summaryrefslogtreecommitdiffstats
path: root/drivers/usb/dwc2/platform.c
AgeCommit message (Collapse)Author
2020-07-27Revert "usb: dwc2: override PHY input signals with usb role switch support"Greg Kroah-Hartman
This reverts commit bc0f0d4a5853e32ba97a0318f774570428fc5634. It was not meant to be applied yet. Cc: Minas Harutyunyan <hminas@synopsys.com> Cc: Amelie Delaunay <amelie.delaunay@st.com> Cc: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24usb: dwc2: Fix error path in gadget registrationMarek Szyprowski
When gadget registration fails, one should not call usb_del_gadget_udc(). Ensure this by setting gadget->udc to NULL. Also in case of a failure there is no need to disable low-level hardware, so return immiedetly instead of jumping to error_init label. This fixes the following kernel NULL ptr dereference on gadget failure (can be easily triggered with g_mass_storage without any module parameters): dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM Mass Storage Function, version: 2009/09/11 LUN: removable file: (no medium) no file given for LUN0 g_mass_storage 12480000.hsotg: failed to start g_mass_storage: -22 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.8.0-rc5 #3133 Hardware name: Samsung Exynos (Flattened Device Tree) Workqueue: events deferred_probe_work_func PC is at usb_del_gadget_udc+0x38/0xc4 LR is at __mutex_lock+0x31c/0xb18 ... Process kworker/0:1 (pid: 12, stack limit = 0x(ptrval)) Stack: (0xef121db0 to 0xef122000) ... [<c076bf3c>] (usb_del_gadget_udc) from [<c0726bec>] (dwc2_hsotg_remove+0x10/0x20) [<c0726bec>] (dwc2_hsotg_remove) from [<c0711208>] (dwc2_driver_probe+0x57c/0x69c) [<c0711208>] (dwc2_driver_probe) from [<c06247c0>] (platform_drv_probe+0x6c/0xa4) [<c06247c0>] (platform_drv_probe) from [<c0621df4>] (really_probe+0x200/0x48c) [<c0621df4>] (really_probe) from [<c06221e8>] (driver_probe_device+0x78/0x1fc) [<c06221e8>] (driver_probe_device) from [<c061fcd4>] (bus_for_each_drv+0x74/0xb8) [<c061fcd4>] (bus_for_each_drv) from [<c0621b54>] (__device_attach+0xd4/0x16c) [<c0621b54>] (__device_attach) from [<c0620c98>] (bus_probe_device+0x88/0x90) [<c0620c98>] (bus_probe_device) from [<c06211b0>] (deferred_probe_work_func+0x3c/0xd0) [<c06211b0>] (deferred_probe_work_func) from [<c0149280>] (process_one_work+0x234/0x7dc) [<c0149280>] (process_one_work) from [<c014986c>] (worker_thread+0x44/0x51c) [<c014986c>] (worker_thread) from [<c0150b1c>] (kthread+0x158/0x1a0) [<c0150b1c>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20) Exception stack(0xef121fb0 to 0xef121ff8) ... ---[ end trace 9724c2fc7cc9c982 ]--- While fixing this also fix the double call to dwc2_lowlevel_hw_disable() if dr_mode is set to USB_DR_MODE_PERIPHERAL. In such case low-level hardware is already disabled before calling usb_add_gadget_udc(). That function correctly preserves low-level hardware state, there is no need for the second unconditional dwc2_lowlevel_hw_disable() call. Fixes: 207324a321a8 ("usb: dwc2: Postponed gadget registration to the udc class driver") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-23usb: dwc2: override PHY input signals with usb role switch supportAmelie Delaunay
This patch adds support for usb role switch to dwc2, by using overriding control of the PHY voltage valid and ID input signals. iddig signal (ID) can be overridden: - when setting GUSBCFG_FORCEHOSTMODE, iddig input pin is overridden with 1; - when setting GUSBCFG_FORCEDEVMODE, iddig input pin is overridden with 0. avalid/bvalid/vbusvalid signals can be overridden respectively with: - GOTGCTL_AVALOEN + GOTGCTL_AVALOVAL - GOTGCTL_BVALOEN + GOTGCTL_BVALOVAL - GOTGCTL_VBVALEN + GOTGCTL_VBVALOVAL It is possible to determine valid sessions thanks to usb role switch: - if USB_ROLE_NONE then !avalid && !bvalid && !vbusvalid - if USB_ROLE_DEVICE then !avalid && bvalid && vbusvalid - if USB_ROLE_HOST then avalid && !bvalid && vbusvalid Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-07-09usb: dwc2: Fix shutdown callback in platformMinas Harutyunyan
To avoid lot of interrupts from dwc2 core, which can be asserted in specific conditions need to disable interrupts on HW level instead of disable IRQs on Kernel level, because of IRQ can be shared between drivers. Cc: stable@vger.kernel.org Fixes: a40a00318c7fc ("usb: dwc2: add shutdown callback to platform variant") Tested-by: Frank Mori Hess <fmh6jj@gmail.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Frank Mori Hess <fmh6jj@gmail.com> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-06-18usb: dwc2: Postponed gadget registration to the udc class driverMinas Harutyunyan
