summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/qla2xxx/qla_def.h
AgeCommit message (Collapse)Author
2020-08-17scsi: qla2xxx: Fix WARN_ON in qla_nvme_register_hbaArun Easi
qla_nvme_register_hba() puts out a warning when there are not enough queue pairs available for FC-NVME. Just fail the NVME registration rather than a WARNING + call Trace. Link: https://lore.kernel.org/r/20200806111014.28434-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01scsi: qla2xxx: SAN congestion management implementationShyam Sundar
* Firmware Initialization with SCM enabled based on NVRAM setting and firmware support (About Firmware). * Enable PUREX and add support for fabric performance impact notification (FPIN) handling. * Allocate a default PUREX item for each vha to handle memory allocation failures in ISR. Link: https://lore.kernel.org/r/20200630102229.29660-3-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: James Smart <james.smart@broadcom.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-07-01scsi: qla2xxx: Change in PUREX to handle FPIN ELS requestsShyam Sundar
SAN Congestion Management generates ELS pkts whose size can vary and be > 64 bytes. Change the PUREX handling code to support non-standard ELS pkt size. Link: https://lore.kernel.org/r/20200630102229.29660-2-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Fix endianness annotations in header filesBart Van Assche
Annotate members of FC protocol and firmware dump data structures as big endian. Annotate members of RISC control structures as little endian. Annotate mailbox registers as little endian. Annotate the mb[] arrays as CPU-endian because communication of the mb[] values with the hardware happens through the readw() and writew() functions. readw() converts from __le16 to u16 and writew() converts from u16 to __le16. Annotate 'handles' as CPU-endian because for the firmware these are opaque values. Link: https://lore.kernel.org/r/20200518211712.11395-15-bvanassche@acm.org CC: Hannes Reinecke <hare@suse.de> Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into ↵Bart Van Assche
lower case This was suggested by Daniel Wagner. Link: https://lore.kernel.org/r/20200518211712.11395-12-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Fix the code that reads from mailbox registersBart Van Assche
Make the MMIO accessors strongly typed such that the compiler checks whether the accessor function is used that matches the register width. Fix those MMIO accesses where another number of bits was read or written than the size of the register. Link: https://lore.kernel.org/r/20200518211712.11395-11-bvanassche@acm.org Cc: Nilesh Javali <njavali@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-19scsi: qla2xxx: Simplify the functions for dumping firmwareBart Van Assche
Instead of passing an argument to the firmware dumping functions that tells these functions whether or not to obtain the hardware lock, obtain that lock before calling these functions. This patch fixes the following recently introduced C=2 build error: CHECK drivers/scsi/qla2xxx/qla_tmpl.c drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: Expected ; at end of statement drivers/scsi/qla2xxx/qla_tmpl.c:1133:1: error: got } drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: Expected } at end of function drivers/scsi/qla2xxx/qla_tmpl.h:247:0: error: got end-of-input Link: https://lore.kernel.org/r/20200518211712.11395-4-bvanassche@acm.org Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Cc: Arun Easi <aeasi@marvell.com> Cc: Nilesh Javali <njavali@marvell.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-29scsi: qla2xxx: make 1-bit bit-fields unsigned intColin Ian King
The bitfields mpi_fw_dump_reading and mpi_fw_dumped are currently signed which is not recommended as the representation is an implementation defined behaviour. Fix this by making the bit-fields unsigned ints. Link: https://lore.kernel.org/r/20200428102013.1040598-1-colin.king@canonical.com Fixes: cbb01c2f2f63 ("scsi: qla2xxx: Fix MPI failure AEN (8200) handling") Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-04-24scsi: qla2xxx: Fix MPI failure AEN (8200) handlingArun Easi
