Age | Commit message (Collapse) | Author |
|
Call __set_current_state() instead of assigning the new state directly.
These interfaces also aid CONFIG_DEBUG_ATOMIC_SLEEP environments,
keeping track of who changed the state.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Get rid of magic numbers in LCD commands and replace them with defined
values, so that it's more obvious that the commands are doing.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove lcd.left_shift because it is only written to at some places but
never read from.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move more or less all LCD-related state into struct lcd
in order to get better cohesion; use bool instead of int
where it makes sense.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use a defined value instead of magic number comparison
for checking whether a module param value has been set.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Rework lcd_init method to make it a little bit more clear about
the precedence of the params, move LCD geometry and pins layout
to the LCD struct and thus make the LCD-related module params
effectively read-only.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make keypad_type and lcd_type module params read-only.
This step also starts making it more clear what is
the precedence of device params coming from different
sources (device profile, runtime module param values etc).
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Start decoupling module params from the actual device state,
both for lcd and keypad, by keeping the params read-only
and moving the device state to related structs.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Avoid magic number and use a comparison with a defined value instead
that checks whether module param has been set by the user to some
value at loading time.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Get rid of magic numbers indicating that the value of a module param
is not set. Use a defined value instead.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove useless function and let the kernel call the actual
init function directly.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Set default parport module param value to DEFAULT_PARPORT so that
a if-block can be avoided.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Give DEFAULT_KEYPAD and DEFAULT_LCD defines better names,
so that their meaning is emphasized.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the order of the module parameter declarations
so that it matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the order of the DEFAULT_* values redefines so that it
matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the order of the initial DEFAULT_* defines so that it
matches the Kconfig order.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Acked-By: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix the implementation of a single-open policy for both
devices (lcd and keypad) by using atomic_t instead of plain ints.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove Lindent task from TODO file as it's obsolete.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix "warning: missing initializer [-Wmissing-field-initializers]"
by using designated struct initializers.
Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed one instance of the following checkpatch.pl warning in
panel.c:
WARNING: else is not generally useful after a break or return
Signed-off-by: Vincent Heuken <me@vincentheuken.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Style-only modifications to comply with checkpatch.pl --strict --file.
. Breaks down compound assignments.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Style-only modifications to comply with checkpatch.pl --strict --file.
. Correctly realigns the lines that needed to be ;
. Suppress useless blank rows ;
. Fix sizeof() issues in various -malloc() functions.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Style-only modifications to comply with checkpatch.pl --strict --file.
. Adds every missing brace in condition statements.
Signed-off-by: Dominique van den Broeck <domdevlin@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fix a regression in lcd_write caused by commit
70a8c3eb8546cefe40fb0bc7991e8899b7b91075
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes "Missing a blank line after declarations" checkpatch warnings in panel.c.
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes two sparse warnings related to keypad_read :
warning: incorrect type in argument 1 (different address spaces)
warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes two sparse warnings related to lcd_write :
warning: incorrect type in argument 1 (different address spaces)
warning: incorrect type in initializer (incompatible argument 2
(different address spaces))
lcd_write can be used from kernel space (in panel_lcd_print) or from user
space. So we introduce the lcd_write_char function that will write a char to
the device. We modify lcd_write and panel_lcd_print to use it. Finally we add
__user annotation missing in lcd_write.
Signed-off-by: Bastien Armand <armand.bastien@laposte.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use del_timer_sync to ensure that the timer is stopped on all CPUs before
the driver exists.
This change was suggested by Thomas Gleixner.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r@
declarer name module_exit;
identifier ex;
@@
module_exit(ex);
@@
identifier r.ex;
@@
ex(...) {
<...
- del_timer
+ del_timer_sync
(...)
...>
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl warning in panel.c:
WARNING: quoted string split across lines
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes the following checkpatch.pl issues in panel.c:
WARNING: space prohibited between function name and open parenthesis '('
Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
interruptible_sleep_on is racy and going away. This replaces the one
caller in the panel driver with the appropriate wait_event_interruptible
variant.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: devel@driverdev.osuosl.org
Cc: Willy Tarreau <willy@meta-x.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed 4 cases of line length issues with checkpatch. Checkpatch is now clean
for panel.c.
