| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Major changes include:
- Full support of the firmware Page Deallocation Table with
MADV_HWPOISON and MADV_SOFT_OFFLINE. A kernel thread scans
regularily for new bad memory pages.
- Full support for self-extracting kernel.
- Added UBSAN support.
- Lots of section mismatch fixes across all parisc drivers.
- Added examples for %pF and %pS usage in printk-formats.txt"
* 'parisc-4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: (28 commits)
printk-formats.txt: Add examples for %pF and %pS usage
parisc: Fix up devices below a PCI-PCI MegaRAID controller bridge
parisc/core: Fix section mismatches
parisc/ipmi_si_intf: Fix section mismatches on parisc platform
parisc/input/hilkbd: Fix section mismatches
parisc/net/lasi_82596: Fix section mismatches
parisc/serio: Fix section mismatches in gscps2 and hp_sdc drivers
parisc: Fix section mismatches in parisc core drivers
parisc/parport_gsc: Fix section mismatches
parisc/scsi/lasi700: Fix section mismatches
parisc/scsi/zalon: Fix section mismatches
parisc/8250_gsc: Fix section mismatches
parisc/mux: Fix section mismatches
parisc/sticore: Fix section mismatches
parisc/harmony: Fix section mismatches
parisc: Wire up support for self-extracting kernel
parisc: Make existing core files reuseable for bootloader
parisc: Add core code for self-extracting kernel
parisc: Enable UBSAN support
parisc/random: Add machine specific randomness
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes: a NULL deref in qedf, an off by one in sg and a fix
to IPR to prevent an error on initialisation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedf: Fix a potential NULL pointer dereference
scsi: sg: off by one in sg_ioctl()
scsi: ipr: Set no_report_opcodes for RAID arrays
|
|
At the beginning of 'qedf_srr_compl()' and of 'qedf_rec_compl()', we
check if 'orig_io_req' is NULL. If this happens, a NULL pointer
dereference will occur in the error handling path.
Fix it by adding an additional label in the error handling path in order
to avoid this NULL pointer dereference.
[mkp: typo]
Fixes: 61d8658b4a43 ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six minor and error leg fixes, plus one major change: the reversion of
scsi-mq as the default.
We're doing the latter temporarily (with a backport to stable) to give
us time to fix all the issues that turned up with this default before
trying again"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: cxgb4i: call neigh_event_send() to update MAC address
Revert "scsi: default to scsi-mq"
scsi: sd_zbc: Write unlock zone from sd_uninit_cmnd()
scsi: aacraid: Fix out of bounds in aac_get_name_resp
scsi: csiostor: fail probe if fw does not support FCoE
scsi: megaraid_sas: fix error handle in megasas_probe_one
|
|
If "val" is SG_MAX_QUEUE then we are one element beyond the end of the
"rinfo" array so the > should be >=.
Fixes: 109bade9c625 ("scsi: sg: use standard lists for sg_requests")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Since ipr RAID arrays do not support the MAINTENANCE_IN /
MI_REPORT_SUPPORTED_OPERATION_CODES, set no_report_opcodes to prevent it
from being sent.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A couple of minor fixes (st, ses) and some bigger driver fixes for
qla2xxx (crash triggered by fw dump) and ipr (lockdep problems with
mq)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ses: Fix wrong page error
scsi: ipr: Fix scsi-mq lockdep issue
scsi: st: fix blk_get_queue usage
scsi: qla2xxx: Fix system crash while triggering FW dump
|
|
If nud_state is not valid then call neigh_event_send() to update MAC
address.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Defaulting to scsi-mq in 4.13-rc has shown various regressions
on setups that we didn't previously consider. Fixes for them are
in progress, but too invasive to make it in this cycle. So for
now revert the commit that defaults to blk-mq for SCSI. For 4.14
we'll plan to try again with these fixes.
This reverts commit 5c279bd9e40624f4ab6e688671026d6005b066fa.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Releasing a zone write lock only when the write commnand that acquired
the lock completes can cause deadlocks due to potential command
reordering if the lock owning request is requeued and not executed. This
problem exists only with the scsi-mq path as, unlike the legacy path,
requests are moved out of the dispatch queue before being prepared and
so before locking a zone for a write command.
