summaryrefslogtreecommitdiffstats
path: root/drivers/usb/serial
AgeCommit message (Collapse)Author
2020-11-04USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas
Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas
Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-11-04USB: serial: cyberjack: fix write-URB completion raceJohan Hovold
The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-28USB: serial: option: add Quectel EC200T module supportZiyi Cao
Add usb product id of the Quectel EC200T module. Signed-off-by: Ziyi Cao <kernel@septs.pw> Link: https://lore.kernel.org/r/17f8a2a3-ce0f-4be7-8544-8fdf286907d0@www.fastmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-08Merge tag 'usb-serial-5.10-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.10-rc1 Here are the USB-serial updates for 5.10-rc1, including: - new device ids - various clean ups All have been in linux-next with no reported issues. * tag 'usb-serial-5.10-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Cellient MPL200 card USB: serial: ftdi_sio: use cur_altsetting for consistency USB: serial: option: Add Telit FT980-KS composition USB: serial: qcserial: fix altsetting probing USB: serial: ftdi_sio: clean up jtag quirks USB: serial: pl2303: add device-id for HP GC device USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adapters
2020-10-08USB: serial: option: add Cellient MPL200 cardWilken Gottwalt
Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/3db5418fe9e516f4b290736c5a199c9796025e3c.1601715478.git.wilken.gottwalt@mailbox.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05USB: serial: ftdi_sio: use cur_altsetting for consistencyMychaela N. Falconia
ftdi_determine_type() function had this construct in it to get the number of the interface it is operating on: inter = serial->interface->altsetting->desc.bInterfaceNumber; Elsewhere in this driver cur_altsetting is used instead for this purpose. Change ftdi_determine_type() to use cur_altsetting for consistency. Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org> [ johan: fix old style issues; drop braces and random white space ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-05USB: serial: option: Add Telit FT980-KS compositionLeonid Bloch
This commit adds the following Telit FT980-KS composition: 0x1054: rndis, diag, adb, nmea, modem, modem, aux AT commands can be sent to /dev/ttyUSB2. Signed-off-by: Leonid Bloch <lb.workbox@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/ce86bc05-f4e2-b199-0cdc-792715e3f275@asocscloud.com Link: https://lore.kernel.org/r/20201004155813.2342-1-lb.workbox@gmail.com Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-01USB: serial: qcserial: fix altsetting probingJohan Hovold
Drivers should not assume that interface descriptors have been parsed in any particular order so use the interface number to look up the second alternate setting. That number is also what the driver later use to switch setting. Note that although the driver could end up verifying the existence of the expected endpoints on the wrong interface, a later sanity check in usb_wwan_port_probe() would have caught this before it could cause any real damage. Fixes: a78b42824dd7 ("USB: serial: add qualcomm wireless modem driver") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-10-01USB: serial: ftdi_sio: clean up jtag quirksJohan Hovold
Drivers should not assume that interface descriptors have been parsed in any particular order so match on interface number instead when rejecting JTAG interfaces. Also use the interface struct device for notifications so that the interface number is included. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-09-29USB: serial: pl2303: add device-id for HP GC deviceScott Chen
This is adds a device id for HP LD381 which is a pl2303GC-base device. Signed-off-by: Scott Chen <scott@labau.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-09-29USB: serial: ftdi_sio: add support for FreeCalypso JTAG+UART adaptersMychaela N. Falconia
There exist many FT2232-based JTAG+UART adapter designs in which FT2232 Channel A is used for JTAG and Channel B is used for UART. The best way to handle them in Linux is to have the ftdi_sio driver create a ttyUSB device only for Channel B and not for Channel A: a ttyUSB device for Channel A would be bogus and will disappear as soon as the user runs OpenOCD or other applications that access Channel A for JTAG from userspace, causing undesirable noise for users. The ftdi_sio driver already has a dedicated quirk for such JTAG+UART FT2232 adapters, and it requires assigning custom USB IDs to such adapters and adding these IDs to the driver with the ftdi_jtag_quirk applied. Boutique hardware manufacturer Falconia Partners LLC has created a couple of JTAG+UART adapter designs (one buffered, one unbuffered) as part of FreeCalypso project, and this hardware is specifically made to be used with Linux hosts, with the intent that Channel A will be accessed only from userspace via appropriate applications, and that Channel B will be supported by the ftdi_sio kernel driver, presenting a standard ttyUSB device to userspace. Toward this end the hardware manufacturer will be programming FT2232 EEPROMs with custom USB IDs, specifically with the intent that these IDs will be recognized by the ftdi_sio driver with the ftdi_jtag_quirk applied. Signed-off-by: Mychaela N. Falconia <falcon@freecalypso.org> [johan: insert in PID order and drop unused define] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-09-14Merge 5.9-rc5 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-31USB: serial: option: support dynamic Quectel USB compositionsBjørn Mork
