summaryrefslogtreecommitdiffstats
path: root/drivers/pci
AgeCommit message (Collapse)Author
2010-09-28Merge branch 'meego-7093' into idle-releaseLen Brown
2010-09-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: fix pci_resource_alignment prototype
2010-09-27Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/a intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space
2010-09-24intel_idle: PCI quirk to prevent Lenovo Ideapad s10-3 boot hangLen Brown
When the Lenovo Ideapad S10-3 is booted with HT enabled, it hits a boot hang in the intel_idle driver. This occurs when entering ATM-C4 for the first time, unless BM_STS is first cleared. acpi_idle doesn't see this because it first checks and clears BM_STS, but it would hit the same hang if that check were disabled. http://bugs.meego.com/show_bug.cgi?id=7093 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/634702 Signed-off-by: Len Brown <len.brown@intel.com>
2010-09-22drivers/pci/intel-iommu.c: fix build with older gcc'sAndrew Morton
drivers/pci/intel-iommu.c: In function `__iommu_calculate_agaw': drivers/pci/intel-iommu.c:437: sorry, unimplemented: inlining failed in call to 'width_to_agaw': function body not available drivers/pci/intel-iommu.c:445: sorry, unimplemented: called from here Move the offending function (and its siblings) to top-of-file, remove the forward declaration. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=17441 Reported-by: Martin Mokrejs <mmokrejs@ribosome.natur.cuni.cz> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-09-21intel-iommu: Use symbolic values instead of magic numbers in Lenovo w/aAdam Jackson
Commit 9eecabcb9a924f1e11ba670365fd4babe423045c ("intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT space") uses a bunch of magic numbers. Provide #defines for those to make it look slightly saner. Signed-off-by: Adam Jackson <ajax@redhat.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-21intel-iommu: Abort IOMMU setup for igfx if BIOS gave no shadow GTT spaceDavid Woodhouse
Yet another BIOS bug; Lenovo this time (X201). Red Hat bug #593516. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-09-09PCI: fix pci_resource_alignment prototypeCam Macdonell
This fixes the prototype for both pci_resource_alignment() and pci_sriov_resource_alignment(). Patch started as debugging effort from Cam Macdonell. Cc: Cam Macdonell <cam@cs.ualberta.ca> Cc: Avi Kivity <avi@redhat.com> [chrisw: add iov bits] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-09-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: bus speed strings should be const PCI hotplug: Fix build with CONFIG_ACPI unset PCI: PCIe: Remove the port driver module exit routine PCI: PCIe: Move PCIe PME code to the pcie directory PCI: PCIe: Disable PCIe port services during port initialization PCI: PCIe: Ask BIOS for control of all native services at once ACPI/PCI: Negotiate _OSC control bits before requesting them ACPI/PCI: Do not preserve _OSC control bits returned by a query ACPI/PCI: Make acpi_pci_query_osc() return control bits ACPI/PCI: Reorder checks in acpi_pci_osc_control_set() PCI: PCIe: Introduce commad line switch for disabling port services PCI: PCIe AER: Introduce pci_aer_available() x86/PCI: only define pci_domain_nr if PCI and PCI_DOMAINS are set PCI: provide stub pci_domain_nr function for !CONFIG_PCI configs
2010-08-31PCI: bus speed strings should be constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-25PCI hotplug: Fix build with CONFIG_ACPI unsetRafael J. Wysocki
One of the recent changes caused complilation of drivers/pci/hotplug/pciehp_core.c to fail. Fix this issue. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24PCI: PCIe: Remove the port driver module exit routineKenji Kaneshige
The PCIe port driver's module exit routine is never used, so drop it. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24PCI: PCIe: Move PCIe PME code to the pcie directoryRafael J. Wysocki
The PCIe PME code only consists of one file, so it doesn't need to occupy its own directory. Move it to drivers/pci/pcie/pme.c and remove the contents of drivers/pci/pcie/pme . Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24PCI: PCIe: Disable PCIe port services during port initializationRafael J. Wysocki
In principle PCIe port services may be enabled by the BIOS, so it's better to disable them during port initialization to avoid spurious events from being generated. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Reviewed-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24PCI: PCIe: Ask BIOS for control of all native services at onceRafael J. Wysocki
