summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
AgeCommit message (Collapse)Author
2020-09-29pinctrl: ocelot: simplify the return expression of ocelot_gpiochip_register()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131057.92895-1-miaoqinglang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: at91-pio4: add support for sama7g5 SoCEugen Hristev
Add support for sama7g5 pinctrl block, which has 5 PIO banks. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com> Link: https://lore.kernel.org/r/20200917131257.273882-2-eugen.hristev@microchip.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: spear: simplify the return expression of tvc_connect()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20200921131058.92941-1-miaoqinglang@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: spear: simplify the return expression of spear310_pinctrl_probeLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20200921082448.2591929-1-liushixin2@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: sprd: use module_platform_driver to simplify the codeLiu Shixin
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Link: https://lore.kernel.org/r/20200914065402.3726408-1-liushixin2@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: Ingenic: Add I2S pins support for Ingenic SoCs.周琰杰 (Zhou Yanjie)
1.Add I2S pins support for the JZ4780 SoC. 2.Add I2S pins support for the X1000 SoC. 3.Add I2S pins support for the X1500 SoC. 4.Add I2S pins support for the X1830 SoC. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200913065836.12156-4-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: Ingenic: Correct the pullup and pulldown parameters of JZ4780.周琰杰 (Zhou Yanjie)
Correct the pullup and pulldown parameters of JZ4780 to make them consistent with the parameters on the datasheet. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200913065836.12156-3-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: Ingenic: Add SSI pins support for JZ4770 and JZ4780.周琰杰 (Zhou Yanjie)
Add SSI pins support for the JZ4770 SoC and the JZ4780 SoC from Ingenic. Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20200913065836.12156-2-zhouyanjie@wanyeetech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed-g6: Add bias controls for 1.8V GPIO banksAndrew Jeffery
These were skipped in the original patches adding pinconf support for the AST2600. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-4-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed: Use the right pinconf maskAndrew Jeffery
The Aspeed pinconf data structures are split into 'conf' and 'map' types, where the 'conf' struct defines which register and bitfield to manipulate, while the 'map' struct defines what value to write to the register and bitfield. Both structs have a mask member, and the wrong mask was being used to tell the regmap which bits to update. A todo is to look at whether we can remove the mask from the 'map' struct. Fixes: 5f52c853847f ("pinctrl: aspeed: Use masks to describe pinconf bitfields") Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Cc: Johnny Huang <johnny_huang@aspeedtech.com> Link: https://lore.kernel.org/r/20200910025631.2996342-3-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: aspeed: Format pinconf debug consistent with pinmuxAndrew Jeffery
When displaying which pinconf register and field is being touched, format the field mask so that it's consistent with the way the pinmux portion formats the mask. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20200910025631.2996342-2-andrew@aj.id.au Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: imx: Support building i.MX pinctrl core driver as moduleAnson Huang
Change PINCTRL_IMX to tristate to support loadable module build. And i.MX common pinctrl driver should depend on CONFIG_OF to make sure no build error when i.MX common pinctrl driver is enabled for different architectures without CONFIG_OF. Also add module author, description and license. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1599552721-24872-3-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: imx: Support building SCU pinctrl core driver as moduleAnson Huang
Change PINCTR_IMX_SCU to tristate, add module author, description and license to support building SCU pinctrl core driver as module. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1599552721-24872-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-29pinctrl: imx: Use function callbacks for SCU related functionsAnson Huang
Use function callbacks for SCU related functions in pinctrl-imx.c in order to support the scenario of PINCTRL_IMX is built in while PINCTRL_IMX_SCU is built as module, all drivers using SCU pinctrl driver need to initialize the SCU related function callback, and no need to check CONFIG_PINCTRL_IMX_SCU anymore, hence stub functions also can be removed. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Link: https://lore.kernel.org/r/1599552721-24872-1-git-send-email-Anson.Huang@nxp.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-27pinctrl: mediatek: Add MT8167 Pinctrl driverFabien Parent
This commit adds the pinctrl driver for the MediaTek's MT8167 SoC. Signed-off-by: Fabien Parent <fparent@baylibre.com> Link: https://lore.kernel.org/r/20200907110221.1691168-2-fparent@baylibre.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-21Merge tag 'intel-pinctrl-v5.10-1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel intel-pinctrl for v5.10-1 * Add last part of cleanup Cherryview driver to align with other drivers * Due to above clean up Cherryview and Baytrail drivers to use common API The following is an automated git shortlog grouped by driver: baytrail: - Switch to use intel_pinctrl_get_soc_data() cherryview: - Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOs - Switch to use intel_pinctrl_get_soc_data() - Utilize temporary variable to hold device pointer - Switch to use struct intel_pinctrl - Move custom community members to separate data struct - Drop stale comment intel: - Update header block to reflect direct dependencies - Extract intel_pinctrl_get_soc_data() helper for wider use
2020-09-21Merge tag 'renesas-pinctrl-for-v5.10-tag1' of ↵Linus Walleij
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.10 - Add CAN and USB1 PWEN pin groups on R-Car H2 and RZ/G1, - Three more conversion of DT bindings to json-schema, - Group all Renesas pinctrl drivers and improve visual Kconfig structure, - Rename drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, - Minor fixes and improvements.
