summaryrefslogtreecommitdiffstats
path: root/drivers/virtio
AgeCommit message (Collapse)Author
2012-09-28virtio_mmio: Don't attempt to create empty virtqueuesBrian Foley
If a virtio device reports a QueueNumMax of 0, vring_new_virtqueue() doesn't check this, and thanks to an unsigned (i < num - 1) loop guard, scribbles over memory when initialising the free list. Avoid by not trying to create zero-descriptor queues, as there's no way to do any I/O with one. Signed-off-by: Brian Foley <brian.foley@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio_mmio: fix off by one error allocating queueBrian Foley
vm_setup_vq fails to allow VirtQueues needing only 2 pages of storage, as it should. Found with a kernel using 64kB pages, but can be provoked if a virtio device reports QueueNumMax where the descriptor table and available ring fit in one page, and the used ring on the second (<= 227 descriptors with 4kB pages and <= 3640 with 64kB pages.) Signed-off-by: Brian Foley <brian.foley@arm.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28drivers/virtio/virtio_pci.c: fix error return codePeter Senna Tschudin
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio: don't crash when device is buggyMichael S. Tsirkin
Because of a sanity check in virtio_dev_remove, a buggy device can crash kernel. And in case of rproc it's userspace so it's not a good idea. We are unloading a driver so how bad can it be? Be less aggressive in handling this error: if it's a driver bug, warning once should be enough. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio: remove CONFIG_VIRTIO_RINGRusty Russell
Everyone who selects VIRTIO is also made to select VIRTIO_RING; just make them synonymous, since we removed the indirection layer some time ago. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio: add help to CONFIG_VIRTIO option.Rusty Russell
Trying to enable a virtio driver (eg CONFIG_VIRTIO_BLK) is painful because it depends on CONFIG_VIRTIO. CONFIG_VIRTIO doesn't tell you how to turn it on (it's selected from anything which provides a virtio bus). This patch at least adds some documentation, visible in menuconfig, as a hint. Reported-by: Kent Overstreet <koverstreet@google.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio: support reserved vqsMichael S. Tsirkin
virtio network device multiqueue support reserves vq 3 for future use (useful both for future extensions and to make it pretty - this way receive vqs have even and transmit - odd numbers). Make it possible to skip initialization for specific vq numbers by specifying NULL for name. Document this usage as well as (existing) NULL callback. Drivers using this not coded up yet, so I simply tested with virtio-pci and verified that this patch does not break existing drivers. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio: introduce an API to set affinity for a virtqueueJason Wang
Sometimes, virtio device need to configure irq affinity hint to maximize the performance. Instead of just exposing the irq of a virtqueue, this patch introduce an API to set the affinity for a virtqueue. The api is best-effort, the affinity hint may not be set as expected due to platform support, irq sharing or irq type. Currently, only pci method were implemented and we set the affinity according to: - if device uses INTX, we just ignore the request - if device has per vq vector, we force the affinity hint - if the virtqueues share MSI, make the affinity OR over all affinities requested Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio-ring: move queue_index to vring_virtqueueJason Wang
Instead of storing the queue index in transport-specific virtio structs, this patch moves them to vring_virtqueue and introduces an helper to get the value. This lets drivers simplify their management and tracing of virtqueues. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio_balloon: not EXPERIMENTAL any more.Rusty Russell
It is not experimental in any vaguely-sane sense. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-09-28virtio-balloon: dependency fixMichael S. Tsirkin
Devices should depend on virtio, not select it. It's supposed to be selected by the particular driver, e.g. VIRTIO_PCI. Make balloon depend on VIRTIO and EXPERIMENTAL (to match description). Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-07-20[SCSI] virtio-scsi: Add vdrv->scan for post VIRTIO_CONFIG_S_DRIVER_OK LUN ↵Nicholas Bellinger
scanning This patch changes virtio-scsi to use a new virtio_driver->scan() callback so that scsi_scan_host() can be properly invoked once virtio_dev_probe() has set add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK) to signal active virtio-ring operation, instead of from within virtscsi_probe(). This fixes a bug where SCSI LUN scanning for both virtio-scsi-raw and virtio-scsi/tcm_vhost setups was happening before VIRTIO_CONFIG_S_DRIVER_OK had been set, causing VIRTIO_SCSI_S_BAD_TARGET to occur. This fixes a bug with virtio-scsi/tcm_vhost where LUN scan was not detecting LUNs. Tested with virtio-scsi-raw + virtio-scsi/tcm_vhost w/ IBLOCK on 3.5-rc2 code. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-07-09virtio-balloon: fix add/get API useMichael S. Tsirkin
