summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)Author
2011-04-11PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKSRafael J. Wysocki
Xen save/restore is going to use hibernate device callbacks for quiescing devices and putting them back to normal operations and it would need to select CONFIG_HIBERNATION for this purpose. However, that also would cause the hibernate interfaces for user space to be enabled, which might confuse user space, because the Xen kernels don't support hibernation. Moreover, it would be wasteful, as it would make the Xen kernels include a substantial amount of code that they would never use. To address this issue introduce new power management Kconfig option CONFIG_HIBERNATE_CALLBACKS, such that it will only select the code that is necessary for the hibernate device callbacks to work and make CONFIG_HIBERNATION select it. Then, Xen save/restore will be able to select CONFIG_HIBERNATE_CALLBACKS without dragging the entire hibernate code along with it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
2011-04-11pci: fix PCI bus allocation alignment handlingLinus Torvalds
In commit 13583b16592a ("PCI: refactor io size calculation code") Ram had a thinko in the refactorization of the code: the end result used the variable 'align' for the bus alignment, but the original code used 'min_align'. Since then, another use of that 'align' variable got introduced by commit c8adf9a3e873 ("PCI: pre-allocate additional resources to devices only after successful allocation of essential resources.") Fix both of those uses to use 'min_align' as they should. Daniel Hellstrom <daniel@gaisler.com> Acked-by: Ram Pai <linuxram@us.ibm.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-29drivers: Final irq namespace conversionThomas Gleixner
Scripted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-25Merge branch 'syscore' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: Introduce ARCH_NO_SYSDEV_OPS config option (v2) cpufreq: Use syscore_ops for boot CPU suspend/resume (v2) KVM: Use syscore_ops instead of sysdev class and sysdev PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev timekeeping: Use syscore_ops instead of sysdev class and sysdev x86: Use syscore_ops instead of sysdev classes and sysdevs
2011-03-25Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: Disable ASPM when _OSC control is not granted for PCIe services PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs PCI: PCIe links may not get configured for ASPM under POWERSAVE mode PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
2011-03-24Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (42 commits) ACPI: minor printk format change in acpi_pad ACPI: make acpi_pad /sys output more readable ACPICA: Update version to 20110316 ACPICA: Header support for SLIC table ACPI: Make sure the FADT is at least rev 2 before using the reset register ACPI: Bug compatibility for Windows on the ACPI reboot vector ACPICA: Fix access width for reset vector ACPI battery: fribble sysfs files from a resume notifier ACPI button: remove unused procfs I/F ACPI, APEI, Add PCIe AER error information printing support PCIe, AER, use pre-generated prefix in error information printing ACPI, APEI, Add ERST record ID cache ACPI: Use syscore_ops instead of sysdev class and sysdev ACPI: Remove the unused EC sysdev class ACPI: use __cpuinit for the acpi_processor_set_pdc() call tree ACPI: use __init where possible in processor driver Thermal_Framework-Fix_crash_during_hwmon_unregister ACPICA: Update version to 20110211. ACPICA: Add mechanism to defer _REG methods for some installed handlers ACPICA: Add support for FunctionalFixedHW in acpi_ut_get_region_name ...
