summaryrefslogtreecommitdiffstats
path: root/drivers/w1
AgeCommit message (Collapse)Author
2012-08-161-Wire: Add support for the maxim ds1825 temperature sensorRaphael Assenat
This patch adds support for maxim ds1825 based 1-wire temperature sensors. Signed-off-by: Raphael Assenat <raph@8d.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-26Merge tag 'driver-core-3.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core changes from Greg Kroah-Hartman: "Here's the big driver core pull request for 3.6-rc1. Unlike 3.5, this kernel should be a lot tamer, with the printk changes now settled down. All we have here is some extcon driver updates, w1 driver updates, a few printk cleanups that weren't needed for 3.5, but are good to have now, and some other minor fixes/changes in the driver core. All of these have been in the linux-next releases for a while now. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'driver-core-3.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (38 commits) printk: Export struct log size and member offsets through vmcoreinfo Drivers: hv: Change the hex constant to a decimal constant driver core: don't trigger uevent after failure extcon: MAX77693: Add extcon-max77693 driver to support Maxim MAX77693 MUIC device sysfs: fail dentry revalidation after namespace change fix sysfs: fail dentry revalidation after namespace change extcon: spelling of detach in function doc extcon: arizona: Stop microphone detection if we give up on it extcon: arizona: Update cable reporting calls and split headset PM / Runtime: Do not increment device usage counts before probing kmsg - do not flush partial lines when the console is busy kmsg - export "continuation record" flag to /dev/kmsg kmsg - avoid warning for CONFIG_PRINTK=n compilations kmsg - properly print over-long continuation lines driver-core: Use kobj_to_dev instead of re-implementing it driver-core: Move kobj_to_dev from genhd.h to device.h driver core: Move deferred devices to the end of dpm_list before probing driver core: move uevent call to driver_register driver core: fix shutdown races with probe/remove(v3) Extcon: Arizona: Add driver for Wolfson Arizona class devices ...
2012-06-21W1: OMAP HDQ1W: use runtime PMPaul Walmsley
Convert the OMAP HDQ driver to use runtime PM. Compile- and boot-tested, but not tested in actual use. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Tested-by: NeilBrown <neilb@suse.de>
2012-06-21W1: OMAP HDQ1W: use 32-bit register accessesPaul Walmsley
HDQ/1-wire registers are 32 bits long, even if the register contents fit into 8 bits, so accesses must be 32-bit aligned. Evidently the OMAP2/3 interconnects allowed the driver to get away with 8 bit accesses, but the OMAP4 puts a stop to that: [ 1.488800] Driver for 1-wire Dallas network protocol. [ 1.495025] Bad mode in data abort handler detected [ 1.500122] Internal error: Oops - bad mode: 0 [#1] SMP [ 1.505615] Modules linked in: [ 1.508819] CPU: 0 Not tainted (3.3.0-rc1-00008-g45030e9 #992) [ 1.515289] PC is at 0xffff0018 [ 1.518615] LR is at omap_hdq_probe+0xd4/0x2cc The OMAP4430 ES2 Rev X TRM does warn about this restriction in section 23.2.6.2 "HDQ/1-Wire Registers". Fixes the crash on OMAP4430 ES2 Pandaboard. Tested also on OMAP34xx and OMAP2420; it seems to work fine on those chips, although due to the lack of boards with HDQ/1-wire devices here, a more indepth test was not possible. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
2012-06-21W1: OMAP HDQ1W: allow driver to be built on all OMAP2+Paul Walmsley
Allow the OMAP HDQ1W driver to be built for all OMAP2+ SoCs by adjusting KConfig dependencies. The previous dependency required either SOC_OMAP2430 or ARCH_OMAP3 to be set, but the HDQ IP block is present on OMAP2420 and OMAP44xx SoCs. The driver was still selectable on multi-OMAP kernel configurations, however; so the previous prohibition was rather pointless. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
2012-06-18w1: Fix a typo in 'hardware' wordOtavio Salvador
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13w1: Add 1-wire slave device driver for DS28E04-100Markus Franke
Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13W1: split master mutex to avoid deadlocks.NeilBrown
