summaryrefslogtreecommitdiffstats
path: root/drivers/vfio
AgeCommit message (Collapse)Author
2013-10-11VFIO: vfio_iommu_type1: fix bug caused by break in nested loopAntonios Motakis
In vfio_iommu_type1.c there is a bug in vfio_dma_do_map, when checking that pages are not already mapped. Since the check is being done in a for loop nested within the main loop, breaking out of it does not create the intended behavior. If the underlying IOMMU driver returns a non-NULL value, this will be ignored and mapping the DMA range will be attempted anyway, leading to unpredictable behavior. This interracts badly with the ARM SMMU driver issue fixed in the patch that was submitted with the title: "[PATCH 2/2] ARM: SMMU: return NULL on error in arm_smmu_iova_to_phys" Both fixes are required in order to use the vfio_iommu_type1 driver with an ARM SMMU. This patch refactors the function slightly, in order to also make this kind of bug less likely. Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-09-04vfio-pci: PCI hot reset interfaceAlex Williamson
The current VFIO_DEVICE_RESET interface only maps to PCI use cases where we can isolate the reset to the individual PCI function. This means the device must support FLR (PCIe or AF), PM reset on D3hot->D0 transition, device specific reset, or be a singleton device on a bus for a secondary bus reset. FLR does not have widespread support, PM reset is not very reliable, and bus topology is dictated by the system and device design. We need to provide a means for a user to induce a bus reset in cases where the existing mechanisms are not available or not reliable. This device specific extension to VFIO provides the user with this ability. Two new ioctls are introduced: - VFIO_DEVICE_PCI_GET_HOT_RESET_INFO - VFIO_DEVICE_PCI_HOT_RESET The first provides the user with information about the extent of devices affected by a hot reset. This is essentially a list of devices and the IOMMU groups they belong to. The user may then initiate a hot reset by calling the second ioctl. We must be careful that the user has ownership of all the affected devices found via the first ioctl, so the second ioctl takes a list of file descriptors for the VFIO groups affected by the reset. Each group must have IOMMU protection established for the ioctl to succeed. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-09-04vfio-pci: Test for extended config spaceAlex Williamson
Having PCIe/PCI-X capability isn't enough to assume that there are extended capabilities. Both specs define that the first capability header is all zero if there are no extended capabilities. Testing for this avoids an erroneous message about hiding capability 0x0 at offset 0x100. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-28vfio-pci: Use fdget() rather than eventfd_fget()Alex Williamson
eventfd_fget() tests to see whether the file is an eventfd file, which we then immediately pass to eventfd_ctx_fileget(), which again tests whether the file is an eventfd file. Simplify slightly by using fdget() so that we only test that we're looking at an eventfd once. fget() could also be used, but fdget() makes use of fget_light() for another slight optimization. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-22vfio: Add O_CLOEXEC flag to vfio device fdAlex Williamson
Add the default O_CLOEXEC flag for device file descriptors. This is generally considered a safer option as it allows the user a race free option to decide whether file descriptors are inherited across exec, with the default avoiding file descriptor leaks. Reported-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-22vfio: use get_unused_fd_flags(0) instead of get_unused_fd()Yann Droneaud
Macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Instead of macro get_unused_fd(), functions anon_inode_getfd() or get_unused_fd_flags() should be used with flags given by userspace. If not possible, flags should be set to O_CLOEXEC to provide userspace with a default safe behavor. In a further patch, get_unused_fd() will be removed so that new code start using anon_inode_getfd() or get_unused_fd_flags() with correct flags. This patch replaces calls to get_unused_fd() with equivalent call to get_unused_fd_flags(0) to preserve current behavor for existing code. The hard coded flag value (0) should be reviewed on a per-subsystem basis, and, if possible, set to O_CLOEXEC. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Link: http://lkml.kernel.org/r/cover.1376327678.git.ydroneaud@opteya.com Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-08-05vfio: add external user supportAlexey Kardashevskiy