The USB composition, defining the set of exported functions, is dynamic in newer Quectel modems. Default functions can be disabled and alternative functions can be enabled instead. The alternatives includes class functions using interface pairs, which should be handled by the respective class drivers. Active interfaces are numbered consecutively, so static blacklisting based on interface numbers will fail when the composition changes. An example of such an error, where the option driver has bound to the CDC ECM data interface, preventing cdc_ether from handling this function: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Quectel S: Product=EC25-AF C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 4 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I:* If#= 5 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=option I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=option E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Another device with the same id gets correct drivers, since the interface of the network function happens to be blacklisted by option: T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0125 Rev= 3.18 S: Manufacturer=Android S: Product=Android C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Change rules for EC21, EC25, BG96 and EG95 to match vendor specific serial functions only, to prevent binding to class functions. Require 2 endpoints on ff/ff/ff functions, avoiding the 3 endpoint QMI/RMNET network functions. Cc: AceLan Kao <acelan.kao@canonical.com> Cc: Sebastian Sjoholm <ssjoholm@mac.com> Cc: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-08-31USB: serial: option: add support for SIM7070/SIM7080/SIM7090 modulesAleksander Morgado
These modules have 2 different USB layouts: The default layout with PID 0x9205 (AT+CUSBSELNV=1) exposes 4 TTYs and an ECM interface: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9205 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: AT-capable port (data). In the secondary layout with PID=0x9206 (AT+CUSBSELNV=86) the module exposes 6 TTY ports: T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1e0e ProdID=9206 Rev=00.00 S: Manufacturer=SimTech, Incorporated S: Product=SimTech SIM7080 S: SerialNumber=1234567890ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option The purpose of each TTY is as follows: * ttyUSB0: DIAG/QCDM port. * ttyUSB1: GNSS data. * ttyUSB2: AT-capable port (control). * ttyUSB3: QFLOG interface. * ttyUSB4: DAM interface. * ttyUSB5: AT-capable port (data). Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-08-24USB: serial: ftdi_sio: add IDs for Xsens Mti USB converterPatrick Riphagen
The device added has an FTDI chip inside. The device is used to connect Xsens USB Motion Trackers. Cc: stable@vger.kernel.org Signed-off-by: Patrick Riphagen <patrick.riphagen@xsens.com> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-08-18usb: mos7720: convert tasklets to use new tasklet_setup() APIAllen Pais
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Link: https://lore.kernel.org/r/20200817090209.26351-8-allen.cryptic@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-28Merge tag 'usb-serial-5.9-rc1' of ↵Greg Kroah-Hartman
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 5.9-rc1 Here are the USB-serial updates for 5.9-rc1, including: - console flow-control support - simulated line-breaks on some ch341 - hardware flow-control fixes for cp210x - break-detection and sysrq fixes for ftdi_sio - sysrq optimisations - input parity checking for cp210x Included are also some new device ids and various clean ups. All have been in linux-next with no reported issues. * tag 'usb-serial-5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (31 commits) USB: serial: qcserial: add EM7305 QDL product ID USB: serial: iuu_phoenix: fix led-activity helpers USB: serial: sierra: clean up special-interface handling USB: serial: cp210x: use in-kernel types in port data USB: serial: cp210x: drop unnecessary packed attributes USB: serial: cp210x: add support for TIOCGICOUNT USB: serial: cp210x: add support for line-status events USB: serial: cp210x: disable interface on errors in open USB: serial: drop redundant transfer-buffer casts USB: serial: drop extern keyword from function declarations USB: serial: drop unnecessary sysrq include USB: serial: add sysrq break-handler dummy USB: serial: inline sysrq dummy function USB: serial: only process sysrq when enabled USB: serial: only set sysrq timestamp for consoles USB: serial: ftdi_sio: fix break and sysrq handling USB: serial: ftdi_sio: clean up receive processing USB: serial: ftdi_sio: make process-packet buffer unsigned USB: serial: use fallthrough pseudo-keyword USB: serial: ch341: fix missing simulated-break margin ...