2011-03-23userns: security: make capabilities relative to the user namespaceSerge E. Hallyn
- Introduce ns_capable to test for a capability in a non-default user namespace. - Teach cap_capable to handle capabilities in a non-default user namespace. The motivation is to get to the unprivileged creation of new namespaces. It looks like this gets us 90% of the way there, with only potential uid confusion issues left. I still need to handle getting all caps after creation but otherwise I think I have a good starter patch that achieves all of your goals. Changelog: 11/05/2010: [serge] add apparmor 12/14/2010: [serge] fix capabilities to created user namespaces Without this, if user serge creates a user_ns, he won't have capabilities to the user_ns he created. THis is because we were first checking whether his effective caps had the caps he needed and returning -EPERM if not, and THEN checking whether he was the creator. Reverse those checks. 12/16/2010: [serge] security_real_capable needs ns argument in !security case 01/11/2011: [serge] add task_ns_capable helper 01/11/2011: [serge] add nsown_capable() helper per Bastian Blank suggestion 02/16/2011: [serge] fix a logic bug: the root user is always creator of init_user_ns, but should not always have capabilities to it! Fix the check in cap_capable(). 02/21/2011: Add the required user_ns parameter to security_capable, fixing a compile failure. 02/23/2011: Convert some macros to functions as per akpm comments. Some couldn't be converted because we can't easily forward-declare them (they are inline if !SECURITY, extern if SECURITY). Add a current_user_ns function so we can use it in capability.h without #including cred.h. Move all forward declarations together to the top of the #ifdef __KERNEL__ section, and use kernel-doc format. 02/23/2011: Per dhowells, clean up comment in cap_capable(). 02/23/2011: Per akpm, remove unreachable 'return -EPERM' in cap_capable. (Original written and signed off by Eric; latest, modified version acked by him) [akpm@linux-foundation.org: fix build] [akpm@linux-foundation.org: export current_user_ns() for ecryptfs] [serge.hallyn@canonical.com: remove unneeded extra argument in selinux's task_has_capability] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Acked-by: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by: Daniel Lezcano <daniel.lezcano@free.fr> Acked-by: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Serge E. Hallyn <serge.hallyn@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-23PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdevRafael J. Wysocki
The Intel IOMMU subsystem uses a sysdev class and a sysdev for executing iommu_suspend() after interrupts have been turned off on the boot CPU (during system suspend) and for executing iommu_resume() before turning on interrupts on the boot CPU (during system resume). However, since both of these functions ignore their arguments, the entire mechanism may be replaced with a struct syscore_ops object which is simpler. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Joerg Roedel <joerg.roedel@amd.com>
2011-03-23Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/acpi/sleep.c Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-22Merge branch 'apei-release' into releaseLen Brown
2011-03-21ACPI, APEI, Add PCIe AER error information printing supportHuang Ying
The AER error information printing support is implemented in drivers/pci/pcie/aer/aer_print.c. So some string constants, functions and macros definitions can be re-used without being exported. The original PCIe AER error information printing function is not re-used directly because the overall format is quite different. And changing the original printing format may make some original users' scripts broken. Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-21PCIe, AER, use pre-generated prefix in error information printingHuang Ying
When printing PCIe AER error information, each line is prefixed with PCIe device and driver information. In original implementation, the prefix is generated when each line is printed. In fact, all lines share the same prefix. So this patch pre-generated the prefix, and use that one when each line is printed. In addition to common prefix can be pre-generated, the trailing white spaces in string constants and NULLs in char * array constants can be removed too. These can reduce the object file size further. The size of object file before and after changing is as follow: text data bss dec before: 3038 0 0 3038 after: 2118 0 0 2118 Signed-off-by: Huang Ying <ying.huang@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> CC: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2011-03-21PCI: Disable ASPM when _OSC control is not granted for PCIe servicesNaga Chumbalkar