Today, upon an MPI failure AEN, on top of collecting an MPI dump, a regular firmware dump is also taken and then chip reset. This is disruptive to IOs and not required. Make the firmware dump collection, followed by chip reset, optional (not done by default). Firmware dump buffer and MPI dump buffer are independent of each other with this change and each can have dump that was taken at two different times for two different issues. The MPI dump is saved in a separate buffer and is retrieved differently from firmware dump. To collect full dump on MPI failure AEN, a module parameter is introduced: ql2xfulldump_on_mpifail (default: 0) Link: https://lore.kernel.org/r/20200331104015.24868-2-njavali@marvell.com Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Update BPM enablement semantics.Andrew Vasquez
commit e4e3a2ce9556 ("scsi: qla2xxx: Add ability to autodetect SFP type") takes a heavy handed approach to BPM (Buffer Plus Management) enablement: 1) During hardware initialization, if an LR-capable transceiver is recognized, the driver schedules a disruptive post-initialization chip-reset (ISP-ABORT) to allow the BPM settings to be sent to the firmware. This chip-reset will result in (short-term) path-loss to all fc-rports and their attached SCSI devices. 2) LR-detection is triggered during any link-up event, resulting in a refresh and potential chip-reset Based on firmware-team guidance, upon LR-capable transceiver recognition, the driver's hardware initialization code will now re-execute firmware with the new BPM settings, then continue on with driver initialization. To address the second issue, the driver performs LR-capable detection upon the driver receiving a transceiver-insertion asynchronous event from firmware. No short-term path loss is needed with this new semantic. Link: https://lore.kernel.org/r/20200226224022.24518-10-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Andrew Vasquez <andrewv@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Use a dedicated interrupt handler for 'handshake-required' ISPsAndrew Vasquez
There's no point checking flags.disable_msix_handshake in the interrupt handler hot-path. Instead perform the check during queue-pair instantiation and use the proper interrupt handler. Link: https://lore.kernel.org/r/20200226224022.24518-8-hmadhani@marvell.com Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Andrew Vasquez <andrewv@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Convert MAKE_HANDLE() from a define into an inline functionBart Van Assche
This patch allows sparse to verify the endianness of the arguments passed to make_handle(). Link: https://lore.kernel.org/r/20200220043441.20504-5-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Suppress endianness complaints in qla2x00_configure_local_loop()Bart Van Assche
Instead of changing endianness in-place, write the data in CPU endian format in another buffer and copy that buffer back. This patch does not change any functionality but silences some sparse endianness warnings. Link: https://lore.kernel.org/r/20200220043441.20504-3-bvanassche@acm.org Cc: Roman Bolshakov <r.bolshakov@yadro.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-28scsi: qla2xxx: Simplify the code for aborting SCSI commandsBart Van Assche
Since the SCSI core does not reuse the tag of the SCSI command that is being aborted by .eh_abort() before .eh_abort() has finished it is not necessary to check from inside that callback whether or not the SCSI command has already completed. Instead, rely on the firmware to return an error code when attempting to abort a command that has already completed. Additionally, rely on the firmware to return an error code when attempting to abort an already aborted command. In qla2x00_abort_srb(), use blk_mq_request_started() instead of sp->completed and sp->aborted. Link: https://lore.kernel.org/r/20200220043441.20504-2-bvanassche@acm.org Cc: Martin Wilck <mwilck@suse.com> Cc: Quinn Tran <qutran@marvell.com> Reviewed-by: Daniel Wagner <dwagner@suse.de> Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add deferred queue for processing ABTS and RDPJoe Carnuccio
This patch adds deferred queue for processing aborts and RDP in the driver. Link: https://lore.kernel.org/r/20200212214436.25532-14-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add vendor extended FDMI commandsJoe Carnuccio
This patch adds support for extended FDMI commands and cleans up code to reduce duplication. Link: https://lore.kernel.org/r/20200212214436.25532-10-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add vendor extended RDP additions and amendmentsJoe Carnuccio