Since sd_uninit_cmnd() is now always called when a request is requeued,
call sd_zbc_write_unlock_zone() from that function for write requests
that acquired a zone lock instead of from sd_done(). Acquisition of a zone
lock by a write command is indicated using the new command
flag SCMD_ZONE_WRITE_LOCK.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
We terminate the aac_get_name_resp on a byte that is outside the bounds
of the structure. Extend the return response by one byte to remove the
out of bounds reference.
Fixes: b836439faf04 ("aacraid: 4KB sector support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Carroll <david.carroll@microsemi.com>
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fail probe if FCoE capability is not enabled in the firmware.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
megasas_mgmt_info.max_index has increased by 1 before megasas_io_attach,
if megasas_io_attach return error, then goto fail_io_attach,
megasas_mgmt_info.instance has a wrong index here. So first reduce
max_index and then set that instance to NULL.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"The highlights include:
- Fix iscsi-target payload memory leak during
ISCSI_FLAG_TEXT_CONTINUE (Varun Prakash)
- Fix tcm_qla2xxx incorrect use of tcm_qla2xxx_free_cmd during ABORT
(Pascal de Bruijn + Himanshu Madhani + nab)
- Fix iscsi-target long-standing issue with parallel delete of a
single network portal across multiple target instances (Gary Guo +
nab)
- Fix target dynamic se_node GPF during uncached shutdown regression
(Justin Maggard + nab)"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix node_acl demo-mode + uncached dynamic shutdown regression
iscsi-target: Fix iscsi_np reset hung task during parallel delete
qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT (v2)
cxgbit: fix sg_nents calculation
iscsi-target: fix invalid flags in text response
iscsi-target: fix memory leak in iscsit_setup_text_cmd()
cxgbit: add missing __kfree_skb()
tcmu: free old string on reconfig
tcmu: Fix possible to/from address overflow when doing the memcpy
|
|
Pull NVMe fixes from Christoph:
"A few more small fixes - the fc/lpfc update is the biggest by far."
|
|
Currently, calls to nvmet_fc_rcv_fcp_req() always copied the
FC-NVME cmd iu to a temporary buffer before returning, allowing
the driver to immediately repost the buffer to the hardware.
To address timing conditions on queue element structures vs async
command reception, the nvmet_fc transport occasionally may need to
hold on to the command iu buffer for a short period. In these cases,
the nvmet_fc_rcv_fcp_req() will return a special return code
(-EOVERFLOW). In these cases, the LLDD must delay until the new
defer_rcv lldd callback is called before recycling the buffer back
to the hw.
This patch adds support for the new nvmet_fc transport defer_rcv
callback and recognition of the new error code when passing commands
to the transport.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small fixes, one re-fix of a previous fix and five patches sorting
out hotplug in the bnx2X class of drivers. The latter is rather
involved, but necessary because these drivers have started dropping
lockdep recursion warnings on the hotplug lock because of its
conversion to a percpu rwsem"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: only check for dxfer_len greater than 256M
scsi: aacraid: reading out of bounds
scsi: qedf: Limit number of CQs
scsi: bnx2i: Simplify cpu hotplug code
scsi: bnx2fc: Simplify CPU hotplug code
scsi: bnx2i: Prevent recursive cpuhotplug locking
scsi: bnx2fc: Prevent recursive cpuhotplug locking
scsi: bnx2fc: Plug CPU hotplug race
|
|
If a SES device returns an error on a requested diagnostic page, we are
currently printing an error indicating the wrong page was received. Fix
this up to simply return a failure and only check the returned page when
the diagnostic page buffer was populated by the device.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fixes the following lockdep warning that can occur when scsi-mq is
enabled with ipr due to ipr calling scsi_unblock_requests from irq
context. The fix is to move the call to scsi_unblock_requests to ipr's
existing workqueue.
