summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2018-07-14pinctrl: nsp: Fix potential NULL dereferenceWei Yongjun
platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap_nocache(e1, res->start, e2); Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: nsp: off by ones in nsp_pinmux_enable()Dan Carpenter
The > comparisons should be >= or else we read beyond the end of the pinctrl->functions[] array. Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: sh-pfc: r8a77970: remove SH_PFC_PIN_CFG_DRIVE_STRENGTH flagNiklas Söderlund
The datasheet does not document any registers to control drive strength, and no drive strength registers are for this reason described for this SoC. The flags indicating that drive strength can be controlled are however set for some pins in the driver. This leads to a NULL pointer dereference when the sh-pfc core tries to access the struct describing the drive strength registers, for example when reading the sysfs file pinconf-pins. Fix this by removing the SH_PFC_PIN_CFG_DRIVE_STRENGTH from all pins. Fixes: b92ac66a1819602b ("pinctrl: sh-pfc: Add R8A77970 PFC support") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: ingenic: Fix inverted direction for < JZ4770Paul Cercueil
The .gpio_set_direction() callback was setting inverted direction for SoCs older than the JZ4770, this restores the correct behaviour. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: mt7622: fix a kernel panic when gpio-hog is being appliedSean Wang
When we are explicitly using GPIO hogging mechanism in the pinctrl node, such as: &pio { line_input { gpio-hog; gpios = <95 0>, <96 0>, <97 0>; input; }; }; A kernel panic happens at dereferencing a NULL pointer: In this case, the drvdata is still not setup properly yet when it is being accessed. A better solution for fixing up this issue should be we should obtain the private data from struct gpio_chip using a specific gpiochip_get_data instead of a generic dev_get_drvdata. [ 0.249424] Unable to handle kernel NULL pointer dereference at virtual address 000000c8 [ 0.257818] Mem abort info: [ 0.260704] ESR = 0x96000005 [ 0.263869] Exception class = DABT (current EL), IL = 32 bits [ 0.270011] SET = 0, FnV = 0 [ 0.273167] EA = 0, S1PTW = 0 [ 0.276421] Data abort info: [ 0.279398] ISV = 0, ISS = 0x00000005 [ 0.283372] CM = 0, WnR = 0 [ 0.286440] [00000000000000c8] user address but active_mm is swapper [ 0.293027] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.298795] Modules linked in: [ 0.301958] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #389 [ 0.308716] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 0.314396] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 0.319362] pc : mtk_hw_pin_field_get+0x28/0x118 [ 0.324140] lr : mtk_hw_set_value+0x30/0x104 [ 0.328557] sp : ffffff800801b6d0 [ 0.331983] x29: ffffff800801b6d0 x28: ffffff80086b7970 [ 0.337484] x27: 0000000000000000 x26: ffffff80087b8000 [ 0.342986] x25: 0000000000000000 x24: ffffffc00324c230 [ 0.348487] x23: 0000000000000003 x22: 0000000000000000 [ 0.353988] x21: ffffff80087b8000 x20: 0000000000000000 [ 0.359489] x19: 0000000000000054 x18: 00000000fffff7c0 [ 0.364990] x17: 0000000000006300 x16: 000000000000003f [ 0.370492] x15: 000000000000000e x14: ffffffffffffffff [ 0.375993] x13: 0000000000000000 x12: 0000000000000020 [ 0.381494] x11: 0000000000000006 x10: 0101010101010101 [ 0.386995] x9 : fffffffffffffffa x8 : 0000000000000007 [ 0.392496] x7 : ffffff80085d63f8 x6 : 0000000000000003 [ 0.397997] x5 : 0000000000000054 x4 : ffffffc0031eb800 [ 0.403499] x3 : ffffff800801b728 x2 : 0000000000000003 [ 0.409000] x1 : 0000000000000054 x0 : 0000000000000000 [ 0.414502] Process swapper/0 (pid: 1, stack limit = 0x000000002a913c1c) [ 0.421441] Call trace: [ 0.423968] mtk_hw_pin_field_get+0x28/0x118 [ 0.428387] mtk_hw_set_value+0x30/0x104 [ 0.432445] mtk_gpio_set+0x20/0x28 [ 0.436052] mtk_gpio_direction_output+0x18/0x30 [ 