summaryrefslogtreecommitdiffstats
path: root/drivers/tty/serial
AgeCommit message (Collapse)Author
2020-12-17Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds
Pull OpenRISC updates from Stafford Horne: - New drivers and OpenRISC support for the LiteX platform - A bug fix to support userspace gdb debugging - Fixes one compile issue with blk-iocost * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: add local64.h to fix blk-iocost build openrisc: fix trap for debugger breakpoint signalling openrisc: add support for LiteX drivers/tty/serial: add LiteUART driver dt-bindings: serial: document LiteUART bindings drivers/soc/litex: add LiteX SoC Controller driver dt-bindings: soc: document LiteX SoC Controller bindings dt-bindings: vendor: add vendor prefix for LiteX
2020-12-15Merge tag 'tty-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "large" set of tty and serial patches for 5.11-rc1. Nothing major at all, some cleanups and some driver removals, always a nice sign: - build warning cleanups - vt locking and logic unwinding and cleanups - tiny serial driver fixes and updates - removal of the synclink serial driver as it's no longer needed - removal of dead termiox code All of this has been in linux-next for a while with no reported issues" * tag 'tty-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (89 commits) serial: 8250_pci: Drop bogus __refdata annotation tty: serial: meson: enable console as module serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access serial: imx: Move imx_uart_probe_dt() content into probe() serial: imx: Remove unneeded of_device_get_match_data() NULL check tty: Fix whitespace inconsistencies in vt_io_ioctl serial_core: Check for port state when tty is in error state dt-bindings: serial: Update DT binding docs to support SiFive FU740 SoC tty: use const parameters in port-flag accessors tty: use assign_bit() in port-flag accessors earlycon: drop semicolon from earlycon macro tty: Remove dead termiox code tty/serial/imx: Enable TXEN bit in imx_poll_init(). tty : serial: jsm: Fixed file by adding spacing tty: serial: uartlite: Support probe deferral earlycon: simplify earlycon-table implementation tty: serial: bcm63xx: lower driver dependencies serial: mxs-auart: Remove unneeded platform_device_id serial: 8250-mtk: Fix reference leak in mtk8250_probe serial: imx: Remove unused .id_table support ...
2020-12-14Merge tag 'm68k-for-v5.11-tag1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - fix WARNING splat in pmac_zilog driver - fix ADB input device regression - assume maintainership for adb-iop and via-macii - minor fixes and improvements - defconfig updates * tag 'm68k-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: MAINTAINERS: Update m68k Mac entry macintosh/adb-iop: Send correct poll command macintosh/adb-iop: Always wait for reply message from IOP m68k: Fix WARNING splat in pmac_zilog driver m68k: Add a missing ELF_DETAILS in link script m68k: Drop redundant NOTES in link script m68k: mac: Update Kconfig help m68k: mac: Remove redundant VIA register writes m68k: mac: Remove dead code m68k: mac: Refactor iop_preinit() and iop_init() m68k: defconfig: Enable KUnit tests m68k: defconfig: Update defconfigs for v5.10-rc1 m68k: Remove unused mach_max_dma_address m68k: Avoid xchg() warning
2020-12-11serial: 8250_pci: Drop bogus __refdata annotationGeert Uytterhoeven
Since commit d73dfc6a4199e0e3 ("serial: 8250_pci: remove __devexit usage") in v3.9, the 8250/16550 PCI serial driver no longer has any code or data located in initmem, hence there is no need to annotate the pci_serial_quirks structure with __refdata. Drop the annotation, to avoid suppressing future section warnings. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201211133907.2970460-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11tty: serial: meson: enable console as moduleKevin Hilman
Enable serial driver to be built as a module. To do so, init the console support on driver/module load instead of using console_initcall(). Signed-off-by: Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20201211005744.12855-1-khilman@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10serial: 8250_omap: Avoid FIFO corruption caused by MDR1 accessAlexander Sverdlin
It has been observed that once per 300-1300 port openings the first transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared as "e" on the wire). It only happened if single byte has been transmitted right after port open, which means, DMA is not used for this transfer and the corruption never happened afterwards. Therefore I've carefully re-read the MDR1 errata (link below), which says "when accessing the MDR1 registers that causes a dummy under-run condition that will freeze the UART in IrDA transmission. In UART mode, this may corrupt the transferred data". Strictly speaking, omap_8250_mdr1_errataset() performs a read access and if the value is the same as should be written, exits without errata-recommended FIFO reset. A brief check of the serial_omap_mdr1_errataset() from the competing omap-serial driver showed it has no read access of MDR1. After removing the read access from omap_8250_mdr1_errataset() the data corruption never happened any more. Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-10serial: imx: Move imx_uart_probe_dt() content into probe()Fabio Estevam