VFIO is designed to be used via ioctls on file descriptors returned by VFIO. However in some situations support for an external user is required. The first user is KVM on PPC64 (SPAPR TCE protocol) which is going to use the existing VFIO groups for exclusive access in real/virtual mode on a host to avoid passing map/unmap requests to the user space which would made things pretty slow. The protocol includes: 1. do normal VFIO init operation: - opening a new container; - attaching group(s) to it; - setting an IOMMU driver for a container. When IOMMU is set for a container, all groups in it are considered ready to use by an external user. 2. User space passes a group fd to an external user. The external user calls vfio_group_get_external_user() to verify that: - the group is initialized; - IOMMU is set for it. If both checks passed, vfio_group_get_external_user() increments the container user counter to prevent the VFIO group from disposal before KVM exits. 3. The external user calls vfio_external_user_iommu_id() to know an IOMMU ID. PPC64 KVM uses it to link logical bus number (LIOBN) with IOMMU ID. 4. When the external KVM finishes, it calls vfio_group_put_external_user() to release the VFIO group. This call decrements the container user counter. Everything gets released. The "vfio: Limit group opens" patch is also required for the consistency. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-24vfio-pci: Avoid deadlock on removeAlex Williamson
If an attempt is made to unbind a device from vfio-pci while that device is in use, the request is blocked until the device becomes unused. Unfortunately, that unbind path still grabs the device_lock, which certain things like __pci_reset_function() also want to take. This means we need to try to acquire the locks ourselves and use the pre-locked version, __pci_reset_function_locked(). Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-24vfio: Ignore sprurious notifiesAlex Williamson
Remove debugging WARN_ON if we get a spurious notify for a group that no longer exists. No reports of anyone hitting this, but it would likely be a race and not a bug if they did. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-24vfio: Don't overreact to DEL_DEVICEAlex Williamson
BUS_NOTIFY_DEL_DEVICE triggers IOMMU drivers to remove devices from their iommu group, but there's really nothing we can do about it at this point. If the device is in use, then the vfio sub-driver will block the device_del from completing until it's released. If the device is not in use or not owned by a vfio sub-driver, then we really don't care that it's being removed. The current code can be triggered just by unloading an sr-iov driver (ex. igb) while the VFs are attached to vfio-pci because it makes an incorrect assumption about the ordering of driver remove callbacks vs the DEL_DEVICE notification. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-07-10Merge tag 'vfio-v3.11' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio updates from Alex Williamson: "Largely hugepage support for vfio/type1 iommu and surrounding cleanups and fixes" * tag 'vfio-v3.11' of git://github.com/awilliam/linux-vfio: vfio/type1: Fix leak on error path vfio: Limit group opens vfio/type1: Fix missed frees and zero sized removes vfio: fix documentation vfio: Provide module option to disable vfio_iommu_type1 hugepage support vfio: hugepage support for vfio_iommu_type1 vfio: Convert type1 iommu to use rbtree
2013-07-04Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Ben Herrenschmidt: "This is the powerpc changes for the 3.11 merge window. In addition to the usual bug fixes and small updates, the main highlights are: - Support for transparent huge pages by Aneesh Kumar for 64-bit server processors. This allows the use of 16M pages as transparent huge pages on kernels compiled with a 64K base page size. - Base VFIO support for KVM on power by Alexey Kardashevskiy - Wiring up of our nvram to the pstore infrastructure, including putting compressed oopses in there by Aruna Balakrishnaiah - Move, rework and improve our "EEH" (basically PCI error handling and recovery) infrastructure. It is no longer specific to pseries but is now usable by the new "powernv" platform as well (no hypervisor) by Gavin Shan. - I fixed some bugs in our math-emu instruction decoding and made it usable to emulate some optional FP instructions on processors with hard FP that lack them (such as fsqrt on Freescale embedded processors). - Support for Power8 "Event Based Branch" facility by Michael Ellerman. This facility allows what is basically "userspace interrupts" for performance monitor events. - A bunch of Transactional Memory vs. Signals bug fixes and HW breakpoint/watchpoint fixes by Michael Neuling. And more ... I appologize in advance if I've failed to highlight something that somebody deemed worth it." * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (156 commits) pstore: Add hsize argument in write_buf call of pstore_ftrace_call powerpc/fsl: add MPIC timer wakeup support powerpc/mpic: create mpic subsystem object powerpc/mpic: add global timer support powerpc/mpic: add irq_set_wake support powerpc/85xx: enable coreint for all the 64bit boards powerpc/8xx: Erroneous double irq_eoi() on CPM IRQ in MPC8xx powerpc/fsl: Enable CONFIG_E1000E in mpc85xx_smp_defconfig powerpc/mpic: Add get_version API both for internal and external use powerpc: Handle both new style and old style reserve maps powerpc/hw_brk: Fix off by one error when validating DAWR region end powerpc/pseries: Support compression of oops text via pstore powerpc/pseries: Re-organise the oops compression code pstore: Pass header size in the pstore write callback powerpc/powernv: Fix iommu initialization again powerpc/pseries: Inform the hypervisor we are using EBB regs powerpc/perf: Add power8 EBB support powerpc/perf: Core EBB support for 64-bit book3s powerpc/perf: Drop MMCRA from thread_struct powerpc/perf: Don't enable if we have zero events ...
