summaryrefslogtreecommitdiffstats
path: root/drivers/vhost
AgeCommit message (Collapse)Author
2012-05-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-05-11vhost-net: fix handle_rx buffer sizeBasil Gor
Take vlan header length into account, when vlan id is stored as vlan_tci. Otherwise tagged packets coming from macvtap will be truncated. Signed-off-by: Basil Gor <basil.gor@gmail.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-02vhost: zerocopy: poll vq in zerocopy callbackJason Wang
We add used and signal guest in worker thread but did not poll the virtqueue during the zero copy callback. This may lead the missing of adding and signalling during zerocopy. Solve this by polling the virtqueue and let it wakeup the worker during callback. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-02vhost_net: zerocopy: adding and signalling immediately when fully copiedJason Wang
When a packet were fully copied in zerocopy, we don't wait for the DMA done to mark the done flag, so after the packet were passed to lower device, we need to add used and signal guest immediately. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-02vhost_net: re-poll only on EAGAIN or ENOBUFSJason Wang
Currently, we restart tx polling unconditionally when sendmsg() fails. This would cause unnecessary wakeups of vhost wokers and waste cpu utlization when evil userspace(guest driver) is able to hit EFAULT or EINVAL. The polling is only needed when the socket send buffer were exceeded or not enough memory. So fix this by restarting polling only when sendmsg() returns EAGAIN/ENOBUFS. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-05-02vhost_net: zerocopy: fix possible NULL pointer dereference of vq->bufsJason Wang
When we want to disable vhost_net backend while there's a tx work, a possible NULL pointer defernece may happen we we try to deference the vq->bufs after vhost_net_set_backend() assign a NULL to it. As suggested by Michael, fix this by checking the vq->bufs instead of vhost_sock_zcopy(). Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-04-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix namespace init and cleanup in phonet to fix some oopses, from Eric W. Biederman. 2) Missing kfree_skb() in AF_KEY, from Julia Lawall. 3) Refcount leak and source address handling fix in l2tp from James Chapman. 4) Memory leak fix in CAIF from Tomasz Gregorek. 5) When routes are cloned from ipv6 addrconf routes, we don't process expirations properly. Fix from Gao Feng. 6) Fix panic on DMA errors in atl1 driver, from Tony Zelenoff. 7) Only enable interrupts in 8139cp driver after we've registered the IRQ handler. From Jason Wang. 8) Fix too many reads of KS_CIDER register in ks8851 during probe, fixing crashes on spurious interrupts. From Matt Renzelmann. 9) Missing include in ath5k driver and missing iounmap on probe failure, from Jonathan Bither. 10) Fix RX packet handling in smsc911x driver, from Will Deacon. 11) Fix ixgbe WoL on fiber by leaving the laser on during shutdown. 12) ks8851 needs MAX_RECV_FRAMES increased otherwise the internal MAC buffers are easily overflown. Fix from Davide Cimingahi. 13) Fix memory leaks in peak_usb CAN driver, from Jesper Juhl. 14) gred packet scheduler can dump in WRED more when doing a netlink dump. Fix from David Ward. 15) Fix MTU in USB smsc75xx driver, from Stephane Fillod. 16) Dummy device needs ->ndo_uninit handler to properly handle ->ndo_init failures. From Hiroaki SHIMODA. 17) Fix TX fragmentation in ath9k driver, from Sujith Manoharan. 18) Missing RTNL lock in ixgbe PM resume, from Benjamin Poirier. 19) Missing iounmap in farsync WAN driver, from Julia Lawall. 20) With LRO/GRO, tcp_grow_window() is easily tricked into not growing the receive window properly, and this hurts performance. Fix from Eric Dumazet. 21) Network namespace init failure can leak net_generic data, fix from Julian Anastasov. 22) Fix skb_over_panic due to mis-accounting in TCP for partially ACK'd SKBs. From Eric Dumazet. 23) New IDs for qmi_wwan driver, from Bjørn Mork. 24) Fix races in ax25_exit(), from Eric W. Biederman. 