as fallback rate. But, when using HT mode, this fallback is not included. Yet, it seems that it could save some frames. So, this patch add it unconditionally. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-8-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix rate control handlingJérôme Pouiller
A tx_retry_policy (the equivalent of a list of ieee80211_tx_rate in hardware API) is not able to include a rate multiple time. So currently, the driver merges the identical rates from the policy provided by minstrel (and it try to do the best choice it can in the associated flags) before to sent it to firmware. Until now, when rates are merged, field "count" is set to max(count1, count2). But, it means that the sum of retries for all rates could be far less than initial number of retries. So, this patch changes the value of field "count" to count1 + count2. Thus, sum of all retries for all rates stay the same. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-7-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: firmware does not support more than 32 total retriesJérôme Pouiller
The sum of all retries for a Tx frame cannot be superior to 32. There are 4 rates at most. So this patch limits number of retries per rate to 8. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-6-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: use boolean appropriatelyJérôme Pouiller
The field 'uploaded' is used as a boolean, so call it a boolean. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-5-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix counter overflowJérôme Pouiller
Some weird behaviors were observed when connection is really good and packets are small. It appears that sometime, number of packets in queues can exceed 255 and generate an overflow in field usage_count. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-4-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix case of lack of tx_retry_policiesJérôme Pouiller
In some rare cases, driver may not have any available tx_retry_policies. In this case, the driver asks to mac80211 to stop sending data. However, it seems that a race is possible and a few frames can be sent to the driver. In this case, driver can't wait for free tx_retry_policies since wfx_tx() must be atomic. So, this patch fix this case by sending these frames with the special policy number 15. The firmware normally use policy 15 to send internal frames (PS-poll, beacons, etc...). So, it is not a so bad fallback. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-3-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18staging: wfx: fix the cache of rate policies on interface resetJérôme Pouiller
Device and driver maintain a cache of rate policies (aka. tx_retry_policy in hardware API). When hif_reset() is sent to hardware, device resets its cache of rate policies. In order to keep driver in sync, it is necessary to do the same on driver. Note, when driver tries to use a rate policy that has not been defined on device, data is sent at 1Mbps. So, this patch should fix abnormal throughput observed sometime after a reset of the interface. Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Link: https://lore.kernel.org/r/20191217161318.31402-2-Jerome.Pouiller@silabs.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-18mmc: sdhci: Add a quirk for broken command queuingAdrian Hunter
Command queuing has been reported broken on some systems based on Intel GLK. A separate patch disables command queuing in some cases. This patch adds a quirk for broken command queuing, which enables users with problems to disable command queuing using sdhci module parameters for quirks. Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217095349.14592-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: sdhci: Workaround broken command queuing on Intel GLKAdrian Hunter
Command queuing has been reported broken on some Lenovo systems based on Intel GLK. This is likely a BIOS issue, so disable command queuing for Intel GLK if the BIOS vendor string is "LENOVO". Fixes: 8ee82bda230f ("mmc: sdhci-pci: Add CQHCI support for Intel GLK") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191217095349.14592-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18mmc: sdhci-of-esdhc: fix P2020 errata handlingYangbo Lu
Two previous patches introduced below quirks for P2020 platforms. - SDHCI_QUIRK_RESET_AFTER_REQUEST - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL The patches made a mistake to add them in quirks2 of sdhci_host structure, while they were defined for quirks. host->quirks2 |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks2 |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; This patch is to fix them. host->quirks |= SDHCI_QUIRK_RESET_AFTER_REQUEST; host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; Fixes: 05cb6b2a66fa ("mmc: sdhci-of-esdhc: add erratum eSDHC-A001 and A-008358 support") Fixes: a46e42712596 ("mmc: sdhci-of-esdhc: add erratum eSDHC5 support") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191216031842.40068-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-12-18Merge tag 'gvt-fixes-2019-12-18' of https://github.com/intel/gvt-linux into ↵Joonas Lahtinen
