summaryrefslogtreecommitdiffstats
path: root/drivers/rtc
AgeCommit message (Collapse)Author
2017-08-24rtc: mxc: avoid disabling interrupts on device closeAlexandre Belloni
Currently, the IRQs are disabled when the rtc character device is closed. This means that the device needs to stay open to get alarms while the usual use case will open the device, set the alarm and close the device as is done in rtcwake. Keep the alarm functional on character device release so the platform can actually wakeup. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24rtc: vr41xx: make alarms usefulAlexandre Belloni
Currently, the IRQs are disabled when the rtc character device is closed. This means that the device needs to stay open to get alarms while the usual use case will open the device, set the alarm and close the device. Keep the alarms functional on character device release. Note that the PIE are never enabled and would anyway be disabled by the core. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24rtc: sa1100: make alarms usefulAlexandre Belloni
Currently, the driver unregisters the IRQs when the rtc character device is closed. This means that the device needs to stay open to get alarms while the usual use case will open the device, set the alarm and close the device. Move the IRQ requests to sa1100_rtc_probe() and use the devm managed versions so we don't need to free them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24rtc: sa1100: fix unbalanced clk_prepare_enable/clk_disable_unprepareAlexandre Belloni
In the error path of sa1100_rtc_open(), info->clk is disabled which will happen again in sa1100_rtc_remove() when the module is removed whereas it is only enabled once in sa1100_rtc_init(). Fixes: 0cc0c38e9139 ("drivers/rtc/rtc-sa1100.c: move clock enable/disable to probe/remove") Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24rtc: pxa: fix possible race conditionAlexandre Belloni
pxa_rtc_open() registers the interrupt handler which will access the RTC registers. However, pxa_rtc_open() is called before the register range is ioremapped. Instead, call it after devm_ioremap(). Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24rtc: m41t80: remove debug sysfs attributeAlexandre Belloni
The last remaining sysfs attribute is undocumented and useless as it can only be used to debug the driver. Remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-24rtc: m41t80: enable wakealarm when "wakeup-source" is specifiedEric Cooper
Don't require an IRQ if the wakeup-source device-tree property is present. Signed-off-by: Eric Cooper <ecc@cmu.edu> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-22rtc: puv3: make alarms usefulAlexandre Belloni
Currently, the driver unregisters the IRQs when the rtc character device is closed. This means that the device needs to stay open to get alarms while the usual use case will open the device, set the alarm and close the device. Move the IRQ requests to puv3_rtc_probe() and use the devm managed versions so we don't need to free them. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-08-22rtc: puv3: switch to devm_rtc_allocate_device()/rtc_register_device()Alexandre Belloni
Use managed RTC device allocation as this allows for further cleanup. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: max8925: remove redundant check on retColin Ian King
The check on ret < 0 is redundant as the goto destination is the next statment. Remove this redudant check and goto. Detected by CoverityScan, CID#1268785 ("Identical code for different branches") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: sun6i: ensure clk_data is kfree'd on errorColin Ian King
There are two error return paths that do not kfree clk_data and we end up with a memory leak. Fix these with a kfree error exit path. Detected by CoverityScan, CID#1402959 ("Resource Leak") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: sun6i: Remove double init of spinlock in sun6i_rtc_clk_init()Alexey Klimov
Remove double init of spinlock in sun6i_rtc_clk_init() Fixes: 847b8bf62eb4 ("rtc: sun6i: Expose the 32kHz oscillator") Signed-off-by: Alexey Klimov <alexey.klimov@arm.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: ds1307: remove legacy check for "isil, irq2-can-wakeup-machine" propertyHeiner Kallweit
Commit 8b44f5be20fd ("ARM: dts: armada: replace isil,irq2-can-wakeup-machine with wakeup-source property") removed the last usage of "isil,irq2-can-wakeup-machine" almost two years ago. So I think we can get rid of supporting this legacy binding. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: s35390a: implement ioctlsFabien Lahoudere
Implements RTC_VL_READ and RTC_VL_CLR ioctls. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-31rtc: s35390a: handle invalid RTC timeFabien Lahoudere