25) IPV6 TCP doesn't handle TCP_MAXSEG socket option properly, copy over logic from the IPV4 side. From Neal Cardwell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits) tcp: fix TCP_MAXSEG for established IPv6 passive sockets drivers/net: Do not free an IRQ if its request failed drop_monitor: allow more events per second ks8851: Fix request_irq/free_irq mismatch net/hyperv: Adding cancellation to ensure rndis filter is closed ks8851: Fix mutex deadlock in ks8851_net_stop() net ax25: Reorder ax25_exit to remove races. icplus: fix interrupt for IC+ 101A/G and 1001LF net: qmi_wwan: support Sierra Wireless MC77xx devices in QMI mode bnx2x: off by one in bnx2x_ets_e3b0_sp_pri_to_cos_set() ksz884x: don't copy too much in netdev_set_mac_address() tcp: fix retransmit of partially acked frames netns: do not leak net_generic data on failed init net/sock.h: fix sk_peek_off kernel-doc warning tcp: fix tcp_grow_window() for large incoming frames drivers/net/wan/farsync.c: add missing iounmap davinci_mdio: Fix MDIO timeout check ipv6: clean up rt6_clean_expires ipv6: fix rt6_update_expires arcnet: rimi: Fix device name in debug output ...
2012-04-13skbuff: struct ubuf_info callback type safetyMichael S. Tsirkin
The skb struct ubuf_info callback gets passed struct ubuf_info itself, not the arg value as the field name and the function signature seem to imply. Rename the arg field to ctx to match usage, add documentation and change the callback argument type to make usage clear and to have compiler check correctness. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12tools/virtio: fix up vhost/test module buildZhi Yong Wu
commit ea5d404655ba3b356d0c06d6a3c4f24112124522 broke build for the vhost test module used by tools/virtio. Fix it up. Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-03-23Merge branch 'vhost-net' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2012-03-20vhost: remove the second argument of k[un]map_atomic()Cong Wang
Signed-off-by: Cong Wang <amwang@redhat.com>
2012-02-28vhost: fix release path lockdep checksMichael S. Tsirkin
We shouldn't hold any locks on release path. Pass a flag to vhost_dev_cleanup to use the lockdep info correctly. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Sasha Levin <levinsasha928@gmail.com>
2012-02-28vhost: don't forget to schedule()Nadav Har'El
This is a tiny, but important, patch to vhost. Vhost's worker thread only called schedule() when it had no work to do, and it wanted to go to sleep. But if there's always work to do, e.g., the guest is running a network-intensive program like netperf with small message sizes, schedule() was *never* called. This had several negative implications (on non-preemptive kernels): 1. Passing time was not properly accounted to the "vhost" process (ps and top would wrongly show it using zero CPU time). 2. Sometimes error messages about RCU timeouts would be printed, if the core running the vhost thread didn't schedule() for a very long time. 3. Worst of all, a vhost thread would "hog" the core. If several vhost threads need to share the same core, typically one would get most of the CPU time (and its associated guest most of the performance), while the others hardly get any work done. The trivial solution is to add if (need_resched()) schedule(); After doing every piece of work. This will not do the heavy schedule() all the time, just when the timer interrupt decided a reschedule is warranted (so need_resched returns true). Thanks to Abel Gordon for this patch. Signed-off-by: Nadav Har'El <nyh@il.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2012-01-13vhost-net: add module alias (v2.1)stephen hemminger
By adding some module aliases, programs (or users) won't have to explicitly call modprobe. Vhost-net will always be available if built into the kernel. It does require assigning a permanent minor number for depmod to work. Also: - use C99 style initialization. - add missing entry in documentation for loop-control Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-By: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-21vhost: handle wrap around in # of bufs mathShirley Ma
The meth for calculating the # of outstanding buffers gives incorrect results when vq->upend_idx wraps around zero. Fix that. Signed-off-by: Shirley Ma <xma@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-21vhost-net: update used ring on backend changeMichael S. Tsirkin
On backend change, we flushed out outstanding skbs but forgot to update the used ring, so that done entries were left in the ubuf_info ring. As a result we lose heads or complete incorrect ones, crashing the guest or leaking memory. Fix by updating the used ring. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19vhost: optimize interrupt enable/disableMichael S. Tsirkin
As we now only update used ring after enabling the backend, we can write flags with __put_user: as that's done on data path, it matters. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19vhost: fix zcopy reference countingMichael S. Tsirkin
