summaryrefslogtreecommitdiffstats
path: root/drivers/pwm
AgeCommit message (Collapse)Author
2020-03-30pwm: pca9685: Remove unused duty_cycle struct elementMatthias Schiffer
duty_cycle was only set, never read. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: mxs: Remove unused include of of_address.hAnson Huang
There is nothing in use from of_address.h, remove it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: imx27: Remove unused include of of_device.hAnson Huang
There is nothing in use from of_device.h, remove it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: imx-tpm: Remove unused includesAnson Huang
There is nothing in use from log2.h/of_address.h, remove them. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: Implement some checks for lowlevel driversUwe Kleine-König
There are some expectations which the callbacks provided by lowlevel drivers should fulfill. Implement checks that help driver authors to get these semantics right. As these have some overhead the checks can be disabled using a Kconfig setting. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: imx27: Ensure clocks being on iff the PWM is onUwe Kleine-König
Up to now the .probe() function didn't enable clocks and relied on the core to call the .get_state() callback to have the clock running. The latter enabled the needed clocks and kept them running if the PWM wass enabled. This only works correctly if the .get_state() callback is called exactly once and this single call happens before unused clocks are disabled by the clk core. The former wasn't true for a short period while commit 01ccf903edd6 ("pwm: Let pwm_get_state() return the last implemented state") applied and not reverted yet and might become wrong in the future. The latter isn't true any more since commit cfc4c189bc70 ("pwm: Read initial hardware state at request time") which results in a running PWM being stopped at boot time if for example the consumer lives in a kernel module that is only loaded after the clk core disabled unused clocks. So ensure .probe() is left with the clocks on if the PWM is running and .get_state() disables everything it enabled. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: imx27: Don't disable clocks at device remove timeUwe Kleine-König
The .remove() callback is not supposed to modify hardware state. This is in the responsibility of the PWM consumer. After the PWM was disabled the clocks are off (apart from a bug that is fixed in the next patch), so unbinding the driver either stops the PWM (which it should not) or disables already disabled clocks yielding warnings from the clk core. So just drop the call to disable the clocks. (Which BTW was also in the wrong order because the call makes the PWM unfunctional and so should have come only after pwmchip_remove()). Fixes: 9f4c8f9607c3 ("pwm: imx: Add ipg clock operation") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: imx27: Simplify helper function to enable and disable clocksUwe Kleine-König
pwm_imx27_clk_prepare_enable() took a pointer to a struct pwm_chip just to convert it to a struct pwm_imx27_chip pointer while all callers already have the latter. Ditto for pwm_imx27_clk_disable_unprepare(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: imx27: Fix clock handling in pwm_imx27_apply()Uwe Kleine-König
pwm_imx27_apply() enables the clocks if the previous PWM state was disabled. Given that the clocks are supposed to be left on iff the PWM is running, the decision to disable the clocks at the end of the function must not depend on the previous state. Without this fix the enable count of the two affected clocks increases by one whenever ->apply() changes from one disabled state to another. Fixes: bd88d319abe9 ("pwm: imx27: Unconditionally write state to hardware") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-30pwm: bcm2835: Dynamically allocate baseFlorian Fainelli
The newer 2711 and 7211 chips have two PWM controllers and failure to dynamically allocate the PWM base would prevent the second PWM controller instance being probed for succeeding with an -EEXIST error from alloc_pwms(). Fixes: e5a06dc5ac1f ("pwm: Add BCM2835 PWM driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-03-16clocksource/drivers/timer-ti-dm: Enable autoreload in set_pwmLokesh Vutla
dm timer ops set_load() api allows to configure the load value and to set the auto reload feature. But auto reload feature is independent of load value and should be part of configuring pwm. This way pwm can be disabled by disabling auto reload feature using set_pwm() so that the current pwm cycle will be completed. Else pwm disabling causes the cycle to be stopped abruptly. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200305082715.15861-7-lokeshvutla@ti.com
2020-01-20pwm: Remove set but not set variable 'pwm'yu kuai
Fixes gcc '-Wunused-but-set-variable' warning: drivers/pwm/pwm-pca9685.c: In function ‘pca9685_pwm_gpio_free’: drivers/pwm/pwm-pca9685.c:162:21: warning: variable ‘pwm’ set but not used [-Wunused-but-set-variable] It is never used, and so can be removed. In that case, hold and release the lock 'pca->lock' can be removed since nothing will be done between them. Fixes: e926b12c611c ("pwm: Clear chip_data in pwm_put()") Signed-off-by: yu kuai <yukuai3@huawei.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Initialize variables before useThierry Reding
GCC can't always determine that the duty, period and prescaler values are initialized when returning from sun4i_pwm_calculate(), so help out a little by initializing them to 0. Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: stm32: Remove automatic output enableFabrice Gasnier
Don't use AOE (automatic output enable) by default. In case of break events, PWM is automatically re-enabled on next PWM cycle otherwise. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Narrow scope of local variableUwe Kleine-König
