summaryrefslogtreecommitdiffstats
path: root/drivers/video
AgeCommit message (Collapse)Author
2013-02-27backlight: add new lp8788 backlight driverKim, Milo
TI LP8788 PMU supports regulators, battery charger, RTC, ADC, backlight dri= ver and current sinks. This patch enables LP8788 backlight module. (Brightness mode) The brightness is controlled by PWM input or I2C register. All modes are supported in the driver. (Platform data) Configurable data can be defined in the platform side. name : backlight driver name. (default: "lcd-backlight") initial_brightness : initial value of backlight brightness bl_mode : brightness control by PWM or lp8788 register dim_mode : dimming mode selection full_scale : full scale current setting rise_time : brightness ramp up step time fall_time : brightness ramp down step time pwm_pol : PWM polarity setting when bl_mode is PWM based period_ns : platform specific PWM period value. unit is nano. The default values are set in case no platform data is defined. [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: "devendra.aaru" <devendra.aaru@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27drivers/video/backlight/ams369fg06.c: make power_on() call optionalJingoo Han
This patch makes power_on() call optional. The voltage source can be provided to some boards using ams369fg06 panel, thus in this case, power on/off sequence is not necessary. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull PWM changes from Thierry Reding: "A new driver has been added to support the PWM mode of the timer counter blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained suspend and resume functionality. User drivers can now query the core for whether access to a PWM device will sleep (if the PWM chip is on a slow bus such as I2C or SPI). The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state in addition to the FB layer's blanking states. To round things off, a few fixes and cleanups are also included" * tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm: pwm: twl: Use to_twl() instead of container_of() pwm: tegra: assume CONFIG_OF pwm_backlight: Validate dft_brightness in main probe function pwm: Export pwm_{set,get}_chip_data() pwm: Make Kconfig entries more consistent pwm: Add can_sleep property to drivers pwm: Add pwm_can_sleep() as exported API to users pwm-backlight: handle BL_CORE_FBBLANK state pwm: pwm-tiecap: Low power sleep support pwm: pwm-tiehrpwm: Low power sleep support pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver pwm: vt8500: Add polarity support pwm: vt8500: Register write busy test performed incorrectly pwm: atmel: add Timer Counter Block PWM driver
2013-02-25Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm merge from Dave Airlie: "Highlights: - TI LCD controller KMS driver - TI OMAP KMS driver merged from staging - drop gma500 stub driver - the fbcon locking fixes - the vgacon dirty like zebra fix. - open firmware videomode and hdmi common code helpers - major locking rework for kms object handling - pageflip/cursor won't block on polling anymore! - fbcon helper and prime helper cleanups - i915: all over the map, haswell power well enhancements, valleyview macro horrors cleaned up, killing lots of legacy GTT code, - radeon: CS ioctl unification, deprecated UMS support, gpu reset rework, VM fixes - nouveau: reworked thermal code, external dp/tmds encoder support (anx9805), fences sleep instead of polling, - exynos: all over the driver fixes." Lovely conflict in radeon/evergreen_cs.c between commit de0babd60d8d ("drm/radeon: enforce use of radeon_get_ib_value when reading user cmd") and the new changes that modified that evergreen_dma_cs_parse() function. * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (508 commits) drm/tilcdc: only build on arm drm/i915: Revert hdmi HDP pin checks drm/tegra: Add list of framebuffers to debugfs drm/tegra: Fix color expansion drm/tegra: Split DC_CMD_STATE_CONTROL register write drm/tegra: Implement page-flipping support drm/tegra: Implement VBLANK support drm/tegra: Implement .mode_set_base() drm/tegra: Add plane support drm/tegra: Remove bogus tegra_framebuffer structure drm: Add consistency check for page-flipping drm/radeon: Use generic HDMI infoframe helpers drm/tegra: Use generic HDMI infoframe helpers drm: Add EDID helper documentation drm: Add HDMI infoframe helpers video: Add generic HDMI infoframe helpers drm: Add some missing forward declarations drm: Move mode tables to drm_edid.c drm: Remove duplicate drm_mode_cea_vic() gma500: Fix n, m1 and m2 clock limits for sdvo and lvds ...
