summaryrefslogtreecommitdiffstats
path: root/drivers/soc
AgeCommit message (Collapse)Author
2018-08-18Merge tag 'rproc-v4.19' of git://github.com/andersson/remoteprocLinus Torvalds
Pull remoteproc updates from Bjorn Andersson: "This adds support for pre-start and post-shutdown hooks for remoteproc subdevices, refactors the Qualcomm Hexagon support to allow reuse between several drivers, makes authentication in the MDT file loader optional, migrates a few format strings to use %pK and migrates the Davinci driver to use the reset framework" * tag 'rproc-v4.19' of git://github.com/andersson/remoteproc: remoteproc/davinci: use the reset framework remoteproc/davinci: Mark error recovery as disabled remoteproc: st_slim: replace "%p" with "%pK" remoteproc: replace "%p" with "%pK" remoteproc: qcom: fix Q6V5_WCSS dependencies remoteproc: Reset table_ptr in rproc_start() failure paths remoteproc: qcom: q6v5-pil: fix modem hang on SDM845 after axis2 clk unvote remoteproc: qcom q6v5: fix modular build remoteproc: Introduce prepare and unprepare for subdevices remoteproc: rename subdev probe and remove functions remoteproc: Make client initialize ops in rproc_subdev remoteproc: Make start and stop in subdev optional remoteproc: Rename subdev functions to start/stop remoteproc: qcom: Introduce Hexagon V5 based WCSS driver remoteproc: qcom: q6v5-pil: Use common q6v5 helpers remoteproc: qcom: adsp: Use common q6v5 helpers remoteproc: q6v5: Extract common resource handling remoteproc: qcom: mdt_loader: Make the firmware authentication optional
2018-08-14Merge tag 'pm-4.19-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add a new framework for CPU idle time injection, to be used by all of the idle injection code in the kernel in the future, fix some issues and add a number of relatively small extensions in multiple places. Specifics: - Add a new framework for CPU idle time injection (Daniel Lezcano). - Add AVS support to the armada-37xx cpufreq driver (Gregory CLEMENT). - Add support for current CPU frequency reporting to the ACPI CPPC cpufreq driver (George Cherian). - Rework the cooling device registration in the imx6q/thermal driver (Bastian Stender). - Make the pcc-cpufreq driver refuse to work with dynamic scaling governors on systems with many CPUs to avoid scalability issues with it (Rafael Wysocki). - Fix the intel_pstate driver to report different maximum CPU frequencies on systems where they really are different and to ignore the turbo active ratio if hardware-managend P-states (HWP) are in use; make it use the match_string() helper (Xie Yisheng, Srinivas Pandruvada). - Fix a minor deferred probe issue in the qcom-kryo cpufreq driver (Niklas Cassel). - Add a tracepoint for the tracking of frequency limits changes (from Andriod) to the cpufreq core (Ruchi Kandoi). - Fix a circular lock dependency between CPU hotplug and sysfs locking in the cpufreq core reported by lockdep (Waiman Long). - Avoid excessive error reports on driver registration failures in the ARM cpuidle driver (Sudeep Holla). - Add a new device links flag to the driver core to make links go away automatically on supplier driver removal (Vivek Gautam). - Eliminate potential race condition between system-wide power management transitions and system shutdown (Pingfan Liu). - Add a quirk to save NVS memory on system suspend for the ASUS 1025C laptop (Willy Tarreau). - Make more systems use suspend-to-idle (instead of ACPI S3) by default (Tristian Celestin). - Get rid of stack VLA usage in the low-level hibernation code on 64-bit x86 (Kees Cook). - Fix error handling in the hibernation core and mark an expected fall-through switch in it (Chengguang Xu, Gustavo Silva). - Extend the generic power domains (genpd) framework to support attaching a device to a power domain by name (Ulf Hansson). - Fix device reference counting and user limits initialization in the devfreq core (Arvind Yadav, Matthias Kaehlcke). - Fix a few issues in the rk3399_dmc devfreq driver and improve its documentation (Enric Balletbo i Serra, Lin Huang, Nick Milner). - Drop a redundant error message from the exynos-ppmu devfreq driver (Markus Elfring)" * tag 'pm-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (35 