summaryrefslogtreecommitdiffstats
path: root/drivers/serial
AgeCommit message (Collapse)Author
2010-05-28ARM: S5PV210: serial: Fix section mismatch warningMarek Szyprowski
Rename the structure to avoid the following warning: WARNING: drivers/serial/built-in.o(.data+0x534): Section mismatch in reference from the variable s5p_serial_drv to the function .devexit.text:s3c24xx_serial_remove() The variable s5p_serial_drv references the function __devexit s3c24xx_serial_remove() If the reference is valid then annotate the variable with __exit* (see linux/init.h) or name the variable: *driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-25Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/xilinx: Fix compile error spi/davinci: Fix clock prescale factor computation spi: move bitbang txrx utility functions to private header spi/mpc5121: Add SPI master driver for MPC5121 PSC powerpc/mpc5121: move PSC FIFO memory init to platform code spi/ep93xx: implemented driver for Cirrus EP93xx SPI controller Documentation/spi/* compile warning fix spi/omap2_mcspi: Check params before dereference or use spi/omap2_mcspi: add turbo mode support spi/omap2_mcspi: change default DMA_MIN_BYTES value to 160 spi/pl022: fix stop queue procedure spi/pl022: add support for the PL023 derivate spi/pl022: fix up differences between ARM and ST versions spi/spi_mpc8xxx: Do not use map_tx_dma to unmap rx_dma spi/spi_mpc8xxx: Fix QE mode Litte Endian spi/spi_mpc8xxx: fix potential memory corruption.
2010-05-25m68knommu: fix broken use of BUAD_TABLE_SIZE in 68328serial driverGreg Ungerer
Commit 8b505ca8e2600eb9e7dd2d6b2682a81717671374 ("serial: 68328serial.c: remove BAUD_TABLE_SIZE macro") misses one use of BAUD_TABLE_SIZE. So the resulting 68328serial.c does not compile: drivers/serial/68328serial.c: In function `m68328_console_setup': drivers/serial/68328serial.c:1439: error: `BAUD_TABLE_SIZE' undeclared (first use in this function) drivers/serial/68328serial.c:1439: error: (Each undeclared identifier is reported only once drivers/serial/68328serial.c:1439: error: for each function it appears in.) Fix that last use of it. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Cc: Thiago Farina <tfransosi@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-25Merge remote branch 'origin' into secretlab/next-spiGrant Likely
2010-05-25powerpc/mpc5121: move PSC FIFO memory init to platform codeAnatolij Gustschin
Since PSC could also be used in other modes than UART mode we move PSC FIFO memory initialization from serial driver to common platform code. The initialized FIFO memory slices may not overlap, so the most easy way would be to configure them all at once at init time for all PSC devices. This is now done by this patch. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (25 commits) sh: fix up sh7785lcr_32bit_defconfig. arch/sh/lib/strlen.S: Checkpatch cleanup sh: fix up sh7786 dmaengine build. sh: guard cookie consistency across termination in the DMA driver sh: prevent the DMA driver from unloading, while in use sh: fix Oops in the serial SCI driver sh: allow platforms to specify SD-card supported voltages mmc: let MFD's provide supported Vdd card voltages to tmio_mmc sh: disable SD-card write-protection detection on kfr2r09 mfd: pass platform flags down to the tmio_mmc driver tmio: add a platform flag to disable card write-protection detection sh: Add SDHI DMA support to migor sh: Add SDHI DMA support to kfr2r09 sh: Add SDHI DMA support to ms7724se sh: Add SDHI DMA support to ecovec mmc: add DMA support to tmio_mmc driver, when used on SuperH sh: prepare the SDHI MFD driver to pass DMA configuration to tmio_mmc.c mmc: prepare tmio_mmc for passing of DMA configuration from the MFD cell sh: add DMA slave definitions to sh7724 sh: add DMA slaves for two SDHI controllers to sh7722 ...
