summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2019-03-25drm/udl: Refactor edid retrieving in UDL driver (v2)Robert Tarasov
Now drm/udl driver uses drm_do_get_edid() function to retrieve and validate all blocks of EDID data. Old approach had insufficient validation routine and had problems with retrieving of extra blocks Signed-off-by: Robert Tarasov <tutankhamen@chromium.org> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com> [airlied: Fix spelling mistakes] Link: https://patchwork.freedesktop.org/patch/msgid/20190314225339.162386-1-tutankhamen@chromium.org
2019-03-25drm: Fix drm_release() and device unplugNoralf Trønnes
If userspace has open fd(s) when drm_dev_unplug() is run, it will result in drm_dev_unregister() being called twice. First in drm_dev_unplug() and then later in drm_release() through the call to drm_put_dev(). Since userspace already holds a ref on drm_device through the drm_minor, it's not necessary to add extra ref counting based on no open file handles. Instead just drm_dev_put() unconditionally in drm_dev_unplug(). We now have this: - Userpace holds a ref on drm_device as long as there's open fd(s) - The driver holds a ref on drm_device as long as it's bound to the struct device When both sides are done with drm_device, it is released. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190208140103.28919-2-noralf@tronnes.org
2019-03-25Merge tag 'drm/tegra/for-5.1-rc2' of ↵Dave Airlie
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v5.1-rc2 These are a couple of minor fixes for build issues and sparse warnings. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thierry Reding <thierry.reding@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190322131517.825-1-thierry.reding@gmail.com
2019-03-25drm/fb: avoid setting 0 depth.Dave Airlie
If the downscaling fails and we end up with a best_depth of 0, then ignore it. This actually works around a cascade of failure, but it the simplest fix for now. The scaling patch broke the udl driver, as the udl driver doesn't expose planes at all, so gets the two default 32-bit formats, but the udl driver then ask for 16bpp fbdev, and the scaling code falls over. This fixes the udl driver since the scaled depth support was added. Fixes: f4bd542bcaee ("drm/fb-helper: Scale back depth to supported maximum") Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190315014621.21816-2-airlied@gmail.com
2019-03-24Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A set of small fixes plus the removal of stale board support code: - Remove the board support code from the clpx711x clocksource driver. This change had fallen through the cracks and I'm sending it now rather than dealing with people who want to improve that stale code for 3 month. - Use the proper clocksource mask on RICSV - Make local scope functions and variables static" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/clps711x: Remove board support clocksource/drivers/riscv: Fix clocksource mask clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static clocksource/drivers/clps711x: Make clps711x_clksrc_init() static time/jiffies: Make refined_jiffies static
2019-03-24Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Remove secondary GIC support on systems w/o device-tree support - A set of small fixlets in various irqchip drivers - static and fall-through annotations - Kernel doc and typo fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Mark expected switch case fall-through genirq/devres: Remove excess parameter from kernel doc irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static irqchip/mbigen: Don't clear eventid when freeing an MSI irqchip/stm32: Don't set rising configuration registers at init irqchip/stm32: Don't clear rising/falling config registers at init dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support irqchip/mmp: Make mmp_irq_domain_ops static irqchip/brcmstb-l2: Make two init functions static genirq: Fix typo in comment of IRQD_MOVE_PCNTXT irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp irqchip/gic: Drop support for secondary GIC in non-DT systems irqchip/imx-irqsteer: Fix of_property_read_u32() error handling
2019-03-24Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: - Fix a wrong __percpu structure declaration in intel_powerclamp driver (Luc Van Oostenryck) - Fix truncated name of the idle injection kthreads created by intel_powerclamp driver (Zhang Rui) - Fix the missing UUID supports in int3400 thermal driver (Matthew Garrett) - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver (Phil Elwell) - A couple of trivial fixes/cleanups in some SoC thermal drivers * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal/intel_powerclamp: fix truncated kthread name thermal: mtk: Allocate enough space for mtk_thermal. thermal/int340x_thermal: fix mode setting thermal/int340x_thermal: Add additional UUIDs thermal: cpu_cooling: Remove unused cur_freq variable thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs thermal: samsung: Fix incorrect check after code merge thermal/intel_powerclamp: fix __percpu declaration of worker_data
2019-03-24Merge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linuxLinus Torvalds