commits) PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through cpufreq: intel_pstate: Ignore turbo active ratio in HWP cpufreq: Fix a circular lock dependency problem cpu/hotplug: Add a cpus_read_trylock() function x86/power/hibernate_64: Remove VLA usage cpufreq: trace frequency limits change cpufreq: intel_pstate: Show different max frequency with turbo 3 and HWP cpufreq: pcc-cpufreq: Disable dynamic scaling on many-CPU systems cpufreq: qcom-kryo: Silently error out on EPROBE_DEFER cpufreq / CPPC: Add cpuinfo_cur_freq support for CPPC cpufreq: armada-37xx: Add AVS support dt-bindings: marvell: Add documentation for the Armada 3700 AVS binding PM / devfreq: rk3399_dmc: Fix duplicated opp table on reload. PM / devfreq: Init user limits from OPP limits, not viceversa PM / devfreq: rk3399_dmc: fix spelling mistakes. PM / devfreq: rk3399_dmc: do not print error when get supply and clk defer. dt-bindings: devfreq: rk3399_dmc: move interrupts to be optional. PM / devfreq: rk3399_dmc: remove wait for dcf irq event. dt-bindings: clock: add rk3399 DDR3 standard speed bins. ...
2018-08-14Merge branches 'pm-core', 'pm-domains', 'pm-sleep', 'acpi-pm' and 'pm-cpuidle'Rafael J. Wysocki
Merge changes in the PM core, system-wide PM infrastructure, generic power domains (genpd) framework, ACPI PM infrastructure and cpuidle for 4.19. * pm-core: driver core: Add flag to autoremove device link on supplier unbind driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMER * pm-domains: PM / Domains: Introduce dev_pm_domain_attach_by_name() PM / Domains: Introduce option to attach a device by name to genpd PM / Domains: dt: Add a power-domain-names property * pm-sleep: PM / reboot: Eliminate race between reboot and suspend PM / hibernate: Mark expected switch fall-through x86/power/hibernate_64: Remove VLA usage PM / hibernate: cast PAGE_SIZE to int when comparing with error code * acpi-pm: ACPI / PM: save NVS memory for ASUS 1025C laptop ACPI / PM: Default to s2idle in all machines supporting LP S0 * pm-cpuidle: ARM: cpuidle: silence error on driver registration failure
2018-08-10Merge branch 'regulator-4.19' into regulator-nextMark Brown
2018-07-21soc: qcom: rmtfs-mem: fix memleak in probe error pathsJohan Hovold
Make sure to set the mem device release callback before calling put_device() in a couple of probe error paths so that the containing object also gets freed. Fixes: d1de6d6c639b ("soc: qcom: Remote filesystem memory driver") Cc: stable <stable@vger.kernel.org> # 4.15 Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21soc: qcom: llc-slice: Add missing MODULE_LICENSE()Niklas Cassel
Add missing MODULE_LICENSE(). According to the SPDX-License-Identifier, the license is GPL v2. Fixes the following warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/soc/qcom/llcc-slice.o Fixes: a3134fb ("drivers: soc: Add LLCC driver") Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: fix unwanted error check for get_tcs_of_type()Raju P.L.S.S.S.N
The patch fixes the bug reported by Dan Carpenter. It removes the unnecessary err check for ‘tcs’ reported by static checker warning: drivers/soc/qcom/rpmh-rsc.c:111 tcs_invalidate() warn: 'tcs' isn't an ERR_PTR See also: drivers/soc/qcom/rpmh-rsc.c:178 get_tcs_for_msg() warn: 'tcs' isn't an ERR_PTR drivers/soc/qcom/rpmh-rsc.c:180 get_tcs_for_msg() warn: 'tcs' isn't an ERR_PTR https://www.spinics.net/lists/linux-soc/msg04624.html Fixes: 9a3afcf ("drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: fix the loop index check in get_req_from_tcsRaju P.L.S.S.S.N
get_req_from_tcs introduced in patch[1] returns tcs_request from tcs_group. The size of tcs (of type - tcs_group) array in rsc_drv is TCS_TYPE_NR. So the loop index needs to be iterated up to TCS_TYPE_NR only. [1] https://patchwork.kernel.org/patch/10477547/ Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: Check cmd_db_ready() to help childrenDouglas Anderson
Children of RPMh will need access to cmd_db. Rather than having each child have code to check if cmd_db is ready let's add the check to RPMh. With this we'll be able to remove this boilerplate code from clk-rpmh.c and qcom-rpmh-regulator.c. Neither of these files has landed upstream yet but patches are pretty far along. === This code is based upon v11 of Lina and Raju's RPMh series. Suggested-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: allow active requests from wake TCSLina Iyer