v3 -> v2: Added text to describe the problem v2 -> v1: Split this patch from v1 v1 : Part of: http://marc.info/?l=linux-pci&m=130042212003242&w=2 Disable ASPM when no _OSC control for PCIe services is granted by the BIOS. This is to protect systems with a buggy BIOS that did not set the ACPI FADT "ASPM Controls" bit even though the underlying HW can't do ASPM. To turn "on" ASPM the minimum the BIOS needs to do: 1. Clear the ACPI FADT "ASPM Controls" bit. 2. Support _OSC appropriately There is no _OSC Control bit for ASPM. However, we expect the BIOS to support _OSC for a Root Bridge that originates a PCIe hierarchy. If this is not the case - we are better off not enabling ASPM on that server. Commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the Platform won't provide _OSC control for PCIe) describes the above scenario. To quote verbatim from there: [The PCI SIG documentation for the _OSC OS/firmware handshaking interface states: "If the _OSC control method is absent from the scope of a host bridge device, then the operating system must not enable or attempt to use any features defined in this section for the hierarchy originated by the host bridge." The obvious interpretation of this is that the OS should not attempt to use PCIe hotplug, PME or AER - however, the specification also notes that an _OSC method is *required* for PCIe hierarchies, and experimental validation with An Alternative OS indicates that it doesn't use any PCIe functionality if the _OSC method is missing. That arguably means we shouldn't be using MSI or extended config space, but right now our problems seem to be limited to vendors being surprised when ASPM gets enabled on machines when other OSs refuse to do so. So, for now, let's just disable ASPM if the _OSC method doesn't exist or refuses to hand over PCIe capability control.] Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIsNaga Chumbalkar
v3 -> v2: Modified the text that describes the problem v2 -> v1: Returned -EPERM v1 : http://marc.info/?l=linux-pci&m=130013194803727&w=2 For servers whose hardware cannot handle ASPM the BIOS ought to set the FADT bit shown below: In Sec 5.2.9.3 (IA-PC Boot Arch. Flags) of ACPI4.0a Specification, please see Table 5-11: PCIe ASPM Controls: If set, indicates to OSPM that it must not enable OPSM ASPM control on this platform. However there are shipping servers whose BIOS did not set this bit. (An example is the HP ProLiant DL385 G6. A Maintenance BIOS will fix that). For such servers even if a call is made via pci_no_aspm(), based on _OSC support in the BIOS, it may be too late because the ASPM code may have already allocated and filled its "link_list". So if a user sets the ASPM "policy" to "powersave" via /sys then pcie_aspm_set_policy() will run through the "link_list" and re-configure ASPM policy on devices that advertise ASPM L0s/L1 capability: # echo powersave > /sys/module/pcie_aspm/parameters/policy # cat /sys/module/pcie_aspm/parameters/policy default performance [powersave] That can cause NMIs since the hardware doesn't play well with ASPM: [ 1651.906015] NMI: PCI system error (SERR) for reason b1 on CPU 0. [ 1651.906015] Dazed and confused, but trying to continue Ideally, the BIOS should have set that FADT bit in the first place but we could be more robust - especially given the fact that Windows doesn't cause NMIs in the above scenario. There should be a sanity check to not allow a user to modify ASPM policy when aspm_disabled is set. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21PCI: PCIe links may not get configured for ASPM under POWERSAVE modeNaga Chumbalkar
v3 -> v2: Moved ASPM enabling logic to pci_set_power_state() v2 -> v1: Preserved the logic in pci_raw_set_power_state() : Added ASPM enabling logic after scanning Root Bridge : http://marc.info/?l=linux-pci&m=130046996216391&w=2 v1 : http://marc.info/?l=linux-pci&m=130013164703283&w=2 The assumption made in commit 41cd766b065970ff6f6c89dd1cf55fa706c84a3d (PCI: Don't enable aspm before drivers have had a chance to veto it) that pci_enable_device() will result in re-configuring ASPM when aspm_policy is POWERSAVE is no longer valid. This is due to commit 97c145f7c87453cec90e91238fba5fe2c1561b32 (PCI: read current power state at enable time) which resets dev->current_state to D0. Due to this the call to pcie_aspm_pm_state_change() is never made. Note the equality check (below) that returns early: ./drivers/pci/pci.c: pci_raw_set_pci_power_state() 546 /* Check if we're already there */ 547 if (dev->current_state == state) 548 return 0; Therefore OSPM never configures the PCIe links for ASPM to turn them "on". Fix it by configuring ASPM from the pci_enable_device() code path. This also allows a driver such as the e1000e networking driver a chance to disable ASPM (L0s, L1), if need be, prior to enabling the device. A driver may perform this action if the device is known to mis-behave wrt ASPM. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-21PCI/ACPI: Report ASPM support to BIOS if not disabled from command lineRafael J. Wysocki