During dwc2 driver probe, after gadget registration to the udc class driver, if exist any builtin function driver it immediately bound to dwc2 and after init host side (dwc2_hcd_init()) stucked in host mode. Patch postpone gadget registration after host side initialization done. Fixes: 117777b2c3bb9 ("usb: dwc2: Move gadget probe function into platform code") Reported-by: kbuild test robot <lkp@intel.com> Tested-by: Marek Vasut <marex@denx.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Link: https://lore.kernel.org/r/f21cb38fecc72a230b86155d94c7e60c9cb66f58.1591690938.git.hminas@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-25usb: dwc2: Update Core Reset programming flow.Minas Harutyunyan
Starting from core version 4.20a Core Reset flow is changed. Introduced new bit in GRSTCTL register - GRSTCTL_CSFTRST_DONE. Core Reset new programming flow steps are follow: 1. Set GRSTCTL_CSFTRST bit. 2. Wait for bit GRSTCTL_CSFTRST_DONE is set. 3. Clear GRSTCTL_CSFTRST and GRSTCTL_CSFTRST_DONE bits. Check core version functionality separated from dwc2_get_hwparams() to new dwc2_check_core_version() function because Core Reset flow depend on SNPSID. Signed-off-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-24usb: dwc2: convert to devm_platform_get_and_ioremap_resourceDejin Zheng
Use devm_platform_get_and_ioremap_resource() to simplify code, which contains platform_get_resource() and devm_ioremap_resource(), it also get the resource for use by the following code. Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com> Link: https://lore.kernel.org/r/20200323160612.17277-5-zhengdejin5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-15usb: dwc2: Silence warning about supplies during deferred probeMarek Szyprowski
Don't confuse user with meaningless warning about the failure in getting supplies in case of deferred probe. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2020-03-15usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FSAmelie Delaunay
This patch introduces a new parameter to activate external ID pin and valid vbus level detection, required on STM32MP15 SoC to support dual role, either in HS or FS. The STM32MP15 SoC uses the GGPIO register to enable the level detection. The level detector requires to be powered. Also adds the params structures for STM32MP15 OTG HS and STM32MP1 OTG FS. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2019-07-30usb: Remove dev_err() usage after platform_get_irq()Stephen Boyd
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-47-swboyd@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-01Merge tag 'usb-for-v5.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v5.3 merge window The biggest part here is a set of patches removing unnecesary variables from several drivers. Meson-g12a's dwc3 glue implemented IRQ-based OTG/DRD role swap. Qcom's dwc3 glue added support for ACPI, mainly for the AArch64-based SoCs. DWC3 also got support for Intel Elkhart Lake platforms. * tag 'usb-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (30 commits) usb: dwc3: remove unused @lock member of dwc3_ep struct usb: dwc3: pci: Add Support for Intel Elkhart Lake Devices usb: Replace snprintf with scnprintf in gether_get_ifname usb: gadget: ether: Fix race between gether_disconnect and rx_submit usb: gadget: storage: Remove warning message usb: dwc3: gadget: Add support for disabling U1 and U2 entries usb: gadget: send usb_gadget as an argument in get_config_params doc: dt: bindings: usb: dwc3: Update entries for disabling U1 and U2 usb: dwc3: qcom: Use of_clk_get_parent_count() usb: dwc3: Fix core validation in probe, move after clocks are enabled usb: dwc3: qcom: Improve error handling usb: dwc3: qcom: Start USB in 'host mode' on the SDM845 usb: dwc3: qcom: Add support for booting with ACPI soc: qcom: geni: Add support for ACPI Revert "usb: dwc2: host: Setting qtd to NULL after freeing it" usb: gadget: net2272: remove redundant assignments to pointer 's' usb: gadget: Zero ffs_io_data USB: omap_udc: Remove unneeded variable fotg210-udc: Remove unneeded variable usb: gadget: at91_udc: Remove unneeded variable ...