Some RSCs may only have sleep and wake TCS, i.e, there is no dedicated TCS for active mode request, but drivers may still want to make active requests from these RSCs. In such cases re-purpose the wake TCS to send active state requests. The requirement for this is that the driver is aware that the wake TCS is being repurposed to send active request, hence the sleep and wake TCSes be invalidated before the active request is sent. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: add support for batch RPMH requestLina Iyer
Platform drivers need make a lot of resource state requests at the same time, say, at the start or end of an usecase. It can be quite inefficient to send each request separately. Instead they can give the RPMH library a batch of requests to be sent and wait on the whole transaction to be complete. rpmh_write_batch() is a blocking call that can be used to send multiple RPMH command sets. Each RPMH command set is set asynchronously and the API blocks until all the command sets are complete and receive their tx_done callbacks. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: allow requests to be sent asynchronouslyLina Iyer
Platform drivers that want to send a request but do not want to block until the RPMH request completes have now a new API - rpmh_write_async(). The API allocates memory and send the requests and returns the control back to the platform driver. The tx_done callback from the controller is handled in the context of the controller's thread and frees the allocated memory. This API allows RPMH requests from atomic contexts as well. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: cache sleep/wake state requestsLina Iyer
Active state requests are sent immediately to the RSC controller, while sleep and wake state requests are cached in this driver to avoid taxing the RSC controller repeatedly. The cached values will be sent to the controller when the rpmh_flush() is called. Generally, flushing is a system PM activity and may be called from the system PM drivers when the system is entering suspend or deeper sleep modes during cpuidle. Also allow invalidating the cached requests, so they may be re-populated again. Signed-off-by: Lina Iyer <ilina@codeaurora.org> [rplsssn: remove unneeded semicolon, address line over 80chars error] Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCSLina Iyer
Allow sleep and wake commands to be cleared from the respective TCSes, so that they can be re-populated. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: write sleep/wake requests to TCSLina Iyer
Sleep and wake requests are sent when the application processor subsystem of the SoC is entering deep sleep states like in suspend. These requests help lower the system power requirements when the resources are not in use. Sleep and wake requests are written to the TCS slots but are not triggered at the time of writing. The TCS are triggered by the firmware after the last of the CPUs has executed its WFI. Since these requests may come in different batches of requests, it is the job of this controller driver to find and arrange the requests into the available TCSes. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh: add RPMH helper functionsLina Iyer
Sending RPMH requests and waiting for response from the controller through a callback is common functionality across all platform drivers. To simplify drivers, add a library functions to create RPMH client and send resource state requests. rpmh_write() is a synchronous blocking call that can be used to send active state requests. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: log RPMH requests in FTRACELina Iyer
Log sent RPMH requests and interrupt responses in FTRACE. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> [rplsssn@codeaurora.org: rebase to v4.18-rc1 & fix merge conflict] Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCsLina Iyer