0.440833] gpiod_direction_output_raw_commit+0x7c/0xa0 [ 0.446333] gpiod_direction_output+0x104/0x114 [ 0.451022] gpiod_configure_flags+0xbc/0xfc [ 0.455441] gpiod_hog+0x8c/0x140 [ 0.458869] of_gpiochip_add+0x27c/0x2d4 [ 0.462928] gpiochip_add_data_with_key+0x338/0x5f0 [ 0.467976] mtk_pinctrl_probe+0x388/0x400 [ 0.472217] platform_drv_probe+0x58/0xa4 [ 0.476365] driver_probe_device+0x204/0x44c [ 0.480783] __device_attach_driver+0xac/0x108 [ 0.485384] bus_for_each_drv+0x7c/0xac [ 0.489352] __device_attach+0xa0/0x144 [ 0.493320] device_initial_probe+0x10/0x18 [ 0.497647] bus_probe_device+0x2c/0x8c [ 0.501616] device_add+0x2f8/0x540 [ 0.505226] of_device_add+0x3c/0x44 [ 0.508925] of_platform_device_create_pdata+0x80/0xb8 [ 0.514245] of_platform_bus_create+0x290/0x3e8 [ 0.518933] of_platform_populate+0x78/0x100 [ 0.523352] of_platform_default_populate+0x24/0x2c [ 0.528403] of_platform_default_populate_init+0x94/0xa4 [ 0.533903] do_one_initcall+0x98/0x130 [ 0.537874] kernel_init_freeable+0x13c/0x1d4 [ 0.542385] kernel_init+0x10/0xf8 [ 0.545903] ret_from_fork+0x10/0x18 [ 0.549603] Code: 900020a1 f9400800 911dcc21 1400001f (f9406401) [ 0.555916] ---[ end trace de8c34787fdad3b3 ]--- [ 0.560722] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.560722] [ 0.570188] SMP: stopping secondary CPUs [ 0.574253] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.574253] Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: mt7622: stop using the deprecated pinctrl_add_gpio_rangeSean Wang
If the pinctrl node has the gpio-ranges property, the range will be added by the gpio core and doesn't need to be added by the pinctrl driver. But for keeping backward compatibility, an explicit pinctrl_add_gpio_range is still needed to be called when there is a missing gpio-ranges in pinctrl node in old dts files. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: mt7622: fix that pinctrl_claim_hogs cannot workSean Wang
To allow claiming hogs by pinctrl, we cannot enable pinctrl until all groups and functions are being added done. Also, it's necessary that the corresponding gpiochip is being added when the pinctrl device is enabled. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: mt7622: fix initialization sequence between eint and gpiochipSean Wang
Because gpichip applied in the driver must depend on mtk eint to implement the input data debouncing and the translation between gpio and irq, it's better to keep logic consistent with mtk eint being built prior to gpiochip being added. Cc: stable@vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-14pinctrl: mt7622: fix error path on failing at groups buildingSean Wang
It should be to return an error code when failing at groups building. Cc: stable@vger.kernel.org Fixes: d6ed93551320 ("pinctrl: mediatek: add pinctrl driver for MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: mt7622: fix a kernel panic when pio don't work as EINT controllerSean Wang
The function, external interrupt controller, is made as an optional to mt7622 pinctrl. But if we don't want pio behaves as an external interrupt controller, it would lead to hw->eint not be created properly and then will cause 'kernel NULL pointer' issue when gpiochip try to call .to_irq or .set_config. To fix it, check hw->eint before accessing the member. [ 1.339494] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [ 1.347857] Mem abort info: [ 1.350742] ESR = 0x96000005 [ 1.353905] Exception class = DABT (current EL), IL = 32 bits [ 1.360024] SET = 0, FnV = 0 [ 1.363185] EA = 0, S1PTW = 0 [ 1.366431] Data abort info: [ 1.369405] ISV = 0, ISS = 0x00000005 [ 1.373363] CM = 0, WnR = 0 [ 1.376437] [0000000000000010] user address but active_mm is swapper [ 1.383005] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 1.388748] Modules linked in: [ 1.391897] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.16.0-rc1+ #344 [ 1.398625] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 