summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/rsi
AgeCommit message (Collapse)Author
2020-11-24rsi: fix error return code in rsi_reset_card()Zhang Changzhong
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 17ff2c794f39 ("rsi: reset device changes for 9116") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1605582454-39649-1-git-send-email-zhangchangzhong@huawei.com
2020-11-10rsi: Clean up loop in the interrupt handlerMarek Vasut
The inner do { ... } while loop is completely useless, all it does is iterate over a switch-case statement, one bit at a time. This can easily be replaced by simple if (status & bit) { ... } tests for each bit. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-2-marex@denx.de
2020-11-10rsi: Move card interrupt handling to RX threadMarek Vasut
The interrupt handling of the RS911x is particularly heavy. For each RX packet, the card does three SDIO transactions, one to read interrupt status register, one to RX buffer length, one to read the RX packet(s). This translates to ~330 uS per one cycle of interrupt handler. In case there is more incoming traffic, this will be more. The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be quick and to the point, so that the holding of the host lock does not cover too much work that doesn't require that lock to be held." The RS911x interrupt handler does not fit that. This patch therefore changes it such that the entire IRQ handler is moved to the RX thread instead, and the interrupt handler only wakes the RX thread. This is OK, because the interrupt handler only does things which can also be done in the RX thread, that is, it checks for firmware loading error(s), it checks buffer status, it checks whether a packet arrived and if so, reads out the packet and passes it to network stack. Moreover, this change permits removal of a code which allocated an skbuff only to get 4-byte-aligned buffer, read up to 8kiB of data into the skbuff, queue this skbuff into local private queue, then in RX thread, this buffer is dequeued, the data in the skbuff as passed to the RSI driver core, and the skbuff is deallocated. All this is replaced by directly calling the RSI driver core with local buffer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-1-marex@denx.de
2020-11-07rsi: rsi_91x_usb_ops: Source file headers are not good candidates for kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb_ops.c:22: warning: Incorrect use of kernel-doc format: * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from drivers/net/wireless/rsi/rsi_91x_usb_ops.c:29: warning: Function parameter or member 'common' not described in 'rsi_usb_rx_thread' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-5-lee.jones@linaro.org
2020-11-07rsi: rsi_91x_usb: Fix some basic kernel-doc issuesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-3-lee.jones@linaro.org
2020-11-07rsi: Fix TX EAPOL packet handling against iwlwifi APMarek Vasut
In case RSI9116 SDIO WiFi operates in STA mode against Intel 9260 in AP mode, the association fails. The former is using wpa_supplicant during association, the later is set up using hostapd: iwl$ cat hostapd.conf interface=wlp1s0 ssid=test country_code=DE hw_mode=g channel=1 wpa=2 wpa_passphrase=test wpa_key_mgmt=WPA-PSK iwl$ hostapd -d hostapd.conf rsi$ wpa_supplicant -i wlan0 -c <(wpa_passphrase test test) The problem is that the TX EAPOL data descriptor RSI_DESC_REQUIRE_CFM_TO_HOST flag and extended descriptor EAPOL4_CONFIRM frame type are not set in case the AP is iwlwifi, because in that case the TX EAPOL packet is 2 bytes shorter. The downstream vendor driver has this change in place already [1], however there is no explanation for it, neither is there any commit history from which such explanation could be obtained. [1] https://github.com/SiliconLabs/RS911X-nLink-OSD/blob/master/rsi/rsi_91x_hal.c#L238 Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201015111616.429220-1-marex@denx.de
2020-09-01rsi: rsi_91x_sdio_ops: File headers are not good kernel-doc candidatesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_sdio_ops.c:24: warning: Incorrect use of kernel-doc format: * rsi_sdio_master_access_msword() - This function sets the AHB master access drivers/net/wireless/rsi/rsi_91x_sdio_ops.c:32: warning: Function parameter or member 'adapter' not described in 'rsi_sdio_master_access_msword' drivers/net/wireless/rsi/rsi_91x_sdio_ops.c:32: warning: Function parameter or member 'ms_word' not described in 'rsi_sdio_master_access_msword' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-23-lee.jones@linaro.org
2020-09-01rsi: rsi_91x_sdio: Fix a few kernel-doc related issuesLee Jones
- File headers do not make for good kernel-doc candidates - Kernel-doc header lines should start with " *" - Fix doc-rot issue Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_sdio.c:25: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_sdio.c:802: warning: bad line: from the device. drivers/net/wireless/rsi/rsi_91x_sdio.c:842: warning: Function parameter or member 'pfunction' not described in 'rsi_init_sdio_interface' drivers/net/wireless/rsi/rsi_91x_sdio.c:842: warning: Excess function parameter 'pkt' description in 'rsi_init_sdio_interface' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200826093401.1458456-17-lee.jones@linaro.org
