summaryrefslogtreecommitdiffstats
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2014-01-27Merge tag 'pwm/for-3.14-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm changes from Thierry Reding: "The patches for this release cycle include various enhancements (device tree support, better compile coverage, ...) for existing drivers. There is a new driver for Atmel SoCs. Various drivers as well as the sysfs support received minor fixes and cleanups" * tag 'pwm/for-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: tiecap: Remove duplicate put_sync call pwm: tiehrpwm: use dev_err() instead of pr_err() pwm: pxa: remove unnecessary space before tabs pwm: ep93xx: split module author names pwm: use seq_puts() instead of seq_printf() pwm: atmel-pwm: Do not unprepare clock after successful registration of: Add Atmel PWM controller device tree binding pwm: atmel-pwm: Add Atmel PWM controller driver backlight: pwm_bl: Remove error message upon devm_kzalloc() failure pwm: pca9685: depends on I2C rather than REGMAP_I2C pwm: renesas-tpu: Enable driver compilation with COMPILE_TEST pwm: jz4740: Use devm_clk_get() pwm: jz4740: Pass device to clk_get() pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macro pwm: pxa: Add device tree support
2014-01-23pwm: tiecap: Remove duplicate put_sync callSourav Poddar
Remove duplicate 'pm_runtime_put_sync' in the remove path. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-01-21pwm: Add LP3943 PWM driverMilo Kim
This is the other of the LP3943 MFD driver. LP3943 can be used as a PWM generator, up to 2 channels. * Two PWM generators supported * Supported PWM operations request, free, config, enable and disable * Pin assignment A driver data, 'pin_used' is checked when a PWM is requested. If the output pin is already assigned, then returns as failure. If the pin is available, 'pin_used' is set. When the PWM is not used anymore, then it is cleared. It is defined as unsigned long type for atomic bit operation APIs, but only LSB 16bits are used because LP3943 has 16 outputs. Signed-off-by: Milo Kim <milo.kim@ti.com> Acked-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-12-20pwm: tiehrpwm: use dev_err() instead of pr_err()Jingoo Han
Use dev_err() instead of pr_err() to provide a better message to userspace. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-20pwm: pxa: remove unnecessary space before tabsJingoo Han
Remove unnecessary space before tabs in order to fix the following checkpatch warning. WARNING: please, no space before tabs Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-20pwm: ep93xx: split module author namesJingoo Han
Split module author names in order to fix the following checkpatch warning. WARNING: quoted string split across lines Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-20pwm: use seq_puts() instead of seq_printf()Jingoo Han
For a constant format without additional arguments, use seq_puts() instead of seq_printf(). Also, the following checkpatch warning is fixed. WARNING: Prefer seq_puts to seq_printf Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-20pwm: atmel-pwm: Do not unprepare clock after successful registrationBo Shen
When the PWM controller is registered successfully, the clock can not unprepare, so fix it. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-17pwm: atmel-pwm: Add Atmel PWM controller driverBo Shen
Add a PWM framework driver for the PWM controller found on Atmel SoCs. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> [thierry.reding: coding style and other minor cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-17pwm: pca9685: depends on I2C rather than REGMAP_I2CAxel Lin
REGMAP_I2C is not a visible config option. Thus make PWM_PCA9685 depend on I2c and then select REGMAP_I2C. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-12pwm: renesas-tpu: Enable driver compilation with COMPILE_TESTLaurent Pinchart
This helps increasing build testing coverage. Cc: Thierry Reding <thierry.reding@gmail.com> Cc: linux-pwm@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-12pwm: jz4740: Use devm_clk_get()Lars-Peter Clausen
Using the managed version of clk_get() makes the code a bit shorter and the error paths less complicated. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-12pwm: jz4740: Pass device to clk_get()Lars-Peter Clausen
In preparation to switching the jz4740 clk driver to the common clk framework make sure to pass the device to clk_get(). Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-04pwm: sysfs: Convert to use ATTRIBUTE_GROUPS macroAxel Lin
Use new ATTRIBUTE_GROUPS macro to reduce the number of lines of code. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-12-04pwm: pxa: Add device tree supportMike Dunn
This patch adds device tree support to the PXA's PWM driver. Nothing needs to be extracted from the device tree node by the PWM device. Client devices need only specify the period; the per-chip index is implicitly zero because one device node must be present for each PWM output in use. This approach is more convenient due to the wide variability in the number of PWM channels present across the various PXA variants, and is made possible by the fact that the register sets for each PWM channel are segregated from each other. An of_xlate() method is added to parse this single-cell node. The existing ID table is reused for the match table data. Tested on a Palm Treo 680 (both platform data and DT cases). Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-11-01pwm: samsung: Fix kernel warning while unexporting a channelSachin Kamat