1.404279] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 1.409221] pc : mtk_eint_find_irq+0x8/0x24 [ 1.413532] lr : mtk_gpio_to_irq+0x20/0x28 [ 1.417749] sp : ffffff800801baf0 [ 1.421161] x29: ffffff800801baf0 x28: ffffff8008792f40 [ 1.426637] x27: ffffff800886b000 x26: ffffff8008615620 [ 1.432113] x25: ffffffc00e4dbdc8 x24: ffffff80087b8000 [ 1.437589] x23: ffffffc00325a000 x22: ffffffc00325a010 [ 1.443066] x21: ffffffc0033dec18 x20: 00000000ffffffea [ 1.448542] x19: ffffffc00e4db800 x18: 0000000000000130 [ 1.454018] x17: 000000000000000e x16: 0000000000000007 [ 1.459494] x15: ffffff80085ee000 x14: 0000000000000001 [ 1.464970] x13: 0000000000000001 x12: 0000000000000010 [ 1.470446] x11: 0101010101010101 x10: 0000000000000880 [ 1.475922] x9 : ffffff800801b990 x8 : ffffffc0030688e0 [ 1.481399] x7 : ffffff80080c0660 x6 : ffffffc00e4dbbb0 [ 1.486875] x5 : 0000000000000000 x4 : 0000000000000000 [ 1.492351] x3 : ffffff80082a92f4 x2 : 00000000fffffffa [ 1.497826] x1 : 0000000000000051 x0 : 0000000000000000 [ 1.503305] Process swapper/0 (pid: 1, stack limit = 0x0000000054e053bd) [ 1.510210] Call trace: [ 1.512727] mtk_eint_find_irq+0x8/0x24 [ 1.516677] mtk_gpio_to_irq+0x20/0x28 [ 1.520539] gpiod_to_irq+0x48/0x60 [ 1.524135] mmc_gpiod_request_cd_irq+0x3c/0xc4 [ 1.528804] mmc_start_host+0x6c/0x8c [ 1.532575] mmc_add_host+0x58/0x7c [ 1.536168] msdc_drv_probe+0x4fc/0x67c [ 1.540121] platform_drv_probe+0x58/0xa4 [ 1.544251] driver_probe_device+0x204/0x44c [ 1.548649] __driver_attach+0x84/0xf8 [ 1.552512] bus_for_each_dev+0x68/0xa0 [ 1.556461] driver_attach+0x20/0x28 [ 1.560142] bus_add_driver+0xec/0x240 [ 1.564002] driver_register+0x98/0xe4 [ 1.567863] __platform_driver_register+0x48/0x50 [ 1.572711] mt_msdc_driver_init+0x18/0x20 [ 1.576932] do_one_initcall+0x98/0x130 [ 1.580886] kernel_init_freeable+0x13c/0x1d4 [ 1.585375] kernel_init+0x10/0xf8 [ 1.588879] ret_from_fork+0x10/0x18 [ 1.592564] Code: a8c67bfd d65f03c0 a9bf7bfd 910003fd (f9400800) [ 1.598849] ---[ end trace 4bbcb7bc30e98492 ]--- [ 1.603677] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.603677] cc: Kevin Hilman <khilman@baylibre.com> Cc: stable@vger.kernel.org Fixes: e6dabd38d8e7 ("pinctrl: mediatek: add EINT support to MT7622 SoC") Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: actions: Fix uninitialized error in owl_pin_config_set()Geert Uytterhoeven
With gcc 4.1.2: drivers/pinctrl/actions/pinctrl-owl.c: In function ‘owl_pin_config_set’: drivers/pinctrl/actions/pinctrl-owl.c:336: warning: ‘ret’ may be used uninitialized in this function Indeed, if num_configs is zero, the uninitialized value will be returned as an error code. Fix this by preinitializing it to zero. Fixes: 2242ddfbf4d699b5 ("pinctrl: actions: Add Actions S900 pinctrl driver") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: single: Add allocation failure checking of saved_valsColin Ian King
Currently saved_vals is being allocated and there is no check for failed allocation (which is more likely than normal when using GFP_ATOMIC). Fix this by checking for a failed allocation and propagating this error return down the the caller chain. Detected by CoverityScan, CID#1469841 ("Dereference null return value") Fixes: 88a1dbdec682 ("pinctrl: pinctrl-single: Add functions to save and restore pinctrl context") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: devicetree: Fix pctldev pointer overwriteFabio Estevam