2019-06-18USB: dwc2: Don't turn off the usbphy in suspend if wakeup is enabledDouglas Anderson
If the 'snps,need-phy-for-wake' is set in the device tree then: - We know that we can wakeup, so call device_set_wakeup_capable(). The USB core will use this knowledge to enable wakeup by default. - We know that we should keep the PHY on during suspend if something on our root hub needs remote wakeup. This requires the patch (USB: Export usb_wakeup_enabled_descendants()). Note that we don't keep the PHY on at suspend time if it's not needed because it would be a power draw. If we later find some users of dwc2 that can support wakeup without keeping the PHY on we may want to add a way to call device_set_wakeup_capable() without keeping the PHY on at suspend time. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-06-18usb: dwc2: Use generic PHY width in params setupJules Maselbas
Setting params.phy_utmi_width in dwc2_lowlevel_hw_init() is pointless since it's value will be overwritten by dwc2_init_params(). This change make sure to take in account the generic PHY width information during paraminitialisation, done in dwc2_set_param_phy_utmi_width(). By doing so, the phy_utmi_width params can still be overrided by devicetree specific params and will also be checked against hardware capabilities. Fixes: 707d80f0a3c5 ("usb: dwc2: gadget: Replace phyif with phy_utmi_width") Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc2: gadget: Replace phyif with phy_utmi_widthJules Maselbas
The phy utmi width information is already set in hsotg params, phyif is only used in few places and I don't see any reason to not use hsotg's params. Moreover the utmi width was being forced to 16 bits by platform initialization which doesn't take in account HW configuration. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc2: optionally assert phy reset when waking upDouglas Anderson
On the rk3288 USB host-only port (the one that's not the OTG-enabled port) the PHY can get into a bad state when a wakeup is asserted (not just a wakeup from full system suspend but also a wakeup from autosuspend). We can get the PHY out of its bad state by asserting its "port reset", but unfortunately that seems to assert a reset onto the USB bus so it could confuse things if we don't actually deenumerate / reenumerate the device. We can also get the PHY out of its bad state by fully resetting it using the reset from the CRU (clock reset unit), which does a more full reset. The CRU-based reset appears to actually cause devices on the bus to be removed and reinserted, which fixes the problem (albeit in a hacky way). It's unfortunate that we need to do a full re-enumeration of devices at wakeup time, but this is better than alternative of letting the bus get wedged. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-05-03usb: dwc2: get optional clock by devm_clk_get_optional()Chunfeng Yun
When the driver tries to get optional clock, it ignores all errors, but if only ignores -ENOENT, it will cover some real errors, such as -EPROBE_DEFER, so use devm_clk_get_optional() to get optional clock. Cc: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-10-02usb: dwc2: get optional vbus-supply regulator onceFabrice Gasnier
Move devm_regulator_get_optional() call to probe routine. This avoids 'vbus-supply' regulator to be requested lots of times, upon each call to dwc2_vbus_supply_init(), e.g. like with runtime pm. Fixes: 531ef5ebea96 ("usb: dwc2: add support for host mode external vbus supply") Tested-by: Artur Petrosyan <arturp@synopsys.com> Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-09-05usb: dwc2: Fix call location of dwc2_check_core_endiannessBruno Meirelles Herrera
Some SoC/IP as STM32F469, the snpsid can only be read after clock is enabled, otherwise it will read as 0, and the dwc2_check_core_endianness will assume the core and AHB have opposite endianness, leading to the following error: [ 1.976339] dwc2 50000000.usb: 50000000.usb supply vusb_d not found, using dummy regulator [ 1.986124] dwc2 50000000.usb: Linked as a consumer to regulator.0 [ 1.992711] dwc2 50000000.usb: 50000000.usb supply vusb_a not found, using dummy regulator [ 2.003672] dwc2 50000000.usb: dwc2_core_reset: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE [ 2.015176] dwc2: probe of 50000000.usb failed with error -16 The proposed patch changes the location where dwc2_check_core_endianness is called, allowing the clock peripheral to be enabled first. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Bruno Meirelles Herrera <bmh@certi.org.br> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-30usb: dwc2: Make dwc2_readl/writel functions endianness-agnostic.Gevorg Sahakyan