drm-intel-fixes gvt-fixes-2019-12-18 - vGPU state setting locking fix (Zhenyu) - Fix vGPU display dmabuf as read-only (Zhenyu) - Properly handle vGPU display dmabuf page pin when rendering (Tina) - Fix one guest boot warning to handle guc reset state (Fred) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> From: Zhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218051657.GA21662@zhen-hp.sh.intel.com
2019-12-18drm/i915: Fix pid leak with banned clientsTvrtko Ursulin
Get_pid_task() needs to be paired with a put_pid or we leak a pid reference every time a banned client tries to create a context. v2: * task_pid_nr helper exists! (Chris) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: b083a0870c79 ("drm/i915: Add per client max context ban limit") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191217170933.8108-1-tvrtko.ursulin@linux.intel.com (cherry picked from commit ba16a48af797db124ac100417f9229b1650ce1fb) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-18drm/i915/gem: Keep request alive while attaching fencesChris Wilson
Since commit e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex"), the request retirement can happen outside of the struct_mutex serialised only by the timeline->mutex. We drop the timeline->mutex on submitting the request (i915_request_add) so after that point, it is liable to be freed. Make sure our local reference is kept alive until we have finished attaching it to the signalers. (Note that this erodes the argument that i915_request_add should consume the reference, but that is a slightly larger patch!) Fixes: e5dadff4b093 ("drm/i915: Protect request retirement with timeline->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217134729.3297818-1-chris@chris-wilson.co.uk (cherry picked from commit e14177f19739d74839eb496a27f5f5d958beaa5b) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2019-12-17nfp: flower: fix stats id allocationJohn Hurley
As flower rules are added, they are given a stats ID based on the number of rules that can be supported in firmware. Only after the initial allocation of all available IDs does the driver begin to reuse those that have been released. The initial allocation of IDs was modified to account for multiple memory units on the offloaded device. However, this introduced a bug whereby the counter that controls the IDs could be decremented before the ID was assigned (where it is further decremented). This means that the stats ID could be assigned as -1/0xfffffff which is out of range. Fix this by only decrementing the main counter after the current ID has been assigned. Fixes: 467322e2627f ("nfp: flower: support multiple memory units for filter offloads") Signed-off-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: ag71xx: fix compile warningsOleksij Rempel
drivers/net/ethernet/atheros/ag71xx.c: In function 'ag71xx_probe': drivers/net/ethernet/atheros/ag71xx.c:1776:30: warning: passing argument 2 of 'of_get_phy_mode' makes pointer from integer without a cast [-Wint-conversion] In file included from drivers/net/ethernet/atheros/ag71xx.c:33: ./include/linux/of_net.h:15:69: note: expected 'phy_interface_t *' {aka 'enum <anonymous> *'} but argument is of type 'int' Fixes: 0c65b2b90d13c1 ("net: of_get_phy_mode: Change API to solve int/unit warnings") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17net: qlogic: Fix error paths in ql_alloc_large_buffers()Ben Hutchings
ql_alloc_large_buffers() has the usual RX buffer allocation loop where it allocates skbs and maps them for DMA. It also treats failure as a fatal error. There are (at least) three bugs in the error paths: 1. ql_free_large_buffers() assumes that the lrg_buf[] entry for the first buffer that couldn't be allocated will have .skb == NULL. But the qla_buf[] array is not zero-initialised. 2. ql_free_large_buffers() DMA-unmaps all skbs in lrg_buf[]. This is incorrect for the last allocated skb, if DMA mapping failed. 3. Commit 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") added a direct call to dev_kfree_skb_any() after the skb is recorded in lrg_buf[], so ql_free_large_buffers() will double-free it. The bugs are somewhat inter-twined, so fix them all at once: * Clear each entry in qla_buf[] before attempting to allocate an skb for it. This goes half-way to fixing bug 1. * Set the .skb field only after the skb is DMA-mapped. This fixes the rest. Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue ...") Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() ...") Fixes: 1acb8f2a7a9f ("net: qlogic: Fix memory leak in ql_alloc_large_buffers") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17Merge tag 'wireless-drivers-2019-12-17' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.5 First set of fixes for v5.5. Fixing security issues, some regressions and few major bugs. mwifiex * security fix for handling country Information Elements (CVE-2019-14895) * security fix for handling TDLS Information Elements ath9k * fix endian issue with ath9k_pci_owl_loader mt76 * fix default mac address handling iwlwifi * fix merge damage which lead to firmware crashing during boot on some devices * fix device initialisation regression on some devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17dpaa2-ptp: fix double free of the ptp_qoriq IRQIoana Ciornei