2020-09-01rsi: Source file headers are not suitable for kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_debugfs.c:21: warning: Incorrect use of kernel-doc format: * rsi_sdio_stats_read() - This function returns the sdio status of the driver. drivers/net/wireless/rsi/rsi_91x_debugfs.c:28: warning: Function parameter or member 'seq' not described in 'rsi_sdio_stats_read' drivers/net/wireless/rsi/rsi_91x_debugfs.c:28: warning: Function parameter or member 'data' not described in 'rsi_sdio_stats_read' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-21-lee.jones@linaro.org
2020-09-01rsi: File headers are not suitable for kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_coex.c:24: warning: Function parameter or member 'coex_cb' not described in 'rsi_coex_determine_coex_q' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-15-lee.jones@linaro.org
2020-09-01rsi: Source file headers do not make good kernel-doc candidatesLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_ps.c:26: warning: Function parameter or member 'state' not described in 'str_psstate' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-11-lee.jones@linaro.org
2020-09-01rsi: Add descriptions for rsi_set_vap_capabilities()'s parametersLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mgmt.c:713: warning: Function parameter or member 'mac_addr' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:713: warning: Function parameter or member 'vap_id' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:713: warning: Function parameter or member 'vap_status' not described in 'rsi_set_vap_capabilities' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-7-lee.jones@linaro.org
2020-09-01rsi: Add description for function param 'sta'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mac80211.c:1021: warning: Function parameter or member 'sta' not described in 'rsi_mac80211_set_key' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200821071644.109970-3-lee.jones@linaro.org
2020-09-01rsi: File header comments should not be kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_hal.c:25: warning: cannot understand function prototype: 'struct ta_metadata metadata_flash_content[] = ' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-24-lee.jones@linaro.org
2020-09-01rsi: Fix a myriad of documentation issuesLee Jones
Too many, not enough, misnamed and formatting problems, all resolved. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mgmt.c:24: warning: cannot understand function prototype: 'struct bootup_params boot_params_20 = ' drivers/net/wireless/rsi/rsi_91x_mgmt.c:487: warning: Excess function parameter 'type' description in 'rsi_mgmt_pkt_to_core' drivers/net/wireless/rsi/rsi_91x_mgmt.c:538: warning: Function parameter or member 'sta_id' not described in 'rsi_hal_send_sta_notify_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:538: warning: Function parameter or member 'vif' not described in 'rsi_hal_send_sta_notify_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:615: warning: Function parameter or member 'sta_id' not described in 'rsi_send_aggregation_params_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'mode' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'mac_addr' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'vap_id' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Function parameter or member 'vap_status' not described in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:711: warning: Excess function parameter 'opmode' description in 'rsi_set_vap_capabilities' drivers/net/wireless/rsi/rsi_91x_mgmt.c:794: warning: Function parameter or member 'sta_id' not described in 'rsi_hal_load_key' drivers/net/wireless/rsi/rsi_91x_mgmt.c:794: warning: Function parameter or member 'vif' not described in 'rsi_hal_load_key' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1053: warning: Function parameter or member 'curchan' not described in 'rsi_band_check' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1173: warning: Excess function parameter 'channel' description in 'rsi_send_radio_params_update' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1299: warning: Function parameter or member 'sta' not described in 'rsi_send_auto_rate_request' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1299: warning: Function parameter or member 'sta_id' not described in 'rsi_send_auto_rate_request' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1299: warning: Function parameter or member 'vif' not described in 'rsi_send_auto_rate_request' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'opmode' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'addr' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'sta' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'sta_id' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'assoc_cap' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Function parameter or member 'vif' not described in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1459: warning: Excess function parameter 'bssid' description in 'rsi_inform_bss_status' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1543: warning: Function parameter or member 'common' not described in 'rsi_send_block_unblock_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1543: warning: Function parameter or member 'block_event' not described in 'rsi_send_block_unblock_frame' drivers/net/wireless/rsi/rsi_91x_mgmt.c:1587: warning: Excess function parameter 'Return' description in 'rsi_send_rx_filter_frame' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-21-lee.jones@linaro.org