Pull auxdisplay updates from Miguel Ojeda: "A few fixes and improvements for auxdisplay: - Series to fix a memory leak in hd44780 while introducing charlcd_free(). From Andy Shevchenko - Series to clean up the Kconfig menus and a couple of improvements for charlcd. From Mans Rullgard" * tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux: auxdisplay: charlcd: make backlight initial state configurable auxdisplay: charlcd: simplify init message display auxdisplay: deconfuse configuration auxdisplay: hd44780: Convert to use charlcd_free() auxdisplay: panel: Convert to use charlcd_free() auxdisplay: charlcd: Introduce charlcd_free() helper auxdisplay: charlcd: Move to_priv() to charlcd namespace auxdisplay: hd44780: Fix memory leak on ->remove()
2019-03-24Merge tag 'scsi-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Six fixes to four drivers and two core fixes. One core fix simply corrects a missed destroy_rcu_head() but the other is hopefully the end of an ongoing effort to make suspend/resume play nicely with scsi quiesce" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ibmvscsi: Fix empty event pool access during host removal scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset() scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID scsi: qla2xxx: Fix FC-AL connection target discovery scsi: core: Avoid that a kernel warning appears during system resume scsi: core: Also call destroy_rcu_head() for passthrough requests scsi: iscsi: flush running unbind operations when removing a session
2019-03-24clocksource/drivers/clps711x: Remove board supportAlexander Shiyan
Since board support for the CLPS711X platform was removed, remove the board support from the clps711x-timer driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru
2019-03-23r8169: fix cable re-plugging issueHeiner Kallweit
Bartek reported that after few cable unplug/replug cycles suddenly replug isn't detected any longer. His system uses a RTL8106, I wasn't able to reproduce the issue with RTL8168g. According to his bisect the referenced commit caused the regression. As Realtek doesn't release datasheets or errata it's hard to say what's the actual root cause, but this change was reported to fix the issue. Fixes: 38caff5a445b ("r8169: handle all interrupt events in the hard irq handler") Reported-by: Bartosz Skrzypczak <barteks2x@gmail.com> Suggested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Tested-by: Bartosz Skrzypczak <barteks2x@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: ethernet: ti: fix possible object reference leakWen Yang
The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: ibm: fix possible object reference leakWen Yang
The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Douglas Miller <dougmill@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: xilinx: fix possible object reference leakWen Yang
The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Anirudha Sarangi <anirudh@xilinx.com> Cc: John Linn <John.Linn@xilinx.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Michal Simek <michal.simek@xilinx.com> Cc: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23net: phy: Re-parent menus for MDIO bus drivers correctlyFlorian Fainelli
After 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") the various MDIO bus drivers were no longer parented with config PHYLIB but with config MDIO_BUS which is not a menuconfig, fix this by depending on MDIO_DEVICE which is a menuconfig. This is visually nicer and less confusing for users. Fixes: 90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-23Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: "A set of fixes/changes that should go into this series. This contains: - Kernel doc / comment updates (Bart, Shenghui) - Un-export of core-only used function (Bart) - Fix race on loop file access (Dongli) - pf/pcd queue cleanup fixes (me) - Use appropriate helper for RESTART bit set (Yufen) - Use named identifier for classic poll (Yufen)" * tag 'for-linus-20190323' of git://git.kernel.dk/linux-block: sbitmap: trivial - update comment for sbitmap_deferred_clear_bit blkcg: Fix kernel-doc warnings blk-iolatency: #include "blk.h" block: Unexport blk_mq_add_to_requeue_list() block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx loop: access lo_backing_file only when the loop device is Lo_bound blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART paride/pcd: cleanup queues when detection fails paride/pf: cleanup queues when detection fails
2019-03-23Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph fixes from Ilya Dryomov: "A follow up for the new alloc_size logic and a blacklisting fix, marked for stable" * tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client: rbd: drop wait_for_latest_osdmap() libceph: wait for latest osdmap in ceph_monc_blacklist_add() rbd: set io_min, io_opt and discard_granularity to alloc_size
2019-03-23clocksource/drivers/riscv: Fix clocksource maskAtish Patra
For all riscv architectures (RV32, RV64 and RV128), the clocksource is a 64 bit incrementing counter. Fix the clock source mask accordingly. Tested on both 64bit and 32 bit virt machine in QEMU. Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver") Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anup Patel <anup@brainfault.org> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: linux-riscv@lists.infradead.org Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Anup Patel <Anup.Patel@wdc.com> Cc: Damien Le Moal <Damien.LeMoal@wdc.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com