Declared dwc2_check_core_endianness() function for dynamicly check core endianness. Added needs_byte_swap flag to hsotg structure, and depending on flag swap value inside dwc2_readl/writel functions. Signed-off-by: Gevorg Sahakyan <sahakyan@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Force mode optimizationsVardan Mikayelyan
If the dr_mode is USB_DR_MODE_OTG, forcing the mode is needed during driver probe to get the host and device specific HW parameters. Then we clear the force mode bits so that the core operates in OTG mode. The force mode bits should not be touched at any other time during the driver lifetime and they should be preserved whenever the GUSBCFG register is written to. The force mode bit values will persist across soft resets of the core. If the dr_mode is either USB_DR_MODE_HOST or USB_DR_MODE_PERIPHERAL, the force mode is set just once at probe to configure the core as either a host or peripheral. Given the above, we no longer need any other reset delays, force delays, or any forced modes anywhere else in the driver. So replace all calls to dwc2_core_reset_and_force_dr_mode() with dwc2_core_reset() and remove all other unnecessary delays. Also remove the dwc2_force_mode_if_needed() function since the "if needed" part is already taken care of by the polling in dwc2_force_mode(). Finally, remove all other calls to dwc2_clear_force_mode(). Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: core: Add hibernated flagVardan Mikayelyan
Added a flag to indicate that core is in hibernation, it is used to determine the hibernation state of the core. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-13usb: dwc2: Print error if unable to set DMA coherent maskStefan Wahren
We better print an error in case probing of dwc2 fails on setting the DMA coherent mask. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-03-08usb: dwc2: eliminate irq parameter from dwc2_gadget_initVardan Mikayelyan
The irq is available in hsotg already, so there's no need to pass it as separate function parameter. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: Grigor Tovmasyan <tovmasya@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-12-12usb: dwc2: add optional usb ecc reset bitDinh Nguyen
The dwc2 USB controller in Stratix10 has an additional ECC reset bit that needs to get de-asserted in order for the controller to work properly. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-11-04USB: add SPDX identifiers to all remaining files in drivers/usb/Greg Kroah-Hartman
It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-11usb: dwc2: simplify optional reset handlingPhilipp Zabel
As of commit bb475230b8e5 ("reset: make optional functions really optional"), the reset framework API calls use NULL pointers to describe optional, non-present reset controls. This allows to return errors from devm_reset_control_get_optional and to call reset_control_(de)assert unconditionally. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-26usb: dwc2: eliminate irq parameter from dwc2_hcd_initHeiner Kallweit
The irq is available in hsotg already, so there's no need to pass it as separate function parameter. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Fix brace usageJohn Youn
* Remove braces for one-line statements * Add missing braces where another arm in if-statement uses braces Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2017-01-24usb: dwc2: Cleanup some checkpatch issuesJohn Youn
This commmit is the result of running checkpatch --fix. The results were verified for correctness. Some of the fixes result in line over 80 char which we will fix manually later. The following is a summary of what was done by checkpatch: * Remove externs on function prototypes. * Replace symbolic permissions with octal. * Align code to open parens. * Replace 'unsigned' with 'unsigned int'. * Remove unneccessary blank lines. * Add blank lines after declarations. * Add spaces around operators. * Remove unnecessary spaces after casts. * Replace 'x == NULL' with '!x'. * Replace kzalloc() with kcalloc(). * Concatenate multi-line strings. * Use the BIT() macro. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Remove dwc2_set_all_params functionJohn Youn
Replace this by statically defining a function with defaults, and just assigning it. This will allow us to use parameters of any type and any default value. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Move parameter initialization into params.cJohn Youn
Consolidate and move all the parameter initialization code from the probe function to params.c. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Declare the core params struct staticallyJohn Youn
