summaryrefslogtreecommitdiffstats
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2005-07-02[SCSI] lpfc: Fix ADISC completion incorrectly putting initiators on mapped listJames.Smart@Emulex.Com
Symptom - An unmapped node (initiator) that goes away in a situation such as cable pull, comes back as a mapped node. Fix - On ADISC completion, put a list on the mapped list only if it is a FCP_TARGET. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add completion handler to the abort iocbsJames.Smart@Emulex.Com
Add completion handler to the abort iocbs to close a hole where we could reuse an iotag. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix LS_RJT never sent by lpfc_els_unsol_event()James.Smart@Emulex.Com
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be sent. However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in cases where an LS_RJT should be sent, so rjt_err was never true. Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should be sent. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add LP6000 PCI IDJames.Smart@Emulex.Com
Fix driver not seeing LP6000. Fix: add PCI id to the pci_device_id table and a short description for the HBA in get_hba_model_desc(). Also add a default clause to the switch statement that parses the various PCI ID's. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Set max_sectors in host templateJames.Smart@Emulex.Com
Add max_sectors to the driver host template and initialize it with 0xFFFF since the driver has no limitations on the size a transfer contained by a scsi command and that fits within the sg_tablesize provisioned by the driver. This fixes a performance issue seen in some configurations. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix error loading on sparcJames.Smart@Emulex.Com
Bug reported via SourceForge - lpfc does not load on sparc. The lpfc driver must byteswap all FCP IOCBs to recover the data into cpu native format. Also correct issue of "iotag not found" messages Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fixes in mbox_timeout_handlerJames.Smart@Emulex.Com
Analysis: Timeout of READ_SPARM64 causes call to lpfc_mbox_timeout_handler which reads psli->mbox_active to determine the timeout mbox. Timeout handler then NULL's psli->mbox_active and calls lpfc_mbx_cmpl_read_sparam(), which on timeout condition, calls link_down(). link_down() now calls disc_done() which calls mbox_timeout_hander() again since WORKER_MBOX_TMO is still set, which goes back to read psli->mbox_active which is already NULL'ed. Remove redundant if statement in lpfc_mbox_timeout_handler. pmbox is assigned psli->mbox_active so there is no need to check if it actually equals psli->mbox_active. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] Fix issue where all hosts log nodev message for other initiatorsJames.Smart@Emulex.Com
Fix issue where all hosts connected to SAN get spammed with nodev message when other initiators go away. Display nodev message only when FC targets go away. However this behavior will be overridden if LOG_DISCOVERY is set. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: hgp/pgp cleanupsJames.Smart@Emulex.Com
From: Christoph Hellwig <hch@lst.de>: - rename PGP/HPH to lpfc_pgp/lpfc_hgp - use __le32 types for the members to start fixing sparse -Wbitwise issues - remove lpfc_sli.MBhostaddr, we can always use the pointer from SLI2_DESC directly Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aic7xxx: correct target valid check in aic7xxx_proc.cJames Bottomley
From: Andy Whitcroft <apw@shadowen.org> Updated to remove the bogus translated target check. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] use list_for_each_entry_safe in scsi_error.cChristoph Hellwig
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_eh_eflags_ macrosChristoph Hellwig
Just opencoded access to eh_eflags, it's much more readable anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->stateChristoph Hellwig
We never look at it except for the old megaraid driver that abuses it for sending internal commands. That usage can be fixed easily because those internal commands are single-threaded by a mutex and we can easily use a completion there. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->ownerChristoph Hellwig
never checked anywhere Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd->abort_reasonChristoph Hellwig
Never used for anything but printing it out in debug routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_cmnd.eh_stateChristoph Hellwig
it's never set to anything, and just three broken drivers are looking at it and doing odd things. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] megaraid: fix compilation after eh locking changesJames Bottomley
From: Christoph Hellwig <hch@lst.de> Patch fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aacraid: New products patchMark Haverkamp
This patch add the following products to the driver: IBM ServeRAID 8i ICP 9014R0 ICP 9024R0 ICP 9047MA ICP 9087MA ICP 9085LI ICP 5085AU Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] remove scsi_set_deviceChristoph Hellwig