Now that the driver only probes via devicetree, we can move the content of imx_uart_probe_dt() directly into imx_uart_probe() to make the code simpler. Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201209214712.15247-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09serial: imx: Remove unneeded of_device_get_match_data() NULL checkFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform and the NULL check on of_device_get_match_data() is no longer needed. This check was only needed when this driver supported both DT and non-DT platforms. Remove the unneeded of_device_get_match_data() NULL check. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201126124643.3371-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-09serial_core: Check for port state when tty is in error stateAlexey Kardashevskiy
At the moment opening a serial device node (such as /dev/ttyS3) succeeds even if there is no actual serial device behind it. Reading/writing/ioctls fail as expected because the uart port is not initialized (the type is PORT_UNKNOWN) and the TTY_IO_ERROR error state bit is set fot the tty. However setting line discipline does not have these checks 8250_port.c (8250 is the default choice made by univ8250_console_init()). As the result of PORT_UNKNOWN, uart_port::iobase is NULL which a platform translates onto some address accessing which produces a crash like below. This adds tty_port_initialized() to uart_set_ldisc() to prevent the crash. Found by syzkaller. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Link: https://lore.kernel.org/r/20201203055834.45838-1-aik@ozlabs.ru Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04tty/serial/imx: Enable TXEN bit in imx_poll_init().Mingrui Ren
As described in Documentation, poll_init() is called by kgdb to initialize hardware which supports both poll_put_char() and poll_get_char(). It's necessary to enable TXEN bit, otherwise, it will cause hardware fault and kernel panic when calling imx_poll_put_char(). Generally, if use /dev/ttymxc0 as kgdb console as well as system console, ttymxc0 is initialized early by system console which does enable TXEN bit.But when use /dev/ttymxc1 as kgbd console, ttymxc1 is only initialized by imx_poll_init() cannot enable the TXEN bit, which will cause kernel panic. Signed-off-by: Mingrui Ren <jiladahe1997@gmail.com> Link: https://lore.kernel.org/r/20201202072543.151-1-972931182@qq.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04tty : serial: jsm: Fixed file by adding spacingClement Smith
Fixed a coding style issue Signed-off-by: Clement Smith <rclemsmith@gmail.com> Link: https://lore.kernel.org/r/20201202060916.34130-1-rclemsmith@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04tty: serial: uartlite: Support probe deferralAlexander Sverdlin
Give uartlite a chance to be probed when IRQ controller will be finally available and return potential -EPROBE_DEFER as-is. The condition "<=" has been changed to "<" to follow the recommendation in the header of platform_get_irq(). Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Link: https://lore.kernel.org/r/20201127101953.23700-1-alexander.sverdlin@nokia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-04earlycon: simplify earlycon-table implementationJohan Hovold
Instead of using the array-of-pointers trick to avoid having gcc mess up the earlycon array stride, specify type alignment when declaring entries to prevent gcc from increasing alignment. This is essentially an alternative (one-line) fix to the problem addressed by commit dd709e72cb93 ("earlycon: Use a pointer table to fix __earlycon_table stride"). gcc can increase the alignment of larger objects with static extent as an optimisation, but this can be suppressed by using the aligned attribute when declaring variables. Note that we have been relying on this behaviour for kernel parameters for 16 years and it indeed hasn't changed since the introduction of the aligned attribute in gcc-3.1. Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20201123102319.8090-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26tty: serial: bcm63xx: lower driver dependenciesRafał Miłecki
Hardware supported by bcm63xx is also used by BCM4908 SoCs family that is ARM64. In future more architectures may need it as well. There is nothing arch specific breaking compilation so just stick to requiring COMMON_CLK. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Link: https://lore.kernel.org/r/20201125090608.28442-1-zajec5@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26serial: mxs-auart: Remove unneeded platform_device_idFabio Estevam