We need to distinguish the situation in which ASPM support is disabled from the command line or through .config from the situation in which it is disabled, because the hardware or BIOS can't handle it. In the former case we should not report ASPM support to the BIOS through ACPI _OSC, but in the latter case we should do that. Introduce pcie_aspm_support_enabled() that can be used by acpi_pci_root_add() to determine whether or not it should report ASPM support to the BIOS through _OSC. Cc: stable@kernel.org References: https://bugzilla.kernel.org/show_bug.cgi?id=29722 References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-and-tested-by: Ortwin Glück <odi@odi.ch> Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-18Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: label: remove #include of ACPI header to avoid warnings PCI: label: Fix compilation error when CONFIG_ACPI is unset PCI: pre-allocate additional resources to devices only after successful allocation of essential resources. PCI: introduce reset_resource() PCI: data structure agnostic free list function PCI: refactor io size calculation code PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICH PCI hotplug: acpiphp: set current_state to D0 in register_slot PCI: Export ACPI _DSM provided firmware instance number and string name to sysfs PCI: add more checking to ICH region quirks PCI: aer-inject: Override PCIe AER Mask Registers PCI: fix tlan build when CONFIG_PCI is not enabled PCI: remove quirk for pre-production systems PCI: Avoid potential NULL pointer dereference in pci_scan_bridge PCI/lpc: irq and pci_ids patch for Intel DH89xxCC DeviceIDs PCI: sysfs: Fix failure path for addition of "vpd" attribute
2011-03-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: (40 commits) unicore32: rewrite arch-specific tlb.h to use asm-generic version unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs unicore32: replace unicore32-specific iomap functions with generic lib implementation unicore32 machine related: add frame buffer driver for pkunity-v3 soc unicore32 machine related files: add i2c bus drivers for pkunity-v3 soc unicore32 io: redefine __REG(x) and re-use readl/writel funcs unicore32 i8042 upgrade and bugfix: adjust resource request region type unicore32 upgrade to v2.6.38-rc5: add one more paramter for pte_alloc_map call unicore32 i8042: adjust io funcs of i8042-unicore32io.h unicore32: rename PKUNITY_IOSPACE_BASE to PKUNITY_MMIO_BASE unicore32: modify function names and parameters for irq_chips unicore32: remove unused lines in arch/unicore32/include/asm/irq.h unicore32 time.c: change calculate method for clock_event_device unicore32: ADD MAINTAINER for unicore32 architecture unicore32 machine related files: ps2 driver unicore32 machine related files: pci bus handling unicore32 machine related files: hardware registers unicore32 machine related files: core files unicore32 additional architecture files: boot process unicore32 additional architecture files: low-level lib: misc ... Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17unicore32 machine related files: pci bus handlingGuanXuetao
This patch implements arch-specific pci bus driver. Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-03-16PCI: label: remove #include of ACPI header to avoid warningsShyam_Iyer@Dell.com
I found that including acpi/apci_drivers.h is not necessary and introduces these warnings: In file included from drivers/pci/pci-label.c:32: include/acpi/acpi_drivers.h:103: warning: ‘struct acpi_device’ declared inside parameter list include/acpi/acpi_drivers.h:103: warning: its scope is only this definition or declaration, which is probably not what you want include/acpi/acpi_drivers.h:107: warning: ‘struct acpi_pci_root’ declared inside parameter list Signed-off-by: Shyam Iyer <shyam_iyer@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-16PCI: label: Fix compilation error when CONFIG_ACPI is unsetNarendra_K@Dell.com
This patch fixes compilation error descibed below introduced by the commit 6058989bad05b82e78baacce69ec14f27a11b5fd drivers/pci/pci-label.c: In function ‘pci_create_firmware_label_files’: drivers/pci/pci-label.c:366:2: error: implicit declaration of function ‘device_has_dsm’ Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (21 commits) PM / Hibernate: Reduce autotuned default image size PM / Core: Introduce struct syscore_ops for core subsystems PM PM QoS: Make pm_qos settings readable PM / OPP: opp_find_freq_exact() documentation fix PM: Documentation/power/states.txt: fix repetition PM: Make system-wide PM and runtime PM treat subsystems consistently PM: Simplify kernel/power/Kconfig PM: Add support for device power domains PM: Drop pm_flags that is not necessary PM: Allow pm_runtime_suspend() to succeed during system suspend PM: Clean up PM_TRACE dependencies and drop unnecessary Kconfig option PM: Remove CONFIG_PM_OPS PM: Reorder power management Kconfig options PM: Make CONFIG_PM depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME) PM / ACPI: Remove references to pm_flags from bus.c PM: Do not create wakeup sysfs files for devices that cannot wake up USB / Hub: Do not call device_set_wakeup_capable() under spinlock PM: Use appropriate printk() priority level in trace.c PM / Wakeup: Don't update events_check_enabled in pm_get_wakeup_count() PM / Wakeup: Make pm_save_wakeup_count() work as documented ...