stack backtrace:
CPU: 28 PID: 0 Comm: swapper/28 Not tainted 4.13.0-rc2-gcc6x-gf74c89b #1
Call Trace:
[c000001fffe97550] [c000000000b50818] dump_stack+0xe8/0x160 (unreliable)
[c000001fffe97590] [c0000000001586d0] print_usage_bug+0x2d0/0x390
[c000001fffe97640] [c000000000158f34] mark_lock+0x7a4/0x8e0
[c000001fffe976f0] [c00000000015a000] __lock_acquire+0x6a0/0x1a70
[c000001fffe97860] [c00000000015befc] lock_acquire+0xec/0x2e0
[c000001fffe97930] [c000000000b71514] _raw_spin_lock+0x44/0x70
[c000001fffe97960] [c0000000005b60f4] blk_mq_sched_dispatch_requests+0xa4/0x2a0
[c000001fffe979c0] [c0000000005acac0] __blk_mq_run_hw_queue+0x100/0x2c0
[c000001fffe97a00] [c0000000005ad478] __blk_mq_delay_run_hw_queue+0x118/0x130
[c000001fffe97a40] [c0000000005ad61c] blk_mq_start_hw_queues+0x6c/0xa0
[c000001fffe97a80] [c000000000797aac] scsi_kick_queue+0x2c/0x60
[c000001fffe97aa0] [c000000000797cf0] scsi_run_queue+0x210/0x360
[c000001fffe97b10] [c00000000079b888] scsi_run_host_queues+0x48/0x80
[c000001fffe97b40] [c0000000007b6090] ipr_ioa_bringdown_done+0x70/0x1e0
[c000001fffe97bc0] [c0000000007bc860] ipr_reset_ioa_job+0x80/0xf0
[c000001fffe97bf0] [c0000000007b4d50] ipr_reset_timer_done+0xd0/0x100
[c000001fffe97c30] [c0000000001937bc] call_timer_fn+0xdc/0x4b0
[c000001fffe97cf0] [c000000000193d08] expire_timers+0x178/0x330
[c000001fffe97d60] [c0000000001940c8] run_timer_softirq+0xb8/0x120
[c000001fffe97de0] [c000000000b726a8] __do_softirq+0x168/0x6d8
[c000001fffe97ef0] [c0000000000df2c8] irq_exit+0x108/0x150
[c000001fffe97f10] [c000000000017bf4] __do_irq+0x2a4/0x4a0
[c000001fffe97f90] [c00000000002da50] call_do_irq+0x14/0x24
[c0000007fad93aa0] [c000000000017e8c] do_IRQ+0x9c/0x140
[c0000007fad93af0] [c000000000008b98] hardware_interrupt_common+0x138/0x140
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If blk_queue_get() in st_probe fails, disk->queue must not be set to
SDp->request_queue, as that would result in put_disk() dropping a not
taken reference.
Thus, disk->queue should be set only after a successful blk_queue_get().
Fixes: 2b5bebccd282 ("st: Take additional queue ref in st_probe")
Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com>
Acked-by: Shirish Pargaonkar <spargaonkar@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch fixes system hang/crash while firmware dump is attempted with
Block MQ enabled in qla2xxx driver. Fix is to remove check in fw dump
template entries for existing request and response queues so that full
buffer size is calculated during template size calculation.
Following stack trace is seen during firmware dump capture process
[ 694.390588] qla2xxx [0000:81:00.0]-5003:11: ISP System Error - mbx1=4b1fh mbx2=10h mbx3=2ah mbx7=0h.