2019-03-22clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction staticYueHaibing
Fix sparse warning: drivers/clocksource/mips-gic-timer.c:70:18: warning: symbol 'gic_compare_irqaction' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() staticYueHaibing
Fix sparse warning: drivers/clocksource/timer-ti-dm.c:589:5: warning: symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() staticYueHaibing
Fix sparse warnings: drivers/clocksource/tcb_clksrc.c:74:6: warning: symbol 'tc_clksrc_suspend' was not declared. Should it be static? drivers/clocksource/tcb_clksrc.c:89:6: warning: symbol 'tc_clksrc_resume' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <nicolas.ferre@microchip.com> Cc: <daniel.lezcano@linaro.org> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com
2019-03-22clocksource/drivers/clps711x: Make clps711x_clksrc_init() staticYueHaibing
Fix sparse warning: drivers/clocksource/clps711x-timer.c:96:13: warning: symbol 'clps711x_clksrc_init' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: <daniel.lezcano@linaro.org> Cc: <shc_work@mail.ru> Cc: <linux-arm-kernel@lists.infradead.org> Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com
2019-03-22Merge tag 'iommu-fixes-v5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE - Fix for IOVA code to trigger the slow-path less often - Two fixes for Intel VT-d to avoid writing to read-only registers and to flush the right domain id for the default domains in scalable mode * tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Save the right domain ID used by hardware iommu/vt-d: Check capability before disabling protected memory iommu/iova: Fix tracking of recently failed iova address iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE
2019-03-22Merge tag 'devprop-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework fix from Rafael Wysocki: "Add missing 'static' in two places (YueHaibing)" * tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: drivers: base: swnode: Make two functions static
2019-03-22Merge tag 'acpi-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent device references acquired by bus_find_device() in acpi_dev_present() from being leaked (Andy Shevchenko)" * tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / utils: Drop reference in test for device presence
2019-03-22Merge tag 'pm-5.1-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These rearrange some code in the generic power domains (genpd) framework to avoid a potential deadlock and make the turbostat utility behave more as expected. Specifics: - Rearrange the generic power domains (genpd) code to avoid a potential deadlock possible due to its interactions with the clock framework (Jiada Wang) - Make turbostat return the exit status of the command run under it if that command fails (David Arcari)" * tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Domains: Avoid a potential deadlock tools/power turbostat: return the exit status of a command
2019-03-22Merge tag 'mmc-v5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "A couple of MMC host fixes intended for v5.1: - alcor: Fix DMA reads - renesas_sdhi: Limit block count to 16-bit for old revisions - sdhci-omap: Fixup support for read-only pins - mxcmmc: Revert support for highmem pages - davinci/pxamci: Fix clang build warnings" * tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: limit block count to 16 bit for old revisions mmc: alcor: fix DMA reads mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages" mmc: davinci: remove extraneous __init annotation mmc: pxamci: fix enum type confusion
2019-03-22xhci: Don't let USB3 ports stuck in polling state prevent suspendMathias Nyman
Commit 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") was intended to prevent ports that were still link training from being forced to U3 suspend state mid enumeration. This solved enumeration issues for devices with slow link training. Turns out some devices are stuck in the link training/polling state, and thus that patch will prevent suspend completely for these devices. This is seen with USB3 card readers in some MacBooks. Instead of preventing suspend, give some time to complete the link training. On successful training the port will end up as connected and enabled. If port instead is stuck in link training the bus suspend will continue suspending after 360ms (10 * 36ms) timeout (tPollingLFPSTimeout). Original patch was sent to stable, this one should go there as well Fixes: 2f31a67f01a8 ("usb: xhci: Prevent bus suspend if a port connect change or polling state is detected") Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22usb: xhci: dbc: Don't free all memory with spinlock heldMathias Nyman
The xhci debug capability (DbC) feature did its memory cleanup with spinlock held. dma_free_coherent() warns if called with interrupts disabled move the memory cleanup outside the spinlock Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22xhci: Fix port resume done detection for SS ports with LPM enabledMathias Nyman
A suspended SS port in U3 link state will go to U0 when resumed, but can almost immediately after that enter U1 or U2 link power save states before host controller driver reads the port status. Host controller driver only checks for U0 state, and might miss the finished resume, leaving flags unclear and skip notifying usb code of the wake. Add U1 and U2 to the possible link states when checking for finished port resume. Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22gpio: adnp: Fix testing wrong value in adnp_gpio_direction_inputAxel Lin
