summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2019-09-03EDAC/mc_sysfs: Remove pointless gotosRobert Richter
Use direct returns instead of gotos. Error handling code becomes smaller and better readable. Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-4-rrichter@marvell.com
2019-09-03EDAC: Prefer 'unsigned int' to bare use of 'unsigned'Robert Richter
Use of 'unsigned int' instead of bare use of 'unsigned'. Fix this for edac_mc*, ghes and the i5100 driver as reported by checkpatch.pl. While at it, struct member dev_ch_attribute->channel is always used as unsigned int. Change type to unsigned int to avoid type casts. [ bp: Massage. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190902123216.9809-2-rrichter@marvell.com
2019-08-23EDAC/amd64: Support asymmetric dual-rank DIMMsYazen Ghannam
Future AMD systems will support asymmetric dual-rank DIMMs. These are DIMMs where the ranks are of different sizes. The even rank will use the Primary Even Chip Select registers and the odd rank will use the Secondary Odd Chip Select registers. Recognize if a Secondary Odd Chip Select is being used. Use the Secondary Odd Address Mask when calculating the chip select size. [ bp: move csrow_sec_enabled() to the header, fix CS_ODD define and tone-down the capitalized words spelling. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-8-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Cache secondary Chip Select registersYazen Ghannam
AMD Family 17h systems have a set of secondary Chip Select Base Addresses and Address Masks. These do not represent unique Chip Selects, rather they are used in conjunction with the primary Chip Select registers in certain cases. Cache these secondary Chip Select registers for future use. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-7-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Decode syndrome before translating addressYazen Ghannam
AMD Family 17h systems currently require address translation in order to report the system address of a DRAM ECC error. This is currently done before decoding the syndrome information. The syndrome information does not depend on the address translation, so the proper EDAC csrow/channel reporting can function without the address. However, the syndrome information will not be decoded if the address translation fails. Decode the syndrome information before doing the address translation. The syndrome information is architecturally defined in MCA_SYND and can be considered robust. The address translation is system-specific and may fail on newer systems without proper updates to the translation algorithm. Fixes: 713ad54675fd ("EDAC, amd64: Define and register UMC error decode function") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-6-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Find Chip Select memory size using Address MaskYazen Ghannam
Chip Select memory size reporting on AMD Family 17h was recently fixed in order to account for interleaving. However, the current method is not robust. The Chip Select Address Mask can be used to find the memory size. There are a couple of cases. 1) For single-rank and dual-rank non-interleaved, use the address mask plus 1 as the size. 2) For dual-rank interleaved, do #1 but "de-interleave" the address mask first. Always "de-interleave" the address mask in order to simplify the code flow. Bit mask manipulation is necessary to check for interleaving, so just go ahead and do the de-interleaving. In the non-interleaved case, the original and de-interleaved address masks will be the same. To de-interleave the mask, count the number of zero bits in the middle of the mask and swap them with the most significant bits. For example, Original=0xFFFF9FE, De-interleaved=0x3FFFFFE Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-5-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Initialize DIMM info for systems with more than two channelsYazen Ghannam
Currently, the DIMM info for AMD Family 17h systems is initialized in init_csrows(). This function is shared with legacy systems, and it has a limit of two channel support. This prevents initialization of the DIMM info for a number of ranks, so there will be missing ranks in the EDAC sysfs. Create a new init_csrows_df() for Family17h+ and revert init_csrows() back to pre-Family17h support. Loop over all channels in the new function in order to support systems with more than two channels. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-4-Yazen.Ghannam@amd.com
2019-08-23EDAC/amd64: Recognize DRAM device type ECC capabilityYazen Ghannam
AMD Family 17h systems support x4 and x16 DRAM devices. However, the device type is not checked when setting mci.edac_ctl_cap. Set the appropriate capability flag based on the device type. Default to x8 DRAM device when neither the x4 or x16 bits are set. [ bp: reverse cpk_en check to save an indentation level. ] Fixes: 2d09d8f301f5 ("EDAC, amd64: Determine EDAC MC capabilities on Fam17h") Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-3-Yazen.Ghannam@amd.com