[ 694.402336] BUG: unable to handle kernel paging request at ffffc90008c7b000
[ 694.402372] IP: memcpy_erms+0x6/0x10
[ 694.402386] PGD 105f01a067
[ 694.402386] PUD 85f89c067
[ 694.402398] PMD 10490cb067
[ 694.402409] PTE 0
[ 694.402421]
[ 694.402437] Oops: 0002 [#1] PREEMPT SMP
[ 694.402452] Modules linked in: netconsole configfs qla2xxx scsi_transport_fc
nvme_fc nvme_fabrics bnep bluetooth rfkill xt_tcpudp unix_diag xt_multiport
ip6table_filter ip6_tables iptable_filter ip_tables x_tables af_packet
iscsi_ibft iscsi_boot_sysfs xfs libcrc32c ipmi_ssif sb_edac edac_core
x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass igb
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel iTCO_wdt
aes_x86_64 crypto_simd ptp iTCO_vendor_support glue_helper cryptd lpc_ich joydev
i2c_i801 pcspkr ioatdma mei_me pps_core tpm_tis mei mfd_core acpi_power_meter
tpm_tis_core ipmi_si ipmi_devintf tpm ipmi_msghandler shpchp wmi dca button
acpi_pad btrfs xor uas usb_storage hid_generic usbhid raid6_pq crc32c_intel ast
i2c_algo_bit drm_kms_helper syscopyarea sysfillrect
[ 694.402692] sysimgblt fb_sys_fops xhci_pci ttm ehci_pci sr_mod xhci_hcd
cdrom ehci_hcd drm usbcore sg
[ 694.402730] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.0-1-default+ #19
[ 694.402753] Hardware name: Supermicro X10DRi/X10DRi, BIOS 1.1a 10/16/2015
[ 694.402776] task: ffffffff81c0e4c0 task.stack: ffffffff81c00000
[ 694.402798] RIP: 0010:memcpy_erms+0x6/0x10
[ 694.402813] RSP: 0018:ffff88085fc03cd0 EFLAGS: 00210006
[ 694.402832] RAX: ffffc90008c7ae0c RBX: 0000000000000004 RCX: 000000000001fe0c
[ 694.402856] RDX: 0000000000020000 RSI: ffff8810332c01f4 RDI: ffffc90008c7b000
[ 694.402879] RBP: ffff88085fc03d18 R08: 0000000000020000 R09: 0000000000279e0a
[ 694.402903] R10: 0000000000000000 R11: f000000000000000 R12: ffff88085fc03d80
[ 694.402927] R13: ffffc90008a01000 R14: ffffc90008a056d4 R15: ffff881052ef17e0
[ 694.402951] FS: 0000000000000000(0000) GS:ffff88085fc00000(0000) knlGS:0000000000000000
[ 694.402977] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 694.403012] CR2: ffffc90008c7b000 CR3: 0000000001c09000 CR4: 00000000001406f0
[ 694.403036] Call Trace:
[ 694.403047] <IRQ>
[ 694.403072] ? qla27xx_fwdt_entry_t263+0x18e/0x380 [qla2xxx]
[ 694.403099] qla27xx_walk_template+0x9d/0x1a0 [qla2xxx]
[ 694.403124] qla27xx_fwdump+0x1f3/0x272 [qla2xxx]
[ 694.403149] qla2x00_async_event+0xb08/0x1a50 [qla2xxx]
[ 694.403169] ? enqueue_task_fair+0xa2/0x9d0
Signed-off-by: Mike Hernandez <michael.hernandez@cavium.com>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"These seven patches are mostly minor build, Kconfig and error leg
fixes"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Fix return code in qedi_ep_connect()
scsi: lpfc: fix linking against modular NVMe support
scsi: scsi_transport_fc: return -EBUSY for deleted vport
scsi: libcxgbi: add check for valid cxgbi_task_data
scsi: aic7xxx: fix firmware build with O=path
scsi: megaraid_sas: fix memleak in megasas_alloc_cmdlist_fusion
scsi: qedi: Add ISCSI_BOOT_SYSFS to Kconfig
|
|
This patch drops two incorrect usages of tcm_qla2xxx_free_cmd()
during TMR ABORT within tcm_qla2xxx_handle_data_work() and
tcm_qla2xxx_aborted_task(), which where attempting to dispatch
into workqueue context to do tcm_qla2xxx_complete_free() and
subsequently invoke transport_generic_free_cmd().