Current code test wrong value so it does not verify if the written data is correctly read back. Fix it. Also make it return -EPERM if read value does not match written bit, just like it done for adnp_gpio_direction_output(). Fixes: 5e969a401a01 ("gpio: Add Avionic Design N-bit GPIO expander support") Cc: <stable@vger.kernel.org> Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-22gpio: exar: add a check for the return value of ida_simple_get failsKangjie Lu
ida_simple_get may fail and return a negative error number. The fix checks its return value; if it fails, go to err_destroy. Cc: <stable@vger.kernel.org> Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-22r8169: don't read interrupt mask register in interrupt handlerHeiner Kallweit
After the original patch network starts to crash on heavy load. It's not fully clear why this additional register read has such side effects, but removing it fixes the issue. Thanks also to Alex for his contribution and hints. [0] https://marc.info/?t=155268170400002&r=1&w=2 Fixes: e782410ed237 ("r8169: improve spurious interrupt detection") Reported-by: VDR User <user.vdr@gmail.com> Tested-by: VDR User <user.vdr@gmail.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-22drm/tegra: vic: Fix implicit function declaration warningAnders Roxell
When CONFIG_IOMMU_API isn't set the following warnings pops up: drivers/gpu/drm/tegra/vic.c: In function ‘vic_boot’: drivers/gpu/drm/tegra/vic.c:110:31: error: implicit declaration of function ‘dev_iommu_fwspec_get’; did you mean ‘iommu_fwspec_free’? [-Werror=implicit-function-declaration] struct iommu_fwspec *spec = dev_iommu_fwspec_get(vic->dev); ^~~~~~~~~~~~~~~~~~~~ iommu_fwspec_free drivers/gpu/drm/tegra/vic.c:110:31: warning: initialization of ‘struct iommu_fwspec *’ from ‘int’ makes pointer from integer without a cast [-Wint-conversion] drivers/gpu/drm/tegra/vic.c:117:19: error: ‘struct iommu_fwspec’ has no member named ‘num_ids’ if (spec && spec->num_ids > 0) { ^~ drivers/gpu/drm/tegra/vic.c:118:16: error: ‘struct iommu_fwspec’ has no member named ‘ids’ value = spec->ids[0] & 0xffff; ^~ Rework so that its inside a '#ifdef CONFIG_IOMMU_API' block. Fixes: f3779cb190a5 ("drm/tegra: vic: Support stream ID register programming") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-22drm/tegra: hub: Fix dereference before checkThierry Reding
Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2019-03-22iommu/vt-d: Save the right domain ID used by hardwareLu Baolu
The driver sets a default domain id (FLPT_DEFAULT_DID) in the first level only pasid entry, but saves a different domain id in @sdev->did. The value saved in @sdev->did will be used to invalidate the translation caches. Hence, the driver might result in invalidating the caches with a wrong domain id. Cc: Ashok Raj <ashok.raj@intel.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode") Signed-off-by: Liu Yi L <yi.l.liu@intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-22iommu/vt-d: Check capability before disabling protected memoryLu Baolu
The spec states in 10.4.16 that the Protected Memory Enable Register should be treated as read-only for implementations not supporting protected memory regions (PLMR and PHMR fields reported as Clear in the Capability register). Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: mark gross <mgross@intel.com> Suggested-by: Ashok Raj <ashok.raj@intel.com> Fixes: f8bab73515ca5 ("intel-iommu: PMEN support") Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-22iommu/iova: Fix tracking of recently failed iova addressRobert Richter
If a 32 bit allocation request is too big to possibly succeed, it early exits with a failure and then should never update max32_alloc_ size. This patch fixes current code, now the size is only updated if the slow path failed while walking the tree. Without the fix the allocation may enter the slow path again even if there was a failure before of a request with the same or a smaller size. Cc: <stable@vger.kernel.org> # 4.20+ Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range") Reviewed-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Robert Richter <rrichter@marvell.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2019-03-21Merge tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "i915, amdgpu, vmwgfx, exynos, nouveau and udl fixes. Seems to be lots of little minor ones for regressions in rc1, and some cleanups. The exynos one is the largest one, and is for a hw difference between exynos versions" * tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/dmem: empty chunk do not have a buffer object associated with them. drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure drm/nouveau/dmem: Fix a NULL vs IS_ERR() check drm/nouveau/dmem: remove set but not used variable 'drm' drm/exynos/mixer: fix MIXER shadow registry synchronisation code drm/vmwgfx: Don't double-free the mode stored in par->set_mode drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's drm/amdgpu: fix invalid use of change_bit drm/amdgpu: revert "cleanup setting bulk_movable" drm/i915: Sanity check mmap length against object size drm/i915: Fix off-by-one in reporting hanging process drm/i915/bios: assume eDP is present on port A when there is no VBT drm/udl: use drm_gem_object_put_unlocked.