Upon reusing the ptp_qoriq driver, the ptp_qoriq_free() function was used on the remove path to free any allocated resources. The ptp_qoriq IRQ is among these resources that are freed in ptp_qoriq_free() even though it is also a managed one (allocated using devm_request_threaded_irq). Drop the resource managed version of requesting the IRQ in order to not trigger a double free of the interrupt as below: [ 226.731005] Trying to free already-free IRQ 126 [ 226.735533] WARNING: CPU: 6 PID: 749 at kernel/irq/manage.c:1707 __free_irq+0x9c/0x2b8 [ 226.743435] Modules linked in: [ 226.746480] CPU: 6 PID: 749 Comm: bash Tainted: G W 5.4.0-03629-gfd7102c32b2c-dirty #912 [ 226.755857] Hardware name: NXP Layerscape LX2160ARDB (DT) [ 226.761244] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 226.766022] pc : __free_irq+0x9c/0x2b8 [ 226.769758] lr : __free_irq+0x9c/0x2b8 [ 226.773493] sp : ffff8000125039f0 (...) [ 226.856275] Call trace: [ 226.858710] __free_irq+0x9c/0x2b8 [ 226.862098] free_irq+0x30/0x70 [ 226.865229] devm_irq_release+0x14/0x20 [ 226.869054] release_nodes+0x1b0/0x220 [ 226.872790] devres_release_all+0x34/0x50 [ 226.876790] device_release_driver_internal+0x100/0x1c0 Fixes: d346c9e86d86 ("dpaa2-ptp: reuse ptp_qoriq driver") Cc: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-17Merge tag 'regulator-fix-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "A small set of fixes for mostly minor issues here, the only real code ones are Wen Yang's fixes for error handling in the core and Christian Marussi's list_voltage() change which is a fix for disruptively bad performance for regulators with continuous voltage control (which are rare)" * tag 'regulator-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: rn5t618: fix module aliases regulator: max77650: add of_match table regulator: core: avoid unneeded .list_voltage calls regulator: s5m8767: Fix a warning message regulator: core: fix regulator_register() error paths to properly release rdev regulator: fix use after free issue
2019-12-17Merge tag 'spi-fix-v5.5-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A relatively large set of fixes here, the biggest part of it is for fallout from the GPIO descriptor rework that affected several of the devices with usable native chip select support. There's also some new PCI IDs for Intel Jasper Lake devices. The conversion to platform_get_irq() in the fsl driver is an incremental fix for build errors introduced on SPARC by the earlier fix for error handling in probe in that driver" * tag 'spi-fix-v5.5-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fsl: use platform_get_irq() instead of of_irq_to_resource() spi: nxp-fspi: Ensure width is respected in spi-mem operations spi: spi-ti-qspi: Fix a bug when accessing non default CS spi: fsl: don't map irq during probe spi: spi-cavium-thunderx: Add missing pci_release_regions() spi: sprd: Fix the incorrect SPI register gpiolib: of: Make of_gpio_spi_cs_get_count static spi: fsl: Handle the single hardwired chipselect case gpio: Handle counting of Freescale chipselects spi: fsl: Fix GPIO descriptor support spi: dw: Correct handling of native chipselect spi: cadence: Correct handling of native chipselect spi: pxa2xx: Add support for Intel Jasper Lake
2019-12-17Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Protect presistent EFI memory reservations from kexec, fix EFIFB early console, EFI stub graphics output fixes and other misc fixes." * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Don't attempt to map RCI2 config table if it doesn't exist efi/earlycon: Remap entire framebuffer after page initialization efi: Fix efi_loaded_image_t::unload type efi/gop: Fix memory leak in __gop_query32/64() efi/gop: Return EFI_SUCCESS if a usable GOP was found efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs efi/memreserve: Register reservations as 'reserved' in /proc/iomem
2019-12-17random: don't forget compat_ioctl on urandomJason A. Donenfeld
Recently, there's been some compat ioctl cleanup, in which large hardcoded lists were replaced with compat_ptr_ioctl. One of these changes involved removing the random.c hardcoded list entries and adding a compat ioctl function pointer to the random.c fops. In the process, urandom was forgotten about, so this commit fixes that oversight. Fixes: 507e4e2b430b ("compat_ioctl: remove /dev/random commands") Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20191217172455.186395-1-Jason@zx2c4.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-03 13:30:48 +0000