2011-03-15PM: Remove CONFIG_PM_OPSRafael J. Wysocki
After redefining CONFIG_PM to depend on (CONFIG_PM_SLEEP || CONFIG_PM_RUNTIME) the CONFIG_PM_OPS option is redundant and can be replaced with CONFIG_PM. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-03-04PCI: pre-allocate additional resources to devices only after successful ↵Ram Pai
allocation of essential resources. Linux tries to pre-allocate minimal resources to hotplug bridges. This works fine as long as there are enough resources to satisfy all other genuine resource requirements. However if enough resources are not available to satisfy any of these nice-to-have pre-allocations, the resource-allocator reports errors and returns failure. This patch distinguishes between must-have resource from nice-to-have resource. Any failure to allocate nice-to-have resources are ignored. This behavior can be particularly useful to trigger automatic reallocation when the OS discovers genuine allocation-conflicts or genuine unallocated-requests caused by buggy allocation behavior of the native BIOS/uEFI. https://bugzilla.kernel.org/show_bug.cgi?id=15960 captures the movitation behind the patch. This patch is verified to resolve the above bug. changelog v2: o fixed a bug where pci_assign_resource() was called on a resource of zero resource size. changelog v3: addressed Bjorn's comment o "Please don't indent and right-justify the changelog". o removed add_size from struct resource. The additional size is now tracked using a linked list. changelog v4: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o moved freeing up of elements in head list from assign_requested_resources_sorted() to __assign_resources_sorted(). o removed a wrong reference to 'add_size' in pbus_size_mem(). o some code optimizations in adjust_resources_sorted() and assign_requested_resources_sorted() changelog v5: o factored out common code and made them into separate independent patches o added comments in kdoc format o added a BUG_ON in pci_assign_unassigned_resources() to catch for memory leak. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: introduce reset_resource()Ram Pai
Introduce reset_resource() which factors out resource reset logic. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: data structure agnostic free list functionRam Pai
Replace free_failed_list() with a free_list() call. free_list() can handle 'resource_list_x', 'resource_list' and any linked list linked through ->next Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: refactor io size calculation codeRam Pai
Refactor code that calculates the io size in pbus_size_io() and pbus_mem_io() into separate functions. Signed-off-by: Ram Pai <linuxram@us.ibm.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: do not create quirk I/O regions below PCIBIOS_MIN_IO for ICHJiri Slaby
Some broken BIOSes on ICH4 chipset report an ACPI region which is in conflict with legacy IDE ports when ACPI is disabled. Even though the regions overlap, IDE ports are working correctly (we cannot find out the decoding rules on chipsets). So the only problem is the reported region itself, if we don't reserve the region in the quirk everything works as expected. This patch avoids reserving any quirk regions below PCIBIOS_MIN_IO which is 0x1000. Some regions might be (and are by a fast google query) below this border, but the only difference is that they won't be reserved anymore. They should still work though the same as before. The conflicts look like (1f.0 is bridge, 1f.1 is IDE ctrl): pci 0000:00:1f.1: address space collision: [io 0x0170-0x0177] conflicts with 0000:00:1f.0 [io 0x0100-0x017f] At 0x0100 a 128 bytes long ACPI region is reported in the quirk for ICH4. ata_piix then fails to find disks because the IDE legacy ports are zeroed: ata_piix 0000:00:1f.1: device not available (can't reserve [io 0x0000-0x0007]) References: https://bugzilla.novell.com/show_bug.cgi?id=558740 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI hotplug: acpiphp: set current_state to D0 in register_slotStefano Stabellini