Add controller driver for QCOM SoCs that have hardware based shared resource management. The hardware IP known as RSC (Resource State Coordinator) houses multiple Direct Resource Voter (DRV) for different execution levels. A DRV is a unique voter on the state of a shared resource. A Trigger Control Set (TCS) is a bunch of slots that can house multiple resource state requests, that when triggered will issue those requests through an internal bus to the Resource Power Manager Hardened (RPMH) blocks. These hardware blocks are capable of adjusting clocks, voltages, etc. The resource state request from a DRV are aggregated along with state requests from other processors in the SoC and the aggregate value is applied on the resource. Some important aspects of the RPMH communication - - Requests are <addr, value> with some header information - Multiple requests (upto 16) may be sent through a TCS, at a time - Requests in a TCS are sent in sequence - Requests may be fire-n-forget or completion (response expected) - Multiple TCS from the same DRV may be triggered simultaneously - Cannot send a request if another request for the same addr is in progress from the same DRV - When all the requests from a TCS are complete, an IRQ is raised - The IRQ handler needs to clear the TCS before it is available for reuse - TCS configuration is specific to a DRV - Platform drivers may use DRV from different RSCs to make requests Resource state requests made when CPUs are active are called 'active' state requests. Requests made when all the CPUs are powered down (idle state) are called 'sleep' state requests. They are matched by a corresponding 'wake' state requests which puts the resources back in to previously requested active state before resuming any CPU. TCSes are dedicated for each type of requests. Active mode TCSes (AMC) are used to send requests immediately to the resource, while control TCS are used to provide specific information to the controller. Sleep and Wake TCS send sleep and wake requests, after and before the system halt respectively. Signed-off-by: Lina Iyer <ilina@codeaurora.org> Signed-off-by: Raju P.L.S.S.S.N <rplsssn@codeaurora.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21drivers: soc: Add LLCC driverRishabh Bhatnagar
LLCC (Last Level Cache Controller) provides additional cache memory in the system. LLCC is partitioned into multiple slices and each slice gets its own priority, size, ID and other config parameters. LLCC driver programs these parameters for each slice. Clients that are assigned to use LLCC need to get information such size & ID of the slice they get and activate or deactivate the slice as needed. LLCC driver provides API for the clients to perform these operations. Signed-off-by: Channagoud Kadabi <ckadabi@codeaurora.org> Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-21soc: qcom: smem: Correct check for global partitionBjorn Andersson
The moved check for the global partition ended up in the wrong place and I failed to spot this in my review. This moves it to the correct place. Fixes: 11d2e7edac6a ("soc: qcom: smem: check sooner in qcom_smem_set_global_partition()") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Alex Elder <elder@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-07-19Merge tag 'imx-fixes-4.18-3' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.18, round 3: - Restrict GPC driver on register range that is accessible by regmap, so that we can avoid user space from triggering imprecise external abort exception. * tag 'imx-fixes-4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: soc: imx: gpc: restrict register range for regmap access Signed-off-by: Olof Johansson <olof@lixom.net>
2018-07-19soc: imx: gpc: restrict register range for regmap accessAnson Huang