After commit 852972acff8f10f3a15679be2059bb94916cba5d (ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe) control of the PCIe Capability Structure is unconditionally requested by acpi_pci_root_add(), which in principle may cause problems to happen in two ways. First, the BIOS may refuse to give control of the PCIe Capability Structure if it is not asked for any of the _OSC features depending on it at the same time. Second, the BIOS may assume that control of the _OSC features depending on the PCIe Capability Structure will be requested in the future and may behave incorrectly if that doesn't happen. For this reason, control of the PCIe Capability Structure should always be requested along with control of any other _OSC features that may depend on it (ie. PCIe native PME, PCIe native hot-plug, PCIe AER). Rework the PCIe port driver so that (1) it checks which native PCIe port services can be enabled, according to the BIOS, and (2) it requests control of all these services simultaneously. In particular, this causes pcie_portdrv_probe() to fail if the BIOS refuses to grant control of the PCIe Capability Structure, which means that no native PCIe port services can be enabled for the PCIe Root Complex the given port belongs to. If that happens, ASPM is disabled to avoid problems with mishandling it by the part of the PCIe hierarchy for which control of the PCIe Capability Structure has not been received. Make it possible to override this behavior using 'pcie_ports=native' (use the PCIe native services regardless of the BIOS response to the control request), or 'pcie_ports=compat' (do not use the PCIe native services at all). Accordingly, rework the existing PCIe port service drivers so that they don't request control of the services directly. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24ACPI/PCI: Negotiate _OSC control bits before requesting them Rafael J. Wysocki
It is possible that the BIOS will not grant control of all _OSC features requested via acpi_pci_osc_control_set(), so it is recommended to negotiate the final set of _OSC features with the query flag set before calling _OSC to request control of these features. To implement it, rework acpi_pci_osc_control_set() so that the caller can specify the mask of _OSC control bits to negotiate and the mask of _OSC control bits that are absolutely necessary to it. Then, acpi_pci_osc_control_set() will run _OSC queries in a loop until the mask of _OSC control bits returned by the BIOS is equal to the mask passed to it. Also, before running the _OSC request acpi_pci_osc_control_set() will check if the caller's required control bits are present in the final mask. Using this mechanism we will be able to avoid situations in which the BIOS doesn't grant control of certain _OSC features, because they depend on some other _OSC features that have not been requested. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24PCI: PCIe: Introduce commad line switch for disabling port servicesRafael J. Wysocki
Introduce kernel command line switch pcie_ports= allowing one to disable all of the native PCIe port services, so that PCIe ports are treated like PCI-to-PCI bridges. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-24PCI: PCIe AER: Introduce pci_aer_available()Rafael J. Wysocki
Introduce a function allowing the caller to check whether to try to enable PCIe AER. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-15Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Fix 32-bit build warning with __cmpxchg() intr-remap: allow disabling source id checking
2010-08-09Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (30 commits) DMAENGINE: at_hdmac: locking fixlet DMAENGINE: pch_dma: kill another usage of __raw_{read|write}l dma: dmatest: fix potential sign bug ioat2: catch and recover from broken vtd configurations v6 DMAENGINE: add runtime slave control to COH 901 318 v3 DMAENGINE: add runtime slave config to DMA40 v3 DMAENGINE: generic slave channel control v3 dmaengine: Driver for Topcliff PCH DMA controller intel_mid: Add Mrst & Mfld DMA Drivers drivers/dma: Eliminate a NULL pointer dereference dma/timb_dma: compile warning on 32 bit DMAENGINE: ste_dma40: support older silicon DMAENGINE: ste_dma40: support disabling physical channels DMAENGINE: ste_dma40: no disabled phy channels on ux500 DMAENGINE: ste_dma40: fix suspend bug DMAENGINE: ste_dma40: add DB8500 memcpy channels DMAENGINE: ste_dma40: no flow control on memcpy DMAENGINE: ste_dma40: arch updates for LCLA and LCPA DMAENGINE: ste_dma40: allocate LCLA dynamically DMAENGINE: ste_dma40: no premature stop ... Fix up trivial conflicts in arch/arm/mach-ux500/devices-db8500.c
2010-08-10intel-iommu: Fix 32-bit build warning with __cmpxchg()David Woodhouse
