summaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2019-10-31s390/qeth: don't set card state in qeth_qdio_clear_card()Julian Wiedmann
Any change to the card state should only be driven by qeth_l?_set_online() and qeth_l?_stop_card(). qeth_qdio_clear_card() currently also gets called from (a) qeth_core_shutdown(), where we haven't walked through the whole teardown sequence. So changing the state to DOWN is not accurate. (b) qeth_core_hardsetup_card(), which is only called while the card is still in DOWN state. No change in behaviour here. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31s390/qeth: consolidate some duplicated HW cmd codeJulian Wiedmann
When setting a device online, both subdrivers have the same code to program the HW trap and Isolation mode. Move that code into a single place. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31s390/qeth: keep IRQ disabled until NAPI is really doneJulian Wiedmann
When napi_complete_done() returns false, the NAPI instance is still active and we can keep the IRQ disabled a little longer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31s390/qeth: use QDIO_BUFNR()Julian Wiedmann
qdio.h recently gained a new helper macro that handles wrap-around on a QDIO queue, consistently use it across all of qeth. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31s390/qeth: use IQD Multi-WriteJulian Wiedmann
For IQD devices with Multi-Write support, we can defer the queue-flush further and transmit multiple IO buffers with a single TX doorbell. The same-target restriction still applies. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31s390/qdio: implement IQD Multi-WriteJulian Wiedmann
This allows IQD drivers to send out multiple SBALs with a single SIGA instruction. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: register a device link for the qman portal usedMadalin Bucur
Before this change, unbinding the QMan portals did not trigger a corresponding unbinding of the dpaa_eth making use of it; the first QMan portal related operation issued afterwards crashed the kernel. The device link ensures the dpaa_eth dependency upon the qman portal used is honoured at the QMan portal removal. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31soc: fsl: qbman: allow registering a device link for the portal userMadalin Bucur
Introduce the API required to make sure that the devices that use the QMan portal are unbound when the portal is unbound. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: extend delays in ndo_stopMadalin Bucur
Make sure all the frames that are in flight have time to be processed before the interface is completely brought down. Add a missing delay for the Rx path. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: remove netdev_err() for user errorsMadalin Bucur
User reports that an application making an (incorrect) call to restart AN on a fixed link DPAA interface triggers an error in the kernel log while the returned EINVAL should be enough. Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: add dropped frames to percpu ethtool statsMadalin Bucur
Prior to this change, the frames dropped on receive or transmit were not displayed in the ethtool statistics, leaving the dropped frames unaccounted for. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use a page to store the SGTMadalin Bucur
Use a page to store the scatter gather table on the transmit path. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: cleanup skb_to_contig_fd()Madalin Bucur
Remove cast, align variable name, simplify DMA map size computation. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use fd information in dpaa_cleanup_tx_fd()Madalin Bucur
Instead of reading skb fields, use information from the DPAA frame descriptor. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: simplify variables used in dpaa_cleanup_tx_fd()Madalin Bucur
Avoid casts and repeated conversions. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: avoid timestamp read on error pathsMadalin Bucur
The dpaa_cleanup_tx_fd() function is called by the frame transmit confirmation callback but also on several error paths. This function is reading the transmit timestamp value. Avoid reading an invalid timestamp value on the error paths. Fixes: 4664856e9ca2 ("dpaa_eth: add support for hardware timestamping") Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: perform DMA unmapping before readMadalin Bucur
DMA unmapping is required before accessing the HW provided timestamping information. Fixes: 4664856e9ca2 ("dpaa_eth: add support for hardware timestamping") Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use page backed rx buffersMadalin Bucur
Change the buffers used for reception from netdev_frags to pages. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31dpaa_eth: use only one buffer pool per interfaceMadalin Bucur
Currently the DPAA Ethernet driver is using three buffer pools for each interface, with three different sizes for the buffers provided for the FMan reception path. This patch reduces the number of buffer pools to one per interface. This change is in preparation of another, that will be switching from netdev_frags to page backed buffers for the receive path. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup byte order issues when printedGuojia Liao