Commit b89405b6102f ("pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs") causes the pinctrl hog pins to not get initialized on i.MX platforms leaving them with the IOMUX settings untouched. This causes several regressions on i.MX such as: - OV5640 camera driver can not be probed anymore on imx6qdl-sabresd because the camera clock pin is in a pinctrl_hog group and since its pinctrl initialization is skipped, the camera clock is kept in GPIO functionality instead of CLK_CKO function. - Audio stopped working on imx6qdl-wandboard and imx53-qsb for the same reason. Richard Fitzgerald explains the problem: "I see the bug. If the hog node isn't a 1st level child of the pinctrl parent node it will go around the for(;;) loop again but on the first pass I overwrite pctldev with the result of get_pinctrl_dev_from_of_node() so it doesn't point to the pinctrl driver any more." Fix the issue by stashing the original pctldev so it doesn't get overwritten. Fixes: b89405b6102f ("pinctrl: devicetree: Fix dt_to_map_one_config handling of hogs") Cc: <stable@vger.kernel.org> Reported-by: Mika Penttilä <mika.penttila@nextfour.com> Reported-by: Steve Longerbeam <slongerbeam@gmail.com> Suggested-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-18pinctrl: mediatek: remove redundant return value check of ↵Wei Yongjun
platform_get_resource() Remove unneeded error handling on the result of a call to platform_get_resource() when the value is passed to devm_ioremap_resource(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: devm_kmalloc() -> devm_kmalloc_array()Kees Cook
The devm_kmalloc() function has a 2-factor argument form, devm_kmalloc_array(). This patch replaces cases of: devm_kmalloc(handle, a * b, gfp) with: devm_kmalloc_array(handle, a * b, gfp) as well as handling cases of: devm_kmalloc(handle, a * b * c, gfp) with: devm_kmalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kmalloc_array(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kmalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kmalloc..." instead of "= devm_kmalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kmalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kmalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kmalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kmalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kmalloc + devm_kmalloc_array (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kmalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kmalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kmalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kmalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kmalloc(HANDLE, C1 * C2 * C3, ...) | devm_kmalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kmalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kmalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kmalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kmalloc(HANDLE, C1 * C2 * C3, ...) | devm_kmalloc(HANDLE, C1 * C2, ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kmalloc + devm_kmalloc_array (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-09Merge tag 'clk-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "This time we have a good set of changes to the core framework that do some general cleanups, but nothing too major. The majority of the diff goes to two SoCs, Actions Semi and Qualcomm. A brand new driver is introduced for Actions Semi so it takes up some lines to add all the different types, and the Qualcomm diff is there because we add support for two SoCs and it's quite a bit of data. Otherwise the big driver updates are on TI Davinci and Amlogic platforms. And then the long tail of driver updates for various fixes and stuff follows after that. Core: - debugfs cleanups removing error checking and an unused provider API - Removal of a clk init typedef that isn't used - Usage of match_string() to simplify parent string name matching - OF clk helpers moved to their own file (linux/of_clk.h) - Make clk warnings more readable across kernel versions New Drivers: - Qualcomm SDM845 GCC and Video clk controllers - Qualcomm MSM8998 GCC - Actions Semi S900 SoC support - Nuvoton npcm750 microcontroller clks - Amlogic axg AO clock controller Removed Drivers: - Deprecated Rockchip clk-gate driver Updates: - debugfs functions stopped checking return values - Support for the MSIOF module clocks on Rensas R-Car M3-N - Support for the new Rensas RZ/G1C and R-Car E3 SoCs - Qualcomm GDSC, RCG, and PLL updates for clk changes in new SoCs - Berlin and Amlogic SPDX tagging - Usage of of_clk_get_parent_count() in more places - Proper implementation of the CDEV1/2 clocks on Tegra20 - Allwinner H6 PRCM clock support and R40 EMAC support - Add critical flag to meson8b's fdiv2 as temporary fixup for ethernet - Round closest support for meson's mpll driver - Support for meson8b nand clocks and gxbb video decoder clocks - Mediatek mali clks - STM32MP1 fixes - Uniphier LD11/LD20 stream demux system clock" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) clk: qcom: Export clk_fabia_pll_configure() clk: bcm: Update and add Stingray clock entries dt-bindings: clk: Update Stingray binding doc clk-si544: Properly round requested frequency to nearest match clk: ingenic: jz4770: Add 150us delay after enabling VPU clock clk: ingenic: jz4770: Enable power of AHB1 bus after ungating VPU clock clk: ingenic: jz4770: Modify C1CLK clock to disable CPU clock stop on idle clk: ingenic: jz4770: Change OTG from custom to standard gated clock clk: ingenic: Support specifying "wait for clock stable" delay clk: ingenic: Add support for clocks whose gate bit is inverted clk: use match_string() helper clk: bcm2835: use match_string() helper clk: Return void from debug_init op clk: remove clk_debugfs_add_file() clk: tegra: no need to check return value of debugfs_create functions clk: davinci: no need to check return value of debugfs_create functions clk: bcm2835: no need to check return value of debugfs_create functions clk: no need to check return value of debugfs_create functions clk: imx6: add EPIT clock support clk: mvebu: use correct bit for 98DX3236 NAND ...
2018-06-07Merge tag 'pinctrl-v4.18-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "This is the bulk of pin control changes for v4.18. No core changes this time! Just a calm all-over-the-place drivers, updates and fixes cycle as it seems. New drivers/subdrivers: - Actions Semiconductor S900 driver with more Actions variants for S700, S500 in the pipe. Also generic GPIO support on top of the same driver and IRQ support is in the pipe. - Renesas r8a77470 PFC support. - Renesas r8a77990 PFC support. - Allwinner Sunxi H6 R_PIO support. - Rockchip PX30 support. - Meson Meson8m2 support. - Remove support for the ill-fated Samsung Exynos 5440 SoC. Improvements: - Context save/restore support in pinctrl-single. - External interrupt support for the Mediatek MT7622. - Qualcomm ACPI HID QCOM8002 supported. Fixes: - Fix up suspend/resume support for Exynos 5433. - Fix Strago DMI fixes on the Intel Cherryview" * tag 'pinctrl-v4.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits) pinctrl: cherryview: limit Strago DMI workarounds to version 1.0 pinctrl: at91-pio4: add missing of_node_put pinctrl: armada-37xx: Fix spurious irq management gpiolib: discourage gpiochip_add_pin[group]_range for DT pinctrls pinctrl: msm: fix gpio-hog related boot issues MAINTAINERS: update entry for Mediatek pin controller pinctrl: mediatek: remove unused fields in struct mtk_eint_hw pinctrl: mediatek: use generic EINT register maps for each SoC pinctrl: mediatek: add EINT support to MT7622 SoC pinctrl: mediatek: refactor EINT related code for all MediaTek pinctrl can fit dt-bindings: pinctrl: add external interrupt support to MT7622 pinctrl pinctrl: freescale: Switch to SPDX identifier pinctrl: samsung: Fix suspend/resume for Exynos5433 GPF1..5 banks pinctrl: sh-pfc: rcar-gen3: Fix grammar in static pin comments pinctrl: sh-pfc: r8a77965: Add I2C pin support pinctrl: sh-pfc: r8a77990: Add EthernetAVB pins, groups and functions pinctrl: sh-pfc: r8a77990: Add I2C{1,2,4,5,6,7} pins, groups and functions pinctrl: sh-pfc: r8a77990: Add SCIF pins, groups and functions pinctrl: sh-pfc: r8a77990: Add bias pinconf support pinctrl: sh-pfc: Initial R8A77990 PFC support ...
