summaryrefslogtreecommitdiffstats
path: root/drivers/s390/net
AgeCommit message (Collapse)Author
2020-09-10s390/qeth: delay draining the TX buffersJulian Wiedmann
Wait until the QDIO data connection is severed. Otherwise the device might still be processing the buffers, and end up accessing skb data that we already freed. Fixes: 8b5026bc1693 ("s390/qeth: fix qdio teardown after early init error") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-31s390/qeth: use all configured RX buffersJulian Wiedmann
The (misplaced) comment doesn't make any sense, enforcing an uninitialized RX buffer won't help with IRQ reduction. So make the best use of all available RX buffers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: don't process empty bridge port eventsJulian Wiedmann
Discard events that don't contain any entries. This shouldn't happen, but subsequent code relies on being able to use entry 0. So better be safe than accessing garbage. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: integrate RX refill worker with NAPIJulian Wiedmann
Running a RX refill outside of NAPI context is inherently racy, even though the worker is only started for an entirely idle RX ring. >From the moment that the worker has replenished parts of the RX ring, the HW can use those RX buffers, raise an IRQ and cause our NAPI code to run concurrently to the RX refill worker. Instead let the worker schedule our NAPI instance, and refill the RX ring from there. Keeping accurate count of how many buffers still need to be refilled also removes some quirky arithmetic from the low-level code. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-31s390/qeth: tolerate pre-filled RX bufferJulian Wiedmann
When preparing a buffer for RX refill, tolerate that it already has a pool_entry attached. Otherwise we could easily leak such a pool_entry when re-driving the RX refill after an error (from eg. do_qdio()). This needs some minor adjustment in the code that drains RX buffer(s) prior to RX refill and during teardown, so that ->pool_entry is NULLed accordingly. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-27s390/ism: indicate correct error reason in ism_alloc_dmb()Karsten Graul
When the ism driver allocates a new dmb in ism_alloc_dmb() it must first check for and reserve a slot in the sba bitmap. When find_next_zero_bit() finds no free slot then the return code is -ENOMEM. This code conflicts with the error when the alloc() fails later in the code. As a result of that the caller can not differentiate between out-of-memory conditions and sba-bitmap-full conditions. Fix that by using the return code -ENOSPC when the sba slot reservation failed. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: constify the MPC initialization dataJulian Wiedmann
We're not modifying these data blobs, so mark them as constant. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: unify RX-mode hashtablesJulian Wiedmann
To keep track of the addresses programmed from an RX modeset, we have two separate hashtables (L2: mac_htable, L3: ip_mc_htable). These are never used at the same time, so unify them into a single rx_mode_addrs hashtable. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: cleanup OAT codeJulian Wiedmann
While initially just trying to fix up the indentation, condense a few lines and get rid of a goto label. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up a magic number in the OAT callbackJulian Wiedmann
Use the correct struct member instead of hardcoding its offset. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: use u64_to_user_ptr() in the OAT codeJulian Wiedmann
Use the correct helper for casting to a user pointer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: clean up error handling for isolation mode cmdsJulian Wiedmann
As the cmd IO path has learned to propagate errnos back to its callers, let them deal with errors instead of trying to restore their previous configuration from within the IO error path. Also translate the HW error to a meaningful errno, instead of returning -EIO for all cases (and don't map this to -EOPNOTSUPP later on...). While at it, add a READ_ONCE() / WRITE_ONCE() pair to ensure that the data path always sees a valid isolation mode during reconfiguration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: don't clear the configured isolation modeJulian Wiedmann