2010-05-22sh: fix Oops in the serial SCI driverGuennadi Liakhovetski
Fix an Oops, triggering, if the DMA buffer allocation for the Rx channel in sh-sci.c fails. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-05-22Merge remote branch 'origin' into secretlab/next-devicetreeGrant Likely
Merging in current state of Linus' tree to deal with merge conflicts and build failures in vio.c after merge. Conflicts: drivers/i2c/busses/i2c-cpm.c drivers/i2c/busses/i2c-mpc.c drivers/net/gianfar.c Also fixed up one line in arch/powerpc/kernel/vio.c to use the correct node pointer. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-22of: Remove duplicate fields from of_platform_driverGrant Likely
.name, .match_table and .owner are duplicated in both of_platform_driver and device_driver. This patch is a removes the extra copies from struct of_platform_driver and converts all users to the device_driver members. This patch is a pretty mechanical change. The usage model doesn't change and if any drivers have been missed, or if anything has been fixed up incorrectly, then it will fail with a compile time error, and the fixup will be trivial. This patch looks big and scary because it touches so many files, but it should be pretty safe. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Sean MacLennan <smaclennan@pikatech.com>
2010-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: DMAENGINE: extend the control command to include an arg async_tx: trim dma_async_tx_descriptor in 'no channel switch' case DMAENGINE: DMA40 fix for allocation of logical channel 0 DMAENGINE: DMA40 support paused channel status dmaengine: mpc512x: Use resource_size DMA ENGINE: Do not reset 'private' of channel ioat: Remove duplicated devm_kzalloc() calls for ioatdma_device ioat3: disable cacheline-unaligned transfers for raid operations ioat2,3: convert to producer/consumer locking ioat: convert to circ_buf DMAENGINE: Support for ST-Ericssons DMA40 block v3 async_tx: use of kzalloc/kfree requires the include of slab.h dmaengine: provide helper for setting txstate DMAENGINE: generic channel status v2 DMAENGINE: generic slave control v2 dma: timb-dma: Update comment and fix compiler warning dma: Add timb-dma DMAENGINE: COH 901 318 fix bytesleft DMAENGINE: COH 901 318 rename confusing vars
2010-05-21Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (92 commits) powerpc: Remove unused 'protect4gb' boot parameter powerpc: Build-in e1000e for pseries & ppc64_defconfig powerpc/pseries: Make request_ras_irqs() available to other pseries code powerpc/numa: Use ibm,architecture-vec-5 to detect form 1 affinity powerpc/numa: Set a smaller value for RECLAIM_DISTANCE to enable zone reclaim powerpc: Use smt_snooze_delay=-1 to always busy loop powerpc: Remove check of ibm,smt-snooze-delay OF property powerpc/kdump: Fix race in kdump shutdown powerpc/kexec: Fix race in kexec shutdown powerpc/kexec: Speedup kexec hash PTE tear down powerpc/pseries: Add hcall to read 4 ptes at a time in real mode powerpc: Use more accurate limit for first segment memory allocations powerpc/kdump: Use chip->shutdown to disable IRQs powerpc/kdump: CPUs assume the context of the oopsing CPU powerpc/crashdump: Do not fail on NULL pointer dereferencing powerpc/eeh: Fix oops when probing in early boot powerpc/pci: Check devices status property when scanning OF tree powerpc/vio: Switch VIO Bus PM to use generic helpers powerpc: Avoid bad relocations in iSeries code powerpc: Use common cpu_die (fixes SMP+SUSPEND build) ...
2010-05-21Merge branch 'dbg-early-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'dbg-early-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: echi-dbgp: Add kernel debugger support for the usb debug port earlyprintk,vga,kdb: Fix \b and \r for earlyprintk=vga with kdb kgdboc: Add ekgdboc for early use of the kernel debugger x86,early dr regs,kgdb: Allow kernel debugger early dr register access x86,kgdb: Implement early hardware breakpoint debugging x86, kgdb, init: Add early and late debug states x86, kgdb: early trap init for early debug
2010-05-21Merge branch 'kdb-merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb * 'kdb-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb: (25 commits) kdb,debug_core: Allow the debug core to receive a panic notification MAINTAINERS: update kgdb, kdb, and debug_core info debug_core,kdb: Allow the debug core to process a recursive debug entry printk,kdb: capture printk() when in kdb shell kgdboc,kdb: Allow kdb to work on a non open console port kgdb: Add the ability to schedule a breakpoint via a tasklet mips,kgdb: kdb low level trap catch and stack trace powerpc,kgdb: Introduce low level trap catching x86,kgdb: Add low level debug hook kgdb: remove post_primary_code references kgdb,docs: Update the kgdb docs to include kdb kgdboc,keyboard: Keyboard driver for kdb with kgdb kgdb: gdb "monitor" -> kdb passthrough sparc,sunzilog: Add console polling support for sunzilog serial driver sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console code kgdb,8250,pl011: Return immediately from console poll kgdb: core changes to support kdb kdb: core for kgdb back end (2 of 2) kdb: core for kgdb back end (1 of 2) kgdb,blackfin: Add in kgdb_arch_set_pc for blackfin ...