If a device doesn't support power management (pm_cap == 0) but it is acpi_pci_power_manageable() because there is a _PS0 method declared for it and _EJ0 is also declared for the slot then nobody is going to set current_state = PCI_D0 for this device. This is what I think it is happening: pci_enable_device | __pci_enable_device_flags /* here we do not set current_state because !pm_cap */ | do_pci_enable_device | pci_set_power_state | __pci_start_power_transition | pci_platform_power_transition /* platform_pci_power_manageable() calls acpi_pci_power_manageable that * returns true */ | platform_pci_set_power_state /* acpi_pci_set_power_state gets called and does nothing because the * acpi device has _EJ0, see the comment "If the ACPI device has _EJ0, * ignore the device" */ at this point if we refer to the commit message that introduced the comment above (10b3dcae0f275e2546e55303d64ddbb58cec7599), it is up to the hotplug driver to set the state to D0. However AFAICT the pci hotplug driver never does, in fact drivers/pci/hotplug/acpiphp_glue.c:register_slot sets the slot flags to (SLOT_ENABLED | SLOT_POWEREDON) but it does not set the pci device current state to PCI_D0. So my proposed fix is also to set current_state = PCI_D0 in register_slot. Comments are very welcome. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: Export ACPI _DSM provided firmware instance number and string name to sysfsNarendra_K@Dell.com
This patch exports ACPI _DSM (Device Specific Method) provided firmware instance number and string name of PCI devices as defined by 'PCI Firmware Specification Revision 3.1' section 4.6.7.( DSM for Naming a PCI or PCI Express Device Under Operating Systems) to sysfs. New files created are: /sys/bus/pci/devices/.../label which contains the firmware name for the device in question, and /sys/bus/pci/devices/.../acpi_index which contains the firmware device type instance for the given device. cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/acpi_index 1 cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/label Embedded Broadcom 5709C NIC 1 cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/acpi_index 2 cat /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.1/label Embedded Broadcom 5709C NIC 2 The ACPI _DSM provided firmware 'instance number' and 'string name' will be given priority if the firmware also provides 'SMBIOS type 41 device type instance and string'. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: add more checking to ICH region quirksJiri Slaby
Per ICH4 and ICH6 specs, ACPI and GPIO regions are valid iff ACPI_EN and GPIO_EN bits are set to 1. Add checks for these bits into the quirks prior to the region creation. While at it, name the constants by macros. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Renninger <trenn@suse.de> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-03-04PCI: aer-inject: Override PCIe AER Mask RegistersPrarit Bhargava
I have several systems which have the same problem: The PCIe AER corrected and uncorrected masks have all the error bits set. This results in the inablility to test with the aer_inject module & utility on those systems. Add the 'aer_mask_override' module parameter which will override the corrected or uncorrected masks for a PCI device. The mask will have the bit corresponding to the status passed into the aer_inject() function. After this patch it is possible to successfully use the aer_inject utility on those PCI slots. Successfully tested by me on a Dell and Intel whitebox which exhibited the mask problem. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-24ACPI: Remove the wakeup.run_wake_count device fieldRafael J. Wysocki
The wakeup.run_wake_count ACPI device field is only used by the PCI runtime PM code to "protect" devices from being prepared for generating wakeup signals more than once in a row. However, it really doesn't provide any protection, because (1) all of the functions it is supposed to protect use their own reference counters effectively ensuring that the device will be set up for generating wakeup signals just once and (2) the PCI runtime PM code uses wakeup.run_wake_count in a racy way, since nothing prevents acpi_dev_run_wake() from being called concurrently from two different threads for the same device. Remove the wakeup.run_wake_count ACPI device field which is unnecessary, confusing and used in a wrong way. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-02-18pci/xen: Cleanup: convert int** to int[]Konrad Rzeszutek Wilk
Cleanup code. Cosmetic change to make the code look easier to read. Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-18xen-pcifront: Sanity check the MSI/MSI-X valuesKonrad Rzeszutek Wilk