2013-02-24Merge tag 'mfd-3.9-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFS updates from Samuel Ortiz: "This is the MFD pull request for the 3.9 merge window. No new drivers this time, but a bunch of fairly big cleanups: - Roger Quadros worked on a OMAP USBHS and TLL platform data consolidation, OMAP5 support and clock management code cleanup. - The first step of a major sync for the ab8500 driver from Lee Jones. In particular, the debugfs and the sysct interfaces got extended and improved. - Peter Ujfalusi sent a nice patchset for cleaning and fixing the twl-core driver, with a much needed module id lookup code improvement. - The regular wm5102 and arizona cleanups and fixes from Mark Brown. - Laxman Dewangan extended the palmas APIs in order to implement the palmas GPIO and rt drivers. - Laxman also added DT support for the tps65090 driver. - The Intel SCH and ICH drivers got a couple fixes from Aaron Sierra and Darren Hart. - Linus Walleij patchset for the ab8500 driver allowed ab8500 and ab9540 based devices to switch to the new abx500 pin-ctrl driver. - The max8925 now has device tree and irqdomain support thanks to Qing Xu. - The recently added rtsx driver got a few cleanups and fixes for a better card detection code path and now also supports the RTS5227 chipset, thanks to Wei Wang and Roger Tseng." * tag 'mfd-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (109 commits) mfd: lpc_ich: Use devres API to allocate private data mfd: lpc_ich: Add Device IDs for Intel Wellsburg PCH mfd: lpc_sch: Accomodate partial population of the MFD devices mfd: da9052-i2c: Staticize da9052_i2c_fix() mfd: syscon: Fix sparse warning mfd: twl-core: Fix kernel panic on boot mfd: rtsx: Fix issue that booting OS with SD card inserted mfd: ab8500: Fix compile error mfd: Add missing GENERIC_HARDIRQS dependecies Documentation: Add docs for max8925 dt mfd: max8925: Add dts mfd: max8925: Support dt for backlight mfd: max8925: Fix onkey driver irq base mfd: max8925: Fix mfd device register failure mfd: max8925: Add irqdomain for dt mfd: vexpress: Allow vexpress-sysreg to self-initialise mfd: rtsx: Support RTS5227 mfd: rtsx: Implement driving adjustment to device-dependent callbacks mfd: vexpress: Add pseudo-GPIO based LEDs mfd: ab8500: Rename ab8500 to abx500 for hwmon driver ...
2013-02-23Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "So from the depth of frozen Minnesota, here's the powerpc pull request for 3.9. It has a few interesting highlights, in addition to the usual bunch of bug fixes, minor updates, embedded device tree updates and new boards: - Hand tuned asm implementation of SHA1 (by Paulus & Michael Ellerman) - Support for Doorbell interrupts on Power8 (kind of fast thread-thread IPIs) by Ian Munsie - Long overdue cleanup of the way we handle relocation of our open firmware trampoline (prom_init.c) on 64-bit by Anton Blanchard - Support for saving/restoring & context switching the PPR (Processor Priority Register) on server processors that support it. This allows the kernel to preserve thread priorities established by userspace. By Haren Myneni. - DAWR (new watchpoint facility) support on Power8 by Michael Neuling - Ability to change the DSCR (Data Stream Control Register) which controls cache prefetching on a running process via ptrace by Alexey Kardashevskiy - Support for context switching the TAR register on Power8 (new branch target register meant to be used by some new specific userspace perf event interrupt facility which is yet to be enabled) by Ian Munsie. - Improve preservation of the CFAR register (which captures the origin of a branch) on various exception conditions by Paulus. - Move the Bestcomm DMA driver from arch powerpc to drivers/dma where it belongs by Philippe De Muyter - Support for Transactional Memory on Power8 by Michael Neuling (based on original work by Matt Evans). For those curious about the feature, the patch contains a pretty good description." (See commit db8ff907027b: "powerpc: Documentation for transactional memory on powerpc" for the mentioned description added to the file Documentation/powerpc/transactional_memory.txt) * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (140 commits) powerpc/kexec: Disable hard IRQ before kexec powerpc/85xx: l2sram - Add compatible string for BSC9131 platform powerpc/85xx: bsc9131 - Correct typo in SDHC device node powerpc/e500/qemu-e500: enable coreint powerpc/mpic: allow coreint to be determined by MPIC version powerpc/fsl_pci: Store the pci ctlr device ptr in the pci ctlr struct powerpc/85xx: Board support for ppa8548 powerpc/fsl: remove extraneous DIU platform functions arch/powerpc/platforms/85xx/p1022_ds.c: adjust duplicate test powerpc: Documentation for transactional memory on powerpc powerpc: Add transactional memory to pseries and ppc64 defconfigs powerpc: Add config option for transactional memory powerpc: Add transactional memory to POWER8 cpu features powerpc: Add new transactional memory state to the signal context powerpc: Hook in new transactional memory code powerpc: Routines for FP/VSX/VMX unavailable during a transaction powerpc: Add transactional memory unavaliable execption handler powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes powerpc: Add FP/VSX and VMX register load functions for transactional memory powerpc: Add helper functions for transactional memory context switching ...