Though the hip08 and the IMP(Intelligent Management Processor) have the same byte order right now, it is better to convert __be or __le variable into the CPU's byte order before print. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some print format warningGuojia Liao
Using '%d' for printing type unsigned int or '%u' for type int would cause static tools to give false warnings, so this patch cleanups this warning by using the suitable format specifier of the type of variable. BTW, modifies the type of some variables and macro to synchronize with their usage. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: add or modify some commentsGuangbin Huang
This patch makes the comment for macro HCLGE_MBX_GET_VF_FLR_STATUS more correct, and adds comments in some place to make the code more readable. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: optimize local variable initializationGuangbin Huang
The variable tx_ring is unnecessary to be initialized as it will be set before used, and the variable rst_cnt is better to be initialized when declaration for simplification. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup a format-truncation warningGuojia Liao
In hns3_nic_init_irq(), when '*_int_idx' has more than 9 digits and the length of netdev's name is IFNAMSIZ, the total length of final name will be bigger the HNAE3_INT_NAME_LEN - 1, even though '*_int_idx' will never have such large value, but the compiler gives a format-truncation warning for this case. So this patch just enlarges the length to avoid this warning. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some coding style issuesGuangbin Huang
To unify code style and make code simpler, this patch modifies some code, deletes unnecessary blank lines and {}, changes location of code, and so on. No functional change. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: cleanup some magic numbersGuojia Liao
To make the code more readable, this patch replaces some magic numbers with macro or sizeof operation. Also uses macro lower_32_bits and upper_32_bits to get bits 0-31 and 32-63 of a number, instead of using type conversion and '>>' operation. No functional change. Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: add struct netdev_queue debug info for TX timeoutYunsheng Lin
When there is a TX timeout, we can tell if the driver or stack has stopped the queue by looking at state field, and when has the last packet transmited by looking at trans_start field. So this patch prints these two field in the hns3_get_tx_timeo_queue_info(). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31net: hns3: dump some debug information when reset failHuazhong Tan
When reset fails, there is some information that will help for finding out why does reset fail. and removes an unused core_rst_cnt field in struct hclge_rst_stats. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bnxt_en: Add support to collect crash dump via ethtoolVasundhara Volam
Driver supports 2 types of core dumps. 1. Live dump - Firmware dump when system is up and running. 2. Crash dump - Dump which is collected during firmware crash that can be retrieved after recovery. Crash dump is currently supported only on specific 58800 chips which can be retrieved using OP-TEE API only, as firmware cannot access this region directly. User needs to set the dump flag using following command before initiating the dump collection: $ ethtool -W|--set-dump eth0 N Where N is "0" for live dump and "1" for crash dump Command to collect the dump after setting the flag: $ ethtool -w eth0 data Filename v3: Modify set_dump to support even when CONFIG_TEE_BNXT_FW=n. Also change log message to netdev_info(). Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31bnxt_en: Add support to invoke OP-TEE API to reset firmwareVasundhara Volam
In error recovery process when firmware indicates that it is completely down, initiate a firmware reset by calling OP-TEE API. Cc: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31firmware: broadcom: add OP-TEE based BNXT f/w managerVikas Gupta
This driver registers on TEE bus to interact with OP-TEE based BNXT firmware management modules Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Generalize split count checkJiri Pirko
Make the check generic for any possible value, not only 2 and 4. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Iterate over all ports in gap during unsplit createJiri Pirko
During recreation of original unsplit ports, just simply iterate over the whole gap and recreate whatever originally existed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Fix base port get for split count 4 and 8Jiri Pirko
The current code considers only split by 2 or 4. Make the base port getting generic and allow split by 8 to be handled correctly. Generalize the used port checks as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use port_module_max_width to compute base port indexJiri Pirko
Instead of using constant value, use port_module_max_width which is aligned with the cluster size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Remember split base local port and use it in unsplitJiri Pirko
Don't compute the original base local port during unsplit, rather remember it in mlxsw_sp_port structure during split port creation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Introduce resource for getting offset of 4 lanes split portJiri Pirko
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in two split ports each of 4 lanes. Add a resource that can be used to obtain local port offset in that case. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Push getting offsets of split ports into a helperJiri Pirko