drivers/pci/intel-iommu.c: In function 'dma_pte_addr': drivers/pci/intel-iommu.c:239: warning: passing argument 1 of '__cmpxchg64' from incompatible pointer type It seems that __cmpxchg64() now cares about the type of its pointer argument, so give it a (uint64_t *) instead of a pointer to a structure which contains only that. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-10intr-remap: allow disabling source id checkingChris Wright
Allow disabling the source id checking while programming the interrupt remap table entry. Useful for debugging or working around the broken source id checks on some platforms. Signed-off-by: Chris Wright <chrisw@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-07Merge branch 'acpica' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'acpica' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI / ACPICA: Simplify acpi_ev_initialize_gpe_block() ACPI / ACPICA: Fail acpi_gpe_wakeup() if ACPI_GPE_CAN_WAKE is unset ACPI / ACPICA: Do not execute _PRW methods during initialization ACPI: Fix bogus GPE test in acpi_bus_set_run_wake_flags() ACPICA: Update version to 20100702 ACPICA: Fix for Alias references within Package objects ACPICA: Fix lint warning for 64-bit constant ACPICA: Remove obsolete GPE function ACPICA: Update debug output components ACPICA: Add support for WDDT - Watchdog Descriptor Table ACPICA: Drop acpi_set_gpe ACPICA: Use low-level GPE enable during GPE block initialization ACPI / EC: Do not use acpi_set_gpe ACPI / EC: Drop suspend and resume routines ACPICA: Remove wakeup GPE reference counting which is not used ACPICA: Introduce acpi_gpe_wakeup() ACPICA: Rename acpi_hw_gpe_register_bit ACPICA: Update version to 20100528 ACPICA: Add signatures for undefined tables: ATKG, GSCI, IEIT ACPICA: Optimization: Reduce the number of namespace walks ...
2010-08-06Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (30 commits) PCI: update for owner removal from struct device_attribute PCI: Fix warnings when CONFIG_DMI unset PCI: Do not run NVidia quirks related to MSI with MSI disabled x86/PCI: use for_each_pci_dev() PCI: use for_each_pci_dev() PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc() PCI: export SMBIOS provided firmware instance and label to sysfs PCI: Allow read/write access to sysfs I/O port resources x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLAN PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY} PCI: disable mmio during bar sizing PCI: MSI: Remove unsafe and unnecessary hardware access PCI: Default PCIe ASPM control to on and require !EMBEDDED to disable PCI: kernel oops on access to pci proc file while hot-removal PCI: pci-sysfs: remove casts from void* ACPI: Disable ASPM if the platform won't provide _OSC control for PCIe PCI hotplug: make sure child bridges are enabled at hotplug time PCI hotplug: shpchp: Removed check for hotplug of display devices PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_device PCI: Don't enable aspm before drivers have had a chance to veto it ...
2010-08-06pci: fix type warnings in intr_remapping.cLinus Torvalds
Commit 69309a059075 ("x86, asm: Clean up and simplify set_64bit()") sanitized the x86-64 types to set_64bit(), and incidentally resulted in warnings like drivers/pci/intr_remapping.c: In function 'modify_irte': drivers/pci/intr_remapping.c:314: warning: passing argument 1 of 'set_64bit' from incompatible pointer type arch/x86/include/asm/cmpxchg_64.h:6: note:expected 'volatile u64 *' but argument is of type 'long unsigned int *' It turns out that the change to set_64bit() really does clean up things, and the PCI intr_remapping.c file did a rather ugly cast in order to avoid warnings with the previous set_64bit() type model. Removing the ugly cast fixes the warning, and makes everybody happy and expects a set_64bit() to take the logical "u64 *" argument. Pointed-out-by: Peter Anvin <hpa@zytor.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-06Merge branch 'core-iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/amd-iommu: Export cache-coherency capability iommu-api: Extension to check for interrupt remapping x86/amd-iommu: Use for_each_pci_dev()
2010-08-06Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_fsl,mv,nv: prepare for NCQ command completion update ata: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used) libata: more PCI IDs for jmicron controllers ata_piix: fix locking around SIDPR access [libata] update blacklist for new hyphenated pattern ranges (v2) libata: allow hyphenated pattern ranges ata_generic: drop hard coded DMA force logic for CENATEK [libata] ahci: Fix warning: comparison between 'enum <anonymous>' and 'enum <anonymous>' [libata] add ATA_CMD_DSM to ata_get_cmd_descript [libata] Add Samsung PATA controller driver, pata_samsung_cf [libata] Add 460EX on-chip SATA driver, sata_dwc_460ex libata: reduce blacklist size even more (v2) libata: reduce blacklist size (v2) libata: glob_match for ata_device_blacklist (v2) ahci_platform: Remove unneeded ahci_driver.probe assignment ahci_platform: Provide for vendor specific init