2010-05-21serial: bfin_sport_uart: Use resource size to fix off-by-one errorTobias Klauser
Use the resource_size function instead of manually calculating the resource size. This actually fixes an off-by-one error. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: Add driver for the Altera UARTTobias Klauser
Add an UART driver for the UART component available as a SOPC (System on Programmable Chip) component for Altera FPGAs. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: Add driver for the Altera JTAG UARTTobias Klauser
Add an UART driver for the JTAG UART component available as a SOPC (System on Programmable Chip) component for Altera FPGAs. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: timbuart: make sure last byte is sent when port is closedRichard Röjfors
Fix a problem in early versions of the FPGA IP. In certain situations the IP reports that the FIFO is empty, but a byte is still clocked out. If a flush is done at that point the currently clocked byte is canceled. This causes incompatibilities with the upper layers when a port is closed, it waits until the FIFO is empty and then closes the port. During close the FIFO is flushed -> the last byte is not sent properly. Now the FIFO is only flushed if it is reported to be non-empty. Which makes the currently clocked out byte to finish. [akpm@linux-foundation.org: fix build] Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: two branches the same in timbuart_set_mctrl()Roel Kluin
CTS is a read only bit and we are to stop signal RTS if modem line TIOCM_RTS is not set. Thanks for suggestions by Richard Röjfors. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Richard Röjfors <richard.rojfors@pelagicore.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: uartlite: move from byte accesses to word accessesJohn Linn
Byte accesses for I/O devices in Xilinx IP is going to be less desired in the future such that the driver is being changed to use 32 bit accesses. This change facilitates using the uartlite IP over a PCIe bus which only allows 32 bit accesses. Signed-off-by: John Linn <john.linn@xilinx.com> Tested-by: Michal Simek <monstr@monstr.eu> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: drop redundant cpu dependsMike Frysinger
The BF54xM procs imply the related BF54x define, so no need to check both. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: drop the experimental markingsMike Frysinger
Should be stable now ... Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: pull in bfin_sport.h for SPORT definesMike Frysinger
Now that the SPORT MMR defines have been unified, switch over to it. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: only enable SPORT TX if data is to be sentSonic Zhang
Rather than always turn on the SPORT TX interrupt, only do it when we've actually queued up data for transmission. This avoids useless interrupt processing. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: drop useless status masksMike Frysinger
These were all copied over from the Blackfin UART driver, but they don't make sense here because these bits are all specific to the Blackfin UART. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: zero sport_uart_port if allocated dynamicallySonic Zhang
Need to initialize the SPORT state rather than using random memory. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: protect changes to uart_portSonic Zhang
Common serial API says we need to grab the port lock before modifying the port state to prevent inconsistent state between threads. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: add support for CTS/RTS via GPIOsSonic Zhang
Some people need flow control on their ports, so now boards can support that via any GPIOs. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: rename early platform driver class stringSonic Zhang
Clarifies command line set up for devices between consoles and early devices. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: add missing mapbase initializationSonic Zhang
The driver doesn't care about this, but the common serial core wants it. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: remove unused peripheral pin listsSonic Zhang
All the resources are in the boards files now. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: shorten the SPORT TX waiting loopSonic Zhang
The waiting loop to stop SPORT TX from TX interrupt is too long. This may block the SPORT RX interrupts and cause the RX FIFO to overflow. So, do stop sport TX only after the last char in TX FIFO is moved into the shift register. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21serial: bfin_sport_uart: work around anomaly 05000473 (make 32bit fifo read ↵Sonic Zhang
atomic) We cannot let a 32-bit RX FIFO read be interrupted otherwise a fake RX underflow error might be generated. URL: http://blackfin.uclinux.org/gf/tracker/5145 Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-20kgdboc: Add ekgdboc for early use of the kernel debuggerJason Wessel
