Age | Commit message (Collapse) | Author |
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
kern_buf is not iomem; it comes from kmalloc and is directly
dereferenced.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
unsigned int is what struct kparam_array internally uses.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
The cookie passed to request_irq isn't the same as the one passed
to free_irq, which results in the following warning:
[ 63.243533] WARNING: at kernel/irq/manage.c:899 __free_irq+0x9b/0x17d()
[ 63.243533] Hardware name:
[ 63.243533] Trying to free already-free IRQ 17
[ 63.243533] Modules linked in: vme_tsi148(-) vme e1000e iTCO_wdt iTCO_vendor_support [last unloaded: scsi_wait_scan]
[ 63.243533] Pid: 2013, comm: rmmod Not tainted 2.6.35 #2
[ 63.243533] Call Trace:
[ 63.243533] [<ffffffff81036ea3>] warn_slowpath_common+0x80/0x98
[ 63.243533] [<ffffffff81036f4f>] warn_slowpath_fmt+0x41/0x43
[ 63.243533] [<ffffffff810678c4>] __free_irq+0x9b/0x17d
[ 63.243533] [<ffffffff810679d9>] free_irq+0x33/0x4e
[ 63.243533] [<ffffffffa004a897>] tsi148_irq_exit+0x6b/0x70 [vme_tsi148]
[...]
[ 63.243533] ---[ end trace bbf92311d969efb4 ]---
Fix it by passing the same cookie to both functions.
Signed-off-by: Emilio G. Cota <cota@braap.org>
[martyn.welch@ge.com: modified to remove checkpatch warnings]
Signed-off-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
tsi148_irq_exit is called twice in .remove, which causes an oops.
Remove the second call, which apart from being redundant cannot
possibly work; the CR/CSR space has been already unmapped.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This fixes an oops when removing the module.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
When init_module fails, 0 is returned anyway; the module is then installed
and oopses when we try to remove it:
[ 3236.368009] WARNING: at drivers/base/driver.c:262 driver_unregister+0x36/0x6f()
[ 3236.368012] Hardware name:
[ 3236.368014] Unexpected driver unregister!
[ 3236.368016] Modules linked in: vme_user(-) vme_tsi148 vme e1000e iTCO_wdt iTCO_vendor_support [last unloaded: vme]
[ 3236.368027] Pid: 16162, comm: rmmod Not tainted 2.6.35 #2
[ 3236.368029] Call Trace:
[ 3236.368037] [<ffffffff81036ea3>] warn_slowpath_common+0x80/0x98
[ 3236.368044] [<ffffffff81060a65>] ? __try_stop_module+0x0/0x58
[ 3236.368049] [<ffffffff81036f4f>] warn_slowpath_fmt+0x41/0x43
[ 3236.368054] [<ffffffff81060a65>] ? __try_stop_module+0x0/0x58
[ 3236.368059] [<ffffffff811e8f78>] driver_unregister+0x36/0x6f
[ 3236.368066] [<ffffffffa004aa44>] vme_unregister_driver+0xd/0xf [vme]
[ 3236.368072] [<ffffffffa00616c8>] vme_user_exit+0x10/0x1e [vme_user]
[ 3236.368076] [<ffffffff810612c1>] sys_delete_module+0x1ba/0x226
[ 3236.368082] [<ffffffff812d6e14>] ? do_page_fault+0x25d/0x28a
[ 3236.368088] [<ffffffff8100202b>] system_call_fastpath+0x16/0x1b
[ 3236.368092] ---[ end trace cab6d88ebc44c1de ]---
The appended fixes it by returning the appropriate error code in module_init
whenever something goes wrong, thus cancelling the insertion of the module.