2019-03-22Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes - Parially revert a bulk move clean up change to fix a ref count bug - Fix invalid use of change_bit that caused a crash on PPC64 and ARM64 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321020933.3508-1-alexander.deucher@amd.com
2019-03-22Merge branch 'vmwgfx-fixes-5.1' of ↵Dave Airlie
git://people.freedesktop.org/~thomash/linux into drm-fixes Two fixes CC'd stable. One fix for a long-standing a bit hard-to-trigger fbdev modesetting bug and one out-of-bo-id fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190321112026.114328-1-thellstrom@vmware.com
2019-03-22Merge tag 'exynos-drm-fixes-for-5.1-rc2' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes - Fix page fault issue at Mixer device . This patch fixes the page fault issue by correcting sychronization method for updating shadow registers for Mixer device. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553162223-10090-1-git-send-email-inki.dae@samsung.com
2019-03-22Merge tag 'drm-intel-fixes-2019-03-20' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes A protection on our mmap against attempts to map past the end of the object; plus a fix off-by-one in our hang report and a protection; and a fix for eDP panels on Gen9 platforms on VBT absence. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190320201451.GA7993@intel.com
2019-03-22Merge branch 'linux-5.1' of git://github.com/skeggsb/linux into drm-fixesDave Airlie
Some minor nouveau dmem and other fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==kMkD6n-cS9KpQBcTU1E8p7Wc+H1ZuOhSfD7yTFJVvkw@mail.gmail.com
2019-03-22drm/nouveau/dmem: empty chunk do not have a buffer object associated with them.Jérôme Glisse
Empty chunk do not have a bo associated with them so no need to pin/unpin on suspend/resume. This fix suspend/resume on 5.1rc1 when NOUVEAU_SVM is enabled. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-22drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failureYueHaibing
pm_runtime_get_sync returns negative on failure. Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-22drm/nouveau/dmem: Fix a NULL vs IS_ERR() checkDan Carpenter
The hmm_devmem_add() function doesn't return NULL, it returns error pointers. Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-22drm/nouveau/dmem: remove set but not used variable 'drm'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free': drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning: variable 'drm' set but not used [-Wunused-but-set-variable] struct nouveau_drm *drm; ^ Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2019-03-21net: hns3: fix for not calculating tx bd num correctlyYunsheng Lin
When there is only one byte in a frag, the current calculation using "(size + HNS3_MAX_BD_SIZE - 1) >> HNS3_MAX_BD_SIZE_OFFSET" will return zero, because HNS3_MAX_BD_SIZE is 65535 and HNS3_MAX_BD_SIZE_OFFSET is 16. So it will cause tx error when a frag's size is one byte. This patch fixes it by using DIV_ROUND_UP. Fixes: 3fe13ed95dd3 ("net: hns3: avoid mult + div op in critical data path") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-21net: macb: Add null check for PCLK and HCLKHarini Katakam
Both PCLK and HCLK are "required" clocks according to macb devicetree documentation. There is a chance that devm_clk_get doesn't return a negative error but just a NULL clock structure instead. In such a case the driver proceeds as usual and uses pclk value 0 to calculate MDC divisor which is incorrect. Hence fix the same in clock initialization. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 12:42:38 +0000