2020-09-01rsi: Fix a few kerneldoc misdemeanoursLee Jones
- File headers should not be kernel-doc - Misnaming issues - Missing function parameter documentation Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_mac80211.c:24: warning: cannot understand function prototype: 'const struct ieee80211_channel rsi_2ghz_channels[] = ' drivers/net/wireless/rsi/rsi_91x_mac80211.c:739: warning: Function parameter or member 'vif' not described in 'rsi_get_connected_channel' drivers/net/wireless/rsi/rsi_91x_mac80211.c:739: warning: Excess function parameter 'adapter' description in 'rsi_get_connected_channel' drivers/net/wireless/rsi/rsi_91x_mac80211.c:868: warning: Function parameter or member 'changed_flags' not described in 'rsi_mac80211_conf_filter' drivers/net/wireless/rsi/rsi_91x_mac80211.c:868: warning: Excess function parameter 'changed' description in 'rsi_mac80211_conf_filter' drivers/net/wireless/rsi/rsi_91x_mac80211.c:946: warning: Function parameter or member 'sta' not described in 'rsi_hal_key_config' drivers/net/wireless/rsi/rsi_91x_mac80211.c:1245: warning: Function parameter or member 'vif' not described in 'rsi_perform_cqm' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-19-lee.jones@linaro.org
2020-09-01rsi: Fix misnamed function parameter 'rx_pkt'Lee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_main.c:157: warning: Function parameter or member 'rx_pkt' not described in 'rsi_read_pkt' drivers/net/wireless/rsi/rsi_91x_main.c:157: warning: Excess function parameter 'rcv_pkt' description in 'rsi_read_pkt' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-18-lee.jones@linaro.org
2020-09-01rsi: File header should not be kernel-docLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_core.c:23: warning: Incorrect use of kernel-doc format: * rsi_determine_min_weight_queue() - This function determines the queue with drivers/net/wireless/rsi/rsi_91x_core.c:30: warning: Function parameter or member 'common' not described in 'rsi_determine_min_weight_queue' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-4-lee.jones@linaro.org
2020-09-01rsi: Fix some kernel-doc issuesLee Jones
The file header should not be kernel-doc. Add missing 'rec_pkt' description. Update 'rsi_91x_init()'s parameter description. Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_main.c:17: warning: Function parameter or member 'fmt' not described in 'pr_fmt' drivers/net/wireless/rsi/rsi_91x_main.c:156: warning: Function parameter or member 'rx_pkt' not described in 'rsi_read_pkt' drivers/net/wireless/rsi/rsi_91x_main.c:287: warning: Function parameter or member 'oper_mode' not described in 'rsi_91x_init' drivers/net/wireless/rsi/rsi_91x_main.c:287: warning: Excess function parameter 'void' description in 'rsi_91x_init' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200819072402.3085022-3-lee.jones@linaro.org
2020-07-13mmc: sdio: Move SDIO IDs from rsi_sdio driver to common include filePali Rohár
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-04-14rsi: fix a typo "throld" -> "threshold"Qiujun Huang
There is a typo in debug message. Fix it. s/throld/threshold Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585837078-6149-1-git-send-email-hqjagain@gmail.com
2020-02-12rsi: fix null pointer dereference during rsi_shutdown()Martin Kepplinger
Appearently the hw pointer can be NULL while the module is loaded and in that case rsi_shutdown() crashes due to the unconditional dereference. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi_91x_usb: fix interface sanity checkJohan Hovold
Make sure to use the current alternate setting when verifying the interface descriptors to avoid binding to an invalid interface. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: add missing endpoint sanity checksJohan Hovold
The driver expects at least one bulk-in endpoint when in "wifi-alone" operating mode and two bulk-in endpoints otherwise, and would otherwise fail to to submit the corresponding bulk URB to the default pipe during probe with a somewhat cryptic message: rsi_91x: rsi_rx_urb_submit: Failed in urb submission rsi_91x: rsi_probe: Failed in probe...Exiting RSI-USB WLAN: probe of 2-2.4:1.0 failed with error -8 The current endpoint sanity check looks broken and would only bail out early if there was no bulk-in endpoint but at least one bulk-out endpoint. Tighten this check to always require at least one bulk-in and one bulk-out endpoint, and add the missing sanity check for a Bluetooth bulk-in endpoint when in a BT operating mode. Also make sure to log an informative error message when the expected endpoints are missing. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix non-atomic allocation in completion handlerJohan Hovold