Since ee7cd8981e15bcb365fc762afe3fc47b8242f630 'virtio: expose added descriptors immediately.', in virtio balloon virtqueue_get_buf might now run concurrently with virtqueue_kick. I audited both and this seems safe in practice but this is not guaranteed by the API. Additionally, a spurious interrupt might in theory make virtqueue_get_buf run in parallel with virtqueue_add_buf, which is racy. While we might try to protect against spurious callbacks it's easier to fix the driver: balloon seems to be the only one (mis)using the API like this, so let's just fix balloon. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (removed unused var)
2012-05-22virtio-mmio: Devices parameter parsingPawel Moll
This patch adds an option to instantiate guest virtio-mmio devices basing on a kernel command line (or module) parameter, for example: virtio_mmio.devices=0x100@0x100b0000:48 Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22virtio: Use ida to allocate virtio indexAsias He
Current index allocation in virtio is based on a monotonically increasing variable "index". This means we'll run out of numbers after a while. E.g. someone crazy doing this in host side. while(1) { hot-plug a virtio device hot-unplug the virito devcie } Signed-off-by: Asias He <asias@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22virtio: balloon: separate out common code between remove and freeze functionsAmit Shah
The remove and freeze functions have a lot of shared code; put it into a common function that gets called by both. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-22virtio: balloon: drop restore_common()Amit Shah
restore_common() was used when there were different thaw and freeze PM callbacks implemented. We removed thaw in commit f38f8387cbdc4138a492ce9f2a5f04fd3cd3cf33. restore_common() can be removed and virtballoon_restore() can itself do the restore ops. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-05-17virtio: balloon: let host know of updated balloon size before module removalAmit Shah
When the balloon module is removed, we deflate the balloon, reclaiming all the pages that were given to the host. However, we don't update the config values for the new balloon size, resulting in the host showing outdated balloon values. The size update is done after each leak and fill operation, only the module removal case was left out. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15virtio_balloon: fix handling of PAGE_SIZE != 4kMichael S. Tsirkin
As reported by David Gibson, current code handles PAGE_SIZE != 4k completely wrong which can lead to guest memory corruption errors: - page_to_balloon_pfn is wrong: e.g. on system with 64K page size it gives the same pfn value for 16 different pages. - we also need to convert back to linux pfns when we free. - for each linux page we need to tell host about multiple balloon pages, but code only adds one pfn to the array. This patch fixes all that, tested with a 64k ppc64 kernel. Reported-by: David Gibson <david@gibson.dropbear.id.au> Tested-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-15virtio_balloon: Fix endian bugDavid Gibson
Although virtio config space fields are usually in guest-native endian, the spec for the virtio balloon device explicitly states that both fields in its config space are little-endian. However, the current virtio_balloon driver does not have a suitable endian swap for the 'num_pages' field, although it does have one for the 'actual' field. This patch corrects the bug, adding sparse annotation while we're at it. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-31virtio-pci: switch to PM ops macro to initialise PM functionsAmit Shah
Use the SET_SYSTEM_SLEEP_PM_OPS macro to initialise the suspend/resume functions in the new PM API. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31virtio-pci: S3 supportAmit Shah
There's no difference in supporting S3 and S4 for virtio devices: the vqs have to be re-created as the device has to be assumed to be reset at restore-time. Since S4 already handles this situation, we can directly use the same code and callbacks for S3 support. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31virtio-pci: drop restore_common()Amit Shah
restore_common() was shared between restore and thaw callbacks. With thaw gone, we don't need restore_common() anymore. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31virtio: drop thaw PM operationAmit Shah
The thaw operation was used by the balloon driver, but after the last commit there's no reason to have separate thaw and restore callbacks. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-31virtio: balloon: Allow stats update after restore from S4Amit Shah