This patch adds RDP command support in the driver. With the help of new ql2xsmartsan parameter, driver will use PUREX IOCB mode to send RDP command to switch and will be able to receive various diagnostic data. Link: https://lore.kernel.org/r/20200212214436.25532-8-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add changes in preparation for vendor extended FDMI/RDPJoe Carnuccio
This patch prepares code for implementing Vendor specific extended FDMI/RDP commands. It also addes support for MBC_GET_PORT_DATABASE and MBC_GET_RNID_PARAMS commands. Link: https://lore.kernel.org/r/20200212214436.25532-7-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-24scsi: qla2xxx: Add endianizer macro calls to fc host statsJoe Carnuccio
This patch fixes endian warning for fc_host_stats. Link: https://lore.kernel.org/r/20200212214436.25532-6-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-21scsi: qla2xxx: Add sysfs node for D-Port Diagnostics AEN dataJoe Carnuccio
This patch adds sysfs node to show D-Port diag data. Link: https://lore.kernel.org/r/20200212214436.25532-4-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-02-21scsi: qla2xxx: Add beacon LED config sysfs interfaceJoe Carnuccio
This patch provides an interface to do the following (using MBC 0x3B): - Displays (in hex) the LED config words for all three LEDs. - Programs the config words for one LED or for all three LEDs. The sysfs node defined is named beacon_config. First, to allow driver to gain LED control, do this: # echo 1 > /sys/class/scsi_host/host#/beacon Then, to display config words for all three LEDs do this: # cat /sys/class/scsi_host/host#/beacon_config To set config words for all three LEDs do this: # echo 3 xxxx yyyy zzzz > /sys/class/scsi_host/host#/beacon_config Or, to set config word for a specific single LED n do this: # echo n xxxx > /sys/class/scsi_host/host#/beacon_config where n is the LED number (0, 1, 2) Finally, to restore LED control back to firmware, do this: # echo 0 > /sys/class/scsi_host/host#/beacon Link: https://lore.kernel.org/r/20200212214436.25532-2-hmadhani@marvell.com Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-01-02scsi: qla2xxx: Improve readability of the code that handles qla_flt_headerBart Van Assche
Declare qla_hw_data.flt as a qla_flt_header pointer instead of as a void pointer. Add a zero-length array at the end of struct qla_flt_header to make it clear that qla_flt_header and qla_flt_region are contiguous. This patch removes several casts but does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Quinn Tran <qutran@marvell.com> Cc: Martin Wilck <mwilck@suse.com> Cc: Daniel Wagner <dwagner@suse.de> Cc: Roman Bolshakov <r.bolshakov@yadro.com> Link: https://lore.kernel.org/r/20191219004706.39039-1-bvanassche@acm.org Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-21scsi: qla2xxx: Fix stuck login session using prli_pend_timerQuinn Tran
Session is stuck if driver sees FW has received a PRLI. Driver allows FW to finish with processing of PRLI by checking back with FW at a later time to see if the PRLI has finished. Instead, driver failed to push forward after re-checking PRLI completion. Fixes: ce0ba496dccf ("scsi: qla2xxx: Fix stuck login session") Cc: stable@vger.kernel.org # 5.3 Link: https://lore.kernel.org/r/20191217220617.28084-9-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Cleanup unused async_logout_doneShyam Sundar
This patch removes unused qla2x00_async_logout_done from the code. Link: https://lore.kernel.org/r/20191217220617.28084-5-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-19scsi: qla2xxx: Add a shadow variable to hold disc_state history of fcportShyam Sundar
This patch adds a shadow variable to hold disc_state history for the fcport and prints state transition when the logging is enabled. Link: https://lore.kernel.org/r/20191217220617.28084-4-hmadhani@marvell.com Signed-off-by: Shyam Sundar <ssundar@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-12-09scsi: qla2xxx: Use explicit LOGO in target modeQuinn Tran
Target makes implicit LOGO on session teardown. LOGO ELS is not send on the wire and initiator is not aware that target no longer wants talking to it. Initiator keeps sending I/O requests, target responds with BA_RJT, they time out and then initiator sends ABORT TASK (ABTS-LS). Current behaviour incurs unneeded I/O timeout and can be fixed for some initiators by making explicit LOGO on session deletion. Link: https://lore.kernel.org/r/20191125165702.1013-3-r.bolshakov@yadro.com Reviewed-by: Hannes Reinecke <hare@suse.de> Tested-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-08scsi: qla2xxx: don't use zero for FC4_PRIORITY_NVMEMartin Wilck