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22video: Add generic HDMI infoframe helpersThierry Reding
Add generic helpers to pack HDMI infoframes into binary buffers. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2013-02-21Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge misc patches from Andrew Morton: - Florian has vanished so I appear to have become fbdev maintainer again :( - Joel and Mark are distracted to welcome to the new OCFS2 maintainer - The backlight queue - Small core kernel changes - lib/ updates - The rtc queue - Various random bits * akpm: (164 commits) rtc: rtc-davinci: use devm_*() functions rtc: rtc-max8997: use devm_request_threaded_irq() rtc: rtc-max8907: use devm_request_threaded_irq() rtc: rtc-da9052: use devm_request_threaded_irq() rtc: rtc-wm831x: use devm_request_threaded_irq() rtc: rtc-tps80031: use devm_request_threaded_irq() rtc: rtc-lp8788: use devm_request_threaded_irq() rtc: rtc-coh901331: use devm_clk_get() rtc: rtc-vt8500: use devm_*() functions rtc: rtc-tps6586x: use devm_request_threaded_irq() rtc: rtc-imxdi: use devm_clk_get() rtc: rtc-cmos: use dev_warn()/dev_dbg() instead of printk()/pr_debug() rtc: rtc-pcf8583: use dev_warn() instead of printk() rtc: rtc-sun4v: use pr_warn() instead of printk() rtc: rtc-vr41xx: use dev_info() instead of printk() rtc: rtc-rs5c313: use pr_err() instead of printk() rtc: rtc-at91rm9200: use dev_dbg()/dev_err() instead of printk()/pr_debug() rtc: rtc-rs5c372: use dev_dbg()/dev_warn() instead of printk()/pr_debug() rtc: rtc-ds2404: use dev_err() instead of printk() rtc: rtc-efi: use dev_err()/dev_warn()/pr_err() instead of printk() ...
2013-02-21backlight: lp855x_bl: simplify bl_get_brightness()Kim, Milo
Getting the brightness value is not critical, no need to read the actual register value. To simplify it, just return the 'bl->props.brightness' value. Then, lp855x_read_byte() can be removed, not used any more. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lp855x_bl: support new LP8557 deviceKim, Milo
LP8557 is one of LP855x family device, but it has different register map and initialization process. To support this device, device specific configuration is done through the lp855x_device_config structure. Few register definitions are fixed for better readability. BRIGHTNESS_CTRL -> LP855X_BRIGHTNESS_CTRL DEVICE_CTRL -> LP855X_DEVICE_CTRL EEPROM_START -> LP855X_EEPROM_START EEPROM_END -> LP855X_EEPROM_END EPROM_START -> LP8556_EPROM_START EPROM_END -> LP8556_EPROM_END And LP8557 register definitions are added. New register function, lp855x_update_bit() is added. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lp855x_bl: introduce device configuration flowKim, Milo
At this moment, LP855x device driver has fixed register configuration. For example, fixed register addresses and values are set on the device initialization. But new device of LP855x family, LP8557 has different register map and initialization sequence. To support new device architecture, initialization process should be changed. Introduce new structure: lp855x_device_config ============================================= With lp855x_device_config, device specific features are configurable. Use configurable function calls and register addresses rather than fixed values. Change on device initialization =============================== In old LP855x driver architecture, the device initialization was simple. - Just update the brightness/device control register/ROM area(optional). In new LP855x driver architecture, two more works are added - pre_init and post_init. Those init functions are optional, used for new device LP8557. New device initialization flow: generic sequence ================================================= 1) pre_init_device() 2) update the brightness register 3) update the device control register 4) update ROM area if need 5) post_init_device() Name change =========== Use generic name 'lp855x_configure()' instead of 'lp855x_init_registers()'. Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/adp88?0_bl.c: fix resumeLars-Peter Clausen
Clearing the NSTBY bit in the control register also automatically clears the BLEN bit. So we need to make sure to set it again during resume, otherwise the backlight will stay off. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/lm3630_bl.c: remove ret = -EIO of ↵Jingoo Han
lm3630_backlight_register() There is no need to return -EIO, because backlight_device_register() already returns correct error values. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Daniel Jeong <daniel.jeong@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/s6e63m0.c: report ->gamma_table_count correctlyDan Carpenter
gamma_table has 3 arrays which each hold MAX_GAMMA_LEVEL pointers to int. The current code sets ->gamma_table_count to 6 on 64bit arches and to 3 on 32 bit arches. It should be 3 on everything. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/88pm860x_bl.c: add missing of_node_put()Axel Lin