2013-07-01vfio/type1: Fix leak on error pathAlex Williamson
We also don't handle unpinning zero pages as an error on other exits so we can fix that inconsistency by rolling in the next conditional return. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-29vfio: remap_pfn_range() sets all those flags...Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-25vfio: Limit group opensAlex Williamson
vfio_group_fops_open attempts to limit concurrent sessions by disallowing opens once group->container is set. This really doesn't do what we want and allow for inconsistent behavior, for instance a group can be opened twice, then a container set giving the user two file descriptors to the group. But then it won't allow more to be opened. There's not much reason to have the group opened multiple times since most access is through devices or the container, so complete what the original code intended and only allow a single instance. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-25vfio/type1: Fix missed frees and zero sized removesAlex Williamson
With hugepage support we can only properly aligned and sized ranges. We only guarantee that we can unmap the same ranges mapped and not arbitrary sub-ranges. This means we might not free anything or might free more than requested. The vfio unmap interface started storing the unmapped size to return to userspace to handle this. This patch fixes a few places where we don't properly handle those cases, moves a memory allocation to a place where failure is an option and checks our loops to make sure we don't get into an infinite loop trying to remove an overlap. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21vfio: Provide module option to disable vfio_iommu_type1 hugepage supportAlex Williamson
Add a module option to vfio_iommu_type1 to disable IOMMU hugepage support. This causes iommu_map to only be called with single page mappings, disabling the IOMMU driver's ability to use hugepages. This option can be enabled by loading vfio_iommu_type1 with disable_hugepages=1 or dynamically through sysfs. If enabled dynamically, only new mappings are restricted. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21vfio: hugepage support for vfio_iommu_type1Alex Williamson
We currently send all mappings to the iommu in PAGE_SIZE chunks, which prevents the iommu from enabling support for larger page sizes. We still need to pin pages, which means we step through them in PAGE_SIZE chunks, but we can batch up contiguous physical memory chunks to allow the iommu the opportunity to use larger pages. The approach here is a bit different that the one currently used for legacy KVM device assignment. Rather than looking at the vma page size and using that as the maximum size to pass to the iommu, we instead simply look at whether the next page is physically contiguous. This means we might ask the iommu to map a 4MB region, while legacy KVM might limit itself to a maximum of 2MB. Splitting our mapping path also allows us to be smarter about locked memory because we can more easily unwind if the user attempts to exceed the limit. Therefore, rather than assuming that a mapping will result in locked memory, we test each page as it is pinned to determine whether it locks RAM vs an mmap'd MMIO region. This should result in better locking granularity and less locked page fudge factors in userspace. The unmap path uses the same algorithm as legacy KVM. We don't want to track the pfn for each mapping ourselves, but we need the pfn in order to unpin pages. We therefore ask the iommu for the iova to physical address translation, ask it to unpin a page, and see how many pages were actually unpinned. iommus supporting large pages will often return something bigger than a page here, which we know will be physically contiguous and we can unpin a batch of pfns. iommus not supporting large mappings won't see an improvement in batching here as they only unmap a page at a time. With this change, we also make a clarification to the API for mapping and unmapping DMA. We can only guarantee unmaps at the same granularity as used for the original mapping. In other words, unmapping a subregion of a previous mapping is not guaranteed and may result in a larger or smaller unmapping than requested. The size field in the unmapping structure is updated to reflect this. Previously this was unmodified on mapping, always returning the the requested unmap size. This is now updated to return the actual unmap size on success, allowing userspace to appropriately track mappings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-21vfio: Convert type1 iommu to use rbtreeAlex Williamson
We need to keep track of all the DMA mappings of an iommu container so that it can be automatically unmapped when the user releases the file descriptor. We currently do this using a simple list, where we merge entries with contiguous iovas and virtual addresses. Using a tree for this is a bit more efficient and allows us to use common code instead of inventing our own. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-06-20powerpc/vfio: Enable on pSeries platformAlexey Kardashevskiy
The enables VFIO on the pSeries platform, enabling user space programs to access PCI devices directly. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-20powerpc/vfio: Implement IOMMU driver for VFIOAlexey Kardashevskiy
VFIO implements platform independent stuff such as a PCI driver, BAR access (via read/write on a file descriptor or direct mapping when possible) and IRQ signaling. The platform dependent part includes IOMMU initialization and handling. This implements an IOMMU driver for VFIO which does mapping/unmapping pages for the guest IO and provides information about DMA window (required by a POWER guest). Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-06-05vfio: fix crash on rmmodAlexey Kardashevskiy
