summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2008-08-01try harder to load tty ldisc driverEugeniy Meshcheryakov
Currently function tty_ldisc_get() tries to load an ldisc driver module only when tty_ldisc_try_get() returns -EAGAIN. This happens only if module is being unloaded. If ldisc module is not loaded tty_ldisc_try_get() returns -EINVAL and this case is not handled in tty_ldisc_get(), so request_module() is not called. Attached patch fixes this by calling request_module() if tty_ldisc_try_get() returned any error code. I discovered this when my UMTS modem stopped working with 2.6.27-rc1 because module ppp_async was not loaded. Signed-off-by: Eugeniy Meshcheryakov <eugen@debian.org> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01Merge branch 'zero-len' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6 * 'zero-len' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/misc-2.6: drivers/media, include/media: delete zero-length files
2008-08-01PNP: fix formatting of dbg_pnp_show_resources() outputBjorn Helgaas
Each resource should be printed on its own line, so start snprintf'ing at the beginning of the buffer every time through the loop. Also, use scnprintf() rather than snprintf() when building up the buffer to print. scnprintf() returns the number of characters actually written into the buffer (not including the trailing NULL). snprintf() returns the number of characters that *would be* written, assuming everything would fit in the buffer. That's nice if we want to resize the buffer to make sure everything fits, but in this case, I just want to keep from overflowing the buffer, and it's OK if the output is truncated. Using snprintf() meant that my "len" could grow to be more than the the buffer size, which makes "sizeof(buf) - len" negative, which causes this alarming WARN_ON: http://marc.info/?l=linux-kernel&m=121736480005656&w=2 More useful snprintf/scnprintf discussion: http://lwn.net/Articles/69419/ Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Reported-by: Pete Clements <clem@clem.clem-digital.net> Cc: Rene Herman <rene.herman@keyaccess.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01Remove newline from the description of module parametersNiels de Vos
Some module parameters with only one line have the '\n' at the end of the description. This is not needed nor wanted as after the description the type (i.e. int) is followed by a newline. Some modules contain a multi-line description, these are not affected by this patch. Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Ed L. Cashin <ecashin@coraid.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Roland Dreier <rolandd@cisco.com> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_it821x: Driver updates and reworking libata.h: replace __FUNCTION__ with __func__ ata_piix: subsys 106b:00a3 is apple ich8m too libata-core: make sure that ata_force_tbl is freed in case of an error libata: update atapi disable handling pata_via: add VX800 flag; add function for fixing h/w bugs pata_ali: misplaced pci_dev_put()
2008-08-01add reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRUDean Nelson
Add a reverse dependency of CONFIG_SGI_XP upon CONFIG_SGI_GRU to Kconfig. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01add dependency of CONFIG_SGI_XP upon CONFIG_NETDean Nelson
Add a dependency of CONFIG_SGI_XP upon CONFIG_NET to Kconfig. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-01Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds
* 'for-linus' of git://neil.brown.name/md: md: raid10: wake up frozen array md: do not count blocked devices as spares md: do not progress the resync process if the stripe was blocked md: delay notification of 'active_idle' to the recovery thread md: fix merge error md: move async_tx_issue_pending_all outside spin_lock_irq
2008-08-01Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: locking: fix mutex @key parameter kernel-doc notation
2008-08-01Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: md: the bitmap code needs to use blk_plug_device_unlocked() block: add a blk_plug_device_unlocked() that grabs the queue lock
2008-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits) tcp: MD5: Fix IPv6 signatures skbuff: add missing kernel-doc for do_not_encrypt net/ipv4/route.c: fix build error tcp: MD5: Fix MD5 signatures on certain ACK packets ipv6: Fix ip6_xmit to send fragments if ipfragok is true ipvs: Move userspace definitions to include/linux/ip_vs.h netdev: Fix lockdep warnings in multiqueue configurations. netfilter: xt_hashlimit: fix race between htable_destroy and htable_gc netfilter: ipt_recent: fix race between recent_mt_destroy and proc manipulations netfilter: nf_conntrack_tcp: decrease timeouts while data in unacknowledged irda: replace __FUNCTION__ with __func__ nsc-ircc: default to dongle type 9 on IBM hardware bluetooth: add quirks for a few hci_usb devices hysdn: remove the packed attribute from PofTimStamp_tag isdn: use the common ascii hex helpers tg3: adapt tg3 to use reworked PCI PM code atm: fix direct casts of pointers to u32 in the InterPhase driver atm: fix const assignment/discard warnings in the ATM networking driver net: use the common ascii hex helpers random32: seeding improvement ...