This is incorrect because during TMR ABORT target-core will
drop the outstanding se_cmd->cmd_kref references once it has
quiesced the se_cmd via transport_wait_for_tasks(), and in
the case of qla2xxx it should not attempt to do it's own
transport_generic_free_cmd() once the abort has occured.
As reported by Pascal, this was originally manifesting as a
BUG_ON(cmd->cmd_in_wq) in qlt_free_cmd() during TMR ABORT,
with a LIO backend that had sufficently high enough WRITE
latency to trigger a host side TMR ABORT_TASK.
(v2: Drop the qla_tgt_cmd->write_pending_abort_comp changes,
as they will be addressed in a seperate series)
Reported-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Tested-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Cc: Pascal de Bruijn <p.debruijn@unilogic.nl>
Reported-by: Lukasz Engel <lukasz.engel@softax.pl>
Cc: Lukasz Engel <lukasz.engel@softax.pl>
Acked-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Cc: Quinn Tran <quinn.tran@cavium.com>
Cc: <stable@vger.kernel.org> # 3.10+
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Don't make any assumptions on the sg_io_hdr_t::dxfer_direction or the
sg_io_hdr_t::dxferp in order to determine if it is a valid request. The
only way we can check for bad requests is by checking if the length
exceeds 256M.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 28676d869bbb (scsi: sg: check for valid direction before starting the
request)
Reported-by: Jason L Tibbitts III <tibbs@math.uh.edu>
Tested-by: Jason L Tibbitts III <tibbs@math.uh.edu>
Suggested-by: Doug Gilbert <dgilbert@interlog.com>
Cc: Doug Gilbert <dgilbert@interlog.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
"qd.id" comes directly from the copy_from_user() on the line before so
we should verify that it's within bounds.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
FCOE offloading failed with:
[qed_sp_fcoe_func_start:150(sp-0-3b:00.02)]Cannot satisfy CQ amount. CQs
requested 8, CQs available 6. Aborting function start
[qed_fcoe_start:821()]Failed to start fcoe
[__qedf_probe:3041]:6: Cannot start FCoE function.
The reason is a newly introduced check in the qed main part. This change
also provides the information about how many CQs are available, so we
simply limit the number of requested CQs..
Fixes: 3c5da9427802 ("qed: Share additional information with qedf")
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The CPU hotplug related code of this driver can be simplified by:
1) Consolidating the callbacks into a single state. The CPU thread can be
torn down on the CPU which goes offline. There is no point in delaying
that to the CPU dead state
2) Let the core code invoke the online/offline callbacks and remove the
extra for_each_online_cpu() loops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The CPU hotplug related code of this driver can be simplified by:
1) Consolidating the callbacks into a single state. The CPU thread can be
torn down on the CPU which goes offline. There is no point in delaying
that to the CPU dead state
2) Let the core code invoke the online/offline callbacks and remove the
extra for_each_online_cpu() loops.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The BNX2I module init/exit code installs/removes the hotplug callbacks with
the cpu hotplug lock held. This worked with the old CPU locking
implementation which allowed recursive locking, but with the new percpu
rwsem based mechanism this is not longer allowed.
Use the _cpuslocked() variants to fix this.
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The BNX2FC module init/exit code installs/removes the hotplug callbacks with
the cpu hotplug lock held. This worked with the old CPU locking
implementation which allowed recursive locking, but with the new percpu
rwsem based mechanism this is not longer allowed.
Use the _cpuslocked() variants to fix this.
Reported-by: kernel test robot <fengguang.wu@intel.com>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
bnx2fc_process_new_cqes() has protection against CPU hotplug, which relies
on the per cpu thread pointer. This protection is racy because it happens
only partially with the per cpu fp_work_lock held.
If the CPU is unplugged after the lock is dropped, the wakeup code can
dereference a NULL pointer or access freed and potentially reused memory.
Restructure the code so the thread check and wakeup happens with the
fp_work_lock held.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small fixes.