The 'mutex' in struct w1_master is use for two very different purposes. Firstly it protects various data structures such as the list of all slaves. Secondly it protects the w1 buss against concurrent accesses. This can lead to deadlocks when the ->probe code called while adding a slave needs to talk on the bus, as is the case for power_supply devices. ds2780 and ds2781 drivers contain a work around to track which process hold the lock simply to avoid this deadlock. bq27000 doesn't have that work around and so deadlocks. There are other possible deadlocks involving sysfs. When removing a device the sysfs s_active lock is held, so the lock that protects the slave list must take precedence over s_active. However when access power_supply attributes via sysfs, the s_active lock must take precedence over the lock that protects accesses to the bus. So to avoid deadlocks between w1 slaves and sysfs, these must be two separate locks. Making them separate means that the work around in ds2780 and ds2781 can be removed. So this patch: - adds a new mutex: "bus_mutex" which serialises access to the bus. - takes in mutex in w1_search and ds1wm_search while they access the bus for searching. The mutex is dropped before calling the callback which adds the slave. - changes all slaves to use bus_mutex instead of mutex to protect access to the bus - removes w1_ds2790_io_nolock and w1_ds2781_io_nolock, and the related code from drivers/power/ds278[01]_battery.c which calls them. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13w1: omap_hdq: use wait_event_timeout to wait for read to complete.NeilBrown
There is no gain in having a loop - there is no risk of missing the interrupt with wait_event_timeout. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13w1: omap_hdq: Fix some error/debug handling.NeilBrown
- some debug messages missed spaces - sometimes no error was returned when it should have been - sometimes a message is printed when there is no error, rather than when there is one. Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13Revert "w1: introduce a slave mutex for serializing IO"Greg Kroah-Hartman
This reverts commit 59d4467be405316916a4087d5b02d99196eeef04. Turns out it was the wrong version, will apply the correct version after this. Reported-by: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12w1: cleanup w1_ueventDevendra Naga
There were some return statements around in the w1_uevent, used goto to cleanup those return statements with the help of err variable, and also removed a semi colon at the end of the w1_uevent's closing brace. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-12w1: introduce a slave mutex for serializing IONeilBrown
w1 devices need a mutex to serial IO. Most use master->mutex. However that is used for other purposes and they can conflict. In particular master->mutex is held while w1_attach_slave_device is called. For bq27000, this registers a 'powersupply' device which tries to read the current status. The attempt to read will cause a deadlock on master->mutex. So create a new per-slave mutex and use that for serializing IO for bq27000. Signed-off-by: NeilBrown <neilb@suse.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-26Merge tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc clock driver changes from Olof Johansson: "The new clock subsystem was merged in linux-3.4 without any users, this now moves the first three platforms over to it: imx, mxs and spear. The series also contains the changes for the clock subsystem itself, since Mike preferred to have it together with the platforms that require these changes, in order to avoid interdependencies and conflicts." Fix up trivial conflicts in arch/arm/mach-kirkwood/common.c (code removed in one branch, added OF support in another) and drivers/dma/imx-sdma.c (independent changes next to each other). * tag 'clock' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (97 commits) clk: Fix CLK_SET_RATE_GATE flag validation in clk_set_rate(). clk: Provide dummy clk_unregister() SPEAr: Update defconfigs SPEAr: Add SMI NOR partition info in dts files SPEAr: Switch to common clock framework SPEAr: Call clk_prepare() before calling clk_enable SPEAr: clk: Add General Purpose Timer Synthesizer clock SPEAr: clk: Add Fractional Synthesizer clock SPEAr: clk: Add Auxiliary Synthesizer clock SPEAr: clk: Add VCO-PLL Synthesizer clock SPEAr: Add DT bindings for SPEAr's timer ARM i.MX: remove now unused clock files ARM: i.MX6: implement clocks using common clock framework ARM i.MX35: implement clocks using common clock framework ARM i.MX5: implement clocks using common clock framework ARM: Kirkwood: Replace clock gating ARM: Orion: Audio: Add clk/clkdev support ARM: Orion: PCIE: Add support for clk ARM: Orion: XOR: Add support for clk ARM: Orion: CESA: Add support for clk ...