2008-08-01Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6Linus Torvalds
* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: hwmon: needs new maintainer hwmon: (lm85) Simplify device initialization function hwmon: (lm85) Misc cleanups hwmon: (lm85) Don't write back cached values hwmon: (lm85) Drop dead code hwmon: (lm85) Coding-style cleanups hwmon: (lm75) add new-style driver binding hwmon: (lm75) cleanup/reorg hwmon: (adt7473) clarify an awkward bit of code hwmon: (adt7473) Remove unused defines hwmon: (dme1737) fix voltage scaling hwmon: (dme1737) probe all addresses hwmon: (dme1737) demacrofy for readability
2008-08-01md: the bitmap code needs to use blk_plug_device_unlocked()Jens Axboe
It doesn't hold the queue lock, so it's both racey on the queue flags and thus spews a warning. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-01Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warnings [MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of bf5xx_nand_probe function [MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk() [MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by default [MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to probe/remove functions [MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the Blackfin bootrom uses [MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we extract 11 bits from each register instead of 10 [MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from the first 256 bytes if operating on 512 pages [MTD] [NAND] diskonchip.c fix sparse endian warnings [MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.h [JFFS2] Fix allocation of summary buffer Fix rename of at91_nand -> atmel_nand [MTD] [NOR] drivers/mtd/chips/jedec_probe.c: fix Am29DL800BB device ID [MTD] MTD_DEBUG always does compile-time typechecks [MTD] DataFlash: bugfix, binary page sizes now handled [MTD] [NAND] fsl_elbc_nand.c: fix printk warning [MTD] [NAND] nandsim: support random page read command [MTD] [NAND] fix subpage read for small page NAND
2008-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: [PATCH] pass struct path * to do_add_mount() [PATCH] switch mtd and dm-table to lookup_bdev() [patch 3/4] vfs: remove unused nameidata argument of may_create() [PATCH] devpts: switch to IDA [PATCH 2/2] proc: switch inode number allocation to IDA [PATCH 1/2] proc: fix inode number bogorithmetic [PATCH] fix bdev leak in block_dev.c do_open() [PATCH] fix races and leaks in vfs_quota_on() users [PATCH] clean dup2() up a bit [PATCH] merge locate_fd() and get_unused_fd() [PATCH] ipv4_static_sysctl_init() should be under CONFIG_SYSCTL Re: BUG at security/selinux/avc.c:883 (was: Re: linux-next: Tree
2008-08-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: au1xmmc: raise segment size limit. mmc_block: use proper sg iterators mmc: properly iterate over sg list in debug check mmc_test: Revert "mmc_test: test oversized sg lists" sdhci: check correct return value sdhci: disable DMA for req, not completely sdhci: handle bug in JMB38x for sizes < 4 bytes
2008-08-01Merge branch 'reg-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6 * 'reg-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6: regulator: TI bq24022 Li-Ion Charger driver regulator: maintainers - add maintainers for regulator framework. regulator: documentation - ABI regulator: documentation - machine regulator: documentation - regulator driver regulator: documentation - consumer interface regulator: documentation - overview regulator: core kbuild files regulator: regulator test harness regulator: add support for fixed regulators. regulator: regulator framework core regulator: fixed regulator interface regulator: machine driver interface regulator: regulator driver interface regulator: consumer device interface
2008-08-01Merge git://git.infradead.org/battery-2.6Linus Torvalds
* git://git.infradead.org/battery-2.6: power_supply: Sharp SL-6000 (tosa) batteries support power_supply: fix up CHARGE_COUNTER output to be more precise power_supply: add CHARGE_COUNTER property and olpc_battery support for it power_supply: bump EC version check that we refuse to run with in olpc_battery power_supply: cleanup of the OLPC battery driver power_supply: add eeprom dump file to olpc_battery's sysfs power_supply: Support serial number in olpc_battery