2019-08-22EDAC/amd64: Support more than two controllers for chip selects handlingYazen Ghannam
The struct chip_select array that's used for saving chip select bases and masks is fixed at length of two. There should be one struct chip_select for each controller, so this array should be increased to support systems that may have more than two controllers. Increase the size of the struct chip_select array to eight, which is the largest number of controllers per die currently supported on AMD systems. Fix number of DIMMs and Chip Select bases/masks on Family17h, because AMD Family 17h systems support 2 DIMMs, 4 CS bases, and 2 CS masks per channel. Also, carve out the Family 17h+ reading of the bases/masks into a separate function. This effectively reverts the original bases/masks reading code to before Family 17h support was added. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-2-Yazen.Ghannam@amd.com
2019-08-14EDAC/mc: Cleanup _edac_mc_free() codeRobert Richter
Remove needless and boilerplate variable declarations. No functional changes. [ bp: Add newlines for better readability. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624150758.6695-10-rrichter@marvell.com
2019-08-09EDAC, pnd2: Fix ioremap() size in dnv_rd_reg()Stephen Douthit
Depending on how BIOS has marked the reserved region containing the 32KB MCHBAR you can get warnings like: resource sanity check: requesting [mem 0xfed10000-0xfed1ffff], which spans more than reserved [mem 0xfed10000-0xfed17fff] caller dnv_rd_reg+0xc8/0x240 [pnd2_edac] mapping multiple BARs Not all of the mmio regions used in dnv_rd_reg() are the same size. The MCHBAR window is 32KB and the sideband ports are 64KB. Pass the correct size to ioremap() depending on which resource we're reading from. Signed-off-by: Stephen Douthit <stephend@silicom-usa.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-08-08EDAC, mellanox: Add ECC support for BlueField DDR4Shravan Kumar Ramani
Add ECC support for Mellanox BlueField SoC DDR controller. This requires SMC to the running Arm Trusted Firmware to report what is the current memory configuration. Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Shravan Kumar Ramani <sramani@mellanox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-08-07EDAC/altera: Use the proper type for the IRQ status bitsDan Carpenter
Smatch complains about the cast of a u32 pointer to unsigned long: drivers/edac/altera_edac.c:1878 altr_edac_a10_irq_handler() warn: passing casted pointer '&irq_status' to 'find_first_bit()' This code wouldn't work on a 64 bit big endian system because it would read past the end of &irq_status. [ bp: massage. ] Fixes: 13ab8448d2c9 ("EDAC, altera: Add ECC Manager IRQ controller support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: James Morse <james.morse@arm.com> Cc: kernel-janitors@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624134717.GA1754@mwanda
2019-08-03EDAC/mc: Fix grain_bits calculationRobert Richter
The grain in EDAC is defined as "minimum granularity for an error report, in bytes". The following calculation of the grain_bits in edac_mc is wrong: grain_bits = fls_long(e->grain) + 1; Where grain_bits is defined as: grain = 1 << grain_bits Example: grain = 8 # 64 bit (8 bytes) grain_bits = fls_long(8) + 1 grain_bits = 4 + 1 = 5 grain = 1 << grain_bits grain = 1 << 5 = 32 Replace it with the correct calculation: grain_bits = fls_long(e->grain - 1); The example gives now: grain_bits = fls_long(8 - 1) grain_bits = fls_long(7) grain_bits = 3 grain = 1 << 3 = 8 Also, check if the hardware reports a reasonable grain != 0 and fallback with a warning to 1 byte granularity otherwise. [ bp: massage a bit. ] Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190624150758.6695-2-rrichter@marvell.com
2019-07-25edac: altera: Move Stratix10 SDRAM ECC to peripheralThor Thayer
ARM32 SoCFPGAs had separate IRQs for SDRAM. ARM64 SoCFPGAs send all DBEs to SError so filtering by source is necessary. The Stratix10 SDRAM ECC is a better match with the generic Altera peripheral ECC framework because the linked list can be searched to find the ECC block offset and printout the DBE Address. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Acked-by: James Morse <james.morse@arm.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-21iommu/amd: fix a crash in iova_magazine_free_pfnsQian Cai
