summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2019-09-01net: dsa: mv88e6xxx: centralize SERDES IRQ handlingVivien Didelot
The .serdes_irq_setup are all following the same steps: get the SERDES lane, get the IRQ mapping, request the IRQ, then enable it. So do the .serdes_irq_free implementations: get the SERDES lane, disable the IRQ, then free it. This patch removes these operations in favor of generic functions. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_statusVivien Didelot
Introduce a new .serdes_irq_status operation to prepare the abstraction of IRQ thread from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_enableVivien Didelot
Introduce a new .serdes_irq_enable operation to prepare the abstraction of IRQ enabling from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: pass lane to .serdes_powerVivien Didelot
Now the first step of all .serdes_power implementations is getting the lane mapping. Since we have an operation for that, call it in the wrapper and pass the lane down to the .serdes_power operation. This also allows to avoid querying the SERDES lane twice in mv88e6xxx_port_set_cmode. At the same time provide mv88e6xxx_serdes_power_{up,down} helpers and prefer up/down instead of on/off as in the documentation. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: merge mv88e6352_serdes_power_setVivien Didelot
The mv88e6352_serdes_power_set helper is only used at one place, in mv88e6352_serdes_power. Keep it simple and merge the two functions together. Use mv88e6xxx_serdes_get_lane instead of mv88e6352_port_has_serdes to avoid moving code. No functional changes. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: implement mv88e6352_serdes_get_laneVivien Didelot
Even though 88E6352 has no dedicated lane for SERDES interfaces, it uses a similar code as the other .serdes_get_lane implementations to check the port's CMODE and ensure that SERDES operations are doable. For consistency, implement mv88e6352_serdes_get_lane for the 88E6352 and similar switches which simply returns an unused 0xff lane address. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: simplify .serdes_get_laneVivien Didelot
Because the mapping between a SERDES interface and its lane is static, we don't need to stick with negative error codes actually and we can simply return 0 if there is no lane, just like the IRQ mapping. This way we can keep a simple and intuitive API using unsigned lane numbers while simplifying the implementations with single return statements. Last but not least, fix the reverse chrismas tree in mv88e6390x_serdes_get_lane. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: introduce .serdes_irq_mappingVivien Didelot
Introduce a new .serdes_irq_mapping operation to prepare the abstraction of IRQ mapping from the SERDES IRQ setup code. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: fix SERDES IRQ mappingVivien Didelot
The current mv88e6xxx SERDES code checks for negative error code from irq_find_mapping, while this function returns an unsigned integer. This patch removes this dead code and simply returns 0 is no IRQ is found. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: dsa: mv88e6xxx: check errors in mv88e6352_serdes_irq_linkVivien Didelot
The mv88e6352_serdes_irq_link helper is not checking for any error that may occur during hardware accesses. Worst, the "up" boolean is set from the potentially unused "status" variable, if read operations failed. As done in mv88e6390_serdes_irq_link_sgmii, return right away and do not call dsa_port_phylink_mac_change if an error occurred. Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: hns3: remove set but not used variable 'qos'YueHaibing
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c: In function 'hclge_restore_vlan_table': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8016:18: warning: variable 'qos' set but not used [-Wunused-but-set-variable] Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 70a214903da9 ("net: hns3: reduce the parameters of some functions") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01net: hns3: remove redundant assignment to pointer reg_infoColin Ian King
Pointer reg_info is being initialized with a value that is never read and is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-01r8169: don't set bit RxVlan on RTL8125Heiner Kallweit
RTL8125 uses a different register for VLAN offloading config, therefore don't set bit RxVlan. Fixes: f1bce4ad2f1c ("r8169: add support for RTL8125") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qede: Add support for dumping the grc data.Sudarsana Reddy Kalluru
This patch adds driver support for configuring grc dump config flags, and dumping the grc data via ethtool get/set-dump interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qed: Add APIs for configuring grc dump config flags.Sudarsana Reddy Kalluru
The patch adds driver support for configuring the grc dump config flags. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qede: Add support for reading the config id attributes.Sudarsana Reddy Kalluru
Add driver support for dumping the config id attributes via ethtool dump interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qed: Add APIs for reading config id attributes.Sudarsana Reddy Kalluru
The patch adds driver support for reading the config id attributes from NVM flash partition. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net/mlx5e: Remove unlikely() from WARN*() conditionDenis Efremov
"unlikely(WARN_ON_ONCE(x))" is excessive. WARN_ON_ONCE() already uses unlikely() internally. Signed-off-by: Denis Efremov <efremov@linux.com> Cc: Boris Pismenny <borisp@mellanox.com> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: netdev@vger.kernel.org Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Fix compile error regression with CONFIG_BNXT_SRIOV not set.Michael Chan