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
done with
find . -name '*.c' | xargs perl -p -i -e 's/&\(([^()]+)\)/&$1/g'
Signed-off-by: Emilio G. Cota <cota@braap.org>
Acked-by: Martyn Welch <martyn.welch@ge.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
While doing a ktest.pl I used a MIN_CONFIG that had STAGING enabled, and
a randconfig with CONFIG_DEBUG_STRICT_USER_COPY_CHECKS enabled caught
the following bug:
In file included from /home/rostedt/work/autotest/nobackup/linux-test.git/arch/x86/include/asm/uaccess.h:571:0,
from /home/rostedt/work/autotest/nobackup/linux-test.git/include/linux/poll.h:14,
from /home/rostedt/work/autotest/nobackup/linux-test.git/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c:32:
In function 'copy_from_user',
inlined from 'ft1000_ChIoctl' at /home/rostedt/work/autotest/nobackup/linux-test.git/drivers/staging/ft1000/ft1000-usb/ft1000_chdev.c:702:36:
/home/rostedt/work/autotest/nobackup/linux-test.git/arch/x86/include/asm/uaccess_32.h:212:26: error: call to 'copy_from_user_overflow' declared with attribute error: copy_from_user() buffer size is not provably correct
Looking at the code it was obvious what the problem was. The pointer
dpram_data was being allocated but the address was being written to.
Looking at the comment above the code shows that it use to write into an
element of that pointer where the '&' is appropriate. But now that it
writes to the pointer itself, we need to remove the '&' otherwise we
write over the pointer and not into the data it points to.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
With commit 2dab1ac81b4767095f96503a9ac093a68c6e9c95 there
was intruduced error which lead to stopping uninitialized
kthread which leads to kernel panics.
This patch fix problems with common entry point in correct
way.
Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
This was necessary in order to resolve some conflicts that happened
between -rc1 and -rc2 with the following files:
drivers/staging/bcm/Bcmchar.c
drivers/staging/intel_sst/intel_sst_app_interface.c
All should be resolved now.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
hwmon: (w83795) Check for BEEP pin availability
hwmon: (w83795) Clear intrusion alarm immediately
hwmon: (w83795) Read the intrusion state properly
hwmon: (w83795) Print the actual temperature channels as sources
hwmon: (w83795) List all usable temperature sources
hwmon: (w83795) Expose fan control method
hwmon: (w83795) Fix fan control mode attributes
hwmon: (lm95241) Check validity of input values
hwmon: Change mail address of Hans J. Koch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging
* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
i2c: Sanity checks on adapter registration
i2c: Mark i2c_adapter.id as deprecated
i2c: Drivers shouldn't include <linux/i2c-id.h>
i2c: Delete unused adapter IDs
i2c: Remove obsolete cleanup for clientdata
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: sysfs: fix printk warnings
PCI: fix pci_bus_alloc_resource() hang, prefer positive decode
PCI: read current power state at enable time
PCI: fix size checks for mmap() on /proc/bus/pci files
x86/PCI: coalesce overlapping host bridge windows
PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
|
|
Make sure I2C adapters being registered have the required struct
fields set. If they don't, problems will happen later.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
It's about time to make it clear that i2c_adapter.id is deprecated.
Hopefully this will remind the last user to move over to a different
strategy.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Drivers don't need to include <linux/i2c-id.h>, especially not when
they don't use anything that header file provides.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Michael Hunold <michael@mihu.de>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
Delete unused I2C adapter IDs. Special cases are:
* I2C_HW_B_RIVA was still set in driver rivafb, however no other
driver is ever looking for this value, so we can safely remove it.
* I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no
adapter ID is ever set to this value, so the code in question never
runs. As the code additionally expects that I2C_HW_B_HDPVR may not
be defined, we can delete it now and let the lirc_zilog driver
maintainer rewrite this piece of code.
Big thanks for Hans Verkuil for doing all the hard work :)
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit. This is obsolete meanwhile, so fix it and hope the word will spread.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Alan Cox <alan@linux.intel.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets
clobbered") to work around the gcc miscompiling i8k.c to add "+m
(*regs)" caused register pressure problems and a build failure.
Changing the 'asm' statement to 'asm volatile' instead should prevent
that and works around the gcc bug as well, so we can remove the "+m".
[ Background on the gcc bug: a memory clobber fails to mark the function
the asm resides in as non-pure (aka "__attribute__((const))"), so if
the function does nothing else that triggers the non-pure logic, gcc
will think that that function has no side effects at all. As a result,
callers will be mis-compiled.
Adding the "+m" made gcc see that it's not a pure function, and so
does "asm volatile". The problem was never really the need to mark
"*regs" as changed, since the memory clobber did that part - the
problem was just a bug in the gcc "pure" function analysis - Linus ]
Signed-off-by: Jim Bos <jim876@xs4all.nl>
Acked-by: Jakub Jelinek <jakub@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On the W83795ADG, there's a single pin for BEEP and OVT#, so you
can't have both. Check the configuration and don't create beep
attributes when BEEP pin is not available.