The mxs-auart driver is only used for DT platforms and there is no need to use the platform_device_id structure. Get rid the platform_device_id structure and retrieve the data via of_device_get_match_data(), which simplifies the code. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201123190438.5636-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-26serial: 8250-mtk: Fix reference leak in mtk8250_probeZhang Qilong
The pm_runtime_enable will increase power disable depth. Thus a pairing decrement is needed on the error handling path to keep it balanced according to context. Fixes: e32a83c70cf98 ("serial: 8250-mtk: modify mtk uart power and clock management") Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201119141126.168850-1-zhangqilong3@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-23m68k: Fix WARNING splat in pmac_zilog driverFinn Thain
Don't add platform resources that won't be used. This avoids a recently-added warning from the driver core, that can show up on a multi-platform kernel when !MACH_IS_MAC. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at drivers/base/platform.c:224 platform_get_irq_optional+0x8e/0xce 0 is an invalid IRQ number Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.9.0-multi #1 Stack from 004b3f04: 004b3f04 00462c2f 00462c2f 004b3f20 0002e128 004754db 004b6ad4 004b3f4c 0002e19c 004754f7 000000e0 00285ba0 00000009 00000000 004b3f44 ffffffff 004754db 004b3f64 004b3f74 00285ba0 004754f7 000000e0 00000009 004754db 004fdf0c 005269e2 004fdf0c 00000000 004b3f88 00285cae 004b6964 00000000 004fdf0c 004b3fac 0051cc68 004b6964 00000000 004b6964 00000200 00000000 0051cc3e 0023c18a 004b3fc0 0051cd8a 004fdf0c 00000002 0052b43c 004b3fc8 Call Trace: [<0002e128>] __warn+0xa6/0xd6 [<0002e19c>] warn_slowpath_fmt+0x44/0x76 [<00285ba0>] platform_get_irq_optional+0x8e/0xce [<00285ba0>] platform_get_irq_optional+0x8e/0xce [<00285cae>] platform_get_irq+0x12/0x4c [<0051cc68>] pmz_init_port+0x2a/0xa6 [<0051cc3e>] pmz_init_port+0x0/0xa6 [<0023c18a>] strlen+0x0/0x22 [<0051cd8a>] pmz_probe+0x34/0x88 [<0051cde6>] pmz_console_init+0x8/0x28 [<00511776>] console_init+0x1e/0x28 [<0005a3bc>] printk+0x0/0x16 [<0050a8a6>] start_kernel+0x368/0x4ce [<005094f8>] _sinittext+0x4f8/0xc48 random: get_random_bytes called from print_oops_end_marker+0x56/0x80 with crng_init=0 ---[ end trace 392d8e82eed68d6c ]--- Commit a85a6c86c25b ("driver core: platform: Clarify that IRQ 0 is invalid"), which introduced the WARNING, suggests that testing for irq == 0 is undesirable. Instead of that comparison, just test for resource existence. Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Joshua Thompson <funaho@jurai.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: stable@vger.kernel.org # v5.8+ Reported-by: Laurent Vivier <laurent@vivier.eu> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/0c0fe1e4f11ccec202d4df09ea7d9d98155d101a.1606001297.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-11-23Merge 5.10-rc5 into tty-nextGreg Kroah-Hartman
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18serial: imx: Remove unused .id_table supportFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing .id_table support in this driver was only useful for old non-devicetree platforms. Get rid of the .id_table since it is no longer used. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201115110341.22761-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13tty: serial: pmac_zilog: Remove unused disposable variable 'garbage'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/pmac_zilog.h:365:58: warning: variable ‘garbage’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linux-serial@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112105857.2078977-5-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-13tty: serial: 8250: 8250_port: Move prototypes to shared locationLee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/8250/8250_port.c:349:14: warning: no previous prototype for ‘au_serial_in’ [-Wmissing-prototypes] drivers/tty/serial/8250/8250_port.c:359:6: warning: no previous prototype for ‘au_serial_out’ [-Wmissing-prototypes] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Mike Hudson <Exoray@isys.ca> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201112105857.2078977-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12serial: imx: Remove unused platform data supportFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform and the existing platform data support in this driver was only useful for old non-devicetree platforms. Get rid of the platform data support since it is no longer used. Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20201110214840.16768-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12serial: 8250: 8250_omap: Fix unused variable warningVignesh Raghavendra