The commit b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") incorrectly changed the checking from dma_ops_alloc_iova() in map_sg() causes a crash under memory pressure as dma_ops_alloc_iova() never return DMA_MAPPING_ERROR on failure but 0, so the error handling is all wrong. kernel BUG at drivers/iommu/iova.c:801! Workqueue: kblockd blk_mq_run_work_fn RIP: 0010:iova_magazine_free_pfns+0x7d/0xc0 Call Trace: free_cpu_cached_iovas+0xbd/0x150 alloc_iova_fast+0x8c/0xba dma_ops_alloc_iova.isra.6+0x65/0xa0 map_sg+0x8c/0x2a0 scsi_dma_map+0xc6/0x160 pqi_aio_submit_io+0x1f6/0x440 [smartpqi] pqi_scsi_queue_command+0x90c/0xdd0 [smartpqi] scsi_queue_rq+0x79c/0x1200 blk_mq_dispatch_rq_list+0x4dc/0xb70 blk_mq_sched_dispatch_requests+0x249/0x310 __blk_mq_run_hw_queue+0x128/0x200 blk_mq_run_work_fn+0x27/0x30 process_one_work+0x522/0xa10 worker_thread+0x63/0x5b0 kthread+0x1d2/0x1f0 ret_from_fork+0x22/0x40 Fixes: b3aa14f02254 ("iommu: remove the mapping_error dma_map_ops method") Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-21Merge tag 'ntb-5.3' of git://github.com/jonmason/ntbLinus Torvalds
Pull NTB updates from Jon Mason: "New feature to add support for NTB virtual MSI interrupts, the ability to test and use this feature in the NTB transport layer. Also, bug fixes for the AMD and Switchtec drivers, as well as some general patches" * tag 'ntb-5.3' of git://github.com/jonmason/ntb: (22 commits) NTB: Describe the ntb_msi_test client in the documentation. NTB: Add MSI interrupt support to ntb_transport NTB: Add ntb_msi_test support to ntb_test NTB: Introduce NTB MSI Test Client NTB: Introduce MSI library NTB: Rename ntb.c to support multiple source files in the module NTB: Introduce functions to calculate multi-port resource index NTB: Introduce helper functions to calculate logical port number PCI/switchtec: Add module parameter to request more interrupts PCI/MSI: Support allocating virtual MSI interrupts ntb_hw_switchtec: Fix setup MW with failure bug ntb_hw_switchtec: Skip unnecessary re-setup of shared memory window for crosslink case ntb_hw_switchtec: Remove redundant steps of switchtec_ntb_reinit_peer() function NTB: correct ntb_dev_ops and ntb_dev comment typos NTB: amd: Silence shift wrapping warning in amd_ntb_db_vector_mask() ntb_hw_switchtec: potential shift wrapping bug in switchtec_ntb_init_sndev() NTB: ntb_transport: Ensure qp->tx_mw_dma_addr is initaliazed NTB: ntb_hw_amd: set peer limit register NTB: ntb_perf: Clear stale values in doorbell and command SPAD register NTB: ntb_perf: Disable NTB link after clearing peer XLAT registers ...
2019-07-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull more input updates from Dmitry Torokhov: - Apple SPI keyboard and trackpad driver for newer Macs - ALPS driver will ignore trackpoint-only devices to give the trackpoint driver a chance to handle them properly - another Lenovo is switched over to SMbus from PS/2 - assorted driver fixups. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - fix a mismatch between a condition check and its comment Input: psmouse - fix build error of multiple definition Input: applespi - remove set but not used variables 'sts' Input: add Apple SPI keyboard and trackpad driver Input: alps - don't handle ALPS cs19 trackpoint-only device Input: hyperv-keyboard - remove dependencies on PAGE_SIZE for ring buffer Input: adp5589 - initialize GPIO controller parent device Input: iforce - remove empty multiline comments Input: synaptics - fix misuse of strlcpy Input: auo-pixcir-ts - switch to using devm_add_action_or_reset() Input: gtco - bounds check collection indent level Input: mtk-pmic-keys - add of_node_put() before return Input: sun4i-lradc-keys - add of_node_put() before return Input: synaptics - whitelist Lenovo T580 SMBus intertouch
2019-07-20Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is the final round of mostly small fixes in our initial submit. It's mostly minor fixes and driver updates. The only change of note is adding a virt_boundary_mask to the SCSI host and host template to parametrise this for NVMe devices instead of having them do a call in slave_alloc. It's a fairly straightforward conversion except in the two NVMe handling drivers that didn't set it who now have a virtual infinity parameter added" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits) scsi: megaraid_sas: set an unlimited max_segment_size scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs scsi: IB/srp: set virt_boundary_mask in the scsi host scsi: IB/iser: set virt_boundary_mask in the scsi host scsi: storvsc: set virt_boundary_mask in the scsi host template scsi: ufshcd: set max_segment_size in the scsi host template scsi: core: take the DMA max mapping size into account scsi: core: add a host / host template field for the virt boundary scsi: core: Fix race on creating sense cache scsi: sd_zbc: Fix compilation warning scsi: libfc: fix null pointer dereference on a null lport scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized scsi: zfcp: fix request object use-after-free in send path causing wrong traces scsi: zfcp: fix request object use-after-free in send path causing seqno errors scsi: megaraid_sas: Update driver version to 07.710.50.00 scsi: megaraid_sas: Add module parameter for FW Async event logging scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers scsi: megaraid_sas: Fix calculation of target ID scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade ...