Check the returned vector values for any values that are odd or plain incorrect (say vector value zero), and if so print a warning. Also fixup the return values. This patch was precipiated by the Xen PCIBack returning the incorrect values due to how it was retrieving PIRQ values. This has been fixed in the xen-pciback by "xen/pciback: Utilize 'xen_pirq_from_irq' to get PIRQ value" patch. Reviewed-by: Ian Campbell <Ian.Campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-17xen-pcifront: don't use flush_scheduled_work()Tejun Heo
flush_scheduled_work() is scheduled for deprecation. Cancel ->op_work directly instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ryan Wilson <hap9@epoch.ncsc.mil> Cc: Jan Beulich <JBeulich@novell.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-16PCI: remove quirk for pre-production systemsBrandeburg, Jesse
Revert commit 7eb93b175d4de9438a4b0af3a94a112cb5266944 Author: Yu Zhao <yu.zhao@intel.com> Date: Fri Apr 3 15:18:11 2009 +0800 PCI: SR-IOV quirk for Intel 82576 NIC If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the old Flash Memory Space. Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet section 7.9.2.14.2 for details. http://download.intel.com/design/network/datashts/82576_Datasheet.pdf Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> This quirk was added before SR-IOV was in production and now all machines that originally had this issue alreayd have bios updates to correct the issue. The quirk itself is no longer needed and in fact causes bugs if run. Remove it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Yu Zhao <yu.zhao@intel.com> CC: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-15pci: use security_capable() when checking capablities during config space readChris Wright
This reintroduces commit 47970b1b which was subsequently reverted as f00eaeea. The original change was broken and caused X startup failures and generally made privileged processes incapable of reading device dependent config space. The normal capable() interface returns true on success, but the LSM interface returns 0 on success. This thinko is now fixed in this patch, and has been confirmed to work properly. So, once again...Eric Paris noted that commit de139a3 ("pci: check caps from sysfs file open to read device dependent config space") caused the capability check to bypass security modules and potentially auditing. Rectify this by calling security_capable() when checking the open file's capabilities for config space reads. Reported-by: Eric Paris <eparis@redhat.com> Tested-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: James Morris <jmorris@namei.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Alex Riesen <raa.lkml@gmail.com> Cc: Sedat Dilek <sedat.dilek@googlemail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: James Morris <jmorris@namei.org>
2011-02-13Revert "pci: use security_capable() when checking capablities during config ↵Linus Torvalds
space read" This reverts commit 47970b1b2aa64464bc0a9543e86361a622ae7c03. It turns out it breaks several distributions. Looks like the stricter selinux checks fail due to selinux policies not being set to allow the access - breaking X, but also lspci. So while the change was clearly the RightThing(tm) to do in theory, in practice we have backwards compatibility issues making it not work. Reported-by: Dave Young <hidave.darkstar@gmail.com> Acked-by: David Airlie <airlied@linux.ie> Acked-by: Alex Riesen <raa.lkml@gmail.com> Cc: Eric Paris <eparis@redhat.com> Cc: Chris Wright <chrisw@sous-sol.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-11pci: use security_capable() when checking capablities during config space readChris Wright
Eric Paris noted that commit de139a3 ("pci: check caps from sysfs file open to read device dependent config space") caused the capability check to bypass security modules and potentially auditing. Rectify this by calling security_capable() when checking the open file's capabilities for config space reads. Reported-by: Eric Paris <eparis@redhat.com> Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: James Morris <jmorris@namei.org>
2011-02-08PCI: Avoid potential NULL pointer dereference in pci_scan_bridgeJesper Juhl
pci_add_new_bus() calls pci_alloc_child_bus() which calls pci_alloc_bus() that allocates memory dynamically with kzalloc(). The return value of kzalloc() is the pointer that's eventually returned from pci_add_new_bus(), so since kzalloc() can fail and return NULL so can pci_add_new_bus(). Thus we may end up dereferencing a NULL pointer in drivers/pci/probe.c::pci_scan_bridge(). Seems to me we should test for this and bail out if it happens rather than crashing. Also removed some trailing whitespace that bugged me while looking at this. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-02-08PCI: sysfs: Fix failure path for addition of "vpd" attributeBen Hutchings