2020-09-15pinctrl: renesas: Reintroduce SH_PFC for common sh-pfc codeGeert Uytterhoeven
Most, but not all, Renesas pin control drivers use the "sh-pfc" pin control framework. As of commit 8449bfa9e6a9f7ec ("pinctrl: sh-pfc: Collect Renesas related CONFIGs in one place"), the code for this framework is always built when Renesas SoC pin control support is enabled, regardless of whether the enabled pin control drivers need it or not. Fix this by reintroducing the CONFIG_SH_PFC symbol to control inclusion of the "sh-pfc" framework and its dependencies, and selecting it when needed. This reduces kernel size of a typical RZ/A1 or RZ/A2 kernel by more than 6 resp. 11 KiB. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-4-geert+renesas@glider.be
2020-09-15pinctrl: Rename sh-pfc to renesasGeert Uytterhoeven
The drivers/pinctrl/sh-pfc subdirectory was originally created to group pin control drivers for various Renesas SuperH and SH-Mobile platforms. However, the name "sh-pfc" no longer reflects its contents, as the directory now contains pin control drivers for Renesas SuperH, ARM32, and ARM64 SoCs. Hence rename the subdirectory from drivers/pinctrl/sh-pfc to drivers/pinctrl/renesas, and the related Kconfig symbol from PINCTRL_SH_PFC to PINCTRL_RENESAS. Rename the git branch in MAINTAINERS, too, for consistency. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-3-geert+renesas@glider.be
2020-09-15pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}Geert Uytterhoeven
The RZ/N1 pin control driver does not use pin groups or pin functions, so there is no need to select GENERIC_PINCTRL_GROUPS or GENERIC_PINMUX_FUNCTIONS. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200909131534.12897-2-geert+renesas@glider.be
2020-09-15pinctrl: rza1: Switch to using "output-enable"Geert Uytterhoeven
For pins requiring software driven IO output operations, the RZ/A1 Pin Controller uses either the "output-high" or "output-low" DT property to enable the corresponding output buffer. The actual line value doesn't matter, as it is ignored. Commit 425562429d4f3b13 ("pinctrl: generic: Add output-enable property") introduced a new DT property for this specific use case. Update the RZ/A1 Pin Controller DT bindings and driver to use this new property instead. Preserve backwards compatibility with old DTBs in the driver, as this comes at a very small cost. Notes: - The DT binding examples already used the new property, - There are no upstream users of the old properties. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200821111401.4021-1-geert+renesas@glider.be
2020-09-15pinctrl: sh-pfc: Tidy up driver description titleKuninori Morimoto
Sort each driver by description title in alphabetical order. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87h7ssy4qy.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: sh-pfc: Align driver description titleKuninori Morimoto
Now, Renesas Pin Control drivers are under menu, but current descriptions are not aligned. This patch aligns them. - RZ/A2 gpio and pinctrl driver - RZ/N1 pinctrl driver - Emma Mobile EV2 pin control support - R-Mobile APE6 pin control support - R-Mobile A1 pin control support - RZ/G1H pin control support - RZ/G1M pin control support + pin control support for RZ/A2 + pin control support for RZ/N1 + pin control support for Emma Mobile EV2 + pin control support for R-Mobile APE6 + pin control support for R-Mobile A1 + pin control support for RZ/G1H + pin control support for RZ/G1M Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87imd8y4r2.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: sh-pfc: Collect Renesas related CONFIGs in one placeKuninori Morimoto
Renesas related pinctrl CONFIGs are located in many places, which is confusing. This patch collects them into the same place, grouped in a new "Renesas pinctrl drivers" menu. This patch also moves pinctrl-rz{a1,a2,n1}.c into the sh-pfc folder. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87k0xoy4r7.wl-kuninori.morimoto.gx@renesas.com [geert: Update path in MAINTAINERS] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-15pinctrl: sh-pfc: Tidy up Emma Mobile EV2Kuninori Morimoto
It is "Emma Mobile EV2" not "AV2". This patch tidies it up. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lfi4y4re.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-09-12pinctrl: devicetree: Keep deferring even on timeoutThierry Reding