GPC registers are NOT continuous, some registers are reserved and accessing them from userspace will trigger external abort, add regmap register access table to avoid below abort: root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers [ 108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004 [ 108.487985] pgd = 42b54bfd [ 108.490741] [b6db5004] *pgd=ba1b7831 [ 108.494386] Internal error: : 1406 [#1] SMP ARM [ 108.498943] Modules linked in: [ 108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482 [ 108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree) [ 108.516123] PC is at regmap_mmio_read32le+0x20/0x24 [ 108.521031] LR is at regmap_mmio_read+0x40/0x60 [ 108.525586] pc : [<c059cf74>] lr : [<c059d1ac>] psr: 20060093 [ 108.531875] sp : eccf1d98 ip : eccf1da8 fp : eccf1da4 [ 108.537122] r10: ec2d3800 r9 : eccf1f60 r8 : ecfc0000 [ 108.542370] r7 : eccf1e2c r6 : eccf1e2c r5 : 00000028 r4 : ec338e00 [ 108.548920] r3 : 00000000 r2 : eccf1e2c r1 : f0980028 r0 : 00000000 [ 108.555474] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 108.562720] Control: 10c5387d Table: acf4004a DAC: 00000051 [ 108.568491] Process cat (pid: 389, stack limit = 0xd4318a65) [ 108.574174] Stack: (0xeccf1d98 to 0xeccf2000) Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-09driver core: Rename flag AUTOREMOVE to AUTOREMOVE_CONSUMERVivek Gautam
Now that we want to add another flag to autoremove the device link on supplier unbind, it's fair to rename the existing flag from DL_FLAG_AUTOREMOVE to DL_FLAG_AUTOREMOVE_CONSUMER so that we can add similar flag for supplier later. And, while we are touching device.h, fix a doc build warning. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-06-26Merge tag 'qcom-fixes-for-4.18-rc2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes Qualcomm Fixes for v4.18-rc2 * Fix compiler warnings for cmd-db driver * tag 'qcom-fixes-for-4.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependency Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-25qcom: cmd-db: enforce CONFIG_OF_RESERVED_MEM dependencyArnd Bergmann
Without CONFIG_OF_RESERVED_MEM, gcc sees that the global cmd_db_header variable is never initialized, and through code optimization concludes that a lot of other code cannot possibly work after that: drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_addr': drivers/soc/qcom/cmd-db.c:197:21: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le32_to_cpu(ent.addr); drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data': drivers/soc/qcom/cmd-db.c:224:10: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] ent_len = le16_to_cpu(ent.len); drivers/soc/qcom/cmd-db.c:115:6: error: 'rsc_hdr.data_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 offset = le16_to_cpu(hdr->data_offset); ^~~~~~ drivers/soc/qcom/cmd-db.c:116:6: error: 'ent.offset' may be used uninitialized in this function [-Werror=maybe-uninitialized] u16 loffset = le16_to_cpu(ent->offset); ^~~~~~~ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_aux_data_len': drivers/soc/qcom/cmd-db.c:250:38: error: 'ent.len' may be used uninitialized in this function [-Werror=maybe-uninitialized] return ret < 0 ? 0 : le16_to_cpu(ent.len); ^ drivers/soc/qcom/cmd-db.c: In function 'cmd_db_read_slave_id': drivers/soc/qcom/cmd-db.c:272:7: error: 'ent.addr' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using a hard CONFIG_OF_RESERVED_MEM dependency avoids this warning, and we can remove the CONFIG_OF dependency. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-06-23Merge tag 'imx-fixes-4.18' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.18: - Fix i.MX6SX PCIe MSI interrupt number, so that MSI IRQs can be properly propagated to the upstream interrupt controller. - Fix GPCv2 MIPI/PCIe/USB_HSIC's PGC offset. The values in Reference Manual are incorrect. - Correct SDMA setting for i.MX6Q SPI5 device to fix the issue, that the SPI controller RX FIFO was not empty after a DMA transfer, and the driver gets stuck in the next PIO transfer when reading one word more than expected. * tag 'imx-fixes-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6sx: fix irq for pcie bridge soc: imx: gpcv2: correct PGC offset ARM: dts: imx6q: Use correct SDMA script for SPI5 core Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-23Merge tag 'renesas-fixes-for-v4.18' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Renesas ARM Based SoC Fixes for v4.18 Make PM domain initialization more robust in Renesas R-Car SYSC driver. This resolves a regression due to re-parenting of PM domains by 086b399965a7ee7e ("soc: renesas: r8a77990-sysc: Add workaround for 3DG-{A,B}"). * tag 'renesas-fixes-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: soc: renesas: rcar-sysc: Make PM domain initialization more robust Signed-off-by: Olof Johansson <olof@lixom.net>