PWM channel data was set to NULL before freeing it. This caused the following kernel warning while unexporting the channel. Set the channel data to NULL after freeing it. [ 70.495000] WARNING: CPU: 0 PID: 1 at drivers/base/devres.c:805 pwm_put+0x48/0x80() [ 70.505000] Modules linked in: [ 70.505000] CPU: 0 PID: 1 Comm: sh Not tainted 3.12.0-rc6-next-20131024-00012-gd4aec04-dirty #58 [ 70.515000] [<c0014ddc>] (unwind_backtrace+0x0/0xf4) from [<c0011784>] (show_stack+0x10/0x14) [ 70.525000] [<c0011784>] (show_stack+0x10/0x14) from [<c03a3cbc>] (dump_stack+0x7c/0xb0) [ 70.530000] [<c03a3cbc>] (dump_stack+0x7c/0xb0) from [<c001de68>] (warn_slowpath_common+0x6c/0x88) [ 70.540000] [<c001de68>] (warn_slowpath_common+0x6c/0x88) from [<c001df20>] (warn_slowpath_null+0x1c/0x24) [ 70.550000] [<c001df20>] (warn_slowpath_null+0x1c/0x24) from [<c01d1af8>] (pwm_put+0x48/0x80) [ 70.560000] [<c01d1af8>] (pwm_put+0x48/0x80) from [<c01d21c8>] (pwm_unexport_store+0x94/0xac) [ 70.565000] [<c01d21c8>] (pwm_unexport_store+0x94/0xac) from [<c010991c>] (sysfs_write_file+0x148/0x1d8) [ 70.575000] [<c010991c>] (sysfs_write_file+0x148/0x1d8) from [<c00b2a80>] (vfs_write+0xb4/0x1a0) [ 70.585000] [<c00b2a80>] (vfs_write+0xb4/0x1a0) from [<c00b3068>] (SyS_write+0x3c/0x78) [ 70.595000] [<c00b3068>] (SyS_write+0x3c/0x78) from [<c000e2e0>] (ret_fast_syscall+0x0/0x30) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-17pwm: add ep93xx PWM supportH Hartley Sweeten
Remove the non-standard EP93xx PWM driver in drivers/misc and add a new driver for the PWM controllers on the EP93xx platform based on the PWM framework. These PWM controllers each support 1 PWM channel with programmable duty cycle, frequency, and polarity inversion. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ryan Mallon <rmallon@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-15pwm: don't use devm_pinctrl_get_select_default() in probeWolfram Sang
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: imx: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: lpc32xx: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: mxs: Remove redundant of_match_ptrSachin Kamat
The data structure of_match_ptr() protects is always compiled in. Hence of_match_ptr() is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: twl: Include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: twl-led: Include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: samsung: Include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-10-08pwm: imx: Include linux/of.h headerSachin Kamat
'of_match_ptr' is defined in linux/of.h. Include it explicitly. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-19pwm: atmel-tcb: fix max time computation for slow clk sourceBoris BREZILLON
Use the the tcb counter width to compute the maximum time that can be represented using the slow clock source instead of the static 16 bit width. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-19pwm: atmel-tcb: add missing clk source configBoris BREZILLON
Clock source changes are never applied to the CMR register. This may lead to wrong period/duty cycle configuration. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-06Merge tag 'cleanup-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "This branch contains code cleanups, moves and removals for 3.12. There's a large number of various cleanups, and a nice net removal of 13500 lines of code. Highlights worth mentioning are: - A series of patches from Stephen Boyd removing the ARM local timer API. - Move of Qualcomm MSM IOMMU code to drivers/iommu. - Samsung PWM driver cleanups from Tomasz Figa, removing legacy PWM driver and switching over to the drivers/pwm one. - Removal of some unusued auto-generated headers for OMAP2+ (PRM/CM). There's also a move of a header file out of include/linux/i2c/ to platform_data, where it really belongs. It touches mostly ARM platform code for include changes so we took it through our tree" * tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits) ARM: OMAP2+: Add back the define for AM33XX_RST_GLOBAL_WARM_SW_MASK gpio: (gpio-pca953x) move header to linux/platform_data/ arm: zynq: hotplug: Remove unreachable code ARM: SAMSUNG: Remove unnecessary exynos4_default_sdhci*() tegra: simplify use of devm_ioremap_resource ARM: SAMSUNG: Remove plat/regs-timer.h header ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header ARM: SAMSUNG: Remove pwm-clock infrastructure ARM: SAMSUNG: Remove old PWM timer platform devices pwm: Remove superseded pwm-samsung-legacy driver ARM: SAMSUNG: Modify board files to use new PWM platform device ARM: SAMSUNG: Rework private data handling in dev-backlight pwm: Add new pwm-samsung driver ARM: mach-mvebu: remove redundant DT parsing and validation ARM: msm: Only compile io.c on platforms that use it iommu/msm: Move mach includes to iommu directory ARM: msm: Remove devices-iommu.c ARM: msm: Move mach/board.h contents to common.h ARM: msm: Migrate msm_timer to CLOCKSOURCE_OF_DECLARE ARM: msm: Remove TMR and TMR0 static mappings ...