There's no reason stats update after restore can't work. If a host requested for stats, and before servicing the request, the guest entered S4, upon restore, the stats request can still be processed and sent off to the host. Signed-off-by: Amit Shah <amit.shah@redhat.com>
2012-03-28Remove all #inclusions of asm/system.hDavid Howells
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
2012-03-01virtio: balloon: leak / fill balloon across S4Amit Shah
commit e562966dbaf49e7804097cd991e5d3a8934fc148 added support for S4 to the balloon driver. The freeze function did nothing to free the pages, since reclaiming the pages from the host to immediately give them back (if S4 was successful) seemed wasteful. Also, if S4 wasn't successful, the guest would have to re-fill the balloon. On restore, the pages were supposed to be marked freed and the free page counters were incremented to reflect the balloon was totally deflated. However, this wasn't done right. The pages that were earlier taken away from the guest during a balloon inflation operation were just shown as used pages after a successful restore from S4. Just a fancy way of leaking lots of memory. Instead of trying that, just leak the balloon on freeze and fill it on restore/thaw paths. This works properly now. The optimisation to not leak can be added later on after a bit of refactoring of the code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-28virtio: correct the memory barrier in virtqueue_kick_prepare()Jason Wang
Use virtio_mb() to make sure the available index to be exposed before checking the the avail event. Otherwise we may get stale value of avail event in guest and never kick the host after. Note: this fixes a bug introduced by ee7cd8981e15bcb365fc762afe3fc47b8242f630. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2012-01-28virtio: fix typos of memory barriersJason Wang
Note: this fixes a bug introduced recently in 7b21e34fd1c272e3a8c3846168f2f6287a4cd72b. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: balloon: Add freeze, restore handlers to support S4Amit Shah
Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: balloon: Move vq initialization into separate functionAmit Shah
The probe and PM restore functions will share this code. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: pci: add PM notification handlers for restore, freeze, thaw, poweroffAmit Shah
Handle thaw, restore and freeze notifications from the PM core. Expose these to individual virtio drivers that can quiesce and resume vq operations. For drivers not implementing the thaw() method, use the restore method instead. These functions also save device-specific data so that the device can be put in pre-suspend state after resume, and disable and enable the PCI device in the freeze and resume functions, respectively. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: pci: switch to new PM APIAmit Shah
The older PM API doesn't have a way to get notifications on hibernate events. Switch to the newer one that gives us those notifications. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: add debugging if driver doesn't kick.Rusty Russell
Under the existing #ifdef DEBUG, check that they don't have more than 1/10 of a second between an add_buf() and a virtqueue_notify()/virtqueue_kick_prepare() call. We could get false positives on a really busy system, but good for development. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: expose added descriptors immediately.Rusty Russell
A virtio driver does virtqueue_add_buf() multiple times before finally calling virtqueue_kick(); previously we only exposed the added buffers in the virtqueue_kick() call. This means we don't need a memory barrier in virtqueue_add_buf(), but it reduces concurrency as the device (ie. host) can't see the buffers until the kick. In the unusual (but now possible) case where a driver does add_buf() and get_buf() without doing a kick, we do need to insert one before our counter wraps. Otherwise we could wrap num_added, and later on not realize that we have passed the marker where we should have kicked. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: avoid modulus operation.Rusty Russell
Since we know vq->vring.num is a power of 2, modulus is lazy (it's asserted in vring_new_virtqueue()). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: support unlocked queue kickRusty Russell
Based on patch by Christoph for virtio_blk speedup: Split virtqueue_kick to be able to do the actual notification outside the lock protecting the virtqueue. This patch was originally done by Stefan Hajnoczi, but I can't find the original one anymore and had to recreated it from memory. Pointers to the original or corrections for the commit message are welcome. Stefan's patch was here: https://github.com/stefanha/linux/commit/a6d06644e3a58e57a774e77d7dc34c4a5a2e7496 http://www.spinics.net/lists/linux-virtualization/msg14616.html Third time's the charm! Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: rename virtqueue_add_buf_gfp to virtqueue_add_bufRusty Russell