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] scsi/qla1280: replace schedule_timeout() with ssleep()Nishanth Aravamudan
Use ssleep() instead of schedule_timeout to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-25[PATCH] drivers/scsi/dpt*: remove version.h dependenciesAdrian Bunk
This patch removes version.h dependencies. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-25[PATCH] drivers/scsi/initio.c: cleanupsAdrian Bunk
This patch contains the following cleanups: - make needlessly global code static - remove or #if 0 the following unused functions: - tul_pop_pend_scb - tul_device_reset - tul_reset_scsi_bus Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] make various thing staticAdrian Bunk
Another rollup of patches which give various symbols static scope Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23[PATCH] dpt_i2o: fix waitqueue abuseAndrew Morton
The driver plays with waitqueue internals and fails to compile after Ben's "aio: make wait_queue ->task ->private" patch. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] megaraid build fixbobl
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-20Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
2005-06-20[PATCH] Driver Core: drivers/s390/net/qeth_sys.c - ↵Yani Ioannou
drivers/usb/gadget/pxa2xx_udc.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] use device_for_each_child() to properly access child devices.gregkh@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Use device_for_each_child() to unregister devices in ↵mochel@digitalimplant.org
scsi_remove_target(). Signed-off-by: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Index: gregkh-2.6/drivers/scsi/scsi_sysfs.c ===================================================================
2005-06-20[PATCH] class: convert drivers/scsi/* to use the new class api instead of ↵gregkh@suse.de
class_simple Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-19aic7xxx/aic79xx_osm: revert completely bogus ahd_linux_queue() patchJeff Garzik
2005-06-18Merge 'upstream-2.6.13' branch of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-06-18Merge /spare/repo/linux-2.6/Jeff Garzik
2005-06-17[SCSI] aacraid: regression fixMark Haverkamp
The fixes for sparse warnings mixed in with the fixups for the raw_srb handler resulted in a bug that showed up in the 32 bit environments when trying to issue calls directly to the physical devices that are part of the arrays (ioctl scsi passthrough). Received from Mark Salyzyn at adaptec. Applied comment from Christoph to remove cpu_to_le32(0) Applied Mark S fix of missing memcpy. It applies to the scsi-misc-2.6 git tree. Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17merge by hand (qla_os.c mismerge)James Bottomley
2005-06-17merge by hand (fix up qla_os.c merge error)James Bottomley
2005-06-17[SCSI] allow sleeping in ->eh_host_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_bus_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] Remove no-op implementations of SCSI EH hooksJeff Garzik
Drivers need not implement a hook that returns FAILED, and does nothing else, since the SCSI midlayer code will do that for us. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] Remove unnecessary locking around completion function callsJeff Garzik
The SCSI ->done() hook should not be called from inside a spinlock. Drivers that do this are mostly cut-n-paste from 2.2.x-era. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-13[SCSI] aic7xxx: fix the BIOS limits setting routinesJames Bottomley
Following the go around over the SONY DVD that needs artificial limits, this should be the correct code for all cases (minus the debugging prints). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-12[PATCH] M68k: Mark Sun-3 NCR5380 SCSI brokenGeert Uytterhoeven
M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH SCSI constants were removed in 2.6.12-rc3). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-11[SCSI] aic7xxx: clean up eisa supportChristoph Hellwig
- the eisa layer only probes when it's actually safe, no need for a driver option - store the id table directly in linux format instead of convering at runtime Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: remove some dead woodChristoph Hellwig
especially the now dead scsi_cmnd overlay Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: remove ahc_find_softcChristoph Hellwig
there's absolutely no reason not to trust the driver private data Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: do not check for duplicate pci idsChristoph Hellwig
pci layer handles this just fine for us Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx/aic79xx: remove useless byte order macro cruftChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] qla2xxx: Pull-down scsi-host-addition to follow board initialization.Andrew Vasquez
Return to previous held-logic of calling scsi_add_host() only after the board has been completely initialized. Also return pci_*() error-codes during probe failure paths. This also corrects an issue where only lun 0 is being scanned for a given port. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-03 12:11:29 +0000