The W83795G has a dedicated BEEP pin so the functionality is always
available there.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
We can't read the intrusion state from the real-time alarm registers
as we do for all other alarm flags, because real-time alarm bits don't
stick (by definition) and the intrusion state has to stick until
explicitly cleared (otherwise it has little value.)
So we have to use the interrupt status register instead, which is read
from the same address but with a configuration bit flipped in another
register.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
Don't expose raw register values to user-space. Decode and encode
temperature channels selected as temperature sources as needed.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
Temperature sources are not correlated directly with temperature
channels. A look-up table is required to find out which temperature
sources can be used depending on which temperature channels (both
analog and digital) are enabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
Expose fan control method (DC vs. PWM) using the standard sysfs
attributes. I've made it read-only as the board should be wired for
a given mode, the BIOS should have set up the chip for this mode, and
you shouldn't have to change it. But it would be easy enough to make
it changeable if someone comes up with a use case.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
There were two bugs:
* Speed cruise mode was improperly reported for all fans but fan1.
* Fan control method (PWM vs. DC) was mixed with the control mode.
It will be added back as a separate attribute, as per the standard
sysfs interface.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
This clears the following build-time warnings I was seeing:
drivers/hwmon/lm95241.c: In function "set_interval":
drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max2":
drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_max1":
drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min2":
drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_min1":
drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type2":
drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
drivers/hwmon/lm95241.c: In function "set_type1":
drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result
This also fixes a small race in set_interval() as a side effect: by
working with a temporary local variable we prevent data->interval from
being accessed at a time it contains the interval value in the wrong
unit.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Davide Rizzo <elpa.rizzo@gmail.com>
|
|
My old mail address doesn't exist anymore. This changes all occurrences
to my new address.
Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
|
|
Cast pci_resource_start() and pci_resource_len() to u64 for printk.
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t'
drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6
* 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6:
fsl-diu-fb: drop dead ioctl define
MAINTAINERS: Add an fbdev git tree entry.
OMAP: DSS: Fix documentation regarding 'vram' kernel parameter
OMAP: VRAM: Fix boot-time memory allocation
OMAP: VRAM: improve VRAM error prints
sisfb: limit POST memory test according to PCI resource length
fbdev: sh_mobile_lcdc: use correct number of modes, when using the default
fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing
fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug
|
|
The radix tree retry logic got a bit of an overhaul and subsequently
broke the virtual IRQ subgroup build. Simply switch over to
radix_tree_deref_retry() as per the filemap changes, which the virq
lookup logic was modelled after in the first place.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/urgent
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
drivers/pcmcia/soc_common.c: Use printf extension %pV
pcmcia: fix warning in synclink driver
pcmcia/sa1100: don't put machine specific init functions in .init.text
pcmcia/cm4000: fix error code
pd6729: Coding Style fixes
|
|
This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd.
Crashes any x86 serial console bootup:
Console: colour VGA+ 80x25
BUG: unable to handle kernel NULL pointer dereference at 0000000000000158
IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430
...
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Greg KH <gregkh@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: padlock - Fix AES-CBC handling on odd-block-sized input
crypto: n2 - dubious error check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] soc-camera: Compile fixes for mx2-camera
[media] SoC Camera: ov6650: minor cleanups
[media] SOC Camera: OMAP1: typo fix
[media] SoC Camera: OMAP1: update for recent videobuf changes
[media] SoC Camera: OMAP1: update for recent framework changes
[media] ARM mx3_camera: check for DMA engine type
[media] tm6000: bugfix set tv standards
[media] cafe_ccic: fix subdev configuration
[media] saa7134: Fix autodetect for Behold A7 and H7 TV cards
[media] v4l: kill the BKL
[media] BZ#22292: dibx000_common: Restore i2c algo pointer
|
|
More recent GCC caused the i8k driver to stop working, on Slackware
compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't
work anymore, meaning the driver didn't load or gave total nonsensical
output.
As it turned out the asm(..) statement forgot to mention it modifies the
*regs variable.
Credits to Andi Kleen and Andreas Schwab for providing the fix.
Signed-off-by: Jim Bos <jim876@xs4all.nl>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Currently we have:
--w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method
which is just crazy. Change this to --w-------.