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface") Cc: stable <stable@vger.kernel.org> # 4.17 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix memory leak on failed URB submissionJohan Hovold
Make sure to free the skb on failed receive-URB submission (e.g. on disconnect or currently also due to a missing endpoint). Fixes: a1854fae1414 ("rsi: improve RX packet handling in USB interface") Cc: stable <stable@vger.kernel.org> # 4.17 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix use-after-free on probe errorsJohan Hovold
The driver would fail to stop the command timer in most error paths, something which specifically could lead to the timer being freed while still active on I/O errors during probe. Fix this by making sure that each function starting the timer also stops it in all relevant error paths. Reported-by: syzbot+1d1597a5aa3679c65b9f@syzkaller.appspotmail.com Fixes: b78e91bcfb33 ("rsi: Add new firmware loading method") Cc: stable <stable@vger.kernel.org> # 4.12 Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-12-18rsi: fix use-after-free on failed probe and unbindJohan Hovold
Make sure to stop both URBs before returning after failed probe as well as on disconnect to avoid use-after-free in the completion handler. Reported-by: syzbot+b563b7f8dbe8223a51e8@syzkaller.appspotmail.com Fixes: a4302bff28e2 ("rsi: add bluetooth rx endpoint") Fixes: dad0d04fa7ba ("rsi: Add RS9113 wireless driver") Cc: stable <stable@vger.kernel.org> # 3.15 Cc: Siva Rebbagondla <siva.rebbagondla@redpinesignals.com> Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com> Cc: Fariya Fatima <fariyaf@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-11-05Merge tag 'wireless-drivers-next-2019-11-05' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.5 First set of patches for 5.5. The most active driver here clearly is rtw88, lots of patches for it. More quiet on other drivers, smaller fixes and cleanups all over. This pull request also has a trivial conflict, the report and example resolution here: https://lkml.kernel.org/r/20191031111242.50ab1eca@canb.auug.org.au Major changes: rtw88 * add deep power save support * add mac80211 software tx queue (wake_tx_queue) support * enable hardware rate control * add TX-AMSDU support * add NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 support * add power tracking support * add 802.11ac beamformee support * add set_bitrate_mask support * add phy_info debugfs to show Tx/Rx physical status * add RFE type 3 support for 8822b ath10k * add support for hardware rfkill on devices where firmware supports it rtl8xxxu * add bluetooth co-existence support for single antenna iwlwifi * Revamp the debugging infrastructure ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-09rsi: drop bogus device-id checks from probeJohan Hovold
USB core will never call a USB-driver probe function with a NULL device-id pointer. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-09Revert "rsi: fix potential null dereference in rsi_probe()"Johan Hovold
This reverts commit f170d44bc4ec2feae5f6206980e7ae7fbf0432a0. USB core will never call a USB-driver probe function with a NULL device-id pointer. Reverting before removing the existing checks in order to document this and prevent the offending commit from being "autoselected" for stable. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-04rsi: fix potential null dereference in rsi_probe()Denis Efremov
The id pointer can be NULL in rsi_probe(). It is checked everywhere except for the else branch in the idProduct condition. The patch adds NULL check before the id dereference in the rsi_dbg() call. Fixes: 54fdb318c111 ("rsi: add new device model for 9116") Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-04mac80211: simplify TX aggregation startJohannes Berg
There really is no need to make drivers call the ieee80211_start_tx_ba_cb_irqsafe() function and then schedule the worker if all we want is to set a bit. Add a new return value (that was previously considered invalid) to indicate that the driver is immediately ready for the session, and make drivers use it. The only drivers that remain different are the Intel ones as they need to negotiate more with the firmware. Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01rsi: release skb if rsi_prepare_beacon failsNavid Emamdoost
In rsi_send_beacon, if rsi_prepare_beacon fails the allocated skb should be released. Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-09-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor overlapping changes in the btusb and ixgbe drivers. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-03rsi: fix a double free bug in rsi_91x_deinit()Hui Peng