Avoid an uninitialized value (0) for ha->fc4_type_priority being falsely interpreted as NVMe priority. Not strictly needed any more after the previous patch, but makes the fc4_type_priority handling more explicit. Link: https://lore.kernel.org/r/20191107224839.32417-3-martin.wilck@suse.com Tested-by: David Bond <dbond@suse.com> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-08scsi: qla2xxx: Fix double scsi_done for abort pathQuinn Tran
Current code assumes abort will remove the original command from the active list where scsi_done will not be called. Instead, the eh_abort thread will do the scsi_done. That is not the case. Instead, we have a double scsi_done calls triggering use after free. Abort will tell FW to release the command from FW possesion. The original command will return to ULP with error in its normal fashion via scsi_done. eh_abort path would wait for the original command completion before returning. eh_abort path will not perform the scsi_done call. Fixes: 219d27d7147e0 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-6-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-11-08scsi: qla2xxx: Do command completion on abort timeoutQuinn Tran
On switch, fabric and mgt command timeout, driver send Abort to tell FW to return the original command. If abort is timeout, then return both Abort and original command for cleanup. Fixes: 219d27d7147e0 ("scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commands") Cc: stable@vger.kernel.org # 5.2 Link: https://lore.kernel.org/r/20191105150657.8092-3-hmadhani@marvell.com Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-09scsi: qla2xxx: Dual FCP-NVMe target port supportMichael Hernandez
Some storage arrays advertise FCP LUNs and NVMe namespaces behind the same WWN. The driver now offers a user option by way of NVRAM parameter to allow users to choose, on a per port basis, the kind of FC-4 type they would like to prioritize for login. Link: https://lore.kernel.org/r/20190912180918.6436-9-hmadhani@marvell.com Signed-off-by: Michael Hernandez <mhernandez@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-23scsi: qla2xxx: Fix N2N link resetQuinn Tran
Fix stalled link recovery for N2N with FC-NVMe connection. Link: https://lore.kernel.org/r/20190912180918.6436-6-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-09-23scsi: qla2xxx: Optimize NPIV tear down processQuinn Tran
In the case of NPIV port is being torn down, this patch will set a flag to indicate VPORT_DELETE. This would prevent relogin to be triggered. Link: https://lore.kernel.org/r/20190912180918.6436-5-hmadhani@marvell.com Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Introduce qla2x00_els_dcmd2_free()Bart Van Assche
This patch reduces code duplication. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Inline the qla2x00_fcport_event_handler() functionBart Van Assche
Instead of calling qla2x00_fcport_event_handler() and letting the switch statement inside that function decide which other function to call, call the latter function directly. Remove the event member from the event_arg structure because it is no longer needed. Remove the qla_handle_els_plogi_done() function because it is never called. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Report invalid mailbox status codesBart Van Assche
It is easy to mix up the QLA_* and the MBS_* status codes. Complain loudly if that happens. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Let the compiler check the type of the SCSI command context ↵Bart Van Assche
pointer Split srb_cmd.ctx into two pointers such that the compiler can check the type of that pointer. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Fix a race condition between aborting and completing a SCSI ↵Bart Van Assche
command Instead of allocating a struct srb dynamically from inside .queuecommand(), set qla2xxx_driver_template.cmd_size such that struct scsi_cmnd and struct srb are contiguous. Do not call QLA_QPAIR_MARK_BUSY() / QLA_QPAIR_MARK_NOT_BUSY() for SRBs associated with SCSI commands. That is safe because scsi_remove_host() is called before queue pairs are deleted and scsi_remove_host() waits for all outstanding SCSI commands to finish. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Enable type checking for the SRB free and done callback functionsBart Van Assche