2019-07-20Merge tag 'kbuild-v5.3-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - match the directory structure of the linux-libc-dev package to that of Debian-based distributions - fix incorrect include/config/auto.conf generation when Kconfig creates it along with the .config file - remove misleading $(AS) from documents - clean up precious tag files by distclean instead of mrproper - add a new coccinelle patch for devm_platform_ioremap_resource migration - refactor module-related scripts to read modules.order instead of $(MODVERDIR)/*.mod files to get the list of created modules - remove MODVERDIR - update list of header compile-test - add -fcf-protection=none flag to avoid conflict with the retpoline flags when CONFIG_RETPOLINE=y - misc cleanups * tag 'kbuild-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits) kbuild: add -fcf-protection=none when using retpoline flags kbuild: update compile-test header list for v5.3-rc1 kbuild: split out *.mod out of {single,multi}-used-m rules kbuild: remove 'prepare1' target kbuild: remove the first line of *.mod files kbuild: create *.mod with full directory path and remove MODVERDIR kbuild: export_report: read modules.order instead of .tmp_versions/*.mod kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver kbuild: remove duplication from modules.order in sub-directories kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin} kbuild: do not create empty modules.order in the prepare stage coccinelle: api: add devm_platform_ioremap_resource script kbuild: compile-test headers listed in header-test-m as well kbuild: remove unused hostcc-option kbuild: remove tag files by distclean instead of mrproper kbuild: add --hash-style= and --build-id unconditionally kbuild: get rid of misleading $(AS) from documents ...
2019-07-20Merge branch 'next' into for-linusDmitry Torokhov
Prepare second round of input updates for 5.3 merge window.
2019-07-19Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ...
2019-07-19Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ...
2019-07-19Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC platform changes. Main theme this merge window: - The Netx platform (Netx 100/500) platform is removed by Linus Walleij-- the SoC doesn't have active maintainers with hardware, and in discussions with the vendor the agreement was that it's OK to remove. - Russell King has a series of patches that cleans up and refactors SA1101 and RiscPC support" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) ARM: stm32: use "depends on" instead of "if" after prompt ARM: sa1100: convert to common clock framework ARM: exynos: Cleanup cppcheck shifting warning ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view ARM: exynos: Only build MCPM support if used arm: add missing include platform-data/atmel.h ARM: davinci: Use GPIO lookup table for DA850 LEDs ARM: OMAP2: drop explicit assembler architecture ARM: use arch_extension directive instead of arch argument ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB ARM: riscpc: enable chained scatterlist support ARM: riscpc: reduce IRQ handling code ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc ARM: riscpc: parse video information from tagged list ARM: riscpc: add ecard quirk for Atomwide 3port serial card MAINTAINERS: mvebu: Add git entry soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh ARM: OMAP2+: Make some variables static ...
2019-07-19Merge tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Daniel Vetter: "Dave is back in shape, but now family got it so I'm doing the pull. Two things worthy of note: - nouveau feature pull was way too late, Dave&me decided to not take that, so Ben spun up a pull with just the fixes. - after some chatting with the arm display maintainers we decided to change a bit how that's maintained, for more oversight/review and cross vendor collab. More details below: nouveau: - bugfixes - TU116 enabling (minor iteration) :w amdgpu: - large pile of fixes for new hw support this release (navi, vega20) - audio hotplug fix - bunch of corner cases and small fixes all over for amdgpu/kfd komeda: - back out some new properties (from this merge window) that needs more pondering. bochs: - fb pitch setup core: - a new panel quirk - misc fixes" * tag 'drm-next-2019-07-19' of git://anongit.freedesktop.org/drm/drm: (73 commits) drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bug drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSP drm/nouveau: fix memory leak in nouveau_conn_reset() drm/nouveau/dmem: missing mutex_lock in error path drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors reads drm/nouveau: fix bogus GPL-2 license header drm/nouveau: fix bogus GPL-2 license header drm/nouveau/i2c: Enable i2c pads & busses during preinit drm/nouveau/disp/tu102-: wire up scdc parameter setter drm/nouveau/core: recognise TU116 chipset drm/nouveau/kms: disallow dual-link harder if hdmi connection detected drm/nouveau/disp/nv50-: fix center/aspect-corrected scaling drm/nouveau/disp/nv50-: force scaler for any non-default LVDS/eDP modes drm/nouveau/mcp89/mmu: Use mcp77_mmu_new instead of g84_mmu_new on MCP89. drm/amd/display: init res_pool dccg_ref, dchub_ref with xtalin_freq drm/amdgpu/pm: remove check for pp funcs in freq sysfs handlers drm/amd/display: Force uclk to max for every state drm/amdkfd: Remove GWS from process during uninit drm/amd/amdgpu: Fix offset for vmid selection in debugfs interface drm/amd/powerplay: update vega20 driver if to fit latest SMU firmware ...