`dev` (struct rsi_91x_usbdev *) field of adapter (struct rsi_91x_usbdev *) is allocated and initialized in `rsi_init_usb_interface`. If any error is detected in information read from the device side, `rsi_init_usb_interface` will be freed. However, in the higher level error handling code in `rsi_probe`, if error is detected, `rsi_91x_deinit` is called again, in which `dev` will be freed again, resulting double free. This patch fixes the double free by removing the free operation on `dev` in `rsi_init_usb_interface`, because `rsi_91x_deinit` is also used in `rsi_disconnect`, in that code path, the `dev` field is not (and thus needs to be) freed. This bug was found in v4.19, but is also present in the latest version of kernel. Fixes CVE-2019-15504. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-19Merge tag 'wireless-drivers-next-for-davem-2019-08-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 5.4 First set of patches for 5.4. Major changes: brcmfmac * enable 160 MHz channel support rt2x00 * add support for PLANEX GW-USMicroN USB device rtw88 * add Bluetooth coexistance support ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06rsi: fix for sdio reset card issueGanapathi Kondraju
Issue: While removing and inserting the driver module, observed driver loading is not successful. Root cause: Card is not resetted completely without issuing cmd5. Fix: Issued cmd5 properly. Signed-off-by: Ganapathi Kondraju <ganapathirajukondraju@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-08-06rsi: fix for sdio interface setup in 9116Ganapathi Kondraju
Issue: RS-9116 Card is not responding after firmware got loaded. Root cause: After firmware got loaded, we need to reset the program counter and few device specific registers. Those registers were not resetted properly. Fix: Properly resetting those registers. Signed-off-by: Ganapathi Kondraju <ganapathirajukondraju@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-07-26mac80211: pass the vif to cancel_remain_on_channelEmmanuel Grumbach
This low level driver can find it useful to get the vif when a remain on channel session is cancelled. iwlwifi will need this soon. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Link: https://lore.kernel.org/r/20190723180001.5828-1-emmanuel.grumbach@intel.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-24rsi: return explicit error valuesEnrico Weigelt
Explicitly return constants instead of variable (and rely on it to be explicitly initialized), if the value is supposed to be fixed anyways. Align it with the rest of the driver, which does it the same way. Signed-off-by: Enrico Weigelt <info@metux.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-28rsi: Properly initialize data in rsi_sdio_ta_resetNathan Chancellor
When building with -Wuninitialized, Clang warns: drivers/net/wireless/rsi/rsi_91x_sdio.c:940:43: warning: variable 'data' is uninitialized when used here [-Wuninitialized] put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); ^~~~ drivers/net/wireless/rsi/rsi_91x_sdio.c:930:10: note: initialize the variable 'data' to silence this warning u8 *data; ^ = NULL 1 warning generated. Using Clang's suggestion of initializing data to NULL wouldn't work out because data will be dereferenced by put_unaligned_le32. Use kzalloc to properly initialize data, which matches a couple of other places in this driver. Fixes: e5a1ecc97e5f ("rsi: add firmware loading for 9116 device") Link: https://github.com/ClangBuiltLinux/linux/issues/464 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-25rsi: miscallaneous changes for 9116 and commonSiva Rebbagondla
Below changes are done: * Device 80MHz clock should be disabled for 9116 in 20MHz band. * Default edca parameters should be used initially before connection. * Default TA aggregation is 3 for 9116. * Bootup parameters should be loaded first when channel is changed. * 4 byte register writes are possible for 9116. Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rsi: reset device changes for 9116Siva Rebbagondla
Device reset register(watchdog timer related) addresses and values are different for 9116. Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rsi: send new tx command frame wlan9116 featuresSiva Rebbagondla
For 9116 device, we have introduced w9116 features frame, which shall be send when radio capabilities confirm is received. Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rsi: new bootup parameters for 9116Siva Rebbagondla
Bootup parameters are different for 9116 device. Check added for device model where-ever bootup parameters are being send. Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rsi: change in device init frame sequence for 9116Siva Rebbagondla
Initial frame exchange sequence has been changed for 9116 chip. Getting MAC address using EEPROM read frame will be once common device configuration is done and RESET_MAC frame is sending after bootup parameters confirmation is received, which are different from RS9113 device Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-25rsi: add firmware loading for 9116 deviceSiva Rebbagondla
New firmware files and firmware loading method are added for 9116. Signed-off-by: Siva Rebbagondla <siva8118@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 21:05:41 +0000