Remove wrapper functions. This makes the allocation type explicit in all callers; I used GPF_KERNEL where it seemed obvious, left it at GFP_ATOMIC otherwise. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Christoph Hellwig <hch@lst.de>
2012-01-12virtio: document functions better.Rusty Russell
The old documentation is left over from when we used a structure with strategy pointers. And move the documentation to the C file as per kernel practice. Though I disagree... Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Christoph Hellwig <hch@lst.de>
2012-01-12virtio-balloon: Trivial cleanupsSasha Levin
Trivial changes to remove forgotten junk, format comments, and correct names. Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-12virtio: harsher barriers for rpmsg.Rusty Russell
We were cheating with our barriers; using the smp ones rather than the real device ones. That was fine, until rpmsg came along, which is used to talk to a real device (a non-SMP CPU). Unfortunately, just putting back the real barriers (reverting d57ed95d) causes a performance regression on virtio-pci. In particular, Amos reports netbench's TCP_RR over virtio_net CPU utilization increased up to 35% while throughput went down by up to 14%. By comparison, this branch is in the noise. Reference: https://lkml.org/lkml/2011/12/11/22 Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-11-24virtio-pci: make reset operation saferMichael S. Tsirkin
virtio pci device reset actually just does an I/O write, which in PCI is really posted, that is it can complete on CPU before the device has received it. Further, interrupts might have been pending on another CPU, so device callback might get invoked after reset. This conflicts with how drivers use reset, which is typically: reset unregister a callback running after reset completed can race with unregister, potentially leading to use after free bugs. Fix by flushing out the write, and flushing pending interrupts. This assumes that device is never reset from its vq/config callbacks, or in parallel with being added/removed, document this assumption. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio-mmio: Correct the name of the guest features selectorSasha Levin
Guest features selector spelling mistake. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Sasha Levin <levinsasha928@gmail.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-24virtio: add HAS_IOMEM dependency to MMIO platform bus driverHeiko Carstens
Fix this compile error on s390: CC [M] drivers/virtio/virtio_mmio.o drivers/virtio/virtio_mmio.c: In function 'vm_get_features': drivers/virtio/virtio_mmio.c:107:2: error: implicit declaration of function 'writel' Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-11-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The forcedeth changes had a conflict with the conversion over to atomic u64 statistics in net-next. The libertas cfg.c code had a conflict with the bss reference counting fix by John Linville in net-next. Conflicts: drivers/net/ethernet/nvidia/forcedeth.c drivers/net/wireless/libertas/cfg.c
2011-11-16enable virtio_net to return bus_info in ethtool -i consistent with emulated NICsRick Jones
Add a new .bus_name to virtio_config_ops then modify virtio_net to call through to it in an ethtool .get_drvinfo routine to report bus_info in ethtool -i output which is consistent with other emulated NICs and the output of lspci. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14virtio-pci: fix use after freeMichael S. Tsirkin
Commit 31a3ddda166cda86d2b5111e09ba4bda5239fae6 introduced a use after free in virtio-pci. The main issue is that the release method signals removal of the virtio device, while remove signals removal of the pci device. For example, on driver removal or hot-unplug, virtio_pci_release_dev is called before virtio_pci_remove. We then might get a crash as virtio_pci_remove tries to use the device freed by virtio_pci_release_dev. We allocate/free all resources together with the pci device, so we can leave the release method empty. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-02virtio: Add platform bus driver for memory mapped virtio devicePawel Moll
This patch, based on virtio PCI driver, adds support for memory mapped (platform) virtio device. This should allow environments like qemu to use virtio-based block & network devices even on platforms without PCI support. One can define and register a platform device which resources will describe memory mapped control registers and "mailbox" interrupt. Such device can be also instantiated using the Device Tree node with compatible property equal "virtio,mmio". Cc: Anthony Liguori <aliguori@us.ibm.com> Cc: Michael S.Tsirkin <mst@redhat.com> Signed-off-by: Pawel Moll <pawel.moll@arm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>