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-07Kconfig: replace "--- help ---" with "---help---"Paul Bolle
There are three Kconfig entries with "--- help ---" attributes, and over 2000 Kconfig entries with "---help---" attributes. Apparently the three attributes with embedded spaces are valid. Still, I see little reason for using this obscure variant. And replacing those three attributes with the common variant makes grepping Kconfig files for help texts a bit easier too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-05-04w1: w1_ds2408.c: quite sparse noise about using plaing integer as NULL pointerH Hartley Sweeten
NULL not 0 should be used with pointers. Just remove the offending lines since they will default to NULL anyway. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-29Revert "w1: Add 1-wire slave device driver for DS28E04-100"Greg Kroah-Hartman
This reverts commit f19420c1acb0b573c88a12deb2d42035e22d4a17. It contained lots of errors and warnings and shouldn't have ever been applied, that was my fault, sorry. Cc: Markus Franke <markus.franke@s2002.tu-chemnitz.de> Cc: Evgeniy Polyakov <zbr@ioremap.net>, Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-25w1 i.MX: prepare/unprepare clockSascha Hauer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-04-18w1: w1_ds28e04: unlock on error path in w1_f1C_write_pio()Dan Carpenter
We should unlock here before returning. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11w1: Disable irqs during 1-wire bus operations, extend 1-wire reset pulseMarkus Franke
This patch offers the possibility to disables irqs during w1_write_bit() and w1_reset_bus() operations as timing requirements are very strict for the 1-wire bus protocol. Per default interrupts are enabled but can be disabled via the module parameter "w1_disable_irqs". Extend 1-wire reset pulse length from 480us to 500us as 480us is the minimum requirement for the 1-wire reset/presence pulse. Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-11w1: Add 1-wire slave device driver for DS28E04-100Markus Franke
This patch adds a 1-wire slave device driver for the DS28E04-100. Signed-off-by: Markus Franke <franm@hrz.tu-chemnitz.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-09w1: fix slave driver registration error messageDmitry Artamonow
W1 core prints "Failed to register master driver" if error happens on registering SLAVE driver. Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-08Merge branch 'master' into for-nextJiri Kosina
Merge with latest Linus' tree, as I have incoming patches that fix code that is newer than current HEAD of for-next. Conflicts: drivers/net/ethernet/realtek/r8169.c
2012-04-03w1: fix slave driver registration error messageDmitry Artamonow
W1 core prints "Failed to register master driver" if error happens on registering SLAVE driver. Fix it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-03-08DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave driversRenata Sayakhova
Signed-off-by: Renata Sayakhova <rsayakhova@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24w1_bq27000: Only one thread can access the bq27000 at a time.NeilBrown
If multiple threads try, they trip over each other badly. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24w1_bq27000 - remove w1_bq27000_writeNeilBrown
The function is never used so remove it to avoid bit-rot. It can trivially be re-added if there is ever a need. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-24w1_bq27000: remove unnecessary NULL test.NeilBrown
As recent change means that we now dereference 'dev' before testing for NULL. That means either the change was wrong, or the test isn't needed. As this function is only called from one driver (bq27x000_battery) and it always passed a non-NULL dev, it seems good to assume that the test isn't needed. So remove it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-15w1: Fix w1_bq27000NeilBrown
w1_bq27000 adds a bq27000-battery platform device but does not provide platform data for it. This causes the bq27x00 driver to dereference a NULL pointer. So provide the appropriate platform data. This requires modifying w1_bq27000_read so that it find the w1 device as the parent of the bq device. Also there is no point exporting w1_bq27000_read as nothing else uses it or could use it. So make it static. Finally, as there is no way to track how many batteries have been found, and we will probably only find one, use an id number of '-1' to assert that this is a unique instance. Signed-off-by: NeilBrown <neilb@suse.de> Tested-by: Thomas Weber <weber@corscience.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09w1: Use linux/gpio.h rather than asm/gpio.hMark Brown
Direct inclusion of the asm header has long been deprecated by the introduction of gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-12-09w1: add fast search for single slave busEvgeniy Polyakov