devtmpfs_delete_node() calls devnode() callback with mode==NULL but vfio still tries to write there. The patch fixes this. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-05-02Merge tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio updates from Alex Williamson: "Changes include extension to support PCI AER notification to userspace, byte granularity of PCI config space and access to unarchitected PCI config space, better protection around IOMMU driver accesses, default file mode fix, and a few misc cleanups." * tag 'vfio-for-v3.10' of git://github.com/awilliam/linux-vfio: vfio: Set container device mode vfio: Use down_reads to protect iommu disconnects vfio: Convert container->group_lock to rwsem PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities Register vfio-pci: Enable raw access to unassigned config space vfio-pci: Use byte granularity in config map vfio: make local function vfio_pci_intx_unmask_handler() static VFIO-AER: Vfio-pci driver changes for supporting AER VFIO: Wrapper for getting reference to vfio_device
2013-04-30vfio: Set container device modeAlex Williamson
Minor 0 is the VFIO container device (/dev/vfio/vfio). On it's own the container does not provide a user with any privileged access. It only supports API version check and extension check ioctls. Only by attaching a VFIO group to the container does it gain any access. Set the mode of the container to allow access. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-29Merge tag 'pci-v3.10-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.10 merge window: PCI device hotplug - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe) - Make acpiphp builtin only, not modular (Jiang Liu) - Add acpiphp mutual exclusion (Jiang Liu) Power management - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki) - Fix fallback to PCI_D0 (Rafael Wysocki) Miscellaneous - Factor quirk_io_region (Yinghai Lu) - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas) - Clean up EISA resource initialization and logging (Bjorn Helgaas) - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas) - MIPS: Initialize of_node before scanning bus (Gabor Juhos) - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos) - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang) - Fix aer_inject return values (Prarit Bhargava) - Remove PME/ACPI dependency (Andrew Murray) - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)" * tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability PCI: Remove "extern" from function declarations ...
2013-04-29vfio: Use down_reads to protect iommu disconnectsAlex Williamson
If a group or device is released or a container is unset from a group it can race against file ops on the container. Protect these with down_reads to allow concurrent users. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reported-by: Michael S. Tsirkin <mst@redhat.com>
2013-04-25vfio: Convert container->group_lock to rwsemAlex Williamson
All current users are writers, maintaining current mutual exclusion. This lets us add read users next. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-24vfio-pci: Use cached MSI/MSI-X capabilitiesBjorn Helgaas
We now cache the MSI/MSI-X capability offsets in the struct pci_dev, so no need to find the capabilities again. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-24vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASKBjorn Helgaas
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the Table Offset register, not the flags ("Message Control" per spec) register. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-15PCI/VFIO: use pcie_flags_reg instead of access PCI-E Capabilities RegisterYijing Wang
Currently, we use pcie_flags_reg to cache PCI-E Capabilities Register, because PCI-E Capabilities Register bits are almost read-only. This patch use pcie_caps_reg() instead of another access PCI-E Capabilities Register. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-04-01vfio-pci: Enable raw access to unassigned config spaceAlex Williamson
Devices like be2net hide registers between the gaps in capabilities and architected regions of PCI config space. Our choices to support such devices is to either build an ever growing and unmanageable white list or rely on hardware isolation to protect us. These registers are really no different than MMIO or I/O port space registers, which we don't attempt to regulate, so treat PCI config space in the same way. Reported-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Gavin Shan <shangw@linux.vnet.ibm.com>
2013-04-01vfio-pci: Use byte granularity in config mapAlex Williamson
The config map previously used a byte per dword to map regions of config space to capabilities. Modulo a bug where we round the length of capabilities down instead of up, this theoretically works well and saves space so long as devices don't try to hide registers in the gaps between capabilities. Unfortunately they do exactly that so we need byte granularity on our config space map. Increase the allocation of the config map and split accesses at capability region boundaries. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Gavin Shan <shangw@linux.vnet.ibm.com>
2013-03-26vfio-pci: Fix possible integer overflowAlex Williamson
The VFIO_DEVICE_SET_IRQS ioctl takes a start and count parameter, both of which are unsigned. We attempt to bounds check these, but fail to account for the case where start is a very large number, allowing start + count to wrap back into the valid range. Bounds check both start and start + count. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-25vfio: make local function vfio_pci_intx_unmask_handler() staticWei Yongjun
vfio_pci_intx_unmask_handler() was not declared. It should be static. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-15vfio: include <linux/slab.h> for kmallocArnd Bergmann
The vfio drivers call kmalloc or kzalloc, but do not include <linux/slab.h>, which causes build errors on ARM. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: kvm@vger.kernel.org