The ekgdboc= differs from kgdboc= in that you can begin debuggin as soon as the exceptions are setup and the kgdb I/O driver is available, instead of waiting until the tty subsystem is available. CC: kgdb-bugreport@lists.sourceforge.net Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20kgdboc,kdb: Allow kdb to work on a non open console portJason Wessel
If kdb is open on a serial port that is not actually a console make sure to call the poll routines to emit and receive characters. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Martin Hicks <mort@sgi.com>
2010-05-20kgdboc,keyboard: Keyboard driver for kdb with kgdbJason Wessel
This patch adds in the kdb PS/2 keyboard driver. This was mostly a direct port from the original kdb where I cleaned up the code against checkpatch.pl and added the glue to stitch it into kgdb. This patch also enables early kdb debug via kgdbwait and the keyboard. All the access to configure kdb using either a serial console or the keyboard is done via kgdboc. If you want to use only the keyboard and want to break in early you would add to your kernel command arguments: kgdboc=kbd kgdbwait If you wanted serial and or the keyboard access you could use: kgdboc=kbd,ttyS0 You can also configure kgdboc as a kernel module or at run time with the sysfs where you can activate and deactivate kgdb. Turn it on: echo kbd,ttyS0 > /sys/module/kgdboc/parameters/kgdboc Turn it off: echo "" > /sys/module/kgdboc/parameters/kgdboc Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2010-05-20sparc,sunzilog: Add console polling support for sunzilog serial driverJason Wessel
Allow kgdboc to work on sparc hardware with the Zilog serial chips. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: David S. Miller <davem@davemloft.net>
2010-05-20sh,sh-sci: Use NO_POLL_CHAR in the SCIF polled console codeJason Wessel
The sci_poll_get_char() needs to return immediately if there is no input from the chip to process, and must return a value of NO_POLL_CHAR. This allows kgdboc to process multiple polled devices while kgdb is active. Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Paul Mundt <lethal@linux-sh.org>
2010-05-20kgdb,8250,pl011: Return immediately from console pollJason Wessel
The design of the kdb shell requires that every device that can provide input to kdb have a polling routine that exits immediately if there is no character available. This is required in order to get the page scrolling mechanism working. Changing the kernel debugger I/O API to require all polling character routines to exit immediately if there is no data allows the kernel debugger to process multiple input channels. NO_POLL_CHAR will be the return code to the polling routine when ever there is no character available. CC: linux-serial@vger.kernel.org Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2010-05-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (29 commits) pcmcia: disable PCMCIA ioctl also for ARM drivers/staging/comedi: dev_node removal (quatech_daqp_cs) drivers/staging/comedi: dev_node removal (ni_mio_cs) drivers/staging/comedi: dev_node removal (ni_labpc_cs) drivers/staging/comedi: dev_node removal (ni_daq_dio24) drivers/staging/comedi: dev_node removal (ni_daq_700) drivers/staging/comedi: dev_node removal (das08_cs) drivers/staging/comedi: dev_node removal (cb_das16_cs) pata_pcmcia: get rid of extra indirection pcmcia: remove suspend-related comment from yenta_socket.c pcmcia: call pcmcia_{read,write}_cis_mem with ops_mutex held pcmcia: remove pcmcia_add_device_lock pcmcia: update gfp/slab.h includes pcmcia: remove unused mem_op.h pcmcia: do not autoadd root PCI bus resources pcmcia: clarify alloc_io_space, move it to resource handlers pcmcia: move all pcmcia_resource_ops providers into one module pcmcia: move high level CIS access code to separate file pcmcia: dev_node removal (core) pcmcia: dev_node removal (remaining drivers) ...
2010-05-19Merge branch 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linuxLinus Torvalds
* 'for-linus/samsung4' of git://git.fluff.org/bjdooks/linux: (98 commits) Input: s3c24xx_ts - depend on SAMSUNG_DEV_TS and update menu entry Input: s3c24xx_ts - Add FEAT for Samsung touchscreen support Input: s3c24xx_ts - Implement generic GPIO configuration callback ARM: SAMSUNG: Move s3c64xx dev-ts.c to plat-samsung and rename configuration ARM: SAMSUNG: Implements cfg_gpio function for Samsung touchscreen ARM: S3C64XX: Add touchscreen platform device definition ARM: SAMSUNG: Move mach/ts.h to plat/ts.h ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: gpio.h cleanup ARM: S5PC100: Move gpio support from plat-s5pc1xx to mach-s5pc100 ARM: S5PC100: Use common functions for gpiolib implementation drivers: serial: S5PC100 serial driver cleanup ARM: S5PC100: Pre-requisite clock patch for plat-s5pc1xx to plat-s5p move ARM: SAMSUNG: Copy common I2C0 device helpers to machine directories ARM: SAMSUNG: move driver strength gpio configuration helper to common dir ARM: S5PV210: Add GPIOlib support ARM: SAMSUNGy: fix broken timer irq base ARM: SMDK6440: Add audio devices on board ARM: S5P6440: Add audio platform devices ...