This enables a much more efficient way of device searching. It uses the 1-wire read-rom operation which allows the direct reading of the slave address. BUT this works only with exactly one slave on the bus. Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> index c374978..9761950 100644 Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18USB: convert some miscellanies drivers to use module_usb_driver()Greg Kroah-Hartman
This converts the remaining USB drivers in the kernel to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Guenter Roeck <guenter.roeck@ericsson.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Till Harbaum <till@harbaum.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Cc: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: Jamie Iles <jamie@jamieiles.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-17W1: w1_therm: release the bus during conversion on externally powered devicesMaciej Szmigiero
w1_therm devices can either be bus powered or externally powered. When device is bus powered during temperature conversion the bus have to be left high to provide necessary power. Some masters also allow strong power-up to be enabled in this case. Naturally, no communication over bus can occur during that time. However, if device has external power then there is no such restriction, and host can talk to other devices during temperature conversion. There is command which allows us to check how device is powered, this patch uses it to release the bus on externally w1_therm powered devices during temperature conversion. Also, this changes uninterruptible sleeps there into interruptible ones to avoid long uninterruptible sleep if w1 subsystem happens to grab bus for scan during w1_therm_read(). Signed-off-by: Maciej Szmigiero <mhej@o2.pl> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-02w1: disable irqs in critical sectionJan Weitzel
Interrupting w1_delay() in w1_read_bit() results in missing the low level on the w1 line and receiving "1" instead of "0". Add local_irq_save()/local_irq_restore() around the critical section Signed-off-by: Jan Weitzel <j.weitzel@phytec.de> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02drivers/w1/w1_int.c: multiple masters used same init_nameFlorian Faber
When using multiple masters, w1_int.c would use the .init_name from w1.c for all entities, which will fail when creating a corresponding sysfs entry. This patch uses the unique name previously generated. WARNING: at fs/sysfs/dir.c:451 sysfs_add_one+0x48/0x64() sysfs: cannot create duplicate filename '/devices/w1 bus master' Modules linked in: Call trace: [<9001a604>] warn_slowpath_common+0x34/0x44 [<9001a64c>] warn_slowpath_fmt+0x14/0x18 [<90078020>] sysfs_add_one+0x48/0x64 [<900784ec>] create_dir+0x40/0x68 [<9007857a>] sysfs_create_dir+0x66/0x78 [<900c1a8a>] kobject_add_internal+0x6e/0x104 [<900c1bc0>] kobject_add_varg+0x20/0x2c [<900c1c1c>] kobject_add+0x30/0x3c [<900dbd66>] device_add+0x6a/0x378 [<900dbb4a>] device_initialize+0x12/0x48 [<900dc080>] device_register+0xc/0x10 [<900f99be>] w1_add_master_device+0x162/0x274 [<90008e7a>] w1_gpio_probe+0x66/0xb4 [<9000030c>] kernel_init+0x0/0xe8 [<900dde54>] platform_drv_probe+0xc/0xe [<9000030c>] kernel_init+0x0/0xe8 [<900dd4f8>] driver_probe_device+0x6c/0xdc [<900dd5fc>] __driver_attach+0x34/0x48 [<900dcce8>] bus_for_each_dev+0x2c/0x48 [<900dd5c8>] __driver_attach+0x0/0x48 [<900dd38c>] driver_attach+0x10/0x14 [<900dd16a>] bus_add_driver+0x6a/0x18c [<900dd768>] driver_register+0x60/0xb8 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<9000030c>] kernel_init+0x0/0xe8 [<900ddf48>] platform_driver_register+0x30/0x38 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<9000030c>] kernel_init+0x0/0xe8 [<900ddf5e>] platform_driver_probe+0xe/0x3c [<90008e0c>] w1_gpio_init+0xc/0x14 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<90008e00>] w1_gpio_init+0x0/0x14 [<900126d4>] do_one_initcall+0x34/0x130 [<90000372>] kernel_init+0x66/0xe8 [<90011594>] __initcall_w1_therm_init6+0x0/0x4 [<9001ca3e>] do_exit+0x0/0x3a6 [<9000030c>] kernel_init+0x0/0xe8 [<9001ca3e>] do_exit+0x0/0x3a6 ---[ end trace 5a9233884fead918 ]--- kobject_add_internal failed for w1 bus master with -EEXIST, don't try to register things with the same name in the same directory. Signed-off-by: Florian Faber <faber@faberman.de> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02drivers/power/ds2780_battery.c: add a nolock function to w1 interfaceClifton Barnes
Adds a nolock function to the w1 interface to avoid locking the mutex if needed. Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: <stable@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-02w1: ds2760 and ds2780, use ida for id and ida_simple_get() to get itJonathan Cameron