If RTC time have been altered by low voltage, we notify users that RTC time is invalid by returning -EINVAL. The RTC time needs to be set correctly to clear the invalid flag. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-13Merge tag 'rtc-4.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Here is the pull-request for the RTC subsystem for 4.13. Subsystem: - expose non volatile RAM using nvmem instead of open coding in many drivers. Unfortunately, this option has to be enabled by default to not break existing users. - rtctest can now test for cutoff dates, showing when an RTC will start failing to properly save time and date. - new RTC registration functions to remove race conditions in drivers Newly supported RTCs: - Broadcom STB wake-timer - Epson RX8130CE - Maxim IC DS1308 - STMicroelectronics STM32H7 Drivers: - ds1307: use regmap, use nvmem, more cleanups - ds3232: temperature reading support - gemini: renamed to ftrtc010 - m41t80: use CCF to expose the clock - rv8803: use nvmem - s3c: many cleanups - st-lpc: fix y2106 bug" * tag 'rtc-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (51 commits) rtc: Remove wrong deprecation comment nvmem: include linux/err.h from header rtc: st-lpc: make it robust against y2038/2106 bug rtc: rtctest: add check for problematic dates tools: timer: add rtctest_setdate rtc: ds1307: remove ds1307_remove rtc: ds1307: use generic nvmem rtc: ds1307: switch to rtc_register_device rtc: rv8803: remove rv8803_remove rtc: rv8803: use generic nvmem support rtc: rv8803: switch to rtc_register_device rtc: add generic nvmem support rtc: at91rm9200: remove race condition rtc: introduce new registration method rtc: class separate id allocation from registration rtc: class separate device allocation from registration rtc: stm32: add STM32H7 RTC support dt-bindings: rtc: stm32: add support for STM32H7 rtc: ds1307: add ds1308 variant rtc: ds3232: add temperature support ...
2017-07-09rtc: st-lpc: make it robust against y2038/2106 bugBenjamin Gaignard
Make driver use u64 variables and functions to be sure that it will support dates after year 2038. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: ds1307: remove ds1307_removeAlexandre Belloni
ds1307_remove() is now empty, remove it Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: ds1307: use generic nvmemAlexandre Belloni
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: ds1307: switch to rtc_register_deviceAlexandre Belloni
This removes a possible race condition and crash and allows for further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: rv8803: remove rv8803_removeAlexandre Belloni
rv8803_remove() is now empty, remove it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: rv8803: use generic nvmem supportAlexandre Belloni
Instead of adding a binary sysfs attribute from the driver (which suffers from a race condition as the attribute appears after the device), use the core to register an nvmem device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: rv8803: switch to rtc_register_deviceAlexandre Belloni
This removes a possible race condition and allows for further improvement of the driver. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: add generic nvmem supportAlexandre Belloni
Many RTCs have an on board non volatile storage. It can be battery backed RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace and in-kernel consumers. This stays compatible with the previous (non documented) ABI that was using /sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about the deprecation. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: at91rm9200: remove race conditionAlexandre Belloni
While highly unlikely, it is possible to get an interrupt as soon as it is requested. In that case, at91_rtc_interrupt() will be called with rtc == NULL. Solve that by using devm_rtc_allocate_device/rtc_register_device. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: introduce new registration methodAlexandre Belloni
Introduce rtc_register_device() to register an already allocated and initialized struct rtc_device. It automatically sets up the owner and the two steps allocation/registration will allow to remove race conditions in the IRQ handling of some driver. It also allows to properly extend the core without adding more arguments to rtc_device_register(). Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: class separate id allocation from registrationAlexandre Belloni
Create rtc_device_get_id to allocate the id for an RTC. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-07rtc: class separate device allocation from registrationAlexandre Belloni
Create rtc_allocate_device to allocate memory for a struct rtc_device and initialize it. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: stm32: add STM32H7 RTC supportAmelie Delaunay
This patch adds support for STM32H7 RTC. On STM32H7, the RTC bus interface clock (APB clock) needs to be enabled. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: ds1307: add ds1308 variantSean Nyekjaer
The ds1308 variant is very similar to the already supported ds1338 variant, it have more debug registers and a square wave clock output. Signed-off-by: Sean Nyekjaer <sean.nyekjaer@prevas.dk> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: ds3232: add temperature supportKirill Esipov
DS3232/DS3234 has the temperature registers with a resolution of 0.25 degree celsius. This enables to get the value through hwmon. # cat /sys/class/hwmon/hwmon0/temp1_input 37250 Signed-off-by: Kirill Esipov <yesipov@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: rtc-nuc900: fix loop timeout testDan Carpenter
We should change this post-op to a pre-op because we want the loop to exit with "timeout" set to zero. Fixes: 0a89b55364e0 ("nuc900/rtc: change the waiting for device ready implement") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: gemini/ftrtc010: rename driver and symbolsLinus Walleij