The variable pval is only used in a single block in the function sun4i_pwm_calculate(). So declare it in a more local scope to simplify the function for humans and compilers. While at it also simplify assignment to pval. While the diffstat for this patch is negative for this patch I still thing the advantage of having a narrower scope is beneficial. In my compiler / .config setup (gcc 8.2.1, arm/imx_v6_v7_defconfig + COMPILE_TEST + PWM_SUN4I) this change doesn't result in any binary changes. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: bcm2835: Allow building for ARCH_BRCMSTBFlorian Fainelli
BCM7211 is supported using ARCH_BRCMSTB and uses this PWM controller driver, make it possible to build it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: imx27: Eliminate error message for defer probeAnson Huang
For defer probe error, no need to output error message which will cause confusion. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERRGustavo A. R. Silva
Fix inconsistent IS_ERR and PTR_ERR in sun4i_pwm_probe(). The proper pointers to be passed as arguments are pwm->clk and pwm->bus_clk. This bug was detected with the help of Coccinelle. Fixes: b8d74644f34a ("pwm: sun4i: Prefer "mod" clock to unnamed") Fixes: 5b090b430d75 ("pwm: sun4i: Add an optional probe for bus clock") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: sun4i: Move pwm_calculate() out of spin_lock()Clément Péron
pwm_calculate() calls clk_get_rate() while holding a spin_lock(). This create an issue as clk_get_rate() may sleep. Move pwm_calculate() out of this spin_lock(). Fixes: c32c5c50d4fe ("pwm: sun4i: Switch to atomic PWM") Reported-by: Alexander Finger <alex.mobigo@gmail.com> Sugested-by: Vasily Khoruzhick <anarsoul@gmail.com> Tested-by: Alexander Finger <alex.mobigo@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: Allow compiling with COMPILE_TESTUwe Kleine-König
The dependency on OMAP_DM_TIMER is only a runtime dependency. Also OMAP_DM_TIMER cannot be enabled without ARCH_OMAP being enabled. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: put_device() after of_find_device_by_node()Uwe Kleine-König
This was found by coccicheck: drivers/pwm/pwm-omap-dmtimer.c:304:2-8: ERROR: missing put_device; call of_find_device_by_node on line 255, but without a corresponding object release within this function. Reported-by: Markus Elfring <elfring@users.sourceforge.net> Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: Simplify error handlingUwe Kleine-König
Instead of doing error handling in the middle of ->probe(), move error handling and freeing the reference to timer to the end. This fixes a resource leak as dm_timer wasn't freed when allocating *omap failed. Implementation note: The put: label was never reached without a goto and ret being unequal to 0, so the removed return statement is fine. Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctionalUwe Kleine-König
In the old code (e.g.) mutex_destroy() was called before pwmchip_remove(). Between these two calls it is possible that a PWM callback is used which tries to grab the mutex. Fixes: 6604c6556db9 ("pwm: Add PWM driver for OMAP using dual-mode timers") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: Implement tracing for .get_state() and .apply_state()Uwe Kleine-König
This allows to log all calls to the driver's lowlevel functions which simplifies debugging in some cases. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: rcar: Document inability to set duty_cycle = 0Uwe Kleine-König
When .apply() is called with state->duty_cycle = 0 the duty_ns parameter to rcar_pwm_set_counter() is 0 which results in ph being 0 and rcar_pwm_set_counter() returning -EINVAL. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-20pwm: rcar: Drop useless call to pwm_get_state()Uwe Kleine-König
pwm_get_state has no side effects and the resulting pwm_state is unused. So drop the call to pwm_get_state() and the local variable from rcar_pwm_apply(). The call was introduced in commit 7f68ce8287d3 ("pwm: rcar: Add support "atomic" API") and already then was useless. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: Fix minor Kconfig whitespace issuesKrzysztof Kozlowski
Remove double whitespace after "config" keyword. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: atmel: Implement .get_state()Uwe Kleine-König
This function reads back the configured parameters from the hardware. As .apply() rounds down (mostly) I'm rounding up in .get_state() to achieve that applying a state just read from hardware is a no-op. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: atmel: Use register accessors for channelsUwe Kleine-König
This makes it a bit easier when instrumenting register access to only have to add code in one place. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: atmel: Document known weaknesses of both hardware and softwareUwe Kleine-König
This documents the my findings while reading through the driver and the reference manual. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: atmel: Replace loop in prescale calculation by ad-hoc calculationUwe Kleine-König
The calculated values are the same with the modified algorithm. The only difference is that the calculation is a bit more efficient. Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: atmel: Use a constant for maximum prescale valueUwe Kleine-König
The maximal prescale value is 10 for all supported variants. So drop the member in the variant description and introduce a global constant instead. This reduces the size of the variant descriptions and the .apply() callback can be compiled a bit more effectively. Acked-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: atmel: Add a hint where to find hardware documentationUwe Kleine-König
Most Microchip (formerly Atmel) chips have publicly available manuals. A comprehensive list is already contained in the documentation folder. Reference this list in the header of the driver to allow reviewers to find the relevant manuals. Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: mxs: Avoid a division in mxs_pwm_apply()Rasmus Villemoes