Straightforward. As an aside, the ida_init calls are not needed as far as I can see needed. (DEFINE_IDA does the same already). Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Cc: Evgeniy Polyakov <zbr@ioremap.net> Acked-by: Clifton Barnes <cabarnes@indesign-llc.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31drivers/w1: Add moduleparam.h to drivers/w1/w1_int.cPaul Gortmaker
It doesn't need the full module.h but it was getting moduleparam.h from the fact that module.h was everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31drivers/w1: Add export.h for EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker
Give these files export.h so that they can reliably get the EXPORT_SYMBOL and THIS_MODULE macros in the future, once module.h isn't implicitly everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-25MAINTAINERS: Evgeniy has movedEvgeniy Polyakov
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-25w1: fix for loop in w1_f29_remove_slave()Dan Carpenter
The for loop was looking for i <= 0 instead of i >= 0 so this function never did anything. Also we started with i = NB_SYSFS_BIN_FILES instead of "NB_SYSFS_BIN_FILES - 1" which is an off by one bug. Reported-by: Bojan Prtvar <prtvar.b@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jean-Franois Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-26drivers/w1/slaves/w1_therm.c: add support for DS28EA00Christian Glindkamp
Signed-off-by: Christian Glindkamp <christian.glindkamp@taskit.de> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-08w1: ds1wm: add a reset recovery parameterJean-François Dagenais
This fixes a regression in 3.0 reported by Paul Parsons regarding the removal of the msleep(1) in the ds1wm_reset() function: : The linux-3.0-rc4 DS1WM 1-wire driver is logging "bus error, retrying" : error messages on an HP iPAQ hx4700 PDA (XScale-PXA270): : : <snip> : Driver for 1-wire Dallas network protocol. : DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko : 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko : ds1wm ds1wm: pass: 1 bus error, retrying : ds1wm ds1wm: pass: 2 bus error, retrying : ds1wm ds1wm: pass: 3 bus error, retrying : ds1wm ds1wm: pass: 4 bus error, retrying : ds1wm ds1wm: pass: 5 bus error, retrying : ... : : The visible result is that the battery charging LED is erratic; sometimes : it works, mostly it doesn't. : : The linux-2.6.39 DS1WM 1-wire driver worked OK. I haven't tried 3.0-rc1, : 3.0-rc2, or 3.0-rc3. This sleep should not be required on normal circuitry provided the pull-ups on the bus are correctly adapted to the slaves. Unfortunately, this is not always the case. The sleep is restored but as a parameter to the probe function in the pdata. [akpm@linux-foundation.org: coding-style fixes] Reported-by: Paul Parsons <lost.distance@yahoo.com> Tested-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15w1: W1_MASTER_DS1WM should depend on GENERIC_HARDIRQSGeert Uytterhoeven
On m68k (which doesn't support generic hardirqs yet): drivers/w1/masters/ds1wm.c: In function `ds1wm_probe': drivers/w1/masters/ds1wm.c: error: implicit declaration of function `irq_set_irq_type' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Jean-Franois Dagenais <dagenaisj@sonatest.com> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26w1: add Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC supportClifton Barnes
Add support for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC. It was suggested to combine this functionality with the current ds2782 driver. Unfortunately, I'm unable to commit the time to refactoring this driver to that extent and I don't have a platform with the ds2782 part to validate that there are no regression issues by adding this functionality. [akpm@linux-foundation.org: use min_t()] Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com> Tested-by: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26w1: have netlink search update kernel listDavid Fries
Reorganize so the netlink connector one wire search command will update the kernel list of detected slave devices. Otherwise, a newly detected device is unusable because unless it's in the kernel list of known devices any commands will result in ENODEV status. Signed-off-by: David Fries <David@Fries.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-26w1: complete the 1-wire (w1) ds1wm driver search algorithmJean-François Dagenais
This adds multi-slave support of the w1 bus for the ds1wm Synthesizable 1-Wire Bus Master. Also many fixes and tweaks based on the rev3 of the datasheet http://datasheets.maxim-ic.com/en/ds/DS1WM.pdf Signed-off-by: Jean-François Dagenais <dagenaisj@sonatest.com> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Szabolcs Gyurko <szabolcs.gyurko@tlt.hu> Cc: Matt Reimer <mreimer@vpop.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>