With commit 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable"), below warning is seen with W=1 and CONFIG_SERIAL_8250_DMA is disabled: drivers/tty/serial/8250/8250_omap.c:1199:42: warning: unused variable 'k3_soc_devices' [-Wunused-const-variable] Fix this by moving the code using k3_soc_devices array to omap_serial_fill_features_erratas() that handles other errata flags as well. Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20201111112653.2710-2-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12serial: 8250: 8250_omap: Fix possible array out of bounds accessVignesh Raghavendra
k3_soc_devices array is missing a sentinel entry which may result in out of bounds access as reported by kernel KASAN. Fix this by adding a sentinel entry. Fixes: 439c7183e5b9 ("serial: 8250: 8250_omap: Disable RX interrupt after DMA enable") Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20201111112653.2710-1-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12serial: ar933x_uart: disable clk on error handling path in probeZheng Zengkai
ar933x_uart_probe() does not invoke clk_disable_unprepare() on one error handling path. This patch fixes that. Fixes: 9be1064fe524 ("serial: ar933x_uart: add RS485 support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Link: https://lore.kernel.org/r/20201111124426.42638-1-zhengzengkai@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12tty: serial: imx: keep console clocks always onFugang Duan
For below code, there has chance to cause deadlock in SMP system: Thread 1: clk_enable_lock(); pr_info("debug message"); clk_enable_unlock(); Thread 2: imx_uart_console_write() clk_enable() clk_enable_lock(); Thread 1: Acuired clk enable_lock -> printk -> console_trylock_spinning Thread 2: console_unlock() -> imx_uart_console_write -> clk_disable -> Acquite clk enable_lock So the patch is to keep console port clocks always on like other console drivers. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fugang Duan <fugang.duan@nxp.com> Link: https://lore.kernel.org/r/20201111025136.29818-1-fugang.duan@nxp.com Cc: stable <stable@vger.kernel.org> [fix up build warning - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-12tty: serial: imx: fix potential deadlockSam Nobs
Enabling the lock dependency validator has revealed that the way spinlocks are used in the IMX serial port could result in a deadlock. Specifically, imx_uart_int() acquires a spinlock without disabling the interrupts, meaning that another interrupt could come along and try to acquire the same spinlock, potentially causing the two to wait for each other indefinitely. Use spin_lock_irqsave() instead to disable interrupts upon acquisition of the spinlock. Fixes: c974991d2620 ("tty:serial:imx: use spin_lock instead of spin_lock_irqsave in isr") Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sam Nobs <samuel.nobs@taitradio.com> Link: https://lore.kernel.org/r/1604955006-9363-1-git-send-email-samuel.nobs@taitradio.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-09drivers/tty/serial: add LiteUART driverFilip Kokosinski
This commit adds driver for the FPGA-based LiteUART serial controller from LiteX SoC builder. The current implementation supports LiteUART configured for 32 bit data width and 8 bit CSR bus width. It does not support IRQ. Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com> Signed-off-by: Mateusz Holenko <mholenko@antmicro.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stafford Horne <shorne@gmail.com>
2020-11-09Merge 5.10-rc3 into tty-nextGreg Kroah-Hartman
We need the TTY/vt/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06serial: txx9: add missing platform_driver_unregister() on error in ↵Qinglang Miao
serial_txx9_init Add the missing platform_driver_unregister() before return from serial_txx9_init in the error handling case when failed to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI defined. Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabledLucas Stach
Since 699cc4dfd140 (tty: serial: imx: add imx earlycon driver), the earlycon part of imx serial is a separate driver and isn't necessarily enabled anymore when the console is enabled. This causes users to loose the earlycon functionality when upgrading their kenrel configuration via oldconfig. Enable earlycon by default when IMX_SERIAL_CONSOLE is enabled. Fixes: 699cc4dfd140 (tty: serial: imx: add imx earlycon driver) Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20201105204026.1818219-1-l.stach@pengutronix.de Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06serial: 8250_mtk: Fix uart_get_baud_rate warningClaire Chang
Mediatek 8250 port supports speed higher than uartclk / 16. If the baud rates in both the new and the old termios setting are higher than uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered. Passing NULL as the old termios so uart_get_baud_rate() will use uartclk / 16 - 1 as the new baud rate which will be replaced by the original baud rate later by tty_termios_encode_baud_rate() in mtk8250_set_termios(). Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping") Signed-off-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: msm_serial: Constify msm_uart_popsRikard Falkeborn