This makes it consistent with the hw_params struct and simplifies the memory management for future refactoring. Fix up usage in all files. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-11-18usb: dwc2: Add params.c fileJohn Youn
Add a params.c file and move all driver parameter code there, including all the static parameter definitions. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-10-07Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
2016-09-14usb: dwc2: add support for Meson8b and GXBB SoCsJerome Brunet
Add compatible strings for amlogic Meson8b and GXBB SoCs with the corresponding configuration parameters. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-08-22usb: dwc2: Add reset control to dwc2Dinh Nguyen
Allow for platforms that have a reset controller driver in place to bring the USB IP out of reset. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc2: Proper cleanup on dr_mode failureJohn Youn
Cleanup in probe if we fail to get dr_mode. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-03-04usb: dwc2: Add support for Lantiq ARX and XRX SoCsAntti Seppälä
Add support for Lantiq ARX and XRX SoC families to the dwc2 driver. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Antti Seppälä <a.seppala@gmail.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc2: host: Set host_rx_fifo_size to 525 for rk3066Douglas Anderson
As documented in dwc2_calculate_dynamic_fifo(), host_rx_fifo_size should really be: 2 * ((Largest Packet size / 4) + 1 + 1) + n with n = number of host channel. We have 9 host channels, so 2 * ((1024/4) + 2) + 9 = 516 + 9 = 525 We've got 960 / 972 total_fifo_size on rk3288 (and presumably on rk3066) and 525 + 128 + 256 = 909 so we're still under on both ports even when we increment by 5. In the future, it would be nice if dwc2_calculate_dynamic_fifo() could handle the "too small" FIFO case and come up with something more dynamically. When we do that we can figure out how to allocate the extra 48 / 60 bytes of FIFO that we're currently wasting. NOTE: no known bugs are fixed by this patch, but it seems like a simple fix and ought to fix someone. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: dwc2: rockchip: Make the max_transfer_size automaticDouglas Anderson
Previously we needed to set the max_transfer_size to explicitly be 65535 because the old driver would detect that our hardware could support much bigger transfers and then would try to do them. This wouldn't work since the DMA alignment code couldn't support it. Later in commit e8f8c14d9da7 ("usb: dwc2: clip max_transfer_size to 65535") upstream added support for clipping this automatically. Since that commit it has been OK to just use "-1" (default), but nobody bothered to change it. Let's change it to default now for two reasons: - It's nice to use autodetected params. - If we can remove the 65535 limit, we can transfer more! Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-02-03Revert "usb: dwc2: Move reset into dwc2_get_hwparams()"John Youn
This reverts commit 263b7fb557f7 ("usb: dwc2: Move reset into dwc2_get_hwparams()") due to regression found on bcm2835 platform. USB ethernet fails, due to being unable to pick up proper parameters when performing a plain reset before reading hw params. Below shows the results of the gnptxfsiz and hptxfsiz with and before and after reverting this (from Stefan Wahren): So here is the probe result before Patch 1 is applied: [ 1.283148] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.313894] dwc2 20980000.usb: gnptxfsiz=00201000 [ 1.314104] dwc2 20980000.usb: hptxfsiz=00000000 [ 1.353908] dwc2 20980000.usb: 256 invalid for host_nperio_tx_fifo_size. Check HW configuration. [ 1.354262] dwc2 20980000.usb: 512 invalid for host_perio_tx_fifo_size. Check HW configuration. [ 1.394249] dwc2 20980000.usb: DWC OTG Controller [ 1.394561] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.394917] dwc2 20980000.usb: irq 33, io mem 0x00000000 And here is the probe result after Patch 1 is applied: [ 1.280107] dwc2 20980000.usb: Configuration mismatch. dr_mode forced to host [ 1.353949] dwc2 20980000.usb: gnptxfsiz=01001000 [ 1.354166] dwc2 20980000.usb: hptxfsiz=02002000 [ 1.434301] dwc2 20980000.usb: DWC OTG Controller [ 1.434616] dwc2 20980000.usb: new USB bus registered, assigned bus number 1 [ 1.434973] dwc2 20980000.usb: irq 33, io mem 0x00000000 Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Reported-by: Stefan Wahren <stefan.wahren@i2se.com> Reported-by: Remi Pommarel <repk@triplefau.lt> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Tested-by: Remi Pommarel <repk@triplefau.lt> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2015-12-22usb: dwc2: add shutdown callback to platform variantHeiko Stübner