2013-09-03pwm: pxa: Use module_platform_driverMike Dunn
Commit 76abbdde2d95a3807d0dc6bf9f84d03d0dbd4f3d pwm: Add sysfs interface causes a kernel oops due to a null pointer dereference on PXA platforms. This happens because the class added by the patch is registered in a subsys_initcall (initcall4), but the pxa pwm driver is registered in arch_initcall (initcall3). If the class is not registered before the driver probe function runs, the oops occurs in device_add() when the uninitialized pointers in struct class are dereferenced. I don't see a reason that the driver must be an arch_initcall, so this patch makes it a regular module_platform_driver (initcall6), preventing the oops. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: tiehrpwm: add missing __iomem annotationJingoo Han
Fix the following sparse warnings: drivers/pwm/pwm-tiehrpwm.c:144:16: warning: incorrect type in argument 1 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:144:16: expected void const volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:144:16: got void * drivers/pwm/pwm-tiehrpwm.c:149:9: warning: incorrect type in argument 2 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:149:9: expected void volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:149:9: got void * drivers/pwm/pwm-tiehrpwm.c:157:18: warning: incorrect type in argument 1 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:157:18: expected void const volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:157:18: got void * drivers/pwm/pwm-tiehrpwm.c:160:9: warning: incorrect type in argument 2 (different address spaces) drivers/pwm/pwm-tiehrpwm.c:160:9: expected void volatile [noderef] <asn:2>*addr drivers/pwm/pwm-tiehrpwm.c:160:9: got void * Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: tiecap: add CONFIG_PM_SLEEP to ecap_pwm_{save,restore}_context()Jingoo Han
ecap_pwm_save_context() and ecap_pwm_restore_context() are only used when CONFIG_PM_SLEEP is selected. drivers/pwm/pwm-tiecap.c:293:13: warning: 'ecap_pwm_save_context' defined but not used [-Wunused-function] drivers/pwm/pwm-tiecap.c:302:13: warning: 'ecap_pwm_restore_context' defined but not used [-Wunused-function] Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: simplify use of devm_ioremap_resourceJulia Lawall
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: renesas-tpu: Add DT supportLaurent Pinchart
Specify DT bindings for the TPU PWM controller and add OF support to the driver. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: Use the DT macro directly when parsing PWM DT flagsLaurent Pinchart
Don't redefine a PWM_SPEC_POLARITY macro with a value identical to PWM_POLARITY_INVERTED, use the PWM DT macro directly. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-09-03pwm: mxs: Check the return value from stmp_reset_block()Fabio Estevam
stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-12pwm: Remove superseded pwm-samsung-legacy driverTomasz Figa
This patch removes the now unused pwm-samsung-legacy driver, which was replaced by new pwm-samsung driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-12pwm: Add new pwm-samsung driverTomasz Figa
This patch introduces new Samsung PWM driver, which is completely rewritten to be multiplatform- and DeviceTree-aware. In addition, remaining problems of old driver are fixed, such as: - proper handling of hardware variants, - synchronization on SMP systems, - handling of boundary parameter values, - hardware sharing with PWM clocksource driver, - undefined state of PWM output after stopping PWM channel. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-08-06pwm: samsung: Rename to pwm-samsung-legacyTomasz Figa
This patch renames the old pwm-samsung driver to pwm-samsung-legacy to create place for the new, rewritten, DT-aware pwm-samsung driver. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Mark Brown <broonie@linaro.org> Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thierry Reding <thierry.reding@gmail.com>