Signed-off-by: 'Jake Champlin <jake.champlin.27@gmail.com>'
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
applicable (fix sparse warnings)
sparse complains about the following functions:
panel.c:188:1: warning: symbol 'logical_inputs' was not declared. Should it be static?
panel.c:569:6: warning: symbol 'old_keypad_profile' was not declared. Should it be static?
panel.c:580:6: warning: symbol 'new_keypad_profile' was not declared. Should it be static?
panel.c:593:6: warning: symbol 'nexcom_keypad_profile' was not declared. Should it be static?
panel.c:672:6: warning: symbol 'pin_to_bits' was not declared. Should it be static?
panel.c:1375:6: warning: symbol 'panel_lcd_print' was not declared. Should it be static?
panel.c:1382:6: warning: symbol 'lcd_init' was not declared. Should it be static?
panel.c:2181:5: warning: symbol 'panel_init' was not declared. Should it be static?
Add the static keyword to silence these warnings and make sparse happy.
If structs or function parameters are used readonly they are also marked
as const.
CC: David Howells <dhowells@redhat.com>
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We changed the sizeof() statements in 429ccf058b "staging:panel: Fixed
coding conventions." so that they could fit inside the 80 character
line limit. Unfortunately, the new sizeof() statements are a smaller
size. This reverts it.
There isn't a nice way to stay within the 80 character limit without
a re-work so I've gone over.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"Whether" is spelled "wether" in several places. This fixes those that
are in the staging tree.
Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use spin_lock_irq() to quiet warning:
[ 8.232324] BUG: spinlock trylock failure on UP on CPU#0, reboot/85
[ 8.234138] lock: c161c760, .magic: dead4ead, .owner: reboot/85, .owner_cpu: 0
[ 8.236132] Pid: 85, comm: reboot Not tainted 3.4.0-rc7-00656-g82163ed #5
[ 8.237965] Call Trace:
[ 8.238648] [<c13dfd20>] ? printk+0x18/0x1a
[ 8.239827] [<c122a5e0>] spin_dump+0x80/0xd0
[ 8.241016] [<c122a652>] spin_bug+0x22/0x30
[ 8.242181] [<c122a93b>] do_raw_spin_trylock+0x5b/0x70
[ 8.243611] [<c13e8bae>] _raw_spin_trylock+0xe/0x60
[ 8.244975] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0
==> [ 8.246638] [<c13922ea>] panel_scan_timer+0xba/0x570
[ 8.248019] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0
[ 8.249689] [<c102f6f5>] run_timer_softirq+0x1e5/0x370
[ 8.251191] [<c102f645>] ? run_timer_softirq+0x135/0x370
[ 8.252718] [<c1392230>] ? keypad_send_key.constprop.9+0xe0/0xe0
[ 8.254462] [<c102a592>] __do_softirq+0xc2/0x1c0
[ 8.255758] [<c102a4d0>] ? local_bh_enable_ip+0x130/0x130
[ 8.257228] <IRQ> [<c102a855>] ? irq_exit+0x65/0x70
[ 8.258647] [<c1013ff9>] ? smp_apic_timer_interrupt+0x49/0x80
[ 8.260226] [<c13e96c1>] ? apic_timer_interrupt+0x31/0x38
[ 8.261737] [<c12700e0>] ? drm_vm_open_locked+0x70/0xb0
[ 8.263166] [<c122489a>] ? delay_tsc+0x1a/0x30
[ 8.264452] [<c12248c9>] ? __delay+0x9/0x10
[ 8.265621] [<c12248ec>] ? __const_udelay+0x1c/0x20
==> [ 8.266967] [<c139136c>] ? lcd_clear_fast_p8+0x9c/0xe0
[ 8.268386] [<c1391a66>] ? lcd_write+0x226/0x810
[ 8.269653] [<c1367900>] ? md_set_readonly+0xc0/0xc0
[ 8.271013] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0
[ 8.272470] [<c1392a98>] ? panel_lcd_print+0x38/0x40
[ 8.273837] [<c1392ace>] ? panel_notify_sys+0x2e/0x60
[ 8.275224] [<c1046634>] ? notifier_call_chain+0x84/0xb0
[ 8.276754] [<c10469ce>] ? __blocking_notifier_call_chain+0x3e/0x60
[ 8.278576] [<c1046a0a>] ? blocking_notifier_call_chain+0x1a/0x20
[ 8.280267] [<c1036a14>] ? kernel_restart_prepare+0x14/0x40
[ 8.281901] [<c1036a8e>] ? kernel_restart+0xe/0x50
[ 8.283216] [<c1036ce9>] ? sys_reboot+0x149/0x1e0
[ 8.284532] [<c10b3fb3>] ? handle_pte_fault+0x93/0xd70
[ 8.285956] [<c1019e35>] ? do_page_fault+0x215/0x5e0
[ 8.287330] [<c101a113>] ? do_page_fault+0x4f3/0x5e0
[ 8.288704] [<c1045ac6>] ? up_read+0x16/0x30
[ 8.289890] [<c101a113>] ? do_page_fault+0x4f3/0x5e0
[ 8.291252] [<c10d4486>] ? iterate_supers+0x86/0xd0
[ 8.292615] [<c122a9ed>] ? do_raw_spin_unlock+0x9d/0xe0
[ 8.294049] [<c13e8dcd>] ? _raw_spin_unlock+0x1d/0x20
[ 8.295449] [<c10d44ab>] ? iterate_supers+0xab/0xd0
[ 8.296795] [<c10fb620>] ? __sync_filesystem+0xa0/0xa0
[ 8.298199] [<c13e9b03>] ? sysenter_do_call+0x12/0x37
[ 8.306899] Restarting system.
[ 8.307747] machine restart
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now checkpatch clean.
$ find drivers/staging/panel -name "*.[ch]"|xargs ./scripts/checkpatch.pl \
-f --terse --nosummary|cut -f3- -d":"|sort |uniq -c|sort -n