The transfer size fixes are actually correcting some performance drops
on the hpsa and smartpqi cards. The cards actually have an internal
cache for request speed up but bypass it for transfers > 1MB. Since
4.3 the efficiency of our merges has rendered the cache mostly unused,
so limit transfers to under 1MB to recover the cache boost"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sg: fix static checker warning in sg_is_valid_dxfer
scsi: smartpqi: limit transfer length to 1MB
scsi: hpsa: limit transfer length to 1MB
|
|
We shouldn't be writing over the "ret" variable. It means we return
ERR_PTR(0) which is NULL and it results in a NULL dereference in the
caller.
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When LPFC is built-in but NVMe is a loadable module, we fail to link the
kernel:
drivers/scsi/built-in.o: In function `lpfc_nvme_create_localport':
(.text+0x156a82): undefined reference to `nvme_fc_register_localport'
drivers/scsi/built-in.o: In function `lpfc_nvme_destroy_localport':
(.text+0x156eaa): undefined reference to `nvme_fc_unregister_remoteport'
We can avoid this either by forcing lpfc to be a module, or by disabling
NVMe support in this case. This implements the former.
Fixes: 7d7080335f8d ("scsi: lpfc: Finalize Kconfig options for nvme")
Cc: stable@vger.kernel.org
Link: https://patchwork.kernel.org/patch/9636569/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When trying to delete a vport via 'vport_delete' sysfs attribute we
should be checking if the port is already in state VPORT_DELETING; if so
there's no need to do anything.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In error case it is possible that ->cleanup_task() gets called without
calling ->alloc_pdu() in this case cxgbi_task_data is not valid, so add
a check for for valid cxgbi_task_data in cxgbi_cleanup_task().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Building firmware with O=path was apparently broken in aic7 for ever.
Message of the previous commit to the Makefile (from 2008) mentions this
unfortunate state of affairs already. Fix this, mostly to make
randconfig builds more reliable.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Found this issue by kmemleak, a few kb mem was leaked in
megasas_alloc_cmdlist_fusion when kzalloc failed for one
megasas_cmd_fusion allocation.
unreferenced object 0xffff88045dbd2000 (size 8192):
comm "systemd-udevd", pid 323, jiffies 4294671759 (age 49.008s)
backtrace:
[<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff812186a8>] __kmalloc+0xe8/0x220
[<ffffffffc0060594>] megasas_alloc_cmdlist_fusion+0x34/0xe0 [megaraid_sas]
(gdb) list *megasas_alloc_cmdlist_fusion+0x34
0xd5c4 is in megasas_alloc_cmdlist_fusion
(drivers/scsi/megaraid/megaraid_sas_fusion.c:443).
[<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas]
[<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas]
[<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas]
[<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas]
[<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas]
[<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0
[<ffffffff813d4222>] pci_device_probe+0x192/0x1b0
[<ffffffff814e3658>] driver_probe_device+0x2a8/0x460
[<ffffffff814e38ed>] __driver_attach+0xdd/0xe0
[<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0
[<ffffffff814e2dde>] driver_attach+0x1e/0x20
[<ffffffff814e2775>] bus_add_driver+0x45/0x270
[<ffffffff814e4400>] driver_register+0x60/0xe0
unreferenced object 0xffff880454ce3600 (size 192):
backtrace:
[<ffffffff8176166a>] kmemleak_alloc+0x4a/0xa0
[<ffffffff8121801a>] kmem_cache_alloc_trace+0xca/0x1d0
[<ffffffffc00605d7>] megasas_alloc_cmdlist_fusion+0x77/0xe0 [megaraid_sas]
(gdb) list *megasas_alloc_cmdlist_fusion+0x77
0xd607 is in megasas_alloc_cmdlist_fusion
(drivers/scsi/megaraid/megaraid_sas_fusion.c:450).