2008-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (28 commits) mm/hugetlb.c must #include <asm/io.h> video: Fix up hp6xx driver build regressions. sh: defconfig updates. sh: Kill off stray mach-rsk7203 reference. serial: sh-sci: Fix up SH7760/SH7780/SH7785 early printk regression. sh: Move out individual boards without mach groups. sh: Make sure AT_SYSINFO_EHDR is exposed to userspace in asm/auxvec.h. sh: Allow SH-3 and SH-5 to use common headers. sh: Provide common CPU headers, prune the SH-2 and SH-2A directories. sh/maple: clean maple bus code sh: More header path fixups for mach dir refactoring. sh: Move out the solution engine headers to arch/sh/include/mach-se/ sh: I2C fix for AP325RXA and Migo-R sh: Shuffle the board directories in to mach groups. sh: dma-sh: Fix up dreamcast dma.h mach path. sh: Switch KBUILD_DEFCONFIG to shx3_defconfig. sh: Add ARCH_DEFCONFIG entries for sh and sh64. sh: Fix compile error of Solution Engine sh: Proper __put_user_asm() size mismatch fix. sh: Stub in a dummy ENTRY_OFFSET for uImage offset calculation. ...
2008-08-01au1xmmc: raise segment size limit.Manuel Lauss
Raise the DMA block size limit from 2048 bytes to the maximum supported by the DMA controllers on the chip (64KB on Au1100, 4MB on Au1200). This gives a very small performance boost and apparently fixes an oops when MMC-DMA and network traffic are active at the same time. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01mmc_block: use proper sg iteratorsPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01mmc: properly iterate over sg list in debug checkPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01mmc_test: Revert "mmc_test: test oversized sg lists"Pierre Ossman
This reverts commit 48b5352ea1891455eb8e824cf7d92f66931a090f. Oversized sg lists are not allowed anymore, and the core even checks for them in debug mode, so this test is entirely incorrect. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: check correct return valuePierre Ossman
Fix a copy-and-paste error. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: disable DMA for req, not completelyPierre Ossman
The wrong flag was manipulated when an invalid sg list was given, turning off DMA on the next (and all subsequent) request instead of the current one. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01sdhci: handle bug in JMB38x for sizes < 4 bytesPierre Ossman
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-08-01[PATCH] switch mtd and dm-table to lookup_bdev()Al Viro
No need to open-code it... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-08-01[MTD] [NAND] drivers/mtd/nand/nandsim.c: fix printk warningsAndrew Morton
Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: Cleanup the error exit path of ↵Bryan Wu
bf5xx_nand_probe function Signed-off-by: Bryan Wu <cooloney@kernel.org> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: use standard dev_err() rather than printk()Mike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: enable Blackfin nand HWECC support by defaultMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: add proper devinit/devexit markings to ↵Mike Frysinger
probe/remove functions Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: add support for the ECC layout the ↵Mike Frysinger
Blackfin bootrom uses Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: fix bug - hw ecc calc by making sure we ↵Mike Frysinger
extract 11 bits from each register instead of 10 Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] Blackfin NFC Driver: fix bug - do not clobber the status from ↵Mike Frysinger
the first 256 bytes if operating on 512 pages Singed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[S390] qeth: avoid use of include/asm-s390Martin Schwidefsky
The planned move of include/asm-s390 to arch/s390/include/asm requires that all includes for asm headers use include/asm and not include/asm-s390. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] dont use kthread for smp_rescan_cpus().Heiko Carstens
Since git commit 3da1c84c00c7e5fa8348336bd8c342f9128b0f14 "workqueues: make get_online_cpus() useable for work->func()" it is safe to call get_online_cpus() from workqueue context. So remove the kthread workaround again. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] virtio console: fix section mismatch warning.Heiko Carstens
Fix these two false positive warnings: WARNING: vmlinux.o(.text+0x2e1cc4): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:early_put_chars() The function s390_virtio_console_init() references the function __init early_put_chars(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of early_put_chars is wrong. WARNING: vmlinux.o(.text+0x2e1cd0): Section mismatch in reference from the function s390_virtio_console_init() to the function .init.text:virtio_cons_early_init() The function s390_virtio_console_init() references the function __init virtio_cons_early_init(). This is often because s390_virtio_console_init lacks a __init annotation or the annotation of virtio_cons_early_init is wrong. Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] qdio: fix section mismatch bug.Heiko Carstens