Commit 280c73d ("PCI: centralize the capabilities code in pci-sysfs.c") changed the initialisation of the "rom" and "vpd" attributes, and made the failure path for the "vpd" attribute incorrect. We must free the new attribute structure (attr), but instead we currently free dev->vpd->attr. That will normally be NULL, resulting in a memory leak, but it might be a stale pointer, resulting in a double-free. Found by inspection; compile-tested only. Cc: stable@kernel.org Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-20kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-14Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Report wakeup events before resuming devices PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events PCI: sysfs: Update ROM to include default owner write access x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available PCI/ACPI: Request _OSC control once for each root bridge (v3) PCI: enable pci=bfsort by default on future Dell systems PCI/PCIe: Clear Root PME Status bits early during system resume PCI: pci-stub: ignore zero-length id parameters x86/PCI: irq and pci_ids patch for Intel Patsburg PCI: Skip id checking if no id is passed PCI: fix __pci_device_probe kernel-doc warning PCI: make pci_restore_state return void PCI: Disable ASPM if BIOS asks us to PCI: Add mask bit definition for MSI-X table PCI: MSI: Move MSI-X entry definition to pci_regs.h Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the meantime been converted to not use legacy PCI power management, and thus no longer use pci_restore_state() at all (and that caused trivial conflicts with the "make pci_restore_state return void" patch)
2011-01-14PCI/PM: Report wakeup events before resuming devicesRafael J. Wysocki
Make wakeup events be reported by the PCI subsystem before attempting to resume devices or queuing up runtime resume requests for them, because wakeup events should be reported as soon as they have been detected. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14PCI/PM: Use pm_wakeup_event() directly for reporting wakeup eventsRafael J. Wysocki
After recent changes related to wakeup events pm_wakeup_event() automatically checks if the given device is configured to signal wakeup, so pci_wakeup_event() may be a static inline function calling pm_wakeup_event() directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14PCI: sysfs: Update ROM to include default owner write accessAlex Williamson
The PCI sysfs ROM interface requires an enabling write to access the ROM image, but the default file mode is 0400. The original proposed patch adding sysfs ROM support was a true read-only interface, with the enabling bit coming in as a feature request. I suspect it was simply an oversight that the file mode didn't get updated to match the API. Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14PCI/ACPI: Request _OSC control once for each root bridge (v3)Rafael J. Wysocki
Move the evaluation of acpi_pci_osc_control_set() (to request control of PCI Express native features) into acpi_pci_root_add() to avoid calling it many times for the same root complex with the same arguments. Additionally, check if all of the requisite _OSC support bits are set before calling acpi_pci_osc_control_set() for a given root complex. References: https://bugzilla.kernel.org/show_bug.cgi?id=20232 Reported-by: Ozan Caglayan <ozan@pardus.org.tr> Tested-by: Ozan Caglayan <ozan@pardus.org.tr> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-12Merge branch 'stable/xenbus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xenbus' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/xenbus: making backend support modular is too complex xen/pci: Make xen-pcifront be dependent on XEN_XENBUS_FRONTEND xen/xenbus: fixup checkpatch issues in xenbus_probe* xen/netfront: select XEN_XENBUS_FRONTEND xen/xenbus: clean up noise in xenbus_probe_frontend.c xen/xenbus: clean up noise in xenbus_probe_backend.c xen/xenbus: clean up noise in xenbus_probe.c xen/xenbus: cleanup debug noise in xenbus_comms.c xen/xenbus: clean up error handling xen/xenbus: make frontend bus GPL xen/xenbus: make sure backend bus is registered earlier xenbus/frontend: register bus earlier xen: remove xen/evtchn.h xen: add backend driver support xen: separate out frontend xenbus