2020-07-21USB: serial: qcserial: add EM7305 QDL product IDErik Ekman
When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba laptop, it changed product ID to 0x9062 when entering QDL mode: usb 2-4: new high-speed USB device number 78 using xhci_hcd usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00 usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-4: Product: EM7305 usb 2-4: Manufacturer: Sierra Wireless, Incorporated The upgrade could complete after running # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id qcserial 2-4:1.0: Qualcomm USB modem converter detected usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0 Signed-off-by: Erik Ekman <erik@kryo.se> Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-21USB: serial: iuu_phoenix: fix led-activity helpersJohan Hovold
The set-led command is eight bytes long and starts with a command byte followed by six bytes of RGB data and ends with a byte encoding a frequency (see iuu_led() and iuu_rgbf_fill_buffer()). The led activity helpers had a few long-standing bugs which corrupted the command packets by inserting a second command byte and thereby offsetting the RGB data and dropping the frequency in non-xmas mode. In xmas mode, a related off-by-one error left the frequency field uninitialised. Fixes: 60a8fc017103 ("USB: add iuu_phoenix driver") Reported-by: George Spelvin <lkml@sdf.org> Link: https://lore.kernel.org/r/20200716085056.31471-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-20Merge 5.8-rc6 into usb-nextGreg Kroah-Hartman
We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16USB: serial: iuu_phoenix: fix memory corruptionJohan Hovold
The driver would happily overwrite its write buffer with user data in 256 byte increments due to a removed buffer-space sanity check. Fixes: 5fcf62b0f1f2 ("tty: iuu_phoenix: fix locking.") Cc: stable <stable@vger.kernel.org> # 2.6.31 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: sierra: clean up special-interface handlingJohan Hovold
Clean up the handling of special interfaces that either should be ignored or that need a larger number of URBs. Commit 66f092ed3b94 ("USB: serial: sierra: unify quirk handling logic") replaced the previous is_blacklisted() and is_highmemory() helpers with a single is_quirk() helper which made it even harder to understand what the interface lists were used for. Rename the interface-list struct, its members and the interface-lookup helper and restructure the code somewhat in order to make it more self-explanatory. Link: https://lore.kernel.org/r/20200713153936.18032-1-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: use in-kernel types in port dataJohan Hovold
The port data is not exported to user space so use the in-kernel u8 type. Link: https://lore.kernel.org/r/20200713105517.27796-6-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: drop unnecessary packed attributesJohan Hovold
Drop unnecessary packed attributes from structs without padding. Link: https://lore.kernel.org/r/20200713105517.27796-5-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: add support for TIOCGICOUNTJohan Hovold
Enable TIOCGICOUNT to allow reading out the (unused) interrupt counters and error statistics. Note that modem-status events are currently left unimplemented as they appear to be buffered on at least CP2102 and therefore cannot be used to implement TIOCMIWAIT. Link: https://lore.kernel.org/r/20200713105517.27796-4-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: add support for line-status eventsJohan Hovold
Add support for line-status events that specifically can be used to detect and report parity errors. Enable the device's event-insertion mode whenever input-parity checking is requested. This will insert line and modem status events into the data stream. Note that modem-status changes appear to be buffered until a character is received (at least on CP2102) and support is therefore left unimplemented. On at least one type of these chips (CP2102), line breaks are not reported as expected either (regardless of whether SERIAL_BREAK_CHAR is set) so do not enable event-mode when !IGNBRK is requested for now. Link: https://lore.kernel.org/r/20200713105517.27796-3-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-14USB: serial: cp210x: disable interface on errors in openJohan Hovold
Try to disable the serial interface in the unlikely event that generic open() fails. Link: https://lore.kernel.org/r/20200713105517.27796-2-johan@kernel.org Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: drop redundant transfer-buffer castsJohan Hovold
Drop redundant URB transfer-buffer casts. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: add sysrq break-handler dummyJohan Hovold
Add inline sysrq break-handler dummy to allow the compiler to eliminate further code when either console or sysrq support isn't enabled and to clearly mark the two sysrq functions as belonging together. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: inline sysrq dummy functionJohan Hovold
Inline the dummy sysrq character handling when either console support or magic-sysrq support isn't enabled to allow the compiler to eliminate unused code. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: only process sysrq when enabledJohan Hovold
Do not set the sysrq timestamp unless CONFIG_MAGIC_SYSRQ is enabled to avoid unnecessary per-character processing for consoles. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: only set sysrq timestamp for consolesJohan Hovold
Only set the sysrq timestamp for console ports to avoid having every driver also check the console flag when processing incoming data. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: ftdi_sio: fix break and sysrq handlingJohan Hovold
Only the last NUL in a packet should be flagged as a break character, for example, to avoid dropping unrelated characters when IGNBRK is set. Also make sysrq work by consuming the break character instead of having it immediately cancel the sysrq request, and by not processing it prematurely to avoid triggering a sysrq based on an unrelated character received in the same packet (which was received *before* the break). Note that the break flag can be left set also for a packet received immediately following a break and that and an ending NUL in such a packet will continue to be reported as a break as there's no good way to tell it apart from an actual break. Tested on FT232R and FT232H. Fixes: 72fda3ca6fc1 ("USB: serial: ftd_sio: implement sysrq handling on break") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: ftdi_sio: clean up receive processingJohan Hovold