2018-06-18remoteproc: qcom: mdt_loader: Make the firmware authentication optionalSricharan R
qcom_mdt_load function loads the mdt type firmware and initialises the secure memory as well. Make the initialisation only when requested by the caller, so that the function can be used by self-authenticating remoteproc as well. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2018-06-17soc: imx: gpcv2: correct PGC offsetAnson Huang
Correct MIPI/PCIe/USB_HSIC's PGC offset based on design RTL, the values in the Reference Manual (Rev. 1, 01/2018 and the older ones) are incorrect. The correct offset values should be as below: 0x800 ~ 0x83F: PGC for core0 of A7 platform; 0x840 ~ 0x87F: PGC for core1 of A7 platform; 0x880 ~ 0x8BF: PGC for SCU of A7 platform; 0xA00 ~ 0xA3F: PGC for fastmix/megamix; 0xC00 ~ 0xC3F: PGC for MIPI PHY; 0xC40 ~ 0xC7F: PGC for PCIe_PHY; 0xC80 ~ 0xCBF: PGC for USB OTG1 PHY; 0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY; 0xD00 ~ 0xD3F: PGC for USB HSIC PHY; Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver") Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-06-15treewide: use PHYS_ADDR_MAX to avoid type casting ULLONG_MAXStefan Agner
With PHYS_ADDR_MAX there is now a type safe variant for all bits set. Make use of it. Patch created using a semantic patch as follows: // <smpl> @@ typedef phys_addr_t; @@ -(phys_addr_t)ULLONG_MAX +PHYS_ADDR_MAX // </smpl> Link: http://lkml.kernel.org/r/20180419214204.19322-1-stefan@agner.ch Signed-off-by: Stefan Agner <stefan@agner.ch> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-12Merge tag 'overflow-v4.18-rc1-part2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more overflow updates from Kees Cook: "The rest of the overflow changes for v4.18-rc1. This includes the explicit overflow fixes from Silvio, further struct_size() conversions from Matthew, and a bug fix from Dan. But the bulk of it is the treewide conversions to use either the 2-factor argument allocators (e.g. kmalloc(a * b, ...) into kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a * b) into vmalloc(array_size(a, b)). Coccinelle was fighting me on several fronts, so I've done a bunch of manual whitespace updates in the patches as well. Summary: - Error path bug fix for overflow tests (Dan) - Additional struct_size() conversions (Matthew, Kees) - Explicitly reported overflow fixes (Silvio, Kees) - Add missing kvcalloc() function (Kees) - Treewide conversions of allocators to use either 2-factor argument variant when available, or array_size() and array3_size() as needed (Kees)" * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits) treewide: Use array_size in f2fs_kvzalloc() treewide: Use array_size() in f2fs_kzalloc() treewide: Use array_size() in f2fs_kmalloc() treewide: Use array_size() in sock_kmalloc() treewide: Use array_size() in kvzalloc_node() treewide: Use array_size() in vzalloc_node() treewide: Use array_size() in vzalloc() treewide: Use array_size() in vmalloc() treewide: devm_kzalloc() -> devm_kcalloc() treewide: devm_kmalloc() -> devm_kmalloc_array() treewide: kvzalloc() -> kvcalloc() treewide: kvmalloc() -> kvmalloc_array() treewide: kzalloc_node() -> kcalloc_node() treewide: kzalloc() -> kcalloc() treewide: kmalloc() -> kmalloc_array() mm: Introduce kvcalloc() video: uvesafb: Fix integer overflow in allocation UBIFS: Fix potential integer overflow in allocation leds: Use struct_size() in allocation Convert intel uncore to struct_size ...
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-11Merge tag 'armsoc-late' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
2018-06-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This contains platform-related driver updates for ARM and ARM64. Highlights: - ARM SCMI (System Control & Management Interface) driver cleanups - Hisilicon support for LPC bus w/ ACPI - Reset driver updates for several platforms: Uniphier, - Rockchip power domain bindings and hardware descriptions for several SoCs. - Tegra memory controller reset improvements" * tag 'a