The only usage of msm_uart_pops is to assign its address to the ops field in the uart_port struct, which is a pointer to const. Make it const to allow the compiler to put it in read-only memory. Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201104235134.17793-1-rikard.falkeborn@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06serial: 8250: 8250_omap: Disable RX interrupt after DMA enableVignesh Raghavendra
UARTs on TI SoCs prior to J7200 don't provide independent control over RX FIFO not empty interrupt (RHR_IT) and RX timeout interrupt. Starting with J7200 SoC, its possible to disable RHR_IT independent of RX timeout interrupt using bit 2 of IER2 register. So disable RHR_IT once RX DMA is started so as to avoid spurious interrupt being raised when data is in the RX FIFO but is yet to be drained by DMA (a known errata in older SoCs). Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Link: https://lore.kernel.org/r/20201029051930.7097-1-vigneshr@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: linflexuart: Remove unnecessary '|' operation and add error countLiu Xiang
The '|' operation of status in linflex_rxint is unnecessary, so it can be removed. Signed-off-by: Liu Xiang <liuxiang_1999@126.com> Link: https://lore.kernel.org/r/1604065391-3790-1-git-send-email-liuxiang_1999@126.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06serial: mctrl_gpio: Fix passing zero to 'ERR_PTR' warningYueHaibing
drivers/tty/serial/serial_mctrl_gpio.c:214 mctrl_gpio_init() warn: passing zero to 'ERR_PTR' gpiod_to_irq() never return 0, so remove the useless test and make code more clear. Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20201031030530.1304-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: remove pnx8xxx uart driverThomas Bogendoerfer
Commit 625326ea9c84 ("MIPS: Remove PNX833x alias NXP_STB22x") removed support for PNX833x, so it's time to remove serial driver, too. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20201106130332.103476-1-tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: serial-tegra: Provide some missing struct member descriptionsLee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'fifo_mode_enable_status' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'uart_max_port' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'max_dma_burst_bytes' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'error_tolerance_low_range' not described in 'tegra_uart_chip_data' drivers/tty/serial/serial-tegra.c:94: warning: Function parameter or member 'error_tolerance_high_range' not described in 'tegra_uart_chip_data' Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-serial@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-31-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: stm32-usart: Remove set but unused 'cookie' variablesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/stm32-usart.c: In function ‘stm32_transmit_chars_dma’: drivers/tty/serial/stm32-usart.c:353:15: warning: variable ‘cookie’ set but not used [-Wunused-but-set-variable] drivers/tty/serial/stm32-usart.c: In function ‘stm32_of_dma_rx_probe’: drivers/tty/serial/stm32-usart.c:1090:15: warning: variable ‘cookie’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Gerald Baeza <gerald.baeza@st.com> Cc: linux-serial@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-29-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: sifive: Struct headers should start with 'struct <name>'Lee Jones
Also supply a missing member description. Fixes the following W=1 kernel build warning(s): drivers/tty/serial/sifive.c:157: warning: cannot understand function prototype: 'struct sifive_serial_port ' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: linux-serial@vger.kernel.org Cc: linux-riscv@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20201104193549.4026187-26-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: serial-tegra: Struct headers should start with 'struct <name>'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/serial-tegra.c:85: warning: cannot understand function prototype: 'struct tegra_uart_chip_data ' Cc: Laxman Dewangan <ldewangan@nvidia.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-serial@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-25-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: xilinx_uartps: Supply description for missing member 'cts_override'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/xilinx_uartps.c:205: warning: Function parameter or member 'cts_override' not described in 'cdns_uart' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Michal Simek <michal.simek@xilinx.