2018-06-06Merge tag 'overflow-v4.18-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull overflow updates from Kees Cook: "This adds the new overflow checking helpers and adds them to the 2-factor argument allocators. And this adds the saturating size helpers and does a treewide replacement for the struct_size() usage. Additionally this adds the overflow testing modules to make sure everything works. I'm still working on the treewide replacements for allocators with "simple" multiplied arguments: *alloc(a * b, ...) -> *alloc_array(a, b, ...) and *zalloc(a * b, ...) -> *calloc(a, b, ...) as well as the more complex cases, but that's separable from this portion of the series. I expect to have the rest sent before -rc1 closes; there are a lot of messy cases to clean up. Summary: - Introduce arithmetic overflow test helper functions (Rasmus) - Use overflow helpers in 2-factor allocators (Kees, Rasmus) - Introduce overflow test module (Rasmus, Kees) - Introduce saturating size helper functions (Matthew, Kees) - Treewide use of struct_size() for allocators (Kees)" * tag 'overflow-v4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: treewide: Use struct_size() for devm_kmalloc() and friends treewide: Use struct_size() for vmalloc()-family treewide: Use struct_size() for kmalloc()-family device: Use overflow helpers for devm_kmalloc() mm: Use overflow helpers in kvmalloc() mm: Use overflow helpers in kmalloc_array*() test_overflow: Add memory allocation overflow tests overflow.h: Add allocation size calculation helpers test_overflow: Report test failures test_overflow: macrofy some more, do more tests for free lib: add runtime test of check_*_overflow functions compiler.h: enable builtin overflow checkers and add fallback code
2018-06-06treewide: Use struct_size() for devm_kmalloc() and friendsKees Cook
Replaces open-coded struct size calculations with struct_size() for devm_*, f2fs_*, and sock_* allocations. Automatically generated (and manually adjusted) from the following Coccinelle script: // Direct reference to struct field. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(*VAR->ELEMENT), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // mr = kzalloc(sizeof(*mr) + m * sizeof(mr->map[0]), GFP_KERNEL); @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; identifier VAR, ELEMENT; expression COUNT; @@ - alloc(HANDLE, sizeof(*VAR) + COUNT * sizeof(VAR->ELEMENT[0]), GFP) + alloc(HANDLE, struct_size(VAR, ELEMENT, COUNT), GFP) // Same pattern, but can't trivially locate the trailing element name, // or variable name. @@ identifier alloc =~ "devm_kmalloc|devm_kzalloc|sock_kmalloc|f2fs_kmalloc|f2fs_kzalloc"; expression HANDLE; expression GFP; expression SOMETHING, COUNT, ELEMENT; @@ - alloc(HANDLE, sizeof(SOMETHING) + COUNT * sizeof(ELEMENT), GFP) + alloc(HANDLE, CHECKME_struct_size(&SOMETHING, ELEMENT, COUNT), GFP) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04pinctrl: cherryview: limit Strago DMI workarounds to version 1.0Dmitry Torokhov
As Google/Intel will fix the BIOS/Coreboot issues with hardcoding virtual interrupt numbers for keyboard/touchpad/touchscreen controllers in ACPI tables, they will also update BOARD version number from 1.0 to 1.1. Let's limit the DMI quirks that try to preserve virtual IRQ numbers on Strago boards to those that still carry older BIOSes. Note that ideally not BOARD but BIOS version should have been updated. However the BIOS version used by Chrome devices has format of Google_BUILD.BRANCH.PATCH which is not well suited for DMI matching as we do not have "less than" match mode for DMI data. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197953 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-24pinctrl/stm32: Add irq_eoi for stm32gpio irqchipLudovic Barre
-Parent domain of stm32gpio evolves to hierarchy domain and could have a handle_fasteoi_irq. So an irq_eoi parent callback is needed for children. -Replace space by tabulation. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-05-24pinctrl: at91-pio4: add missing of_node_putJulia Lawall