When qeth_set_access_ctrl_online() is called during the device's initialization and discovers that isolation mode isn't supported, don't clear the user's currently configured mode. They intentionally choose to operate the device in this specific mode, and degrading the isolation is not an option. Only adjust the configuration when called via sysfs (ie. fallback = 1), and here follow the common pattern and restore it from prev_isolation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: only init the isolation mode when necessaryJulian Wiedmann
A newly initialized device defaults to ISOLATION_MODE_NONE, don't bother with programming this a second time. Then remove the OSD/OSX check, it's already done in the sysfs path whenever the user actually changes the configuration. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: fine-tune errno when cmds are cancelledJulian Wiedmann
If we cancel all pending cmds (eg. when tearing down the device), don't blame it on an IO error. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14s390/qeth: reject unsupported link type earlierJulian Wiedmann
Rather than delaying the decision until netdev setup, immediately reject a device when we discover that it has an unsupported link type (ie. Token Ring). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18s390/qeth: let isolation mode override HW offload restrictionsJulian Wiedmann
When a device is configured with ISOLATION_MODE_FWD, traffic never goes through the internal switch. Don't apply the offload restrictions in this case. Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-18s390/qeth: fix error handling for isolation mode cmdsJulian Wiedmann
Current(?) OSA devices also store their cmd-specific return codes for SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code. So once we added stricter checking for the top-level field a while ago, none of the error logic that rolls back the user's configuration to its old state is applied any longer. For this specific cmd, go back to the old model where we peek into the cmd structure even though the top-level field indicated an error. Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-08Merge tag 's390-5.8-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add support for multi-function devices in pci code. - Enable PF-VF linking for architectures using the pdev->no_vf_scan flag (currently just s390). - Add reipl from NVMe support. - Get rid of critical section cleanup in entry.S. - Refactor PNSO CHSC (perform network subchannel operation) in cio and qeth. - QDIO interrupts and error handling fixes and improvements, more refactoring changes. - Align ioremap() with generic code. - Accept requests without the prefetch bit set in vfio-ccw. - Enable path handling via two new regions in vfio-ccw. - Other small fixes and improvements all over the code. * tag 's390-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (52 commits) vfio-ccw: make vfio_ccw_regops variables declarations static vfio-ccw: Add trace for CRW event vfio-ccw: Wire up the CRW irq and CRW region vfio-ccw: Introduce a new CRW region vfio-ccw: Refactor IRQ handlers vfio-ccw: Introduce a new schib region vfio-ccw: Refactor the unregister of the async regions vfio-ccw: Register a chp_event callback for vfio-ccw vfio-ccw: Introduce new helper functions to free/destroy regions vfio-ccw: document possible errors vfio-ccw: Enable transparent CCW IPL from DASD s390/pci: Log new handle in clp_disable_fh() s390/cio, s390/qeth: cleanup PNSO CHSC s390/qdio: remove q->first_to_kick s390/qdio: fix up qdio_start_irq() kerneldoc s390: remove critical section cleanup from entry.S s390: add machine check SIGP s390/pci: ioremap() align with generic code s390/ap: introduce new ap function ap_get_qdev() Documentation/s390: Update / remove developerWorks web links ...