Clean up receive processing by dropping the character pointer and keeping the length argument unchanged throughout the function. Also make it more apparent that sysrq processing can consume a characters by adding an explicit continue. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-09USB: serial: ftdi_sio: make process-packet buffer unsignedJohan Hovold
Use an unsigned type for the process-packet buffer argument and give it a more apt name. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-08USB: serial: use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-07USB: serial: option: add Quectel EG95 LTE modemAceLan Kao
Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-07USB: serial: ch341: fix missing simulated-break marginMichael Hanselmann
On devices which do not support break signalling a break condition is simulated by sending a NUL byte at the lowest possible speed. The break condition will be 9 bit periods long (start bit and eight data bits), but the transmission itself also includes the stop bit. Add the missing safety margin of one bit which is intended to account for timing differences, and fix up the corresponding comment. Signed-off-by: Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/9909b288-294d-16b9-9f14-51eb79c63b6c@msgid.hansmi.ch [ johan: amend commit message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-06USB: serial: cp210x: re-enable auto-RTS on openBrant Merryman
CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware flow control mode and UART on cp210x hardware is disabled. When re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS must be re-enabled in the driver. Signed-off-by: Brant Merryman <brant.merryman@silabs.com> Co-developed-by: Phu Luu <phu.luu@silabs.com> Signed-off-by: Phu Luu <phu.luu@silabs.com> Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com [ johan: fix up tags and problem description ] Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> # 2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-06USB: serial: cp210x: enable usb generic throttle/unthrottleBrant Merryman
Assign the .throttle and .unthrottle functions to be generic function in the driver structure to prevent data loss that can otherwise occur if the host does not enable USB throttling. Signed-off-by: Brant Merryman <brant.merryman@silabs.com> Co-developed-by: Phu Luu <phu.luu@silabs.com> Signed-off-by: Phu Luu <phu.luu@silabs.com> Link: https://lore.kernel.org/r/57401AF3-9961-461F-95E1-F8AFC2105F5E@silabs.com [ johan: fix up tags ] Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> # 2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-06USB: serial: ch341: simulate break condition if not supportedMichael Hanselmann
A subset of all CH341 devices don't support a real break condition. This fact is already used in the "ch341_detect_quirks" function. With this change a quirk is implemented to simulate a break condition by temporarily lowering the baud rate and sending a NUL byte. The primary drawbacks of this approach are that the duration of the break can't be controlled by userland and that data incoming during a simulated break is corrupted. The "TTY_DRIVER_HARDWARE_BREAK" serial driver flag was investigated as an alternative. It's a driver-wide flag and would've required significant changes to the serial and USB-serial driver frameworks to expose it for individual USB-serial adapters. Tested by sending a break condition and watching the TX pin using an oscilloscope. Signed-off-by: Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/f34a9b6e-ec2a-0873-e97b-2d5b2170e2ff@msgid.hansmi.ch [ johan: condense info message ] Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-02USB: serial: console: add support for flow controlJohan Hovold
Add support for enabling hardware flow control using the 'r' command line option. This also avoids a W=1 (-Wunused-but-set-variable) warning. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-02USB: serial: quatech2: drop two stub functionsJohan Hovold
Drop two unused stub functions which only served as documentation. This also avoids a W=1 (-Wunused-but-set-variable) warning. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-02USB: serial: kobil_sct: log failure to update line settingsJohan Hovold
Log failure to update the line settings in set_termios(). This also avoids a W=1 (-Wunused-but-set-variable) warning. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-02USB: serial: keyspan_pda: drop unused firmware reset statusJohan Hovold
Drop the unused firmware reset status which would already have been logged. This suppresses the corresponding W=1 (-Wunused-but-set-variable) warning. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-02USB: serial: iuu_phoenix: drop unused URB submission resultsJohan Hovold
The driver is submitting URBs in various completion callbacks without bothering to log errors yet still assigned the return value to temporary variables. Let's drop those temporaries. This suppresses the corresponding W=1 (-Wunused-but-set-variable) warnings. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-02USB: serial: garmin_gps: don't compile unused packet definitionsJohan Hovold
Don't compile the four unused packet definitions but keep them around for documentation purposes. This avoids the corresponding W=1 (-Wunused-const-variable) warning. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org>
2020-07-01USB: Fix up terminologyGreg Kroah-Hartman
USB is a HOST/DEVICE protocol, as per the specification and all documentation. Fix up terms that are not applicable to make things match up with the terms used through the rest of the USB stack. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20200630174123.GA1906678@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30USB: serial: ch341: add min and max line-speed macrosJohan Hovold
The line-speed algorithm clamps the requested value to the supported range instead of bailing out on unsupported values. Provide min and max macros and indicate how they are derived instead of hardcoding the limits. Note that the algorithm depends on the minimum rate (45.78 bps) being rounded up (and the maximum rate being rounded down) to avoid special casing. Suggested-by: Michael Hanselmann <public@hansmi.ch> Link: https://lore.kernel.org/r/20200630095756.GZ3334@localhost Signed-off-by: Johan Hovold <johan@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-07 07:51:16 +0000