Since the divisor is not a compile-time constant (unless gcc somehow decided to unroll the loop PERIOD_CDIV_MAX times), this does a somewhat expensive 32/32 division. Replace that with a right shift. We still have a 64/32 division just below, but at least in that case the divisor is compile-time constant. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: mxs: Add support for inverse polarityRasmus Villemoes
If I'm reading of_pwm_xlate_with_flags() right, existing device trees that set #pwm-cells = 2 will continue to work. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: mxs: Remove legacy methodsRasmus Villemoes
Since we now have ->apply(), these are no longer relevant. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: mxs: Implement ->apply()Rasmus Villemoes
In preparation for supporting setting the polarity, switch the driver to support the ->apply() method. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add support for H6 PWMJernej Skrabec
Now that sun4i PWM driver supports deasserting reset line and enabling bus clock, support for H6 PWM can be added. Note that while H6 PWM has two channels, only first one is wired to output pin. Second channel is used as a clock source to companion AC200 chip which is bundled into same package. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add support to output source clock directlyJernej Skrabec
PWM core has an option to bypass whole logic and output unchanged source clock as PWM output. This is achieved by enabling bypass bit. Note that when bypass is enabled, no other setting has any meaning, not even enable bit. This mode of operation is needed to achieve high enough frequency to serve as clock source for AC200 chip which is integrated into same package as H6 SoC. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Always calculate params when applying new parametersClément Péron
Bypass mode will require to be re-calculated when the pwm state is changed. Remove the condition so pwm_sun4i_calculate is always called. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add an optional probe for bus clockJernej Skrabec
H6 PWM core needs bus clock to be enabled in order to work. Add an optional probe for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Prefer "mod" clock to unnamedClément Péron
New device tree bindings called the source clock of the module "mod" when several clocks are defined. Try to get a clock called "mod" if nothing is found try to get an unnamed clock. Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2020-01-08pwm: sun4i: Add an optional probe for reset lineJernej Skrabec
H6 PWM core needs deasserted reset line in order to work. Add an optional probe for it. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-12-09pwm: imx27: Unconditionally write state to hardwareThierry Reding
The i.MX driver currently uses a shortcut and doesn't write all of the state through to the hardware when the PWM is disabled. This causes an inconsistent state to be read back by consumers with the result of them malfunctioning. Fix this by always writing the full state through to the hardware registers so that the correct state can always be read back. Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-12-09pwm: imx27: Cache duty cycle register valueThierry Reding
The hardware register containing the duty cycle value cannot be accessed when the PWM is disabled. This causes the ->get_state() callback to read back a duty cycle value of 0, which can confuse consumer drivers. Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-12-09pwm: cros-ec: Cache duty cycle valueThierry Reding
The ChromeOS embedded controller doesn't differentiate between disabled and duty cycle being 0. In order not to potentially confuse consumers, cache the duty cycle and return the cached value instead of the real value when the PWM is disabled. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-12-09pwm: Read initial hardware state at request timeThierry Reding
Drivers that support reading the hardware state (using ->get_state()) may want to rely on per-PWM data to do so. Defer reading the hardware state for the first time until the PWM has been requested and after drivers have had a chance to allocate per-PWM data. Conceptually this is also a more natural place to read the hardware state because the PWM core doesn't need to know the hardware state of a PWM unless there is a user for it. This also ensures that the state is read everytime a user requests a PWM. If the PWM changes between users for some reason, the PWM core will reload the state from hardware and keep its copy of the state up-to-date. Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Michal Vokáč <michal.vokac@ysoft.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-12-05Merge tag 'pwm/for-5.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "Various changes and minor fixes across a couple of drivers" * tag 'pwm/for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: stm32: Pass breakinput instead of its values pwm: stm32: Remove clutter from ternary operator pwm: stm32: Validate breakinput data from DT pwm: Update comment on struct pwm_ops::apply pwm: sun4i: Fix incorrect calculation of duty_cycle/period pwm: stm32: Add power management support pwm: stm32: Split breakinput apply routine to ease PM support dt-bindings: pwm-stm32: Document pinctrl sleep state pwm: sun4i: Drop redundant assignment to variable pval dt-bindings: pwm: mediatek: Remove gratuitous compatible string for MT7629
2019-11-11Merge 5.4-rc7 into staging-nextGreg Kroah-Hartman
We want the staging fixes in here, and it resolves some merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-08pwm: bcm-iproc: Prevent unloading the driver module while in useUwe Kleine-König
The owner member of struct pwm_ops must be set to THIS_MODULE to increase the reference count of the module such that the module cannot be removed while its code is in use. Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-04 07:51:42 +0000