The Gemini RTC is actually a generic IP block from Faraday Technology names FTRTC010. Rename the driver file and all symbols to match this IP name. The relationship can be clearly seen in the U-Boot driver posted by Po-Yu Chuang for the Faraday A320 board: https://lists.denx.de/pipermail/u-boot/2009-September/061326.html Remove the dependency on ARCH_GEMINI but select the driver for ARCH_GEMINI so we get a smooth transition. The IP block is synthsized on different silicon and architectures. Cc: Po-Yu Chuang <ratbert@faraday-tech.com> Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: gemini: Add optional clock handlingLinus Walleij
This makes the Gemini optionally take two clock references to the PCLK and EXTCLK. As we are adding a clock framework to the Gemini platform we need to make sure that we get the right references. Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-06rtc: ds1307: factor out century bit handlingHeiner Kallweit
The driver has lots of places with chip-specific code what doesn't necessarily facilitate maintenance. Let's describe chip-specific differences in century bit handling in struct chip_desc to improve this. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-05rtc: ds1307: use regmap_update_bits where applicableHeiner Kallweit
After the switch to regmap we can now make use of regmap_update_bits to simplify read/modify/write ops. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-05rtc: brcmstb-waketimer: Add Broadcom STB wake-timerBrian Norris
This adds support for the Broadcom STB wake-timer which is a timer in the chip's 27Mhz clock domain that offers the ability to wake the system (wake-up source) from suspend states (S2, S3, S5). It is supported using the rtc framework allowing us to configure alarms for system wake-up. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Markus Mayer <mmayer@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: ds1307: Add support for Epson RX8130CEMarek Vasut
Add support for yet another RTC chip, Epson RX8130CE. This time around, the chip has slightly permutated registers and also the register starts at 0x10 instead of 0x0 . So far, we only support the RTC and NVRAM parts of the chip, Alarm and Timer is not supported. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Handle clock enable failuresKrzysztof Kozlowski
clk_enable() can fail so handle such case. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Handle clock prepare failures in probeKrzysztof Kozlowski
clk_prepare_enable() can fail so handle such case. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Do not remove const from rodata memoryKrzysztof Kozlowski
All instances of struct s3c_rtc_data are in fact static const thus put in rodata so we should not drop the const while getting the pointer to them. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Drop unneeded cast to void pointerKrzysztof Kozlowski
There is no need for casting to void pointer for of_device_id data. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Minor white-space cleanupsKrzysztof Kozlowski
Minor cleanups to make the code easier to read. No functional changes. 1. Remove one space before labels as this is nowadays mostly preferred. 2. Fix indentation of arguments in function calls. 3. Split structure member declaration. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: s3c: Jump to central exit point on getting src clock errorKrzysztof Kozlowski
In other error paths in probe, centralized exit point was used so make this consistent. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: mxc: remove unused variableDiaz de Grenu, Jose
This variable was never used. With GCC 6.2, we get the following warning: drivers/rtc/rtc-mxc.c:44:18: warning: ‘PIE_BIT_DEF’ defined but not used [-Wunused-const-variable=] static const u32 PIE_BIT_DEF[MAX_PIE_NUM][2] = { Signed-off-by: Diaz de Grenu, Jose <Jose.DiazdeGrenu@digi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24rtc: opal: Implement rtc_class_ops.alarm_irq_enable callbackVaibhav Jain
Provide an implementation of the callback rtc_class_ops.alarm_irq_enable for rtc-opal driver. This callback is called when the wake alarm is disabled via the command: 'echo 0 > /sys/class/rtc/rtc0/wakealarm' Without this the Timed-Power-On(TPO) config remains set even when its disabled by the above command and FSP will still force machine boot at previously configured alarm time. The callback is implemented as function opal_tpo_alarm_irq_enable() which calls opal_set_tpo_time() with alarm.enabled == 0. A branch is added to opal_set_tpo_time() to handle this case by passing y_m_d == h_m_s_ms == 0 to opal as arguments for opal_tpo_write() call. Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-20sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list namingIngo Molnar
So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-03rtc: remove rtc_device.nameAlexandre Belloni
rtc->name is only used in messages were it is superfluous. Remove it completely from the structure. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: ds1307: avoid using rtc-nameAlexandre Belloni
ds1307->rtc->name is a copy of ds1307->name, use it instead. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-03rtc: pcf8563: avoid using rtc->nameAlexandre Belloni
pcf8563->rtc->name is a copy of pcf8563_driver.driver.name, use it instead Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-26 14:45:03 +0000