2010-08-04PCI: update for owner removal from struct device_attributeStephen Rothwell
Fixes the build. Acked-by: Guenter Roeck <guenter.roeck@ericsson.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-04ioat2: catch and recover from broken vtd configurations v6Dan Williams
On some platforms (MacPro3,1) the BIOS assigns the ioatdma device to the incorrect iommu causing faults when the driver initializes. Add a quirk to catch this misconfiguration and try falling back to untranslated operation (which works in the MacPro3,1 case). Assuming there are other platforms with misconfigured iommus teach the ioatdma driver to treat initialization failures as non-fatal (just fail the driver load and emit a warning instead of triggering a BUG_ON). This can be classified as a boot regression since 2.6.32 on affected platforms since the ioatdma module did not autoload prior to that kernel. Cc: <stable@kernel.org> Acked-by: David Woodhouse <David.Woodhouse@intel.com> Reported-by: Chris Li <lkml@chrisli.org> Tested-by: Chris Li <lkml@chrisli.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-08-02PCI: Fix warnings when CONFIG_DMI unsetNarendra K
This patch fixes the below warnings introduced by the commit 911e1c9b05a8e3559a7aa89083930700a0b9e7ee ("PCI: export SMBIOS provided firmware instance and label to sysfs"). drivers/pci/pci.h: In function ‘pci_create_firmware_label_files’: drivers/pci/pci.h:16: warning: ‘return’ with a value, in function returning void drivers/pci/pci.h: In function ‘pci_remove_firmware_label_files’: drivers/pci/pci.h:18: warning: ‘return’ with a value, in function returning void The warnings are seen because of the below code, doing a retun 0 from the functions 'pci_create_firmware_label_files' and 'pci_remove_firmware_label_files' defined as void. +#ifndef CONFIG_DMI +static inline void pci_create_firmware_label_files(struct pci_dev *pdev) +{ return 0; } +static inline void pci_remove_firmware_label_files(struct pci_dev *pdev) +{ return 0; } Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-08-01libata: more PCI IDs for jmicron controllersTejun Heo
Add support for JMB364 and 369. Patch-originally-from: Aries Lee <arieslee@jmicron.com> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-07-30PCI: Do not run NVidia quirks related to MSI with MSI disabledRafael J. Wysocki
There is no reason to run NVidia-specific quirks related to HT MSI mappings with MSI disabled via pci=nomsi, so make __nv_msi_ht_cap_quirk() return immediately in that case. This allows at least one machine to boot 100% of the time with pci=nomsi (it still doesn't boot reliably without that). Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16443 . Cc: stable@kernel.org Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: use for_each_pci_dev()Kulikov Vasiliy
Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: MSI: Restore read_msi_msg_desc(); add get_cached_msi_msg_desc()Ben Hutchings
commit 2ca1af9aa3285c6a5f103ed31ad09f7399fc65d7 "PCI: MSI: Remove unsafe and unnecessary hardware access" changed read_msi_msg_desc() to return the last MSI message written instead of reading it from the device, since it may be called while the device is in a reduced power state. However, the pSeries platform code really does need to read messages from the device, since they are initially written by firmware. Therefore: - Restore the previous behaviour of read_msi_msg_desc() - Add new functions get_cached_msi_msg{,_desc}() which return the last MSI message written - Use the new functions where appropriate Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: export SMBIOS provided firmware instance and label to sysfsNarendra K
This patch exports SMBIOS provided firmware instance and label of onboard PCI devices to sysfs. New files are: /sys/bus/pci/devices/.../label which contains the firmware name for the device in question, and /sys/bus/pci/devices/.../index which contains the firmware device type instance for the given device. Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: Allow read/write access to sysfs I/O port resourcesAlex Williamson