Get local port offsets of split port in a separate helper function and use it in both split and unsplit function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Add sanity checks into module info getJiri Pirko
Driver assumes certain values in the PMLP register. Add checks that verify that PMLP register provides fitting values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Pass mapping values in port mapping structureJiri Pirko
Pass the port mapping structure down to create, module_map and other function instead of individual values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use mapping of port being split for creating split portsJiri Pirko
Don't use constant max width value and instead of that, use the actual width of the port. Also don't pass module value and use the value stored in the same structure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Replace port_to_module array with array of structsJiri Pirko
Store the initial PMLP register configuration into array of structures instead of just simple array of module numbers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Distinguish between unsplittable and split portJiri Pirko
Currently when user does split, he is not able to distinguish if the port cannot be split because it is already split, or because it cannot be split at all. Add another check for split flag to distinguish this. Also add check forbidding split when maximal width is 1. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Move max_width check up before count checkJiri Pirko
The fact that the port cannot be split further should be checked before checking the count, so move it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use PMTM register to get max module widthJiri Pirko
Currently the max module width is hard-coded according to ASIC type. That is not entirely correct, as the max module width might differ per-board. Use PMTM register to query FW for maximal width of a module. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Add Port Module Type Mapping RegisterJiri Pirko
The PMTM allows query or configuration of module types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Extend PMLP tx/rx lane value size to 4 bitsJiri Pirko
The tx/rx lane fields got extended to 4 bits, update the reg field description accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31cxgb4/l2t: Simplify 't4_l2e_free()' and '_t4_l2e_free()'Christophe JAILLET
Use '__skb_queue_purge()' instead of re-implementing it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31efi/efi_test: Lock down /dev/efi_test and require CAP_SYS_ADMINJavier Martinez Canillas
The driver exposes EFI runtime services to user-space through an IOCTL interface, calling the EFI services function pointers directly without using the efivar API. Disallow access to the /dev/efi_test character device when the kernel is locked down to prevent arbitrary user-space to call EFI runtime services. Also require CAP_SYS_ADMIN to open the chardev to prevent unprivileged users to call the EFI runtime services, instead of just relying on the chardev file mode bits for this. The main user of this driver is the fwts [0] tool that already checks if the effective user ID is 0 and fails otherwise. So this change shouldn't cause any regression to this tool. [0]: https://wiki.ubuntu.com/FirmwareTestSuite/Reference/uefivarinfo Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Matthew Garrett <mjg59@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191029173755.27149-7-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-31x86, efi: Never relocate kernel below lowest acceptable addressKairui Song
Currently, kernel fails to boot on some HyperV VMs when using EFI. And it's a potential issue on all x86 platforms. It's caused by broken kernel relocation on EFI systems, when below three conditions are met: 1. Kernel image is not loaded to the default address (LOAD_PHYSICAL_ADDR) by the loader. 2. There isn't enough room to contain the kernel, starting from the default load address (eg. something else occupied part the region). 3. In the memmap provided by EFI firmware, there is a memory region starts below LOAD_PHYSICAL_ADDR, and suitable for containing the kernel. EFI stub will perform a kernel relocation when condition 1 is met. But due to condition 2, EFI stub can't relocate kernel to the preferred address, so it fallback to ask EFI firmware to alloc lowest usable memory region, got the low region mentioned in condition 3, and relocated kernel there. It's incorrect to relocate the kernel below LOAD_PHYSICAL_ADDR. This is the lowest acceptable kernel relocation address. The first thing goes wrong is in arch/x86/boot/compressed/head_64.S. Kernel decompression will force use LOAD_PHYSICAL_ADDR as the output address if kernel is located below it. Then the relocation before decompression, which move kernel to the end of the decompression buffer, will overwrite other memory region, as there is no enough memory there. To fix it, just don't let EFI stub relocate the kernel to any address lower than lowest acceptable address. [ ardb: introduce efi_low_alloc_above() to reduce the scope of the change ] Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191029173755.27149-6-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-05 21:33:51 +0000