In specific conditions (involving usb hubs) dwc2 devices can create a lot of interrupts, even to the point of overwhelming devices running at low frequencies. Some devices need to do special clock handling at shutdown-time which may bring the system clock below the threshold of being able to handle the dwc2 interrupts. Disabling dwc2-irqs in a shutdown callbacks prevents reboots/poweroffs from getting stuck in such cases. The hsotg struct already contains an unused irq element, so we can just use it to store the irq number for the shutdown callback. Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@collabora.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22usb: dwc2: Remove redundant reset in probeJohn Youn
Reset already happens before this so just force the dr_mode. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22usb: dwc2: Move reset into dwc2_get_hwparams()John Youn
The reset is required to get reset values of the hardware parameters but the force mode is not. Move the base reset into dwc2_get_hwparams() and do the reset and force mode afterwards. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22usb: dwc2: Fix dr_mode validationJohn Youn
The dr_mode parameter was being checked against how the dwc2 module was being configured at compile time. But it wasn't checked against the hardware capabilities, nor were the hardware capabilities checked against the compilation parameters. This commit adds those checks and adjusts dr_mode to an appropriate value, if needed. If the hardware capabilities and module compilation do not match then we fail as it wouldn't be possible to run properly. The hardware, module, and dr_mode, can each be set to host, device, or otg. Check that all these values are compatible and adjust the value of dr_mode if possible. The following table summarizes the behavior: actual HW MOD dr_mode dr_mode ------------------------------ HST HST any : HST HST DEV any : --- HST OTG any : HST DEV HST any : --- DEV DEV any : DEV DEV OTG any : DEV OTG HST any : HST OTG DEV any : DEV OTG OTG any : dr_mode Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22usb: dwc2: Rename dwc2_core_reset()John Youn
Renamed dwc2_core_reset() to dwc2_core_reset_and_force_dr_mode(). This describes what it is doing more accurately. This is in preparation of introducing a plain dwc2_core_reset() function that only performs the reset and doesn't force the mode. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-22usb: dwc2: reset dwc2 core before dwc2_get_hwparams()Yunzhi Li
We initiate dwc2 usb controller in BIOS, dwc2_core_reset() should be called before dwc2_get_hwparams() to reset core registers to default value. Without this the FIFO setting might be incorrect because calculating FIFO size need power-on value of GRXFSIZ/GNPTXFSIZ/HPTXFSIZ registers. This patch could avoid warnning massage like in rk3288 platform: [ 2.074764] dwc2 ff580000.usb: 256 invalid for host_perio_tx_fifo_size. Check HW configuration. Signed-off-by: Yunzhi Li <lyz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-15usb: dwc2: add support of hi6220Zhangfei Gao
Support hisilicon,hi6220-usb for HiKey board Acked-by: Rob Herring <robh@kernel.org> Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-15usb: dwc2: host: enable descriptor dma for fs devicesMian Yousaf Kaukab
As descriptor dma mode does not support split transfers, it can't be enabled for high speed devices. Add a core parameter to enable it for full speed devices. Ensure frame list and descriptor list are correctly freed during disconnect. Acked-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Mian Yousaf Kaukab <yousaf.kaukab@intel.com> Signed-off-by: Gregory Herrero <gregory.herrero@intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-11-20usb: dwc2: fix kernel oops during driver probeStefan Wahren
This patch make sure that all necessary members of dwc2_hsotg are initialized before the irq handler is requested. So the kernel oops triggered by dwc2_handle_common_intr has been fixed. dwc2 20980000.usb: Configuration mismatch. Forcing host mode dwc2 20980000.usb: no platform data or transceiver defined Unable to handle kernel paging request at virtual address cc860040 pgd = c0004000 [cc860040] *pgd=0b41e811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.3.0-rc3+ #19 Hardware name: BCM2835 task: cb494000 ti: cb4d0000 task.ti: cb4d0000 PC is at dwc2_is_controller_alive+0x18/0x34 LR is at dwc2_handle_common_intr+0x24/0xb60 Acked-by: John Youn <johnyoun@synopsys.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-04 13:59:22 +0000