2019-07-19Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix missed wake-up race in padata - Use crypto_memneq in ccp - Fix version check in ccp - Fix fuzz test failure in ccp - Fix potential double free in crypto4xx - Fix compile warning in stm32 * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: padata: use smp_mb in padata_reorder to avoid orphaned padata jobs crypto: ccp - Fix SEV_VERSION_GREATER_OR_EQUAL crypto: ccp/gcm - use const time tag comparison. crypto: ccp - memset structure fields to zero before reuse crypto: crypto4xx - fix a potential double free in ppc4xx_trng_probe crypto: stm32/hash - Fix incorrect printk modifier for size_t
2019-07-19Merge tag 'for-linus-5.3a-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Fixes and features: - A series to introduce a common command line parameter for disabling paravirtual extensions when running as a guest in virtualized environment - A fix for int3 handling in Xen pv guests - Removal of the Xen-specific tmem driver as support of tmem in Xen has been dropped (and it was experimental only) - A security fix for running as Xen dom0 (XSA-300) - A fix for IRQ handling when offlining cpus in Xen guests - Some small cleanups" * tag 'for-linus-5.3a-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: let alloc_xenballooned_pages() fail if not enough memory free xen/pv: Fix a boot up hang revealed by int3 self test x86/xen: Add "nopv" support for HVM guest x86/paravirt: Remove const mark from x86_hyper_xen_hvm variable xen: Map "xen_nopv" parameter to "nopv" and mark it obsolete x86: Add "nopv" parameter to disable PV extensions x86/xen: Mark xen_hvm_need_lapic() and xen_x2apic_para_available() as __init xen: remove tmem driver Revert "x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized" xen/events: fix binding user event channels to cpus
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix AF_XDP cq entry leak, from Ilya Maximets. 2) Fix handling of PHY power-down on RTL8411B, from Heiner Kallweit. 3) Add some new PCI IDs to iwlwifi, from Ihab Zhaika. 4) Fix handling of neigh timers wrt. entries added by userspace, from Lorenzo Bianconi. 5) Various cases of missing of_node_put(), from Nishka Dasgupta. 6) The new NET_ACT_CT needs to depend upon NF_NAT, from Yue Haibing. 7) Various RDS layer fixes, from Gerd Rausch. 8) Fix some more fallout from TCQ_F_CAN_BYPASS generalization, from Cong Wang. 9) Fix FIB source validation checks over loopback, also from Cong Wang. 10) Use promisc for unsupported number of filters, from Justin Chen. 11) Missing sibling route unlink on failure in ipv6, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (90 commits) tcp: fix tcp_set_congestion_control() use from bpf hook ag71xx: fix return value check in ag71xx_probe() ag71xx: fix error return code in ag71xx_probe() usb: qmi_wwan: add D-Link DWM-222 A2 device ID bnxt_en: Fix VNIC accounting when enabling aRFS on 57500 chips. net: dsa: sja1105: Fix missing unlock on error in sk_buff() gve: replace kfree with kvfree selftests/bpf: fix test_xdp_noinline on s390 selftests/bpf: fix "valid read map access into a read-only array 1" on s390 net/mlx5: Replace kfree with kvfree MAINTAINERS: update netsec driver ipv6: Unlink sibling route in case of failure liquidio: Replace vmalloc + memset with vzalloc udp: Fix typo in net/ipv4/udp.c net: bcmgenet: use promisc for unsupported filters ipv6: rt6_check should return NULL if 'from' is NULL tipc: initialize 'validated' field of received packets selftests: add a test case for rp_filter fib: relax source validation check for loopback packets mlxsw: spectrum: Do not process learned records with a dummy FID ...