Since all pointers passed to the srb_t.done() and srb_t.free() functions have type srb_t, change the type of the first argument of these functions from void * into struct srb *. This allows the compiler to verify the argument types for these functions. This patch does not change any functionality. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Introduce the be_id_t and le_id_t data types for FC src/dst IDsBart Van Assche
Introduce the be_id_t and le_id_t data types for Fibre Channel source and destination ID formats supported by the firmware instead of using an uint8_t[3] array. Introduce functions for converting from and to the port_id_t data types. This patch does not change the behavior of the qla2xxx driver but improves source code readability and also allows the compiler to verify the endianness of Fibre Channel IDs. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Check the PCI info string output buffer sizeBart Van Assche
Pass the output buffer size to the code that generates a PCI info string and check the output buffer size while generating a PCI info string. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Change data_dsd into an arrayBart Van Assche
This patch does not change any functionality but fixes a Coverity complaint about using a scalar as an array. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-12scsi: qla2xxx: Improve Linux kernel coding style conformanceBart Van Assche
Insert a space where required, surround complex expressions in macros with parentheses, use the UL suffix instead of the (unsigned long) cast, do not use line continuations when not necessary and do not explicitly initialize static variables to zero. Cc: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-08-07scsi: qla2xxx: Fix premature timer expirationQuinn Tran
For any qla2xxx async command, the SRB buffer is used to send it. In setting up the SRB buffer, the timer for this command is started before all memory allocation has finished. Under low memory pressure, memory alloc can go to sleep and not wake up before the timer expires. Once timer has expired, the timer thread will access uninitialize fields resulting into NULL pointer crash. This patch fixes this crash by moving the start of timer after everything is setup. backtrace shows following PID: 3720 TASK: ffff996928401040 CPU: 0 COMMAND: "qla2xxx_1_dpc" 0 [ffff99652751b698] __schedule at ffffffff965676c7 1 [ffff99652751b728] schedule at ffffffff96567bc9 2 [ffff99652751b738] schedule_timeout at ffffffff965655e8 3 [ffff99652751b7e0] io_schedule_timeout at ffffffff9656726d 4 [ffff99652751b810] congestion_wait at ffffffff95fd8d12 5 [ffff99652751b870] isolate_migratepages_range at ffffffff95fddaf3 6 [ffff99652751b930] compact_zone at ffffffff95fdde96 7 [ffff99652751b980] compact_zone_order at ffffffff95fde0bc 8 [ffff99652751ba20] try_to_compact_pages at ffffffff95fde481 9 [ffff99652751ba80] __alloc_pages_direct_compact at ffffffff9655cc31 10 [ffff99652751bae0] __alloc_pages_slowpath at ffffffff9655d101 11 [ffff99652751bbd0] __alloc_pages_nodemask at ffffffff95fc0e95 12 [ffff99652751bc80] dma_generic_alloc_coherent at ffffffff95e3217f 13 [ffff99652751bcc8] x86_swiotlb_alloc_coherent at ffffffff95e6b7a1 14 [ffff99652751bcf8] qla2x00_rft_id at ffffffffc055b5e0 [qla2xxx] 15 [ffff99652751bd50] qla2x00_loop_resync at ffffffffc0533e71 [qla2xxx] 16 [ffff99652751be68] qla2x00_do_dpc at ffffffffc05210ca [qla2xxx] PID: 0 TASK: ffffffff96a18480 CPU: 0 COMMAND: "swapper/0" 0 [ffff99652fc03ae0] machine_kexec at ffffffff95e63674 1 [ffff99652fc03b40] __crash_kexec at ffffffff95f1ce12 2 [ffff99652fc03c10] crash_kexec at ffffffff95f1cf00 3 [ffff99652fc03c28] oops_end at ffffffff9656c758 4 [ffff99652fc03c50] no_context at ffffffff9655aa7e 5 [ffff99652fc03ca0] __bad_area_nosemaphore at ffffffff9655ab15 6 [ffff99652fc03cf0] bad_area_nosemaphore at ffffffff9655ac86 7 [ffff99652fc03d00] __do_page_fault at ffffffff9656f6b0 8 [ffff99652fc03d70] do_page_fault at ffffffff9656f915 9 [ffff99652fc03da0] page_fault at ffffffff9656b758 [exception RIP: unknown or invalid address] RIP: 0000000000000000 RSP: ffff99652fc03e50 RFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff99652b79a600 RCX: ffff99652b79a760 RDX: ffff99652b79a600 RSI: ffffffffc0525ad0 RDI: ffff99652b79a600 RBP: ffff99652fc03e60 R8: ffffffff96a18a18 R9: ffffffff96ee3c00 R10: 0000000000000002 R11: ffff99652fc03de8 R12: ffff99652b79a760 R13: 0000000000000100 R14: ffffffffc0525ad0 R15: ffff99652b79a600 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 10 [ffff99652fc03e50] qla2x00_sp_timeout at ffffffffc0525af8 [qla2xxx] 11 [ffff99652fc03e68] call_timer_fn at ffffffff95ea7f58 12 [ffff99652fc03ea0] run_timer_softirq at ffffffff95eaa3bd 13 [ffff99652fc03f18] __do_softirq at ffffffff95ea0f05 14 [ffff99652fc03f88] call_softirq at ffffffff9657832c 15 [ffff99652fc03fa0] do_softirq at ffffffff95e2e675 16 [ffff99652fc03fc0] irq_exit at ffffffff95ea1285 17 [ffff99652fc03fd8] smp_apic_timer_interrupt at ffffffff965796c8 18 [ffff99652fc03ff0] apic_timer_interrupt at ffffffff96575df2 Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30scsi: qla2xxx: Fix abort timeout race condition.Quinn Tran