Fix get/put refcount imbalance with zero copy, which caused qemu to hang forever on guest driver unload. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19vhost: set log when updating used flags or avail eventJason Wang
We need to log writes when updating used flags and avail event fields. Otherwise the guest may see a stale value after migration and miss notifying the host. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-19vhost: init used ring after backend was setJason Wang
Move the used ring initialization after backend was set. This makes it possible to disable the backend and tweak the used ring, then restart. This will also make it possible to log the used ring write correctly. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-07-18vhost: vhost TX zero-copy supportMichael S. Tsirkin
>From: Shirley Ma <mashirle@us.ibm.com> This adds experimental zero copy support in vhost-net, disabled by default. To enable, set experimental_zcopytx module option to 1. This patch maintains the outstanding userspace buffers in the sequence it is delivered to vhost. The outstanding userspace buffers will be marked as done once the lower device buffers DMA has finished. This is monitored through last reference of kfree_skb callback. Two buffer indices are used for this purpose. The vhost-net device passes the userspace buffers info to lower device skb through message control. DMA done status check and guest notification are handled by handle_tx: in the worst case is all buffers in the vq are in pending/done status, so we need to notify guest to release DMA done buffers first before we get any new buffers from the vq. One known problem is that if the guest stops submitting buffers, buffers might never get used until some further action, e.g. device reset. This does not seem to affect linux guests. Signed-off-by: Shirley <xma@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-30vhost: support event indexMichael S. Tsirkin
Support the new event index feature. When acked, utilize it to reduce the # of interrupts sent to the guest. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-05-06Correct occurrences ofRob Landley
- Documentation/kvm/ to Documentation/virtual/kvm - Documentation/uml/ to Documentation/virtual/uml - Documentation/lguest/ to Documentation/virtual/lguest throughout the kernel source tree. Signed-off-by: Rob Landley <rob@landley.net> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
2011-03-13vhost-net: remove unlocked use of receive_queueMichael S. Tsirkin
Use of skb_queue_empty(&sock->sk->sk_receive_queue) without taking the sk_receive_queue.lock is unsafe or useless. Take it out. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13vhost: lock receive queue, not the socketJason Wang
vhost takes a sock lock to try and prevent the skb from being pulled from the receive queue after skb_peek. However this is not the right lock to use for that, sk_receive_queue.lock is. Fix that up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13vhost-net: Unify the code of mergeable and big buffer handlingJason Wang
Codes duplication were found between the handling of mergeable and big buffers, so this patch tries to unify them. This could be easily done by adding a quota to the get_rx_bufs() which is used to limit the number of buffers it returns (for mergeable buffer, the quota is simply UIO_MAXIOV, for big buffers, the quota is just 1), and then the previous handle_rx_mergeable() could be resued also for big buffers. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-13vhost-net: check the support of mergeable buffer outside the receive loopJason Wang
No need to check the support of mergeable buffer inside the recevie loop as the whole handle_rx()_xx is in the read critical region. So this patch move it ahead of the receiving loop. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-08vhost: copy_from_user -> __copy_from_userMichael S. Tsirkin
copy_from_user is pretty high on perf top profile, replacing it with __copy_from_user helps. It's also safe because we do access_ok checks during setup. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-03-08vhost: Cleanup vhost.c and net.cKrishna Kumar
Minor cleanup of vhost.c and net.c to match coding style. Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-02-01vhost: rcu annotation fixupMichael S. Tsirkin