PCI sysfs resource files currently only allow mmap'ing. On x86 this works fine for memory backed BARs, but doesn't work at all for I/O port backed BARs. Add read/write to I/O port PCI sysfs resource files to allow userspace access to these device regions. Acked-by: Chris Wright <chrisw@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: remove unused HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_{SIZE|BOUNDARY}FUJITA Tomonori
In 2.6.34, we transformed the PCI DMA API into the generic device mode. The PCI DMA API is just the wrapper of the DMA API. So we don't need HAVE_ARCH_PCI_SET_DMA_MAX_SEGMENT_SIZE or HAVE_ARCH_PCI_SET_DMA_SEGMENT_BOUNDARY (which enable architectures to have the own implementations). Both haven't been used anyway. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: disable mmio during bar sizingJacob Pan
It is a known issue that mmio decoding shall be disabled while doing PCI bar sizing. Host bridge and other devices (PCI PIC) shall be excluded for certain platforms. This patch mainly comes from Mathew Willcox's patch in http://kerneltrap.org/mailarchive/linux-kernel/2007/9/13/258969. A new flag bit "mmio_alway_on" is added to pci_dev with the intention that devices with their mmio decoding cannot be disabled during BAR sizing shall have this bit set, preferrablly in their quirks. Without this patch, Intel Moorestown platform graphics unit will be corrupted during bar sizing activities. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: MSI: Remove unsafe and unnecessary hardware accessBen Hutchings
During suspend on an SMP system, {read,write}_msi_msg_desc() may be called to mask and unmask interrupts on a device that is already in a reduced power state. At this point memory-mapped registers including MSI-X tables are not accessible, and config space may not be fully functional either. While a device is in a reduced power state its interrupts are effectively masked and its MSI(-X) state will be restored when it is brought back to D0. Therefore these functions can simply read and write msi_desc::msg for devices not in D0. Further, read_msi_msg_desc() should only ever be used to update a previously written message, so it can always read msi_desc::msg and never needs to touch the hardware. Tested-by: "Michael Chan" <mchan@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: Default PCIe ASPM control to on and require !EMBEDDED to disableMatthew Garrett
The CONFIG_PCIEASPM option is confusing and potentially dangerous. ASPM is a hardware mediated feature rather than one under direct OS control, and even if the config option is disabled the system firmware may have turned on ASPM on various bits of hardware. This can cause problems later - various hardware that claims to support ASPM does a poor job of it and may hang or cause other difficulties. The kernel is able to recognise this in many cases and disable the ASPM functionality, but only if CONFIG_PCIEASPM is enabled. Given that in its default configuration this option will either leave the hardware as it was originally or disable hardware functionality that may cause problems, it should by default y. The only reason to disable it ought to be to reduce code size, so make it dependent on CONFIG_EMBEDDED. Signed-off-by: Matthew Garrett <mjg@redhat.com> Cc: lrodriguez@atheros.com Cc: maximlevitsky@gmail.com Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: kernel oops on access to pci proc file while hot-removalKenji Kaneshige
I encountered the problem that /proc/bus/pci/XX/YY is not removed even after the corresponding device is hot-removed, if the file is still being opened. In addtion, accessing this file in this situation causes kernel panic (see below). Becasue the pci_proc_detach_device() doesn't call remove_proc_entry() if struct proc_dir_entry->count > 1, access to /proc/bus/pci/XX/YY would refer to struct pci_dev that was already freed. Though I don't know why the check for proc_dir_entry->count was added, I don't think it is needed. Removing this check fixes the problem. Steps to reproduce ------------------ # cd /sys/bus/pci/slots/2/ # PROC_BUS_PCI_FILE=/proc/bus/pci/`awk -F: '{print $2"/"$3}' < address`.0 # sleep 10000 < $PROC_BUS_PCI_FILE & # echo 0 > power # while true; do cat $PROC_BUS_PCI_FILE > /dev/null; done Oops Messages ------------- BUG: unable to handle kernel NULL pointer dereference at 00000042 IP: [<c05c82d5>] pci_user_read_config_dword+0x65/0xa0 *pdpt = 000000002185e001 *pde = 0000000476a79067 Oops: 0000 [#1] SMP last sysfs file: /sys/devices/pci0000:00/0000:00:1c.0/0000:10:00.0/local_cpus Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq ipv6 dm_mirror dm_region_hash dm_log dm_mod e1000e i2c_i801 i2c_core iTCO_wdt igb sg pcspkr dca iTCO_vendor_support ext4 mbcache jbd2 sd_mod crc_t10dif lpfc mptsas scsi_transport_fc mptscsih mptbase scsi_tgt scsi_transport_sas [last unloaded: microcode] Pid: 