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-23-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: ifx6x60: Fix function documentation headersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/ifx6x60.c:553: warning: Function parameter or member 'tty' not described in 'ifx_port_activate' drivers/tty/serial/ifx6x60.c:728: warning: Function parameter or member 't' not described in 'ifx_spi_io' drivers/tty/serial/ifx6x60.c:728: warning: Excess function parameter 'data' description in 'ifx_spi_io' Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Filip Aben <f.aben@option.com> Cc: Joseph Barrow <d.barow@option.com> Cc: Jan Dumon <j.dumon@option.com> Cc: Russ Gorby <russ.gorby@intel.com> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-22-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: msm_serial: Remove set but unused variable 'status'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/msm_serial.c: In function ‘msm_complete_tx_dma’: drivers/tty/serial/msm_serial.c:429:18: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Robert Love <rlove@google.com> Cc: linux-arm-msm@vger.kernel.org Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Link: https://lore.kernel.org/r/20201104193549.4026187-21-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: lpc32xx_hs: Remove unused variable 'tmp'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/lpc32xx_hs.c: In function ‘__serial_uart_flush’: drivers/tty/serial/lpc32xx_hs.c:244:6: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Vladimir Zapolskiy <vz@mleia.com> Cc: Sylvain Lemieux <slemieux.tyco@gmail.com> Cc: Kevin Wells <kevin.wells@nxp.com> Cc: Roland Stigge <stigge@antcom.de> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Link: https://lore.kernel.org/r/20201104193549.4026187-20-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: amba-pl011: Mark 'sbsa_uart_acpi_match' as __maybe_unusedLee Jones
When !ACPI 'sbsa_uart_acpi_match' is not referenced. Fixes the following W=1 kernel build warning(s): drivers/tty/serial/amba-pl011.c:2792:36: warning: ‘sbsa_uart_acpi_match’ defined but not used [-Wunused-const-variable=] Cc: Russell King <linux@armlinux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-18-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: 8250: serial_cs: Remove unused/unchecked variable 'err'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/8250/serial_cs.c: In function ‘multi_config’: drivers/tty/serial/8250/serial_cs.c:562:7: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Colin Ian King <colin.king@canonical.com> Cc: "David A. Hinds" <dahinds@users.sourceforge.net> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-15-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-06tty: serial: jsm: jsm_cls: Remove unused variable 'discard'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/tty/serial/jsm/jsm_cls.c: In function ‘cls_copy_data_from_uart_to_queue’: drivers/tty/serial/jsm/jsm_cls.c:400:7: warning: variable ‘discard’ set but not used [-Wunused-but-set-variable] Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: linux-serial@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20201104193549.4026187-12-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-04Merge 5.10-rc2 into tty-nextGreg Kroah-Hartman
We need the tty/vt/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-28tty: serial: fsl_lpuart: LS1021A has a FIFO size of 16 words, like LS1028AVladimir Oltean
Prior to the commit that this one fixes, the FIFO size was derived from the read-only register LPUARTx_FIFO[TXFIFOSIZE] using the following formula: TX FIFO size = 2 ^ (LPUARTx_FIFO[TXFIFOSIZE] - 1) The documentation for LS1021A is a mess. Under chapter 26.1.3 LS1021A LPUART module special consideration, it mentions TXFIFO_SZ and RXFIFO_SZ being equal to 4, and in the register description for LPUARTx_FIFO, it shows the out-of-reset value of TXFIFOSIZE and RXFIFOSIZE fields as "011", even though these registers read as "101" in reality. And when LPUART on LS1021A was working, the "101" value did correspond to "16 datawords", by applying the formula above, even though the documentation is wrong again (!!!!) and says that "101" means 64 datawords (hint: it doesn't). So the "new" formula created by commit f77ebb241ce0 has all the premises of being wrong for LS1021A, because it relied only on false data and no actual experimentation. Interestingly, in commit c2f448cff22a ("tty: serial: fsl_lpuart: add LS1028A support"), Michael Walle applied a workaround to this by manually setting the FIFO widths for LS1028A. It looks like the same values are used by LS1021A as well, in fact. When the driver thinks that it has a deeper FIFO than it really has, getty (user space) output gets truncated. Many thanks to Michael for pointing out where to look. Fixes: f77ebb241ce0 ("tty: serial: fsl_lpuart: correct the FIFO depth size") Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20201023013429.3551026-1-vladimir.oltean@nxp.com Reviewed-by：Fugang Duan <fugang.duan@nxp.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-16 23:37:43 +0000