If an abort times out, the Abort IOCB completion and Abort timer can race against each other. This patch provides unique error code for timer path to allow proper cleanup. [mkp: typo] Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: qla2xxx: move IO flush to the front of NVME rport unregistrationQuinn Tran
On session deletion, current qla code would unregister an NVMe session before flushing IOs. This patch would move the unregistration of NVMe session after IO flush. This way FC-NVMe layer would not have to wait for stuck IOs. In addition, qla2xxx would stop accepting new IOs during session deletion. Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race conditionQuinn Tran
This patch uses kref to protect access between fcp_abort path and nvme command and LS command completion path. Stack trace below shows the abort path is accessing stale memory (nvme_private->sp). When command kref reaches 0, nvme_private & srb resource will be disconnected from each other. Any subsequence nvme abort request will not be able to reference the original srb. [ 5631.003998] BUG: unable to handle kernel paging request at 00000010000005d8 [ 5631.004016] IP: [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx] [ 5631.004086] Workqueue: events qla_nvme_abort_work [qla2xxx] [ 5631.004097] RIP: 0010:[<ffffffffc087df92>] [<ffffffffc087df92>] qla_nvme_abort_work+0x22/0x100 [qla2xxx] [ 5631.004109] Call Trace: [ 5631.004115] [<ffffffffaa4b8174>] ? pwq_dec_nr_in_flight+0x64/0xb0 [ 5631.004117] [<ffffffffaa4b9d4f>] process_one_work+0x17f/0x440 [ 5631.004120] [<ffffffffaa4bade6>] worker_thread+0x126/0x3c0 Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-27scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devicesArun Easi
BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx] PGD 800000084cf41067 PUD 84d288067 PMD 0 Oops: 0000 [#1] SMP Call Trace: [<ffffffff98abcfdf>] process_one_work+0x17f/0x440 [<ffffffff98abdca6>] worker_thread+0x126/0x3c0 [<ffffffff98abdb80>] ? manage_workers.isra.26+0x2a0/0x2a0 [<ffffffff98ac4f81>] kthread+0xd1/0xe0 [<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40 [<ffffffff9918ad37>] ret_from_fork_nospec_begin+0x21/0x21 [<ffffffff98ac4eb0>] ? insert_kthread_work+0x40/0x40 RIP [<ffffffffc050d10c>] qla_nvme_unregister_remote_port+0x6c/0xf0 [qla2xxx] The crash is due to a bad entry in the nvme_rport_list. This list is not protected, and when a remoteport_delete callback is called, driver traverses the list and crashes. Actually, the list could be removed and driver could traverse the main fcport list instead. Fix does exactly that. Signed-off-by: Arun Easi <aeasi@marvell.com> Signed-off-by: Himanshu Madhani <hmadhani@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Use __le64 instead of uint32_t[2] for sending DMA addresses ↵Bart Van Assche
to firmware This patch makes the code easier to read and more compact. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Introduce the dsd32 and dsd64 data structuresBart Van Assche
Introduce two structures for the (DMA address, length) combination instead of using separate structure members for the DMA address and length. This patch fixes several Coverity complaints about 'cur_dsd' being used to write outside the bounds of structure members. Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-29scsi: qla2xxx: Fix race conditions in the code for aborting SCSI commandsBart Van Assche
In the *_done() functions, instead of returning early if sp->ref_count >= 2, only decrement sp->ref_count. In qla2xxx_eh_abort(), instead of deciding what to do based on the value of sp->ref_count, decide which action to take depending on the completion status of the firmware abort. Remove srb.cwaitq and use srb.comp instead. In qla2x00_abort_srb(), call isp_ops->abort_command() directly instead of calling qla2xxx_eh_abort(). Cc: Himanshu Madhani <hmadhani@marvell.com> Cc: Giridhar Malavali <gmalavali@marvell.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-18 18:00:55 +0000