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@kernel.org (for 2.6.36)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)
can-bcm: fix minor heap overflow
gianfar: Do not call device_set_wakeup_enable() under a spinlock
ipv6: Warn users if maximum number of routes is reached.
docs: Add neigh/gc_thresh3 and route/max_size documentation.
axnet_cs: fix resume problem for some Ax88790 chip
ipv6: addrconf: don't remove address state on ifdown if the address is being kept
tcp: Don't change unlocked socket state in tcp_v4_err().
x25: Prevent crashing when parsing bad X.25 facilities
cxgb4vf: add call to Firmware to reset VF State.
cxgb4vf: Fail open if link_start() fails.
cxgb4vf: flesh out PCI Device ID Table ...
cxgb4vf: fix some errors in Gather List to skb conversion
cxgb4vf: fix bug in Generic Receive Offload
cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue()
ixgbe: Look inside vlan when determining offload protocol.
bnx2x: Look inside vlan when determining checksum proto.
vlan: Add function to retrieve EtherType from vlan packets.
virtio-net: init link state correctly
ucc_geth: Fix deadlock
ucc_geth: Do not bring the whole IF down when TX failure.
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
drivers/ata/pata_octeon_cf.c: delete double assignment
pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test
libata: fix NULL sdev dereference race in atapi_qc_complete()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits)
Revert "staging: tidspbridge: replace iommu custom for opensource implementation"
Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c"
Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name"
Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c"
Revert "staging: tidspbridge - fix mmufault support"
Revert "staging: tidspbridge - remove hw directory"
Revert "staging: tidspbridge - move all iommu related code to a new file"
Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct"
Revert "staging: tidspbridge - remove reserved memory clean up"
Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions"
Revert "staging: tidspbridge - remove dmm custom module"
Revert "staging: tidspbridge - update Kconfig to select IOMMU module"
staging: tidspbridge: hardcode SCM macros while fix is upstreamed
Staging: keucr driver: fix uninitialized variable & proper memset length
omap: dsp: remove shm from normal memory
Staging: wlan-ng: Fix wrong #ifdef #endif sequence
Staging: Update parameters for cfg80211 key management operation
Staging: ath6kl: Fix pointer casts on 64-bit architectures
Staging: batman-adv: suppress false warning when changing the mac address
Staging: batman-adv: fix interface alternating and bonding reggression
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits)
Revert "USB: xhci: Use GFP_ATOMIC under spin_lock"
USB: ohci-jz4740: Fix spelling in MODULE_ALIAS
UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than crashing on NULL dereference if kzalloc fails
usb: core: fix information leak to userland
usb: misc: iowarrior: fix information leak to userland
usb: misc: sisusbvga: fix information leak to userland
usb: subtle increased memory usage in u_serial
USB: option: fix when the driver is loaded incorrectly for some Huawei devices.
USB: xhci: Use GFP_ATOMIC under spin_lock
usb: gadget: goku_udc: add registered flag bit, fixing build
USB: ehci/mxc: compile fix
USB: Fix FSL USB driver on non Open Firmware systems
USB: the development of the usb tree is now in git
usb: musb: fail unaligned DMA transfers on v1.8 and above
USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial
usb.h: fix ioctl kernel-doc info
usb: musb: gadget: kill duplicate code in musb_gadget_queue()
usb: musb: Fix handling of spurious SESSREQ
usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time
USB: musb: blackfin: push clkin value to platform resources
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
n_gsm: Fix length handling
n_gsm: Copy n2 over when configuring via ioctl interface
serial: bfin_5xx: grab port lock before making port termios changes
serial: bfin_5xx: disable CON_PRINTBUFFER for consoles
serial: bfin_5xx: remove redundant SSYNC to improve TX speed
serial: bfin_5xx: always include DMA headers
vcs: make proper usage of the poll flags
amiserial: Remove unused variable icount
8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang
tty_ldisc: Fix BUG() on hangup
TTY: restore tty_ldisc_wait_idle
SERIAL: blacklist si3052 chip
drivers/serial/bfin_5xx.c: Fix line continuation defects
tty: prevent DOS in the flush_to_ldisc
8250: add support for Kouwell KW-L221N-2
nozomi: Fix warning from the previous TIOCGCOUNT changes
tty: fix warning in synclink driver
tty: Fix formatting in tty.h
tty: the development tree is now done in git
|