2013-03-11VFIO-AER: Vfio-pci driver changes for supporting AERVijay Mohan Pandarathil
- New VFIO_SET_IRQ ioctl option to pass the eventfd that is signaled when an error occurs in the vfio_pci_device - Register pci_error_handler for the vfio_pci driver - When the device encounters an error, the error handler registered by the vfio_pci driver gets invoked by the AER infrastructure - In the error handler, signal the eventfd registered for the device. - This results in the qemu eventfd handler getting invoked and appropriate action taken for the guest. Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-03-11VFIO: Wrapper for getting reference to vfio_deviceVijay Mohan Pandarathil
- Added vfio_device_get_from_dev() as wrapper to get reference to vfio_device from struct device. - Added vfio_device_data() as a wrapper to get device_data from vfio_device. Signed-off-by: Vijay Mohan Pandarathil <vijaymohan.pandarathil@hp.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-27vfio: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24drivers/vfio: remove depends on CONFIG_EXPERIMENTALKees Cook
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-18vfio-pci: Add support for VGA region accessAlex Williamson
PCI defines display class VGA regions at I/O port address 0x3b0, 0x3c0 and MMIO address 0xa0000. As these are non-overlapping, we can ignore the I/O port vs MMIO difference and expose them both in a single region. We make use of the VGA arbiter around each access to configure chipset access as necessary. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-18vfio-pci: Manage user power state transitionsAlex Williamson
We give the user access to change the power state of the device but certain transitions result in an uninitialized state which the user cannot resolve. To fix this we need to mark the PowerState field of the PMCSR register read-only and effect the requested change on behalf of the user. This has the added benefit that pdev->current_state remains accurate while controlled by the user. The primary example of this bug is a QEMU guest doing a reboot where the device it put into D3 on shutdown and becomes unusable on the next boot because the device did a soft reset on D3->D0 (NoSoftRst-). Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14vfio: whitelist pcieportAlex Williamson
pcieport does nice things like manage AER and we know it doesn't do DMA or expose any user accessible devices on the host. It also keeps the Memory, I/O, and Busmaster bits enabled, which is pretty handy when trying to use anyting below it. Devices owned by pcieport cannot be given to users via vfio, but we can tolerate them not being owned by vfio-pci. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14vfio: Protect vfio_dev_present against device_delAlex Williamson
vfio_dev_present is meant to give us a wait_event callback so that we can block removing a device from vfio until it becomes unused. The root of this check depends on being able to get the iommu group from the device. Unfortunately if the BUS_NOTIFY_DEL_DEVICE notifier has fired then the device-group reference is no longer searchable and we fail the lookup. We don't need to go to such extents for this though. We have a reference to the device, from which we can acquire a reference to the group. We can then use the group reference to search for the device and properly block removal. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14vfio-pci: Cleanup BAR accessAlex Williamson
We can actually handle MMIO and I/O port from the same access function since PCI already does abstraction of this. The ROM BAR only requires a minor difference, so it gets included too. vfio_pci_config_readwrite gets renamed for consistency. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14vfio-pci: Cleanup read/write functionsAlex Williamson
The read and write functions are nearly identical, combine them and convert to a switch statement. This also makes it easy to narrow the scope of when we use the io/mem accessors in case new regions are added. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-02-14vfio-pci: Enable PCIe extended capabilities on v1Alex Williamson
Even PCIe 1.x had extended config space. Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2013-01-15vfio-pci: Fix buffer overfillAlex Williamson
A read from a range hidden from the user (ex. MSI-X vector table) attempts to fill the user buffer up to the end of the excluded range instead of up to the requested count. Fix it. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Cc: stable@vger.kernel.org
2012-12-07vfio-pci: Enable device before attempting resetAlex Williamson
Devices making use of PM reset are getting incorrectly identified as not supporting reset because pci_pm_reset() fails unless the device is in D0 power state. When first attached to vfio_pci devices are typically in an unknown power state. We can fix this by explicitly setting the power state or simply calling pci_enable_device() before attempting a pci_reset_function(). We need to enable the device anyway, so move this up in our vfio_pci_enable() function, which also simplifies the error path a bit. Note that pci_disable_device() does not explicitly set the power state, so there's no need to re-order vfio_pci_disable(). Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-12-07VFIO: fix out of order labels for error recovery in vfio_pci_init()Jiang Liu
The two labels for error recovery in function vfio_pci_init() is out of order, so fix it. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2012-12-07VFIO: use ACCESS_ONCE() to guard access to dev->driverJiang Liu
Comments from dev_driver_string(), /* dev->driver can change to NULL underneath us because of unbinding, * so be careful about accessing it. */ So use ACCESS_ONCE() to guard access to dev->driver field. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>