2013-07-29pwm: convert class code to use dev_groupsGreg Kroah-Hartman
The dev_attrs field of struct class is going away soon, dev_groups should be used instead. This converts the PWM class code to use the correct field. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-26pwm: pwm-tiehrpwm: Use clk_enable/disable instead clk_prepare/unprepare.Marek Belisko
This was found when using pwm-led on am33xx and enable heartbeat trigger. [ 808.624876] ================================= [ 808.629443] [ INFO: inconsistent lock state ] [ 808.634021] 3.9.0 #2 Not tainted [ 808.637415] --------------------------------- [ 808.641981] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 808.648288] swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 808.653494] (prepare_lock){+.?.+.}, at: [<c027c211>] clk_unprepare+0x15/0x24 [ 808.661040] {SOFTIRQ-ON-W} state was registered at: [ 808.666155] [<c004ec4d>] __lock_acquire+0x411/0x824 [ 808.671465] [<c004f359>] lock_acquire+0x41/0x50 [ 808.676412] [<c039ee9d>] mutex_lock_nested+0x31/0x1d8 [ 808.681912] [<c027c275>] clk_prepare+0x15/0x28 [ 808.686764] [<c0590c6b>] _init+0x117/0x1e0 [ 808.691256] [<c0019ef9>] omap_hwmod_for_each+0x29/0x3c [ 808.696842] [<c0591107>] __omap_hwmod_setup_all+0x17/0x2c [ 808.702696] [<c0008653>] do_one_initcall+0xc3/0x10c [ 808.708017] [<c058a627>] kernel_init_freeable+0xa7/0x134 [ 808.713778] [<c039a543>] kernel_init+0x7/0x98 [ 808.718544] [<c000cd95>] ret_from_fork+0x11/0x3c [ 808.723583] irq event stamp: 1379172 [ 808.727328] hardirqs last enabled at (1379172): [<c03a0759>] _raw_spin_unlock_irqrestore+0x21/0x30 [ 808.736828] hardirqs last disabled at (1379171): [<c03a03c3>] _raw_spin_lock_irqsave+0x13/0x38 [ 808.745876] softirqs last enabled at (1379164): [<c002ae5d>] irq_enter+0x49/0x4c [ 808.753747] softirqs last disabled at (1379165): [<c002aec3>] irq_exit+0x63/0x88 [ 808.761518] [ 808.761518] other info that might help us debug this: [ 808.768373] Possible unsafe locking scenario: [ 808.768373] [ 808.774578] CPU0 [ 808.777141] ---- [ 808.779705] lock(prepare_lock); [ 808.783186] <Interrupt> [ 808.785929] lock(prepare_lock); [ 808.789595] [ 808.789595] *** DEADLOCK *** [ 808.789595] [ 808.795805] 1 lock held by swapper/0: [ 808.799643] #0: (((&heartbeat_data->timer))){+.-...}, at: [<c002e204>] call_timer_fn+0x0/0x90 [ 808.808814] [ 808.808814] stack backtrace: [ 808.813402] [<c000ff19>] (unwind_backtrace+0x1/0x98) from [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) [ 808.823721] [<c039bd75>] (print_usage_bug.part.25+0x16d/0x1cc) from [<c004e595>] (mark_lock+0x18d/0x434) [ 808.833669] [<c004e595>] (mark_lock+0x18d/0x434) from [<c004ec1d>] (__lock_acquire+0x3e1/0x824) [ 808.842803] [<c004ec1d>] (__lock_acquire+0x3e1/0x824) from [<c004f359>] (lock_acquire+0x41/0x50) [ 808.852031] [<c004f359>] (lock_acquire+0x41/0x50) from [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) [ 808.861433] [<c039ee9d>] (mutex_lock_nested+0x31/0x1d8) from [<c027c211>] (clk_unprepare+0x15/0x24) [ 808.870930] [<c027c211>] (clk_unprepare+0x15/0x24) from [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) [ 808.880431] [<c019f7bf>] (ehrpwm_pwm_disable+0x5f/0x80) from [<c019f29f>] (pwm_disable+0x27/0x28) [ 808.889751] [<c019f29f>] (pwm_disable+0x27/0x28) from [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) [ 808.899431] [<c026f8f3>] (led_heartbeat_function+0x3f/0xb0) from [<c002e249>] (call_timer_fn+0x45/0x90) [ 808.909288] [<c002e249>] (call_timer_fn+0x45/0x90) from [<c002e399>] (run_timer_softirq+0x105/0x17c) [ 808.918884] [<c002e399>] (run_timer_softirq+0x105/0x17c) from [<c002abc5>] (__do_softirq+0xa5/0x150) [ 808.928486] [<c002abc5>] (__do_softirq+0xa5/0x150) from [<c002aec3>] (irq_exit+0x63/0x88) [ 808.937098] [<c002aec3>] (irq_exit+0x63/0x88) from [<c000d599>] (handle_IRQ+0x21/0x54) [ 808.945415] [<c000d599>] (handle_IRQ+0x21/0x54) from [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) [ 808.954900] [<c0008495>] (omap3_intc_handle_irq+0x5d/0x68) from [<c000c7ff>] (__irq_svc+0x3f/0x64) [ 808.964287] Exception stack(0xc05b1f68 to 0xc05b1fb0) [ 808.969587] 1f60: 00000001 00000001 00000000 00000000 c05b0000 c0619748 [ 808.978158] 1f80: c05b0000 c05b0000 c0619748 413fc082 00000000 00000000 01000000 c05b1fb0 [ 808.986719] 1fa0: c004f989 c000d6f0 400f0033 ffffffff [ 808.992024] [<c000c7ff>] (__irq_svc+0x3f/0x64) from [<c000d6f0>] (cpu_idle+0x60/0x98) [ 809.000250] [<c000d6f0>] (cpu_idle+0x60/0x98) from [<c058a535>] (start_kernel+0x1e9/0x234) Remove non atomic clk api calls and use only atomic for enable/disable because can be called from atomic context (led_heartbeat_function is timer callback). Signed-off-by: Marek Belisko <marek.belisko@streamunlimited.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-26pwm: pca9685: Fix wrong argument to set MODE1_SLEEP bitAxel Lin
Current code actually does not set MODE1_SLEEP bit because the new value for bitmask (0x1) is wrong. To set MODE1_SLEEP bit, we should pass MODE1_SLEEP as the new value for bitmask. Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-26pwm: renesas-tpu: Add MODULE_ALIAS to make module auto loading workAxel Lin
This driver can be built as module, add MODULE_ALIAS to make module auto loading work. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-25pwm: renesas-tpu: fix return value check in tpu_probe()Wei Yongjun
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Axel Lin <axel.lin@ingics.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21pwm: Add Renesas TPU PWM driverLaurent Pinchart
The Timer Pulse Unit (TPU) is a 4-channels 16-bit timer used to generate waveforms. This driver exposes PWM functions through the PWM API for other drivers to use. The code is loosely based on the leds-renesas-tpu driver by Magnus Damm and the TPU PWM driver shipped in the Armadillo EVA 800 kernel sources. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Simon Horman <horms@verge.net.au> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-21pwm: Add sysfs interfaceH Hartley Sweeten
Add a simple sysfs interface to the generic PWM framework. /sys/class/pwm/ `-- pwmchipN/ for each PWM chip |-- export (w/o) ask the kernel to export a PWM channel |-- npwm (r/o) number of PWM channels in this PWM chip |-- pwmX/ for each exported PWM channel | |-- duty_cycle (r/w) duty cycle (in nanoseconds) | |-- enable (r/w) enable/disable PWM | |-- period (r/w) period (in nanoseconds) | `-- polarity (r/w) polarity of PWM (normal/inversed) `-- unexport (w/o) return a PWM channel to the kernel Based on work by Lars Poeschel. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Rob Landley <rob@landley.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: Fill in missing .owner fieldsThierry Reding
Some drivers don't set the .owner fields of the struct device_driver or struct pwm_ops, which causes the module usage count to become wrong. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: add pca9685 driverSteffen Trumtrar
Add pwm driver for the NXP pca9685 16 channel pwm-led controller. The driver is really barebones at this stage. E.g. the OE' pin and therefore the corresponding registers are not supported. The driver was tested on a HW where this pin is tied to GND. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> [thierry.reding@gmail.com: style and whitespace cleanups] Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-12pwm: atmel-tcb: prepare clk before calling enableBoris BREZILLON
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-06-10pwm: devm: alloc correct pointer sizeWolfram Sang
The allocated object should be the size of what the pointer is pointing to and not the size of the pointer itself. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2013-05-27pwm: mxs: Let device core handle pinctrlFabio Estevam
Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Cc: Thierry Reding <thierry.reding@avionic-design.de> Cc: <linux-kernel@vger.kernel.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>