2020-05-28s390/cio, s390/qeth: cleanup PNSO CHSCAlexandra Winter
CHSC3D (PNSO - perform network subchannel operation) is used for OC0 (Store-network-bridging-information) as well as for OC3 (Store-network-address-information). So common fields are renamed from *brinfo* to *pnso*. Also *_bridge_host_* is changed into *_addr_change_*, e.g. qeth_bridge_host_event to qeth_addr_change_event, for the same reasons. The keywords in the card traces are changed accordingly. Remove unused L3 types, as PNSO will only return Layer2 entries. Make PNSO CHSC implementation more consistent with existing API usage: Add new function ccw_device_pnso() to drivers/s390/cio/device_ops.c and the function declaration to arch/s390/include/asm/ccwdev.h, which takes a struct ccw_device * as parameter instead of schid and calls chsc_pnso(). PNSO CHSC has no strict relationship to qdio. So move the calling function from qdio to qeth_l2 and move the necessary structures to a new file arch/s390/include/asm/chsc.h. Do response code evaluation only in chsc_error_from_response() and use return code in all other places. qeth_anset_makerc() was meant to evaluate the PNSO response code, but never did, because pnso_rc was already non-zero. Indentation was corrected in some places. Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-19s390/net: remove pm support from iucv driversJulian Wiedmann
Commit 394216275c7d ("s390: remove broken hibernate / power management support") removed support for ARCH_HIBERNATION_POSSIBLE on s390. So drop the unused pm ops from the iucv drivers. CC: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-19s390/net: remove pm ops from ccwgroup driversJulian Wiedmann
commit 5e1fb45ec8e2 ("s390/ccwgroup: remove pm support") removed power management support from the ccwgroup bus driver. So remove the associated callbacks from all ccwgroup drivers. CC: Vineeth Vijayan <vneethv@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Move the bpf verifier trace check into the new switch statement in HEAD. Resolve the overlapping changes in hinic, where bug fixes overlap the addition of VF support. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-13s390/ism: fix error return code in ism_probe()Wei Yongjun
Fix to return negative error code -ENOMEM from the smcd_alloc_dev() error handling case instead of 0, as done elsewhere in this function. Fixes: 684b89bc39ce ("s390/ism: add device driver for internal shared memory") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Conflicts were all overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: clean up Kconfig help textJulian Wiedmann
Remove a stale doc link. While at it also reword the help text to get rid of an outdated marketing term. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: return error when starting a reset failsJulian Wiedmann
When starting the reset worker via sysfs is unsuccessful, return an error to the user. Modernize the sysfs input parsing while at it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: set TX IRQ marker on last buffer in a groupJulian Wiedmann
When qeth_flush_buffers() gets called for a group of TX buffers (currently up to 2 for OSA-style devices), the code iterates over each buffer for some final processing. During this processing, it sets the TX IRQ marker on the leading buffer rather than the last one. This can result in delayed TX completion of the trailing buffers. So pull the IRQ marker code out of the loop, and apply it to the final buffer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: indicate contiguous TX buffer elementsJulian Wiedmann
The TX path usually maps the full content of a page into a buffer element. But there's specific skb layouts (ie. linearized TSO skbs) where the HW header (1) requires a separate buffer element, and (2) is page-contiguous with the packet data that's mapped into the next buffer element. Flag such buffer elements accordingly, so that HW can optimize its data access for them. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: merge TX skb mapping codeJulian Wiedmann
Merge the __qeth_fill_buffer() helper into its only caller. This way all mapping-related context is in one place, and we can make some more use of it in a subsequent patch. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: don't use restricted offloads for local trafficJulian Wiedmann
Current OSA models don't support TSO for traffic to local next-hops, and some old models didn't offer TX CSO for such packets either. So as part of .ndo_features_check, check if a packet's next-hop resides on the same OSA Adapter. Opt out from affected HW offloads accordingly. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: extract helpers for next-hop lookupJulian Wiedmann
These will be used in a subsequent patch. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: add debugfs file for local IP addressesJulian Wiedmann
For debugging purposes, provide read access to the local_addr caches via debug/qeth/<dev_name>/local_addrs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: process local address eventsJulian Wiedmann
In configurations where specific HW offloads are in use, OSA adapters will raise notifications to their virtual devices about the IP addresses that currently reside on the same adapter. Cache these addresses in two RCU-enabled hash tables, and flush the tables once the relevant HW offload(s) get disabled. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-06s390/qeth: keep track of LP2LP capability for csum offloadJulian Wiedmann
When enabling TX CSO, make a note of whether the device has support for LP2LP offloading. This will become relevant in subsequent patches. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-04s390/qeth: fix cancelling of TX timer on dev_close()Julian Wiedmann
With the introduction of TX coalescing, .ndo_start_xmit now potentially starts the TX completion timer. So only kill the timer _after_ TX has been disabled. Fixes: ee1e52d1e4bb ("s390/qeth: add TX IRQ coalescing support for IQD devices") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-06s390/qdio: remove cdev from init_dataJulian Wiedmann
It's no longer needed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06s390/qdio: allow for non-contiguous SBAL array in init_dataJulian Wiedmann
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers() for each individual queue. But when later passing the SBAL addresses to qdio_establish(), they need to be in a single array of pointers. So if the driver uses multiple Input or Output queues, it needs to allocate a temporary array just to present all its SBAL pointers in this layout. This patch slightly changes the format of the QDIO initialization data, so that drivers can pass a per-queue array where each element points to a queue's SBAL array. zfcp doesn't use multiple queues, so the impact there is trivial. For qeth this brings a nice reduction in complexity, and removes a page-sized allocation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06s390/qdio: cleanly split alloc and establishJulian Wiedmann
All that qdio_allocate() actually uses from the init_data is the cdev, and the number of Input and Output Queues. Have the driver pass those as parameters, and defer the init_data processing into qdio_establish(). This includes writing per-device(!) trace entries, and most of the sanity checks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-04Merge tag 's390-5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...