When built with rcu checks enabled, vhost triggers bogus warnings as vhost features are read without dev->mutex sometimes, and private pointer is read with our kind of rcu where work serves as a read side critical section. Fixing it properly is not trivial. Disable the warnings by stubbing out the checks for now. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-10vhost: fix signed/unsigned comparisonMichael S. Tsirkin
To detect that a sequence number is done, we are doing math on unsigned integers so the result is unsigned too. Not what was intended for the <= comparison. The result is user stuck forever in flush call. Convert to int to fix this. Further, get rid of ({}) to make code clearer. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-14Merge branch 'vhost-net-next' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-12-09vhost test moduleMichael S. Tsirkin
This adds a test module for vhost infrastructure. Intentionally not tied to kbuild to prevent people from installing and loading it accidentally. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09vhost: better variable name in loggingMichael S. Tsirkin
We really store a page offset in write_address, so rename it write_page to avoid confusion. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09vhost: correctly set bits of dirty pagesMichael S. Tsirkin
Fix two bugs in dirty page logging: When counting pages we should increase address by 1 instead of VHOST_PAGE_SIZE. Make log_write() correctly process requests that cross pages with write_address not starting at page boundary. Reported-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09vhost: fix typos in commentJason Wang
Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-12-09vhost: remove unused includeMichael S. Tsirkin
vhost.c does not need to know about sockets, don't include sock.h Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-25vhost/net: fix rcu check usageMichael S. Tsirkin
Incorrect rcu check was used as rcu isn't done under mutex here. Force check to 1 for now, to stop it from complaining. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04vhost: get/put_user -> __get/__put_userMichael S. Tsirkin
We do access_ok checks on all ring values on an ioctl, so we don't need to redo them on each access. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04vhost: copy_to_user -> __copy_to_userMichael S. Tsirkin
We do access_ok checks at setup time, so we don't need to redo them on each access. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04vhost-net: batch use/unuse mmMichael S. Tsirkin
Move use/unuse mm to vhost.c which makes it possible to batch these operations. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-11-04vhost: put mm after thread stopMichael S. Tsirkin
makes it possible to batch use/unuse mm Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-26drivers/vhost/vhost.c: delete double assignmentJulia Lawall
Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1699 commits) bnx2/bnx2x: Unsupported Ethtool operations should return -EINVAL. vlan: Calling vlan_hwaccel_do_receive() is always valid. tproxy: use the interface primary IP address as a default value for --on-ip tproxy: added IPv6 support to the socket match cxgb3: function namespace cleanup tproxy: added IPv6 support to the TPROXY target tproxy: added IPv6 socket lookup function to nf_tproxy_core be2net: Changes to use only priority codes allowed by f/w tproxy: allow non-local binds of IPv6 sockets if IP_TRANSPARENT is enabled tproxy: added tproxy sockopt interface in the IPV6 layer tproxy: added udp6_lib_lookup function tproxy: added const specifiers to udp lookup functions tproxy: split off ipv6 defragmentation to a separate module l2tp: small cleanup nf_nat: restrict ICMP translation for embedded header can: mcp251x: fix generation of error frames can: mcp251x: fix endless loop in interrupt handler if CANINTF_MERRF is set can-raw: add msg_flags to distinguish local traffic 9p: client code cleanup rds: make local functions/variables static ... Fix up conflicts in net/core/dev.c, drivers/net/pcmcia/smc91c92_cs.c and drivers/net/wireless/ath/ath9k/debug.c as per David
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: net/core/dev.c
2010-10-15llseek: automatically add .llseek fopArnd Bergmann
All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-10-12vhost: fix return code for log_access_ok()Dan Carpenter
access_ok() returns 1 if it's OK otherwise it should return 0. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-07Merge commit 'v2.6.36-rc7' into core/rcuIngo Molnar
Merge reason: Update from -rc3 to -rc7. Signed-off-by: Ingo Molnar <mingo@elte.hu>