Fix the two section mismatch warnings below. This fixes two real bugs since the code which has __exit annotations may already be gone when it is called. WARNING: vmlinux.o(.init.text+0x1cc4a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_setup_exit() The function __init init_QDIO() references a function __exit qdio_setup_exit(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of qdio_setup_exit() so it may be used outside an exit section. WARNING: vmlinux.o(.init.text+0x1cc7a): Section mismatch in reference from the function init_QDIO() to the function .exit.text:qdio_remove_perf_stats() The function __init init_QDIO() references a function __exit qdio_remove_perf_stats(). This is often seen when error handling in the init function uses functionality in the exit path. The fix is often to remove the __exit annotation of qdio_remove_perf_stats() so it may be used outside an exit section. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] qdio: make sure qdr is aligned to page sizeJan Glauber
kzalloc does not guarantee the required alignment of qdr to page size, use get_zeroed_page instead. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
2008-08-01[S390] Add support for memory hot-remove.Gerald Schaefer
This patch enables memory hot-remove on s390. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] cio: Memory allocation for idset changed.Michael Ernst
Memory allocation for the quite huge idset changed from kzalloc to vmalloc. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] qeth: preallocated qeth header for hiper socketFrank Blaschka
For hiper socket devices this patch will economize the reallocation of the tx skb data segment by allocating separate memory for the qdio transport information (qeth header). Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] nohz/sclp: disable timer on synchronous waits.Heiko Carstens
sclp_sync_wait wait synchronously for an sclp interrupt and disables timer interrupts. However on the irq enter paths there is an extra check if a timer interrupt would be due and calls the timer callback. This would schedule softirqs in the wrong context. So introduce local_tick_enable/disable which prevents this. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] dasd: Add support for enhanced VM UIDStefan Weinhuber
When z/VM provides two virtual devices (minidisks) that reside on the same real device, both will receive the configuration data from the real device and thus get the same uid. To fix this problem, z/VM provides an additional configuration data record that allows to distinguish between minidisks. z/VM APAR VM64273 needs be installed so this fix has an effect. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[MTD] [NAND] diskonchip.c fix sparse endian warningsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-08-01[MTD] [NAND] drivers/mtd/nand/nandsim.c needs div64.hAndrew Morton
drivers/mtd/nand/nandsim.c: In function 'divide': drivers/mtd/nand/nandsim.c:462: error: implicit declaration of function 'do_div' Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-07-31hwmon: (lm85) Simplify device initialization functionJean Delvare
Clean up and simplify the device initialization function: * Degrade error messages to warnings - what they really are. * Stop warning about VxI mode, we don't really care. * Drop comment about lack of limit initialization - that's the standard way, all hardware monitoring drivers do that. * Only read the configuration register once. * Only write back to the configuration register if needed. * Don't attempt to clear the lock bit, it locks itself to 1. * Move the function to before it's called, so that we no longer need to forware declare it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31hwmon: (lm85) Misc cleanupsJean Delvare
Misc cleanups to the lm85 hardware monitoring driver: * Mark constant arrays as const. * Remove useless masks. * Have lm85_write_value return void - nobody is checking the returned value anyway and in some cases it was plain wrong. * Remove useless initializations. * Rename new_client to client in lm85_detect. * Replace cascaded if/else with a switch/case in lm85_detect. * Group similar loops in lm85_update_device. * Remove legacy comments. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
2008-07-31hwmon: (lm85) Don't write back cached valuesJean Delvare
In set_pwm_auto_pwm_minctl, we write cached register bits back to the chip. This is a bad idea as we have no guarantee that the cache is up-to-date. Better read a fresh register value from the chip, it's safer and in fact it is also more simple. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Juerg Haefliger <juergh at gmail.com> Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>