2019-07-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge yet more updates from Andrew Morton: "The rest of MM and a kernel-wide procfs cleanup. Summary of the more significant patches: - Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. David Hildenbrand. Some spring-cleaning of the memory hotplug code, notably in drivers/base/memory.c - "mm: thp: fix false negative of shmem vma's THP eligibility". Yang Shi. Fix /proc/pid/smaps output for THP pages used in shmem. - "resource: fix locking in find_next_iomem_res()" + 1. Nadav Amit. Bugfix and speedup for kernel/resource.c - Patch series "mm: Further memory block device cleanups", David Hildenbrand. More spring-cleaning of the memory hotplug code. - Patch series "mm: Sub-section memory hotplug support". Dan Williams. Generalise the memory hotplug code so that pmem can use it more completely. Then remove the hacks from the libnvdimm code which were there to work around the memory-hotplug code's constraints. - "proc/sysctl: add shared variables for range check", Matteo Croce. We have about 250 instances of int zero; ... .extra1 = &zero, in the tree. This is a tree-wide sweep to make all those private "zero"s and "one"s use global variables. Alas, it isn't practical to make those two global integers const" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (38 commits) proc/sysctl: add shared variables for range check mm: migrate: remove unused mode argument mm/sparsemem: cleanup 'section number' data types libnvdimm/pfn: stop padding pmem namespaces to section alignment libnvdimm/pfn: fix fsdax-mode namespace info-block zero-fields mm/devm_memremap_pages: enable sub-section remap mm: document ZONE_DEVICE memory-model implications mm/sparsemem: support sub-section hotplug mm/sparsemem: prepare for sub-section ranges mm: kill is_dev_zone() helper mm/hotplug: kill is_dev_zone() usage in __remove_pages() mm/sparsemem: convert kmalloc_section_memmap() to populate_section_memmap() mm/hotplug: prepare shrink_{zone, pgdat}_span for sub-section removal mm/sparsemem: add helpers track active portions of a section at boot mm/sparsemem: introduce a SECTION_IS_EARLY flag mm/sparsemem: introduce struct mem_section_usage drivers/base/memory.c: get rid of find_memory_block_hinted() mm/memory_hotplug: move and simplify walk_memory_blocks() mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of pfns mm: make register_mem_sect_under_node() static ...
2019-07-19Input: alps - fix a mismatch between a condition check and its commentHui Wang
In the function alps_is_cs19_trackpoint(), we check if the param[1] is in the 0x20~0x2f range, but the code we wrote for this checking is not correct: (param[1] & 0x20) does not mean param[1] is in the range of 0x20~0x2f, it also means the param[1] is in the range of 0x30~0x3f, 0x60~0x6f... Now fix it with a new condition checking ((param[1] & 0xf0) == 0x20). Fixes: 7e4935ccc323 ("Input: alps - don't handle ALPS cs19 trackpoint-only device") Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19Input: psmouse - fix build error of multiple definitionYueHaibing
trackpoint_detect() should be static inline while CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails: drivers/input/mouse/alps.o: In function `trackpoint_detect': alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect' drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 55e3d9224b60 ("Input: psmouse - allow disabing certain protocol extensions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19Input: applespi - remove set but not used variables 'sts'Mao Wenan
Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/keyboard/applespi.c: In function applespi_set_bl_level: drivers/input/keyboard/applespi.c:902:6: warning: variable sts set but not used [-Wunused-but-set-variable] Fixes: b426ac0452093d ("Input: add Apple SPI keyboard and trackpad driver") Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19Input: add Apple SPI keyboard and trackpad driverRonald Tschalär