[<ffffffffc0060ca5>] megasas_alloc_cmds_fusion+0x25/0x410 [megaraid_sas]
[<ffffffffc0061edf>] megasas_init_adapter_fusion+0x21f/0x640 [megaraid_sas]
[<ffffffffc005df17>] megasas_init_fw+0x357/0xd30 [megaraid_sas]
[<ffffffffc005ef26>] megasas_probe_one.part.33+0x636/0x1100 [megaraid_sas]
[<ffffffffc005fa36>] megasas_probe_one+0x46/0xc0 [megaraid_sas]
[<ffffffff813d2ca5>] local_pci_probe+0x45/0xa0
[<ffffffff813d4222>] pci_device_probe+0x192/0x1b0
[<ffffffff814e3658>] driver_probe_device+0x2a8/0x460
[<ffffffff814e38ed>] __driver_attach+0xdd/0xe0
[<ffffffff814e124c>] bus_for_each_dev+0x6c/0xc0
[<ffffffff814e2dde>] driver_attach+0x1e/0x20
[<ffffffff814e2775>] bus_add_driver+0x45/0x270
[<ffffffff814e4400>] driver_register+0x60/0xe0
Signed-off-by: Shu Wang <shuwang@redhat.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
qedi uses iscsi_boot_sysfs to export the targets used for boot to
sysfs. Select the config option to make sure the module is built.
This addresses the compile time issue,
drivers/scsi/qedi/qedi_main.o: In function `qedi_remove':
qedi_main.c:(.text+0x3bbd): undefined reference to `iscsi_boot_destroy_kset'
drivers/scsi/qedi/qedi_main.o: In function `__qedi_probe.constprop.0':
qedi_main.c:(.text+0x577a): undefined reference to `iscsi_boot_create_target'
qedi_main.c:(.text+0x5807): undefined reference to `iscsi_boot_create_target'
qedi_main.c:(.text+0x587f): undefined reference to `iscsi_boot_create_initiator'
qedi_main.c:(.text+0x58f3): undefined reference to `iscsi_boot_create_ethernet'
qedi_main.c:(.text+0x5927): undefined reference to `iscsi_boot_destroy_kset'
qedi_main.c:(.text+0x5d7b): undefined reference to `iscsi_boot_create_host_kset'
[mkp: fixed whitespace]
Signed-off-by: Nilesh Javali <nilesh.javali@cavium.com>
Fixes: c57ec8fb7c02 ("scsi: qedi: Add support for Boot from SAN over iSCSI offload")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
dxfer_len is an unsigned int and we always assign a value > 0 to it, so
it doesn't make any sense to check if it is < 0. We can't really check
dxferp as well as we have both NULL and not NULL cases in the possible
call paths.
So just return true for SG_DXFER_FROM_DEV transfer in
sg_is_valid_dxfer().
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Colin Ian King <colin.king@canonical.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The smartpqi firmware will bypass the cache for any request larger than
1MB, so we should cap the request size to avoid any performance
degradation in kernels later than v4.3
This degradation is caused from d2be537c3ba3568acd79cd178327b842e60d035e,
which changed max_sectors_kb to 1280k, but the hardware is able to
work fine with it, so the true fix should be from smartpqi driver.
Signed-off-by: Yadan Fan <ydfan@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The hpsa firmware will bypass the cache for any request larger than 1MB,
so we should cap the request size to avoid any performance degradation
in kernels later than v4.3
This degradation is caused from d2be537c3ba3568acd79cd178327b842e60d035e,
which changed max_sectors_kb to 1280k, but the hardware is able to work
fine with it, so the true fix should be from hpsa driver.
Signed-off-by: Yadan Fan <ydfan@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is actually just a small set of mainly bug fixes for the original
merge window code plus a few trivial updates and qedi boot from SAN
support feature patch"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libfc: pass an error pointer to fc_disc_error()
scsi: hisi_sas: make several const arrays static
scsi: qla2xxx: Off by one in qlt_ctio_to_cmd()
scsi: sg: fix SG_DXFER_FROM_DEV transfers
scsi: virtio_scsi: always read VPD pages for multiqueue too
scsi: qedf: fix spelling mistake: "offlading" -> "offloading"
scsi: qedi: fix another spelling mistake: "alloction" -> "allocation"
scsi: isci: fix typo in function names
scsi: cxlflash: return -EFAULT if copy_from_user() fails
scsi: qedi: Add support for Boot from SAN over iSCSI offload
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
"It's been usually busy for summer, with most of the efforts centered
around TCMU developments and various target-core + fabric driver bug
fixing activities. Not particularly large in terms of LoC, but lots of
smaller patches from many different folks.