2010-05-19Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (224 commits) ARM: remove 'select GENERIC_TIME' ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO ARM: 6074/1: oprofile: convert from sysdev to platform device ARM: 6073/1: oprofile: remove old files and update KConfig ARM: 6072/1: oprofile: use perf-events framework as backend ARM: 6071/1: perf-events: allow modules to query the number of hardware counters ARM: 6070/1: perf-events: add support for xscale PMUs ARM: 6069/1: perf-events: use numeric ID to identify PMU ARM: 6064/1: pmu: register IRQs at runtime ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMA ARM: 6134/1: Handle instruction cache maintenance fault properly ARM: nwfpe: allow debugging output to be configured at runtime ARM: rename mach_cpu_disable() to platform_cpu_disable() ARM: 6132/1: PL330: Add common core driver ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310 ARM: Move memory mapping into mmu.c ARM: Ensure meminfo is sorted prior to sanity_check_meminfo ARM: Remove useless linux/bootmem.h includes ARM: convert /proc/cpu/aligment to seq_file arm: use asm-generic/scatterlist.h ...
2010-05-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (127 commits) sh: update defconfigs. sh: Fix up the NUMA build for recent LMB changes. sh64: provide a stub per_cpu_trap_init() definition. sh: fix up CONFIG_KEXEC=n build. sh: fixup the docbook paths for clock framework shuffling. driver core: Early dev_name() depends on slab_is_available(). sh: simplify WARN usage in SH clock driver sh: Check return value of clk_get on ms7724 sh: Check return value of clk_get on ecovec24 sh: move sh clock-cpg.c contents to drivers/sh/clk-cpg.c sh: move sh clock.c contents to drivers/sh/clk. sh: move sh asm/clock.h contents to linux/sh_clk.h V2 sh: remove unused clock lookup sh: switch boards to clkdev sh: switch sh4-202 to clkdev sh: switch shx3 to clkdev sh: switch sh7757 to clkdev sh: switch sh7763 to clkdev sh: switch sh7780 to clkdev sh: switch sh7786 to clkdev ...
2010-05-19drivers: serial: S5PC100 serial driver cleanupMarek Szyprowski
Remove unnecessary Kconfig entry. S5PC100 has exactly the same driver as S3C6400/S3C6410/S5P6440. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-05-18of: Always use 'struct device.of_node' to get device node pointer.Grant Likely
The following structure elements duplicate the information in 'struct device.of_node' and so are being eliminated. This patch makes all readers of these elements use device.of_node instead. (struct of_device *)->node (struct dev_archdata *)->prom_node (sparc) (struct dev_archdata *)->of_node (powerpc & microblaze) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2010-05-17Merge branch 'ioat' into dmaengineDan Williams
2010-05-17DMAENGINE: extend the control command to include an argLinus Walleij
This adds an argument to the DMAengine control function, so that we can later provide control commands that need some external data passed in through an argument akin to the ioctl() operation prototype. [dan.j.williams@intel.com: fix up some missed conversions] Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-05-17Merge branch 'devel-stable' into develRussell King
Conflicts: arch/arm/Kconfig arch/arm/include/asm/system.h arch/arm/mm/Kconfig
2010-05-13serial: imx.c: fix CTS trigger level lower to avoid lost charsValentin Longchamp
The imx CTS trigger level is left at its reset value that is 32 chars. Since the RX FIFO has 32 entries, when CTS is raised, the FIFO already is full. However, some serial port devices first empty their TX FIFO before stopping when CTS is raised, resulting in lost chars. This patch sets the trigger level lower so that other chars arrive after CTS is raised, there is still room for 16 of them. Signed-off-by: Valentin Longchamp<valentin.longchamp@epfl.ch> Tested-by: Philippe Rétornaz<philippe.retornaz@epfl.ch> Acked-by: Wolfram Sang<w.sang@pengutronix.de> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-13serial: mpc52xx_uart: fix null pointer dereferenceAnatolij Gustschin
Commit 6acc6833510db8f72b5ef343296d97480555fda9 introduced NULL pointer dereference and kernel crash on ppc32 machines while booting. Fix this bug now. Reported-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Tested-by: Leonardo Chiquitto <leonardo.lists@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-10pcmcia: dev_node removal (write-only drivers)Dominik Brodowski
dev_node_t was only used to transport some minor/major numbers from the PCMCIA device drivers to deprecated userspace helpers. However, only a few drivers made use of it, and the userspace helpers are deprecated anyways. Therefore, get rid of dev_node_t . As a first step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, but did not make use of it. CC: linux-bluetooth@vger.kernel.org CC: Harald Welte <laforge@gnumonks.org> CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>