The keyboard and trackpad on recent MacBook's (since 8,1) and MacBookPro's (13,* and 14,*) are attached to an SPI controller instead of USB, as previously. The higher level protocol is not publicly documented and hence has been reverse engineered. As a consequence there are still a number of unknown fields and commands. However, the known parts have been working well and received extensive testing and use. In order for this driver to work, the proper SPI drivers need to be loaded too; for MB8,1 these are spi_pxa2xx_platform and spi_pxa2xx_pci; for all others they are spi_pxa2xx_platform and intel_lpss_pci. Link: https://bugzilla.kernel.org/show_bug.cgi?id=99891 Link: https://bugzilla.kernel.org/show_bug.cgi?id=108331 Signed-off-by: Ronald Tschalär <ronald@innovation.ch> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-07-19Merge branch 'linux-5.3' of git://github.com/skeggsb/linux into drm-nextDave Airlie
nouveau fixes and TU116 enablement. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <skeggsb@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv5hZ3B4S9cVTPd2-Ug7dMSasLPJrWMyoDo4MOg8cbXWkA@mail.gmail.com
2019-07-19Merge tag 'drm-next-5.3-2019-07-18' of ↵Dave Airlie
git://people.freedesktop.org/~agd5f/linux into drm-next drm-next-5.3-2019-07-18: amdgpu: - Navi DC fix for secondary adapters - Fix Navi flickering with high res panels - Navi SMU fixes - Vega20 SMU fixes - Fixes for audio hotplug on HG systems - Fix for potential integer overflows on large buffer migrations - debugfs fixes for umr - Various other small fixes amdkfd: - Apply noretry setting consistently - Fix hang in eviction - Properly clean up GWS on uninit UAPI: - clarify a comment on ctx priority Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190718211525.3374-1-alexander.deucher@amd.com
2019-07-19drm/nouveau/secboot/gp102-: remove WAR for SEC2 RTOS start bugBen Skeggs
Appears to be fixed by "flcn/gp102-: improve implementation of bind_context() on SEC2/GSP". Tested on GP10[24678] and GV100. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau/flcn/gp102-: improve implementation of bind_context() on SEC2/GSPBen Skeggs
Fixes various issues encountered while attempting to initialise ACR. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau: fix memory leak in nouveau_conn_reset()Yongxin Liu
In nouveau_conn_reset(), if connector->state is true, __drm_atomic_helper_connector_destroy_state() will be called, but the memory pointed by asyc isn't freed. Memory leak happens in the following function __drm_atomic_helper_connector_reset(), where newly allocated asyc->state will be assigned to connector->state. So using nouveau_conn_atomic_destroy_state() instead of __drm_atomic_helper_connector_destroy_state to free the "old" asyc. Here the is the log showing memory leak. unreferenced object 0xffff8c5480483c80 (size 192): comm "kworker/0:2", pid 188, jiffies 4294695279 (age 53.179s) hex dump (first 32 bytes): 00 f0 ba 7b 54 8c ff ff 00 00 00 00 00 00 00 00 ...{T........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000005005c0d0>] kmem_cache_alloc_trace+0x195/0x2c0 [<00000000a122baed>] nouveau_conn_reset+0x25/0xc0 [nouveau] [<000000004fd189a2>] nouveau_connector_create+0x3a7/0x610 [nouveau] [<00000000c73343a8>] nv50_display_create+0x343/0x980 [nouveau] [<000000002e2b03c3>] nouveau_display_create+0x51f/0x660 [nouveau] [<00000000c924699b>] nouveau_drm_device_init+0x182/0x7f0 [nouveau] [<00000000cc029436>] nouveau_drm_probe+0x20c/0x2c0 [nouveau] [<000000007e961c3e>] local_pci_probe+0x47/0xa0 [<00000000da14d569>] work_for_cpu_fn+0x1a/0x30 [<0000000028da4805>] process_one_work+0x27c/0x660 [<000000001d415b04>] worker_thread+0x22b/0x3f0 [<0000000003b69f1f>] kthread+0x12f/0x150 [<00000000c94c29b7>] ret_from_fork+0x3a/0x50 Signed-off-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau/dmem: missing mutex_lock in error pathRalph Campbell
In nouveau_dmem_pages_alloc(), the drm->dmem->mutex is unlocked before calling nouveau_dmem_chunk_alloc() as shown when CONFIG_PROVE_LOCKING is enabled: [ 1294.871933] ===================================== [ 1294.876656] WARNING: bad unlock balance detected! [ 1294.881375] 5.2.0-rc3+ #5 Not tainted [ 1294.885048] ------------------------------------- [ 1294.889773] test-malloc-vra/6299 is trying to release lock (&drm->dmem->mutex) at: [ 1294.897482] [<ffffffffa01a220f>] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.905782] but there are no more locks to release! [ 1294.910690] [ 1294.910690] other info that might help us debug this: [ 