2020-03-29s390/qeth: support net namespaces for L3 devicesJulian Wiedmann
Enable the L3 driver's IPv4 address notifier to watch for events on qeth devices that have been moved into a net namespace. We need to program those IPs into the HW just as usual, otherwise inbound traffic won't flow. Fixes: 6133fb1aa137 ("[NETNS]: Disable inetaddr notifiers in namespaces other than initial.") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27s390/qeth: phase out OSN supportJulian Wiedmann
OSN devices currently spend an awful long time in qeth_l2_set_online() until various unsupported HW cmds time out. This has been broken for over two years, ever since commit d22ffb5a712f ("s390/qeth: fix IPA command submission race") triggered a FW bug in cmd processing. Prior to commit 782e4a792147 ("s390/qeth: don't poll for cmd IO completion"), this wait for timeout would have even been spent busy-polling. The offending patch was picked up by stable and all relevant distros, and yet noone noticed. OSN setups only ever worked in combination with an out-of-tree blob, and the last machine that even offered HW with OSN support was released back in 2015. Rather than attempting to work-around this FW issue for no actual gain, add a deprecation warning so anyone who still wants to maintain this part of the code can speak up. Else rip it all out in 2021. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27s390/qeth: make OSN / OSX support configurableJulian Wiedmann
The last machine generation that supports OSN is z13, and OSX is only supported up to z14. Allow users and distros to decide whether they still need support for these device types. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27s390/qeth: remove fake_broadcast attributeJulian Wiedmann
Ever since commit 4a71df50047f ("qeth: new qeth device driver") introduced this attribute, it can be read & written but has no actual effect. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-27s390/ism: remove pm supportUrsula Braun
As s390 no longer supports ARCH_HIBERNATION_POSSIBLE, drop the unused pm ops from the ism driver. Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-03-25s390/qeth: modernize two list helpersJulian Wiedmann
Replace list_for_each() with list_for_each_entry(), and list_entry(head.next) with list_first_entry(). Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25s390/qeth: keep track of fixed prio-queue configurationJulian Wiedmann
When a device is configured in prio-queue mode to pin all traffic onto a specific HW queue, treat this as a distinct variant of prio-queueing instead of QETH_NO_PRIO_QUEUEING. This corrects an error message from qeth_osa_set_output_queues() for devices configured in such a mode. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25s390/qeth: fine-tune MAC Address-related errnosJulian Wiedmann
Return the correct errnos when .ndo_set_mac_address fails to set a new MAC address. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-25s390/qeth: add TX IRQ coalescing support for IQD devicesJulian Wiedmann
Since IQD devices complete (most of) their transmissions synchronously, they don't offer TX completion IRQs and have no HW coalescing controls. But we can fake the easy parts in SW, and give the user some control wrt to how often the TX NAPI code should be triggered to process the TX completions. Having per-queue controls can in particular help the dedicated mcast queue, as it likely benefits from different fine-tuning than what the ucast queues need. CC: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-09 17:06:29 +0000