Add a new function bnxt_get_registered_vfs() to handle the work of getting the number of registered VFs under #ifdef CONFIG_BNXT_SRIOV. The main code will call this function and will always work correctly whether CONFIG_BNXT_SRIOV is set or not. Fixes: 230d1f0de754 ("bnxt_en: Handle firmware reset.") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net/mlx5e: Move local var definition into ifdef blockVlad Buslov
New local variable "struct flow_block_offload *f" was added to mlx5e_setup_tc() in recent rtnl lock removal patches. The variable is used in code that is only compiled when CONFIG_MLX5_ESWITCH is enabled. This results compilation warning about unused variable when CONFIG_MLX5_ESWITCH is not set. Move the variable definition into eswitch-specific code block from the beginning of mlx5e_setup_tc() function. Fixes: c9f14470d048 ("net: sched: add API for registering unlocked offload block callbacks") Reported-by: tanhuazhong <tanhuazhong@huawei.com> Signed-off-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: stmmac: depend on COMMON_CLKStephen Rothwell
Fixes: 190f73ab4c43 ("net: stmmac: setup higher frequency clk support for EHL & TGL") Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30arcnet: capmode: remove redundant assignment to pointer pktColin Ian King
Pointer pkt is being initialized with a value that is never read and pkt is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Ununsed value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add FW fatal devlink_health_reporter.Vasundhara Volam
Health show command example and output: $ devlink health show pci/0000:af:00.0 reporter fw_fatal pci/0000:af:00.0: name fw_fatal state healthy error 1 recover 1 grace_period 0 auto_recover true Fatal events from firmware or missing periodic heartbeats will be reported and recovery will be handled. We also turn on the support flags when we register with the firmware to enable this health and recovery feature in the firmware. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add bnxt_fw_exception() to handle fatal firmware errors.Michael Chan
This call will handle fatal firmware errors by forcing a reset on the firmware. The master function driver will carry out the forced reset. The sequence will go through the same bnxt_fw_reset_task() workqueue. This fatal reset differs from the non-fatal reset at the beginning stages. From the BNXT_FW_RESET_STATE_ENABLE_DEV state onwards where the firmware is coming out of reset, it is practically identical to the non-fatal reset. The next patch will add the periodic heartbeat check and the devlink reporter to report the fatal event and to initiate the bnxt_fw_exception() call. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add RESET_FW state logic to bnxt_fw_reset_task().Michael Chan
This state handles driver initiated chip reset during error recovery. Only the master function will perform this step during error recovery. The next patch will add code to initiate this reset from the master function. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Do not send firmware messages if firmware is in error state.Michael Chan
Add a flag to mark that the firmware has encountered fatal condition. The driver will not send any more firmware messages and will return error to the caller. Fix up some clean up functions to continue and not abort when the firmware message function returns error. This is preparation work to fully handle firmware error recovery under fatal conditions. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Retain user settings on a VF after RESET_NOTIFY event.Vasundhara Volam
Retain the VF MAC address, default VLAN, TX rate control, trust settings of VFs after firmware reset. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add devlink health reset reporter.Vasundhara Volam
Add devlink health reporter for the firmware reset event. Once we get the notification from firmware about the impending reset, the driver will report this to devlink and the call to bnxt_fw_reset() will be initiated to complete the reset sequence. Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Handle firmware reset.Michael Chan
Add the bnxt_fw_reset() main function to handle firmware reset. This is triggered by firmware to initiate an orderly reset, for example when a non-fatal exception condition has been detected. bnxt_fw_reset() will first wait for all VFs to shutdown and then start the bnxt_fw_reset_task() work queue to go through the sequence of reset, re-probe, and re-initialization. The next patch will add the devlink reporter to start the sequence and call bnxt_fw_reset(). Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Handle RESET_NOTIFY async event from firmware.Michael Chan
This event from firmware signals a coordinated reset initiated by the firmware. It may be triggered by some error conditions encountered in the firmware or other orderly reset conditions. We store the parameters from this event. Subsequent patches will add logic to handle reset itself using devlink reporters. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add new FW devlink_health_reporterVasundhara Volam
Create new FW devlink_health_reporter, to know the current health status of FW. Command example and output: $ devlink health show pci/0000:af:00.0 reporter fw pci/0000:af:00.0: name fw state healthy error 0 recover 0 FW status: Healthy; Reset count: 1 Cc: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Add BNXT_STATE_IN_FW_RESET state.Michael Chan
The new flag will be set in subsequent patches when firmware is going through reset. If bnxt_close() is called while the new flag is set, the FW reset sequence will have to be aborted because the NIC is prematurely closed before FW reset has completed. We also reject SRIOV configurations while FW reset is in progress. v2: No longer drop rtnl_lock() in close and wait for FW reset to complete. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Enable health monitoring.Michael Chan