driver_deferred_probe_check_state() may return -ETIMEDOUT instead of -EPROBE_DEFER after all built-in drivers have been probed. This can cause issues for built-in drivers that depend on resources provided by loadable modules. One such case happens on Tegra where I2C controllers are used during early boot to set up the system PMIC, so the I2C driver needs to be a built-in driver. At the same time, some instances of the I2C controller depend on the DPAUX hardware for pinmuxing. Since the DPAUX is handled by the display driver, which is usually not built-in, the pin control states will not become available until after the root filesystem has been mounted and the display driver loaded from it. Fixes: bec6c0ecb243 ("pinctrl: Remove use of driver_deferred_probe_check_state_continue()") Suggested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200825143348.1358679-1-thierry.reding@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: sx150x: Fix pinctrl enablement order bugMartin DEVERA
I encountered bug in SX1502 expander driver in 5.7.7. Here is relevant DTS part: compatible = "semtech,sx1502q"; gpio4_cfg_pins: gpio2-cfg {                         pins = "gpio5";                         output-high;     }; And part of OOPS: [    0.673996] [<c023cfa6>] (gpiochip_get_data) from [<c023b235>] (sx150x_gpio_direction_output+0xd) [    0.683259] [<c023b235>] (sx150x_gpio_direction_output) from [<c023b363>] (sx150x_pinconf_set+0x) [    0.692796] [<c023b363>] (sx150x_pinconf_set) from [<c0238fef>] (pinconf_apply_setting+0x39/0x7e) [    0.701635] [<c0238fef>] (pinconf_apply_setting) from [<c0236c77>] (pinctrl_commit_state+0xa5/0x) [    0.710648] [<c0236c77>] (pinctrl_commit_state) from [<c0237e03>] (pinctrl_enable+0xff/0x1d4) [    0.719139] [<c0237e03>] (pinctrl_enable) from [<c023b791>] (sx150x_probe+0x1a3/0x358) [    0.727027] [<c023b791>] (sx150x_probe) from [<c02c38bf>] (i2c_device_probe+0x1bb/0x1dc) The problem is that sx150x_pinconf_set uses sx150x_gpio_direction_output but gpio is not setup yet. Patch below fixes it but I'm not sure whether is it correct. Link: https://lore.kernel.org/r/f32130bf-cfd4-b1bf-538c-dbc9ee2d947a@eaxlabs.cz Signed-off-by: Martin DEVERA <devik@eaxlabs.cz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: rockchip: depend on OFHeiko Stuebner
The Rockchip pinctrl driver needs to handle information from Devicetree so only makes sense getting compiled on systems with CONFIG_OF enabled. This also fixes a problem found by the "kernel-test-robot" when compiling the driver on test-builds that do not have CONFIG_OF enabled: drivers/pinctrl/pinctrl-rockchip.c: In function 'rockchip_pinctrl_parse_groups': >> drivers/pinctrl/pinctrl-rockchip.c:2881:9: error: implicit declaration of function 'pinconf_generic_parse_dt_config'; did you mean 'pinconf_generic_dump_config'? [-Werror=implicit-function-declaration] 2881 | ret = pinconf_generic_parse_dt_config(np_config, NULL, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | pinconf_generic_dump_config drivers/pinctrl/pinctrl-rockchip.c: In function 'rockchip_gpiolib_register': >> drivers/pinctrl/pinctrl-rockchip.c:3473:5: error: 'struct gpio_chip' has no member named 'of_node' 3473 | gc->of_node = bank->of_node; Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Link: https://lore.kernel.org/r/20200905214955.907950-1-heiko@sntech.de Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: sunxi: add support for the Allwinner A100 pin controllerYangtao Li
This commit introduces support for the pin controller on A100. Signed-off-by: Yangtao Li <frank@allwinnertech.com> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/4e331a2ed4a30c883df6157bc5c52bb686aa8e0d.1595572867.git.frank@allwinnertech.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: visconti: Add Toshiba Visconti SoCs pinctrl supportNobuhiro Iwamatsu
Add pinctrl support to Toshiba Visconti SoCs. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Reviewed-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Link: https://lore.kernel.org/r/20200909204336.2558-3-nobuhiro1.iwamatsu@toshiba.co.jp Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: actions: pinctrl-s900: Constify s900_padinfo[]Rikard Falkeborn