2 WARNING: Single statement macros should not use a do {} while (0) loop
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
-Added pr_fmt.
-Converted printk(KERN_INFO to pr_info
-Removed embedded message prefixes.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
-Removed unnecessary OOM messages.
-Removed embedded message prefixes.
-Added __func__ to some pr_err messages.
-Converted printk(KERN_ERR to pr_err
-Refactored split printk strings onto a single line
-Removed the space before the '!'.
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Deleted #if 0 blocks
Signed-off-by: Toshiaki Yamane <yamanetoshi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The below patch fixes a typo I found while reading.
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Cc: Willy Tarreau <willy@meta-x.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove all #inclusions of asm/system.h preparatory to splitting and killing
it. Performed with the following command:
perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *`
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Fixed the checkpatch warning about sing simple_strtoul instead of
kstrtoul() in panel.c.
Signed-off-by: Pelle Windestam <iceaway@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
It was pointed out by 'make versioncheck' that include of
linux/version.h is not needed in drivers/staging/panel/panel.c
This patch removes it.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.
The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.
New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time. Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.
The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.
Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.
Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.
===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
// but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}
@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}
@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}
@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
*off = E
|
*off += E
|
func(..., off, ...)
|
E = *off
)
...+>
}
@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}
@ fops0 @
identifier fops;
@@
struct file_operations fops = {
...
};
@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
.llseek = llseek_f,
...
};
@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
.read = read_f,
...
};
@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
.write = write_f,
...
};
@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
.open = open_f,
...
};
// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
... .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};
@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
... .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};
// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
... .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};
// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};
// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};
@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+ .llseek = default_llseek, /* write accesses f_pos */
};
// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////
@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
.write = write_f,
.read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};
@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};
@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};
@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
|
|
panel_attach() poorly handles errors. On error unregister everything we
have registered.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
panel_bind_key() must free allocated memory.
Signed-off-by: Kulikov Vasiliy <segooon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
We have nice method simple_strtoul() to convert string to numbers which
could be used here.
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
|
|
These could not be detected by the semantic patch.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch prevents the code from calling parport_release and
parport_unregister_device twice with the same arguments - and thus fixes an oops.
Rationale:
After the first call the parport is already released and the
handle isn't valid anymore and calling parport_release and
parport_unregister_device twice isn't a good idea.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Cc: stable <stable@kernel.org>
Acked-by: Willy Tarreau <w@1wt.eu>
|