The highlights include:
- ibmvscsis logical partition manager support (Michael Cyr + Bryant
Ly)
- Convert target/iblock WRITE_SAME to blkdev_issue_zeroout (hch +
nab)
- Add support for TMR percpu LUN reference counting (nab)
- Fix a potential deadlock between EXTENDED_COPY and iscsi shutdown
(Bart)
- Fix COMPARE_AND_WRITE caw_sem leak during se_cmd quiesce (Jiang Yi)
- Fix TMCU module removal (Xiubo Li)
- Fix iser-target OOPs during login failure (Andrea Righi + Sagi)
- Breakup target-core free_device backend driver callback (mnc)
- Perform TCMU add/delete/reconfig synchronously (mnc)
- Fix TCMU multiple UIO open/close sequences (mnc)
- Fix TCMU CHECK_CONDITION sense handling (mnc)
- Fix target-core SAM_STAT_BUSY + TASK_SET_FULL handling (mnc + nab)
- Introduce TYPE_ZBC support in PSCSI (Damien Le Moal)
- Fix possible TCMU memory leak + OOPs when recalculating cmd base
size (Xiubo Li + Bryant Ly + Damien Le Moal + mnc)
- Add login_keys_workaround attribute for non RFC initiators (Robert
LeBlanc + Arun Easi + nab)"
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (68 commits)
iscsi-target: Add login_keys_workaround attribute for non RFC initiators
Revert "qla2xxx: Fix incorrect tcm_qla2xxx_free_cmd use during TMR ABORT"
tcmu: clean up the code and with one small fix
tcmu: Fix possbile memory leak / OOPs when recalculating cmd base size
target: export lio pgr/alua support as device attr
target: Fix return sense reason in target_scsi3_emulate_pr_out
target: Fix cmd size for PR-OUT in passthrough_parse_cdb
tcmu: Fix dev_config_store
target: pscsi: Introduce TYPE_ZBC support
target: Use macro for WRITE_VERIFY_32 operation codes
target: fix SAM_STAT_BUSY/TASK_SET_FULL handling
target: remove transport_complete
pscsi: finish cmd processing from pscsi_req_done
tcmu: fix sense handling during completion
target: add helper to copy sense to se_cmd buffer
target: do not require a transport_complete for SCF_TRANSPORT_TASK_SENSE
target: make device_mutex and device_list static
tcmu: Fix flushing cmd entry dcache page
tcmu: fix multiple uio open/close sequences
tcmu: drop configured check in destroy
...
|
|
This patch is basically to silence a static checker warning.
drivers/scsi/libfc/fc_disc.c:326 fc_disc_error()
warn: passing a valid pointer to 'PTR_ERR'
It doesn't affect runtime because it treats -ENOMEM and a valid pointer
the same. But the documentation says we should be passing an error
pointer.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Don't populate various tables on the stack but make them static const.
Makes the object code smaller by over 280 bytes:
Before:
text data bss dec hex filename
39887 5080 64 45031 afe7 hisi_sas_v2_hw.o
After:
text data bss dec hex filename
39318 5368 64 44750 aece hisi_sas_v2_hw.o
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are "req->num_outstanding_cmds" elements in the
req->outstanding_cmds[] array so the > here should be >=.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
SG_DXFER_FROM_DEV transfers do not necessarily have a dxferp as we set
it to NULL for the old sg_io read/write interface, but must have a
length bigger than 0. This fixes a regression introduced by commit
28676d869bbb ("scsi: sg: check for valid direction before starting the
request")
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Fixes: 28676d869bbb ("scsi: sg: check for valid direction before starting the request")
Reported-by: Chris Clayton <chris2553@googlemail.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Chris Clayton <chris2553@googlemail.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