2997, comm: cat Not tainted 2.6.34-kk #32 SB/PRIMEQUEST 1800E EIP: 0060:[<c05c82d5>] EFLAGS: 00010046 CPU: 19 EIP is at pci_user_read_config_dword+0x65/0xa0 EAX: 00000002 EBX: e44f1800 ECX: e144df14 EDX: 155668c7 ESI: 00000087 EDI: 00000000 EBP: e144df40 ESP: e144df0c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Process cat (pid: 2997, ti=e144c000 task=e26f2570 task.ti=e144c000) Stack: c09ceac0 c0570f72 ffffffff 08c57000 00000000 00001000 e44f1800 c05d2404 <0> e144df40 00001000 00000000 00001000 08c57000 3093ae50 e420cb40 e358d5c0 <0> c05d2300 fffffffb c054984f e144df9c 00008000 08c57000 e358d5c0 00008000 Call Trace: [<c0570f72>] ? security_capable+0x22/0x30 [<c05d2404>] ? proc_bus_pci_read+0x104/0x220 [<c05d2300>] ? proc_bus_pci_read+0x0/0x220 [<c054984f>] ? proc_reg_read+0x5f/0x90 [<c05497f0>] ? proc_reg_read+0x0/0x90 [<c050694d>] ? vfs_read+0x9d/0x190 [<c04958f4>] ? audit_syscall_entry+0x204/0x230 [<c0506a81>] ? sys_read+0x41/0x70 [<c0402f1f>] ? sysenter_do_call+0x12/0x28 Code: b4 26 00 00 00 00 b8 20 88 b1 c0 c7 44 24 08 ff ff ff ff e8 3e 52 22 00 f6 83 24 04 00 00 20 75 34 8b 43 08 8d 4c 24 08 8b 53 1c <8b> 70 40 89 4c 24 04 89 f9 c7 04 24 04 00 00 00 ff 16 89 c6 f0 EIP: [<c05c82d5>] pci_user_read_config_dword+0x65/0xa0 SS:ESP 0068:e144df0c CR2: 0000000000000042 Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: pci-sysfs: remove casts from void*Kulikov Vasiliy
Remove unnesessary casts from void*. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI hotplug: make sure child bridges are enabled at hotplug timeYinghai Lu
Found one PCIe Module with several bridges built-in where a "cold" hotadd doesn't work. If we end up reassigning bridge windows at hotadd time, and have to loop through assigning new ranges, we won't end up enabling the child bridges because the first assignment pass already tried to enable them, which prevents __pci_bridge_assign_resource from updating the windows. So try to move enabling of child bridges to the end, and only do it once. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI hotplug: shpchp: Removed check for hotplug of display devicesPraveen Kalamegham
Removed check to prevent hotplug of display devices within shpchp. Originally this was thought to have been required within the PCI Hotplug specification for some legacy devices. However there is no such requirement in the most recent revision. The check prevents hotplug of not only display devices but also computational GPUs which require serviceability. Signed-off-by: Praveen Kalamegham <praveen@nextio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI hotplug: pciehp: Fixed return value sign for pciehp_unconfigure_devicePraveen Kalamegham
pciehp_unconfigure_device() should return -EINVAL, not EINVAL. Signed-off-by: Praveen Kalamegham <praveen@nextio.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: Don't enable aspm before drivers have had a chance to veto itMatthew Garrett
The aspm code will currently set the configured aspm policy before drivers have had an opportunity to indicate that their hardware doesn't support it. Unfortunately, putting some hardware in L0 or L1 can result in the hardware no longer responding to any requests, even after aspm is disabled. It makes more sense to leave aspm policy at the BIOS defaults at initial setup time, reconfiguring it after pci_enable_device() is called. This allows the driver to blacklist individual devices beforehand. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: fix wrong memory address handling in MSI-XKenji Kaneshige
Use resource_size_t for MMIO address instead of unsigned long. Otherwise, higher 32-bits of MMIO address are cleared unexpectedly in x86-32 PAE. Acked-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: check return value of pci_enable_device() when enabling bridgesJunchang Wang
pci_enable_device can fail. In that case, a printed warning would be more appropriate. Signed-off-by: Justin P. Mattock <justinmattock@gmail.com> Signed-off-by: Junchang Wang <junchangwang@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: sparse warning (trivial)Stephen Hemminger
Assigning zero where NULL should be used. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30PCI: disable MSI on VIA K8M800Tejun Heo
MSI delivery from on-board ahci controller doesn't work on K8M800. At this point, it's unclear whether the culprit is with the ahci controller or the host bridge. Given the track record and considering the rather minimal impact of MSI, disabling it seems reasonable. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Rainer Hurtado Navarro <publio.escipion.el.africano@gmail.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>