1294.917249] 1 lock held by test-malloc-vra/6299: [ 1294.921881] #0: 0000000016e10454 (&mm->mmap_sem#2){++++}, at: nouveau_svmm_bind+0x142/0x210 [nouveau] [ 1294.931313] [ 1294.931313] stack backtrace: [ 1294.935702] CPU: 4 PID: 6299 Comm: test-malloc-vra Not tainted 5.2.0-rc3+ #5 [ 1294.942786] Hardware name: ASUS X299-A/PRIME X299-A, BIOS 1401 05/21/2018 [ 1294.949590] Call Trace: [ 1294.952059] dump_stack+0x7c/0xc0 [ 1294.955469] ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.962213] print_unlock_imbalance_bug.cold.52+0xca/0xcf [ 1294.967641] lock_release+0x306/0x380 [ 1294.971383] ? nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1294.978089] ? lock_downgrade+0x2d0/0x2d0 [ 1294.982121] ? find_held_lock+0xac/0xd0 [ 1294.985979] __mutex_unlock_slowpath+0x8f/0x3f0 [ 1294.990540] ? wait_for_completion+0x230/0x230 [ 1294.995002] ? rwlock_bug.part.2+0x60/0x60 [ 1294.999197] nouveau_dmem_migrate_alloc_and_copy+0x79f/0xbf0 [nouveau] [ 1295.005751] ? page_mapping+0x98/0x110 [ 1295.009511] migrate_vma+0xa74/0x1090 [ 1295.013186] ? move_to_new_page+0x480/0x480 [ 1295.017400] ? __kmalloc+0x153/0x300 [ 1295.021052] ? nouveau_dmem_migrate_vma+0xd8/0x1e0 [nouveau] [ 1295.026796] nouveau_dmem_migrate_vma+0x157/0x1e0 [nouveau] [ 1295.032466] ? nouveau_dmem_init+0x490/0x490 [nouveau] [ 1295.037612] ? vmacache_find+0xc2/0x110 [ 1295.041537] nouveau_svmm_bind+0x1b4/0x210 [nouveau] [ 1295.046583] ? nouveau_svm_fault+0x13e0/0x13e0 [nouveau] [ 1295.051912] drm_ioctl_kernel+0x14d/0x1a0 [ 1295.055930] ? drm_setversion+0x330/0x330 [ 1295.059971] drm_ioctl+0x308/0x530 [ 1295.063384] ? drm_version+0x150/0x150 [ 1295.067153] ? find_held_lock+0xac/0xd0 [ 1295.070996] ? __pm_runtime_resume+0x3f/0xa0 [ 1295.075285] ? mark_held_locks+0x29/0xa0 [ 1295.079230] ? _raw_spin_unlock_irqrestore+0x3c/0x50 [ 1295.084232] ? lockdep_hardirqs_on+0x17d/0x250 [ 1295.088768] nouveau_drm_ioctl+0x9a/0x100 [nouveau] [ 1295.093661] do_vfs_ioctl+0x137/0x9a0 [ 1295.097341] ? ioctl_preallocate+0x140/0x140 [ 1295.101623] ? match_held_lock+0x1b/0x230 [ 1295.105646] ? match_held_lock+0x1b/0x230 [ 1295.109660] ? find_held_lock+0xac/0xd0 [ 1295.113512] ? __do_page_fault+0x324/0x630 [ 1295.117617] ? lock_downgrade+0x2d0/0x2d0 [ 1295.121648] ? mark_held_locks+0x79/0xa0 [ 1295.125583] ? handle_mm_fault+0x352/0x430 [ 1295.129687] ksys_ioctl+0x60/0x90 [ 1295.133020] ? mark_held_locks+0x29/0xa0 [ 1295.136964] __x64_sys_ioctl+0x3d/0x50 [ 1295.140726] do_syscall_64+0x68/0x250 [ 1295.144400] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 1295.149465] RIP: 0033:0x7f1a3495809b [ 1295.153053] Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 [ 1295.171850] RSP: 002b:00007ffef7ed1358 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 1295.179451] RAX: ffffffffffffffda RBX: 00007ffef7ed1628 RCX: 00007f1a3495809b [ 1295.186601] RDX: 00007ffef7ed13b0 RSI: 0000000040406449 RDI: 0000000000000004 [ 1295.193759] RBP: 00007ffef7ed13b0 R08: 0000000000000000 R09: 000000000157e770 [ 1295.200917] R10: 000000000151c010 R11: 0000000000000246 R12: 0000000040406449 [ 1295.208083] R13: 0000000000000004 R14: 0000000000000000 R15: 0000000000000000 Reacquire the lock before continuing to the next page. Signed-off-by: Ralph Campbell <rcampbell@nvidia.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau/hwmon: return EINVAL if the GPU is powered down for sensors readsKarol Herbst
fixes bogus values userspace gets from hwmon while the GPU is powered down Signed-off-by: Karol Herbst <kherbst@redhat.com> Reviewed-by: Rhys Kidd <rhyskidd@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau: fix bogus GPL-2 license headerBen Skeggs
The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files were simply missing the boiler plate and got caught up in the global update. Fixes: 96ac6d4351004 (treewide: Add SPDX license identifier - Kbuild) Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-07-19drm/nouveau: fix bogus GPL-2 license headerIlia Mirkin
The bulk SPDX addition made all these files into GPL-2.0 licensed files. However the remainder of the project is MIT-licensed, these files (primarily header files) were simply missing the boiler plate and got caught up in the global update. Fixes: b24413180f5 (License cleanup: add SPDX GPL-2.0 license identif