Handle the async event from the firmware that enables firmware health monitoring. Store initial health metrics. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Pre-map the firmware health monitoring registers.Michael Chan
Pre-map the GRC registers for periodic firmware health monitoring. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Discover firmware error recovery capabilities.Michael Chan
Call the new firmware API HWRM_ERROR_RECOVERY_QCFG if it is supported to discover the firmware health and recovery capabilities and settings. This feature allows the driver to reset the chip if firmware crashes and becomes unresponsive. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Handle firmware reset status during IF_UP.Michael Chan
During IF_UP, newer firmware has a new status flag that indicates that firmware has reset. Add new function bnxt_fw_init_one() to re-probe the firmware and re-setup VF resources on the PF if necessary. If the re-probe fails, set a flag to prevent bnxt_open() from proceeding again. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Register buffers for VFs before reserving resources.Vasundhara Volam
When VFs need to be reconfigured dynamically after firmwware reset, the configuration sequence on the PF needs to be changed to register the VF buffers first. Otherwise, some VF firmware commands may not succeed as there may not be PF buffers ready for the re-directed firmware commands. This sequencing did not matter much before when we only supported the normal bring-up of VFs. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Refactor bnxt_sriov_enable().Michael Chan
Refactor the hardware/firmware configuration portion in bnxt_sriov_enable() into a new function bnxt_cfg_hw_sriov(). This new function can be called after a firmware reset to reconfigure the VFs previously enabled. v2: straight refactor of the code. Reordering done in the next patch. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Prepare bnxt_init_one() to be called multiple times.Michael Chan
In preparation for the new firmware reset feature, some of the logic in bnxt_init_one() and related functions will be called again after firmware has reset. Reset some of the flags and capabilities so that everything that can change can be re-initialized. Refactor some functions to probe firmware versions and capabilities. Check some buffers before allocating as they may have been allocated previously. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Suppress all error messages in hwrm_do_send_msg() in silent mode.Michael Chan
If the silent parameter is set, suppress all messages when there is no response from firmware. When polling for firmware to come out of reset, no response may be normal and we want to suppress the error messages. Also, don't poll for the firmware DMA response if Bus Master is disabled. This is in preparation for error recovery when firmware may be in error or reset state or Bus Master is disabled. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Simplify error checking in the SR-IOV message forwarding functions.Michael Chan
There are 4 functions handling message forwarding for SR-IOV. They check for non-zero firmware response code and then return -1. There is no need to do this anymore. The main messaging function will now return standard error code. Since we don't need to examine the response, we can use the hwrm_send_message() variant which will take the mutex automatically. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Convert error code in firmware message response to standard code.Michael Chan
The main firmware messaging function returns the firmware defined error code and many callers have to convert to standard error code for proper propagation to userspace. Convert bnxt_hwrm_do_send_msg() to return standard error code so we can do away with all the special error code handling by the many callers. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Remove the -1 error return code from bnxt_hwrm_do_send_msg().Michael Chan
Replace the non-standard -1 code with -EBUSY when there is no firmware response after waiting for the maximum timeout. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30bnxt_en: Use a common function to print the same ethtool -f error message.Michael Chan
The same message is printed 3 times in the code, so use a common function to do that. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: sgi: ioc3-eth: no need to stop queue set_multicast_listThomas Bogendoerfer
netif_stop_queue()/netif_wake_qeue() aren't needed for changing multicast filters. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: sgi: ioc3-eth: protect emcr in all casesThomas Bogendoerfer
emcr in private struct wasn't always protected by spinlock. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: sgi: ioc3-eth: Fix IPG settingsThomas Bogendoerfer
The half/full duplex settings for inter packet gap counters/timer were reversed. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: sgi: ioc3-eth: use csum_foldThomas Bogendoerfer
replace open coded checksum folding by csum_fold. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: sgi: ioc3-eth: use dma-direct for dma allocationsThomas Bogendoerfer
Replace the homegrown DMA memory allocation, which only works on SGI-IP27 machines, with the generic dma allocations. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-30net: sgi: ioc3-eth: refactor rx buffer allocationThomas Bogendoerfer
Move common code for rx buffer setup into ioc3_alloc_skb and deal with allocation failures. Also clean up allocation size calculation. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-19 05:34:56 +0000