The only usage of s900_padinfo[] is to assign it to the padinfo field in the owl_pinctrl_soc_data struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200830224311.36994-4-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: actions: pinctrl-s700: Constify s700_padinfo[]Rikard Falkeborn
The only usage of s700_padinfo[] is to assign it to the padinfo field in the owl_pinctrl_soc_data struct, which is a const pointer. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200830224311.36994-3-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: actions: pinctrl-owl: Constify owl_pinctrl_ops and owl_pinmux_opsRikard Falkeborn
The only usage of owl_pinctrl_ops and owl_pinmux_ops is to assign their addresses to the pctlops and the pmxops fields in the pinctrl_desc struct, which are const pointers. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200830224311.36994-2-rikard.falkeborn@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: mcp23s08: Fix mcp23x17 precious rangeThomas Preston
On page 23 of the datasheet [0] it says "The register remains unchanged until the interrupt is cleared via a read of INTCAP or GPIO." Include INTCAPA and INTCAPB registers in precious range, so that they aren't accidentally cleared when we read via debugfs. [0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200828213226.1734264-3-thomas.preston@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-12pinctrl: mcp23s08: Fix mcp23x17_regmap initialiserThomas Preston
The mcp23x17_regmap is initialised with structs named "mcp23x16". However, the mcp23s08 driver doesn't support the MCP23016 device yet, so this appears to be a typo. Fixes: 8f38910ba4f6 ("pinctrl: mcp23s08: switch to regmap caching") Signed-off-by: Thomas Preston <thomas.preston@codethink.co.uk> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200828213226.1734264-2-thomas.preston@codethink.co.uk Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-07pinctrl: cherryview: Preserve CHV_PADCTRL1_INVRXTX_TXDATA flag on GPIOsHans de Goede
One some devices the GPIO should output the inverted value from what device-drivers / ACPI code expects. The reason for this is unknown, perhaps these systems use an external buffer chip on the GPIO which inverts the signal. The BIOS makes this work by setting the CHV_PADCTRL1_INVRXTX_TXDATA flag. Before this commit we would unconditionally clear all INVRXTX flags, including the CHV_PADCTRL1_INVRXTX_TXDATA flag when a GPIO is requested by a driver (from chv_gpio_request_enable()). This breaks systems using this setup. Specifically it is causing problems for systems with a goodix touchscreen, where the BIOS sets the INVRXTX_TXDATA flag on the GPIO used for the touchscreen's reset pin. The goodix touchscreen driver by defaults configures this pin as input (relying on the pull-up to keep it high), but the clearing of the INVRXTX_TXDATA flag done by chv_gpio_request_enable() causes it to be driven low for a brief time before the GPIO gets set to input mode. This causes the touchscreen controller to get reset. On most CHT devs with this touchscreen this leads to: [ 31.596534] Goodix-TS i2c-GDIX1001:00: i2c test failed attempt 1: -121 The driver retries this though and then everything is fine. But during reset the touchscreen uses its interrupt pin as bootstrap to determine which i2c address to use and on the Acer One S1003 the spurious reset caused by the clearing of the INVRXTX_TXDATA flag causes the controller to come back up again on the wrong i2c address, breaking things. This commit fixes both the -121 errors, as well as the total breakage on the Acer One S1003, by making chv_gpio_clear_triggering() not clear the INVRXTX_TXDATA flag if the pin is already configured as a GPIO. Note that chv_pinmux_set_mux() does still unconditionally clear the flag, so this only affects GPIO usage. Fixes: a7d4b171660c ("Input: goodix - add support for getting IRQ + reset GPIOs on Cherry Trail devices") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2020-08-31pinctrl: sh-pfc: r8a7790: Add CAN pins, groups and functionsLad Prabhakar
Add pins, groups and functions for the CAN{0,1} interface. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Link: https://lore.kernel.org/r/20200825095448.13093-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-08-28pinctrl: mcp23s08: Improve error messaging in ->probe()Andy Shevchenko