of_find_node_by_name() returns a node pointer with refcount incremented, use of_node_put() on it when done. of_find_node_by_name() will call of_node_put() against the node pass to from parameter, thus we also need to call of_node_get(from) before calling of_find_node_by_name(). Signed-off-by: Axel Lin <axel.lin@ingics.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: add an AS3711 PMIC backlight driverGuennadi Liakhovetski
This is an initial commit of a backlight driver, using step-up DCDC power supplies on AS3711 PMIC. Only one mode has actually been tested, several further modes have been implemented "dry," but disabled to avoid accidental hardware damage. Anyone wishing to use any of those modes will have to modify the driver. Tested on sh73a0-based kzm9g board. Only one mode has been tested and is enabled. That mode copies the sample code from the manufacturer. Deviations from that code proved to be fatal for the hardware... Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/Makefile: cleanupAndrew Morton
Fix up indenting. Also alphasort all entries, which reduces patch collisions. Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21fb: backlight: add the Himax HX-8357B LCD controllerMaxime Ripard
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Brian Lilly <brian@crystalfontz.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/ld9040.c: use devm_regulator_bulk_get() APISachin Kamat
devm_regulator_bulk_get is device managed and saves some cleanup and exit code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/l4f00242t03.c: convert to devm_regulator_get()Axel Lin
Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21drivers/video/backlight/lm3639_bl.c: remove ret = -EIO at error paths of probeDevendra Naga
The APIs are returning correctly the err codes, no need to assign -EIO to the ret again. Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Daniel Jeong <daniel.jeong@ti.com> Cc: G.Shark Jeong <gshark.jeong@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: corgi_lcd: use lcd_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using lcd_device instead of using dev_get_drvdata with &ld->dev, so we can directly pass a struct lcd_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: omap1: use bl_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: tosa: use bl_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: corgi_lcd: use bl_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: use bl_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21pwm_backlight: use bl_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: aat2870: use bl_get_data instead of dev_get_drvdataJingoo Han
Use the wrapper function for getting the driver data using backlight_device instead of using dev_get_drvdata with &bd->dev, so we can directly pass a struct backlight_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lms501kf03: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: corgi_lcd: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: tosa: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: vgg2432a4: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: lms283gf05: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: tdo24m: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ltv350qv: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ld9040: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: l4f00242t03: use spi_get_drvdata and spi_set_drvdataJingoo Han
Use the wrapper functions for getting and setting the driver data using spi_device instead of using dev_{get|set}_drvdata with &spi->dev, so we can directly pass a struct spi_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: reorder inclusions of <linux/xxx.h>Jingoo Han
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: remove redundant variable 'before_power'Jingoo Han
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: replace EFAULT with EINVALJingoo Han
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: remove unnecessary NULL deference checkJingoo Han
Remove unnecessary NULL deference check, because it was already checked in ams369fg06_probe(). Also, unnecessary parentheses are removed in ams369fg06_power_is_on(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: ams369fg06: use sleep instead of delayJingoo Han
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: reorder inclusions of <linux/xxx.h>Jingoo Han
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: remove redundant variable 'before_power'Jingoo Han
'before_power' was used to check the previous status when resume() is called. However, FB_BLANK_POWERDOWN was used in suspend() all the time, so there is no need to check the previous status. Also, redundant return variables are removed to reduce the code. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: replace EFAULT with EINVALJingoo Han
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21backlight: s6e63m0: remove unnecessary NULL deference checkJingoo Han
Remove unnecessary NULL deference check, because it was already checked in s6e63m0_probe(). Also, POWER_IS_ON is replaced with s6e63m0_power_is_on(). Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>