Print particular message in each of error case in the ->probe(). While here, use dev_err_probe() for that. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828103235.78380-1-andriy.shevchenko@linux.intel.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27pinctrl: mediatek: Add pinctrl driver for mt8192Zhiyong Tao
This commit includes pinctrl driver for mt8192. Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Acked-by: Sean Wang <sean.wang@kernel.org> Link: https://lore.kernel.org/r/20200817001702.1646-4-zhiyong.tao@mediatek.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27pinctrl: actions: Add Actions S500 pinctrl driverCristian Ciocaltea
Add pinctrl and gpio driver for Actions Semi S500 SoC. The driver supports pinctrl, pinmux, pinconf, gpio and interrupt functions using a set of registers shared between gpio and pinctrl. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com> Link: https://lore.kernel.org/r/ce11c15f2f72798a8d740f8a7d5cbf1e6d70974a.1596461275.git.cristian.ciocaltea@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27pinctrl: qcom: Add msm8226 pinctrl driver.Bartosz Dudziak
Add initial Qualcomm msm8226 pinctrl driver to support pin configuration with pinctrl framework for msm8226 SoC. - Initial formatting and style was taken from the msm8x74 pinctrl driver added by Björn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl> Link: https://lore.kernel.org/r/20200716205530.22910-3-bartosz.dudziak@snejp.pl Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27pinctrl: armada-37xx: Add comment for pcie1_reset pin groupPali Rohár
Group name 'pcie1' is misleading as it controls only PCIe reset pin. Like other PCIe groups it should have been called 'pcie1_reset'. But due to backward compatibility it is not possible to change existing group name. So just add comment describing this PCIe reset functionality. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200724132457.7094-1-pali@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-27pinctrl: nomadik: Fix pull direction debug infoAndrew Halaney
The nomadik pinctrl hardware doesn't have any way to determine if the active pull is up or down. Reading the bit currently used to report if the pull is up/down indicates if the gpio input is reading high or low, it doesn't reflect the pull state. For this reason change the output from "pull up"/"pull down" to "pull enabled". This avoids confusing developers who were using the output to determine what the pull state is. Signed-off-by: Andrew Halaney <ajhalaney@gmail.com> Link: https://lore.kernel.org/r/20200806155322.GA25523@ola-jn9phv2.ad.garmin.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-08-20pinctrl: intel: Update header block to reflect direct dependenciesAndy Shevchenko
Update header inclusion block to reflect all direct dependencies that are being involved in pinctrl-intel.h. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-20pinctrl: cherryview: Switch to use intel_pinctrl_get_soc_data()Andy Shevchenko
Since we have common helper to retrieve SoC data from driver data we may switch to use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-20pinctrl: baytrail: Switch to use intel_pinctrl_get_soc_data()Andy Shevchenko
Since we have common helper to retrieve SoC data from driver data we may switch to use it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-18pinctrl: intel: Extract intel_pinctrl_get_soc_data() helper for wider useAndy Shevchenko
intel_pinctrl_get_soc_data() helper can be used in few driver instead of open-coded variants. Thus, extract it as a standalone API. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-18pinctrl: cherryview: Utilize temporary variable to hold device pointerAndy Shevchenko
By one of the previous clean up change we got a temporary variable to hold a device pointer. It can be utilized in other calls in the ->probe() and save a bit of LOCs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-18pinctrl: cherryview: Switch to use struct intel_pinctrlAndy Shevchenko
Now when all preparations are done we may easily switch to use struct intel_pinctrl instead of custom one. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2020-08-18pinctrl: cherryview: Move custom community members to separate data structAndy Shevchenko
This is a preparatory patch for bigger clean up pending for Cherryview driver. There is no functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-10 16:10:17 +0000